Preparation and nonlinear characterization of zinc selenide nanoparticles embedded in polymer matrix

Nanocomposites of ZnSe nanoparticles embedded in polyvinyl alcohol (PVA) matrix have been prepared by in-situ synthesis. ZnSe/PVA nanocomposites are characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and UV/Vis spectra. The nanocomposite structure is confirmed by the blue-shift of the absorption edge. The nonlinear refractive index and two-photon absorption (TPA) coefficient are measured by the Z-scan technique using low power CW He–Ne laser light. The results show that the ZnSe nanocomposite films show large optical nonlinearity and the magnitude of the third-order nonlinear susceptibility χ⁽³⁾ is calculated to be 2.62×13^?11 m²/V².     

Synthesis of nanoparticles and preparation and characterization of nanopolymer matrix composites

In this study, nano α-alumina particles were synthesized by a sol–gel method using aqueous solutions of aluminum isopropoxide and 0.5?M aluminum nitrate. 1/3-benzene disoulfonic acid disodium salt (SDBS) and fluoride were used as surfactant stabilizing agent and additive, respectively. Results indicated that the finest size for nonagglomerated nanoalumina particles (15–20?nm) was achieved at 950?°C. The next part was about preparing PP nanocomposite containing nano α-Al₂O₃ particles. Mechanical tests, such as tensile, flexural, and impact tests showed that mechanical properties of the composite were enhanced by addition of nano α-Al₂O₃ particles and dispersant to the polymer. However, higher concentration of nano α-Al₂O₃ loading resulted in reduction of those mechanical properties, which could be due to agglomeration of nano α-Al₂O₃ particles. Transmission and scanning electron microscopic observations of the nanocomposites also showed that fracture surface became more roughened by increasing the content of filler loading from 1 to 4% wt.     

Synthesis and characterization of Sb-doped CdTe films

Antimony doped CdTe films electrodeposited in a non-aqueous bath have been characterized using in- and ex-situ techniques. Cyclic voltammetry in dark and under illumination has been used as an in-situ probe to investigate Sb incorporation. The effect of Sb-doping on the composition, structure, morphology, optical and electronic properties have also been investigated using XPS, PIXE, XRD, SEM, AFM, Optical Absorption spectroscopy, resistivity and thermoemf measurements.     

ZnO nanoparticles embedded in UVM-7-like mesoporous silica materials: Synthesis and characterization

ZnO nanodomains embedded in bimodal mesoporous silica (UVM-7) materials with high Zn content (4≤Si/Zn≤30) have been synthesized by an one-pot surfactant-assisted procedure from a hydro alcoholic medium using a cationic surfactant (CTMABr=cetyltrimethylammonium bromide) as structural directing agent, and starting from molecular atrane complexes of Zn and Si as hydrolytic inorganic precursors. This chemical procedure allows optimizing the dispersion of the ZnO particles in the silica walls. The bimodal mesoporous nature of the final high surface area nano-sized materials is confirmed by XRD, TEM, and N₂ adsorption–desorption isotherms. The small intra-particle mesopore system is due to the supramolecular templating effect of the surfactant, while the large pores have their origin in the packing voids generated by aggregation of the primary nanometric mesoporous particles. A limited pore blocking and a high accessibility to the ZnO active nanoparticles have been achieved. The effects induced by the progressive incorporation of ZnO nanoparticles into the mesostructure have been examined, including a careful optical spectroscopic study (PL and UV–visible).     

Photoluminescence of CdS nanoparticles embedded in a starch matrix

CdS nanoparticles were synthesized by precipitation in aqueous solution using starch as the capping molecule, and the effect of the pH of the solution on the optical absorption, photoluminescence, and size of the nanoparticles was studied. Absorption spectra, obtained by photoacoustic spectroscopy, indicated that the band gap energy of the crystalline nanoparticles decreased from 2.68 eV down to 2.48 eV by increasing the pH of the solution from 9 up to 14. The X-ray diffraction analysis revealed that the CdS nanoparticles were of zinc blende structure, and that the particle size increased from 1.35 nm up to 2.45 nm with increasing pH. In addition, temperature-dependent photoluminescence (PL) measurements of the capped material showed a blue-shift of the emission peak for temperatures higher than 150 K, indicating the influence of starch on the formation of defect levels on the surface of the CdS nanoparticles.     

Stability of rod-shaped nanoparticles embedded in an elastic matrix

In many biological tissues as well as in some technical materials we find nano-sized rod-shaped particles embedded in a relatively soft matrix. Loss of stability of equilibrium, i.e. buckling, is one of the possible failure modes of such materials. In the present paper different kinds of load transfer between matrix and reinforcing particles, which are typical for rod-shaped nanostructures in biological tissues, are considered with respect to stability of equilibrium. Two regimes of matrix stiffnesses leading to different modes of buckling, and a transition regime in between, have been found: soft matrix materials leading to the so-called ‘flip mode’ (also called ‘tilt mode’) and hard matrix materials resulting in ‘bending mode’ buckling. The transition regime is of particular interest for biological tissues. Numerical and semi-analytical as well as asymptotic concepts are employed leading to results for estimating the critical load intensities both in the form of closed form solutions and diagrams. The analytical solutions are compared with results of finite element analyses. From these comparisons indications are gained for deciding which of the different analytical approaches should be chosen for a particular nanostructure configuration in terms of the associated buckling modes.     

Synthesis, structural and optical characterization of nanocrystalline ZnS:Cu embedded in silica matrix

The synthesis of Cu doped ZnS nanoparticles inside the pore of an inorganic silica gel matrix is presented. The synthesized nanoparticles were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). X-ray diffraction pattern reveals the crystalline wurtzite phase of ZnS. The existence of silica gel in modeling morphologies of the nanoparticles was characterized using Fourier transform infrared (FTIR) spectrometer. Thickness of the silica shell was also calculated. UV- absorption spectrum shows the appearance of an absorption peak at 273 nm which confirms the blue shift as compared to that of bulk ZnS. The photoluminescence (PL) emission spectrum of the sample showed a broad band in the range 465-510 nm due to the transition from the conduction band edge of ZnS nanocrystals to the acceptor like t₂ state of Cu.     

Synthesis and characterization of brightly photoluminescent CdTe nanocrystals

A new synthesis procedure for the preparation of spherical shaped CdTe nanocrystals (NCs) is presented, exhibiting bright luminescence with exceptionally high quantum efficiency (up to 85%). The growth of these NCs occurs in a non-coordinating solvent, octadecene, with the addition of oleic acid/tri-octylphosphine stabilizers, CdO as a precursor for the Cd monomers and additional Cd metal particles as a supplementary Cd reservoir source. The dependence of the crystalline quality and the optical properties of the CdTe NCs, on the initial Cd:Te precursors’ molar ratio, and the reaction duration were investigated. It was demonstrated that the NCs’ properties improved significantly as the initial Cd:Te molar ratios are increased. The obtained NCs’ properties were correlated with measurements of the Cd⁰ concentration in Cd metal particles, CdTe NCs and in Cd monomer solutions.     

Exchange bias in Co nanoparticles embedded in an Mn matrix

Magnetic properties of Co nanoparticles of 1.8 nm diameter embedded in Mn and Ag matrices have been studied as a function of the volume fraction (VFF). While the Co nanoparticles in the Ag matrix show superparamagnetic behavior with T_B=9.5 K (1.5% VFF) and T_B=18.5 K (8.9% VFF), the Co nanoparticles in the antiferromagnetic Mn matrix show a transition peak at ∼65 K in the ZFC/FC susceptibility measurements, and an increase of the coercive fields at low temperature with respect to the Ag matrix. Exchange bias due to the interface exchange coupling between Co particles and the antiferromagnetic Mn matrix has also been studied. The exchange bias field (H_eb), observed for all Co/Mn samples below 40 K, decreases with decreasing volume fraction and with increasing temperature and depends on the field of cooling (H_fc). Exchange bias is accompanied by an increase of coercivity.     

Synthesis of CoFe2O4 nanoparticles embedded in a silica matrix by the citrate precursor technique

A metals–citrate–silica gel was prepared from metallic salts, citric acid and tetraethylorthosilicate by sol–gel method (citrate precursor technique) and it was further used to prepare magnetic nanocomposites. The gel was dried at 100 °C and then calcined at temperatures between 600 and 1000 °C to obtain powder samples. The nanocomposites were characterized by XRD, IR, VSM and TEM techniques. The diffraction patterns show the formation of a single magnetic phase identified as CoFe₂O₄. Magnetic nanoparticles with average size less than 50 nm were obtained which are well dispersed in the silica matrix. The combination of different metals concentrations and calcining temperatures allowed obtaining samples with magnetization ranging from 3.6 to 25.3 emu/g.     

Synthesis and stabilization of ZnS nanoparticles embedded in silica nanospheres

The silica-coated ZnS nanocomposites have been synthesized by a seeded-growth procedure in iso-propanol. The results of XRD, HRTEM and UV absorption show that the ZnS nanoparticles can be incorporated in the silica nanospheres without changing the particle size, and the composites are of multi-core structure. UV absorption and emission spectra have been performed to check the character of the composites, which show that the silica shell not only increases the PL intensity, but also greatly improves the anti-oxidation ability and thermal stability. PACS 81.05.Dz; 81.16.Be; 81.65.Rv; 78.55.Et; 78.66.Hf     

Anomalous magnetic antiresonance and resonance in ferrite nanoparticles embedded in opal matrix

Observation of magnetic antiresonance phenomenon is reported in 3D opal nanocomposite with embedded ferrite particles. Antiresonance at microwave frequencies of millimeter waveband was observed. It results in a sharp maximum of the reflection coefficient of an electromagnetic wave. Measurements were carried out in the frequency range from 26 to 38 GHz for two compositions of embedded ferrite particles, namely, the Co_0.5Zn_0.5Fe₂O₄ and Ni_0.5Zn_0.5Fe₂O₄. The physical nature of antiresonance is discussed.     

Synthesis and optical characterization of nanocrystalline CdTe thin films

From several years the study of binary compounds has been intensified in order to find new materials for solar photocells. The development of thin film solar cells is an active area of research at this time. Much attention has been paid to the development of low cost, high efficiency thin film solar cells. CdTe is one of the suitable candidates for the production of thin film solar cells due to its ideal band gap, high absorption coefficient. The present work deals with thickness dependent study of CdTe thin films. Nanocrystalline CdTe bulk powder was synthesized by wet chemical route at pH≈11.2 using cadmium chloride and potassium telluride as starting materials. The product sample was characterized by transmission electron microscope, X-ray diffraction and scanning electron microscope. The structural characteristics studied by X-ray diffraction showed that the films are polycrystalline in nature. CdTe thin films with thickness 40, 60, 80 and 100 nm were prepared on glass substrates by using thermal evaporation onto glass substrate under a vacuum of 10⁻⁶ Torr. The optical constants (absorption coefficient, optical band gap, refractive index, extinction coefficient, real and imaginary part of dielectric constant) of CdTe thin films was studied as a function of photon energy in the wavelength region 400–2000 nm. Analysis of the optical absorption data shows that the rule of direct transitions predominates. It has been found that the absorption coefficient, refractive index (n) and extinction coefficient (k) decreases while the values of optical band gap increase with an increase in thickness from 40 to 100 nm, which can be explained qualitatively by a thickness dependence of the grain size through decrease in grain boundary barrier height with grain size.     

Synthesis and characterization of CdS/PVA nanocomposite films

A series CdS/PVA nanocomposite films with different amount of Cd salt have been prepared by means of the in situ synthesis method via the reaction of Cd²⁺-dispersed poly vinyl-alcohol (PVA) with H₂S. The as-prepared films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, photoluminescence (PL) spectra, Fourier transform infrared spectroscope (FTIR) and thermogravimetric analysis (TGA). The XRD results indicated the formation of CdS nanoparticles with hexagonal phase in the PVA matrix. The primary FTIR spectra of CdS/PVA nanocomposite in different processing stages have been discussed. The vibrational absorption peak of CdS bond at 405 cm⁻¹ was observed, which further testified the generation of CdS nanoparticles. The TGA results showed incorporation of CdS nanoparticles significantly altered the thermal properties of PVA matrix. The photoluminescence and UV-vis spectroscopy revealed that the CdS/PVA films showed quantum confinement effect.     

Discrete angle rotations of Bi nanoparticles embedded in a Ga matrix

Spontaneous instabilities of nanoparticles are known to be influenced by the temperature, and strongly depend on the particle size. However, it is not clear what is the role of the surrounding material that is in contact with the particle. Here we report on the difference between spontaneous rotations of Bi nanoparticles embedded in amorphous SiO and those embedded in liquid Ga. The phenomenon was studied quantitatively by time resolved transmission electron microscopy using Fourier Transform analysis of highresolution electron microscopy images. While rotations of Bi nanoparticles embedded in amorphous SiO occur by all angles, the rotations of Bi nanoparticles embedded in liquid Ga occur by discrete angles. Our results point quantitatively, for the first time, to the role and importance of the contacting surrounding surface during the rotation of nanoparticles.     

Optical nonlinearities of Au nanoparticles embedded in a zinc oxide matrix

Optical nonlinearities of Au nanoparticles embedded in zinc oxide (ZnO) matrix have been investigated by the Z-scan method at the wavelength of 532 nm using nanosecond Nd³⁺:YAG laser radiation. The nonlinear refractive index has been measured and the real part of the third-order nonlinear susceptibility is deduced. The results of the investigation of nonlinear refraction using the off-axis Z-scan configuration are presented and the mechanisms responsible for the nonlinear response are discussed. The nonlinear refraction is found to be negative (self-defocusing) in the vicinity of the surface plasmon resonance. Moreover, its strength is shown to be larger for materials having higher gold concentration. Finally, the prevailing influence of the electronic Kerr effect over the possible thermo-optical contribution is demonstrated.     

Atomic motion in Se nanoparticles embedded into a porous glass matrix

By neutron diffraction it was shown that nanostructured Se confined within a porous glass matrix exists in a crystalline as well as in an amorphous state. The spontaneous crystallization of crystalline Se from confined amorphous phase was observed. The root-mean-square amplitudes of the atomic motions in the bulk as well as in confinement are found to be essentially different in a basal plane and in the perpendicular direction along the hexagonal axis. The atomic motions in the confined Se differ from the atomic motions in the bulk at low temperatures. The results shows an unusual “freezing" of the atomic motion along the chains, while the atomic motions in the perpendicular plane still keep. This “freezing" is accompanied by the deformation of nanoparticles and the appearance of inner stresses. This effect is attributed to the interaction of confined nanoparticle with the cavity walls.     

Linear and nonlinear optical properties of luminescent ZnO nanoparticles embedded in PMMA matrix

ZnO nanoparticles embedded in the PMMA matrix were prepared by wet chemical synthesis. The optical band gap of the ZnO nanoparticles decreases with increase in NaOH concentration. The photoluminescence spectra of the ZnO colloids show strong UV, green and blue emissions. The optical absorptive nonlinearity of the ZnO:PMMA composites was analyzed using an open aperture Z-scan technique which shows optical limiting type nonlinearity due to the two photon absorption in ZnO. The efficiency of limiting is found to increase with decrease in the band gap. ZnO:PMMA shows a negative value for nonlinear refractive index n₂ and the magnitude of n₂ increases with decrease of band gap. Stability as well as the mechanical properties of the nanoparticles embedded in the PMMA matrix makes it more suitable for device fabrication as compared to the ZnO nanoparticles dispersed in solution.     

Optical characterization of the polymer embedded alloyed bimetallic nanoparticles

A theoretical approach for the calculation of the bimetallic nanoparticles absorption spectra has been developed as an extension of the Mie theory in which nanoparticle dielectric function is found by the weighted linear combination of the dielectric functions for particles made of the corresponding pure metals. In the frame work of the theoretical model an expression for the resonance light absorption frequency were derived taking into account the interband transitions in the dielectric functions. We propose a simple method for the on-line monitoring of the bimetallic nanoparticles composition based on the measurement of the absorption peak position. Elaborated theoretical approach was used to investigate the polymer embedded Ag/Au nanoparticles which were prepared by reducing gold and silver salts (HAuCl4 and AgNO3, respectively) by ethylene glycol in presence of poly(vinyl pyrrolidone) (PVP) at room temperature. Calculated absorption spectra for the Ag/Au nanoscopic systems showed good agreement with the experimental data. Temporal evolution of the Ag/Au nanoparticles has also been investigated by this approach.