Electrospun nanofibers of poly(ethylene oxide)/teraamino-phthalocyanine copper(II) hybrids and its photoluminescence properties

Poly(ethylene oxide)/teraamino-phthalocyanine copper (II) (PEO/(NH₂)₄PcCu) hybrid nanofibers with a diameter of 200-300 nm were prepared by electrospinning technique. The hybrid nanofibers membrane was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), ultraviolet-visible (UV-vis), and photoluminescence (PL), respectively. The results indicated that (NH₂)₄PcCu molecule was successfully embedded in the one-dimensional hybrid nanofibers via chemical interaction between PEO and (NH₂)₄PcCu. The PL results showed that the PEO/(NH₂)₄PcCu hybrid nanofibers had an intense emission at about 450 nm. A possible PL mechanism was proposed accordingly.     

HOT infrared photodetectors

At present, uncooled thermal detector focal plane arrays are successfully used in staring thermal imagers. However, the performance of thermal detectors is modest, they suffer from slow response and they are not very useful in applications requiring multispectral detection. Infrared (IR) photon detectors are typically operated at cryogenic temperatures to decrease the noise of the detector arising from various mechanisms associated with the narrow band gap. There are considerable efforts to decrease system cost, size, weight, and power consumption to increase the operating temperature in so-called high-operating-temperature (HOT) detectors. Initial efforts were concentrated on photoconductors and photoelectromagnetic detectors. Next, several ways to achieve HOT detector operation have been elaborated including non-equilibrium detector design with Auger suppression and optical immersion. Recently, a new strategies used to achieve HOT detectors include barrier structures such as nBn, material improvement to lower generation-recombination leakage mechanisms, alternate materials such as superlattices and cascade infrared devices. Another method to reduce detector’s dark current is reducing volume of detector material via a concept of photon trapping detector. In this paper, a number of concepts to improve performance of photon detectors operating at near room temperature are presented. Mostly three types of detector materials are considered — HgCdTe and InAsSb ternary alloys, and type-II InAs/GaSb superlattice. Recently, advanced heterojunction photovoltaic detectors have been developed. Novel HOT detector designs, so called interband cascade infrared detectors, have emerged as competitors of HgCdTe photodetectors.     

Electrospun composite nanofibers for functional applications

In this article an outline of studies conducted to date utilizing the process of electrospinning is presented. This overview for the first time focuses on research of composite nanofiber synthesis and their applications. The phenomenon of bringing materials to the nanometer scale not only improves their properties, but also creates entirely new ones. The electrospinning technique is a simple and versatile method that offers a time and cost effective production of strategic combinations of polymer and composites nanofibers useful for numerous applications highlighted in this review. The future prospects of the field are also examined.     

Uncooled infrared photodetectors in Poland

The history and present status of the middle and long wavelength Hg_1-xCd_xTe infrared detectors in Poland are reviewed. Research and development efforts in Poland were concentrated mostly on uncooled market niche. Technology of the infrared photodetectors has been developed by several research groups. The devices are based on mercury-based variable band gap semiconductor alloys. Modified isothermal vapour phase epitaxy (ISOVPE) has been used for many years for research and commercial fabrication of photoconductive, photoelectromagnetic and other devices. Bulk growth and liquid phase epitaxy was also used. At present, the fabrication of IR devices relies on low temperature epitaxial technique, namely metalorganic vapour phase deposition (MOCVD), frequently in combination with the ISOVPE. Photoconductive and photoelectromagnetic detectors are still in production. The devices are gradually replaced with photovoltaic devices which offer inherent advantages of no electric or magnetic bias, no heat load and no flicker noise. Potentially, the PV devices could offer high performance and very fast response. At present, the uncooled long wavelength devices of conventional design suffer from two issues; namely low quantum efficiency and very low junction resistance. It makes them useless for practical applications. The problems have been solved with advanced 3D band gap engineered architecture, multiple cell heterojunction devices connected in series, monolithic integration of the detectors with microoptics and other improvements. Present fabrication program includes devices which are optimized for operation at any wavelength within a wide spectral range 1–15 μm and 200–300 K temperature range. Special solutions have been applied to improve speed of response. Some devices show picoseconds range response time. The devices have found numerous civilian and military applications. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 59570K (2005).     

Photon parameter characterization of infrared photodetectors

An alternative formulation of IR photodetector theory in photon parameter terms is examined and it is shown that within such a formulation, subsystem figures-of-merit such as SNR and NETD may be separated entirely into factors describing respectively the system geometry, noise bandwidth, signal-to-background contrast, atmospheric transmission, background-to-noise ratio and detector linearity. For the evaluation of signal current, a dimensionless photon responsivity is introduced, analogous to the standard current responsivity. A special feature is the specification of the IR background current as an inherent part of the formalism. In this respect, r.m.s. noise currents may be determined from values of an alternative specific quantity, the specific background-to-noise ratio B¹, that is used in place of the standard specific detectivity D¹. Simple relationships are derived for conversion between responsivity and photon responsivity, and between the standard detectivity D¹ and B¹.     

Performance investigations of quantum dot infrared photodetectors

Quantum dot infrared photodetectors (QDIPs) have already attracted more and more attention in recent years due to a high photoconductive gain, a low dark current and an increased operating temperature. In the paper, a device model for the QDIP is proposed. It is assumed that the total electron transport and the self-consistent potential distribution under the dark conditions determine the dark current calculation of QDIP devices in this model. The model can be used for calculating the dark current, the photocurrent and the detectivity of QDIP devices, and these calculated results show a good agreement with the published results, which illustrate the validity of the device model.     

Non-Gaussian noise in quantum wells infrared photodetectors

Non-Gaussian dark current noise has been observed in quantum wells infrared photo detectors. The non-Gaussian component of the noise was ascribed to fluctuations of spatial distribution of electric field in the device. Non-Gaussian noise was found in both n- and p-type QWIPs, however, it was significantly less pronounce. In n-type devices non-Gaussian noise manifests itself only as randomly distributed excess current bursts. In p-type QWIPs the non-Gaussian noise takes form of bias dependent random telegraph-like fluctuations with a finite time of transition between the levels. The lifetime at both levels is Poisson distributed and the average lifetime, together with the level spacing, strongly depend on bias voltage. At low voltages the system stays predominantly in the low current level while at higher voltages the average lifetime of the high current level is longer. The transient time of passing between the states has been related to the charging time constant of the system determined by QWIP capacitance and contacts resistance.     

量子点红外探测器的噪声表征

为了表征噪声对量子点红外探测器性能的影响, 本文推导了噪声的理论模型. 该模型通过考虑纳米尺度电子传输和微米尺度电子传输对激发能的共同影响, 并结合噪声增益, 实现了对噪声的估算. 得到的结果与实验的数据相比, 显示了很好的一致性, 从而验证了这个模型的正确性. 关键词： 电子传输 暗电流 增益 噪声     

Comparative study between different quantum infrared photodetectors

This paper presents a theoretical analysis for the dark current characteristics of different quantum infrared photodetectors. These quantum photodetectors are quantum dot infrared photodetectors (QDIP), quantum wire infrared photodetectors (QRIP), and quantum well infrared photodetectors (QWIP). Mathematical models describing these devices are introduced. The developed models accounts for the self-consistent potential distribution. These models are taking the effect of donor charges on the spatial distribution of the electric potential in the active region. The developed model is used to investigate the behavior of dark current with different values of performance parameters such as applied voltage, number of quantum wire (QR) layers, QD layers, lateral characteristic size, doping quantum wire density and temperature. It explains strong sensitivity of dark current to the density of QDs/QRs and the doping level of the active region. In order to confirm our models and their validity on the practical applications, a comparison between the results obtained by proposed models and that experimentally published are conducted and full agreement is observed. Several performance parameters are tuned to enhance the performance of these quantum photodetectors through the presented modeling. The resultant performance characteristics and comparison among them are presented in this work. From the obtained results we notice that the total dark current in the QRIPs can be significantly lower than that in the QWIPs. Moreover, main features of the QRIPs such as the large gap between the induced photocurrent and dark current open the way for overcoming the problems of quantum dot infrared photodetectors.     

近红外光电探测器的发展与应用

近红外光电探测器在军事和国民经济中应用广泛,如航空航天、光通信、工业控制、近红外成像等领域。文章首先讲述了近红外光电探测器的发展历史、工作原理和基本应用情况。通过比较各类光电探测器的性能参数,可以看出基于纳米材料的近红外光电探测器具有很高的响应度、探测率和响应速度。然后,文章将着重介绍近红外光电探测器在光纤通信、无人驾驶、模式识别和光电耦合等领域的发展情况及相关原理。最后,文章对近红外光电探测器的发展前景进行了展望。未来近红外光电探测器将全面应用于各大领域,但是高端的材料生长技术、高效的光电转化方法以及大规模光电器件集成工艺等方面的不足依旧是限制纳米光电探测器发展的主要因素。     

Characteristics and developments of quantum-dot infrared photodetectors

Quantum dots infrared photodetectors (QDIPs) theoretically have several advantages compared with quantum wells infrared photodetectors (QWIPs). In this paper, we discuss the theoretical advantages of QDIPs including the normal incidence response, lower dark current, higher responsivity and detectivity, etc. Recent device fabrication and experiment results in this field are also presented. Based on the analysis of existing problems, some approaches that would improve the capability of the device are pointed out.     

红外波长上转换器件中载流子阻挡结构的研究

复杂半导体材料结构中的载流子分布特性对器件性能有重要影响. 本文针对一种新型的波长上转换红外探测器, 研究了载流子阻挡结构对载流子分布和器件特性的影响. 论文通过自洽求解薛定谔方程、泊松方程、电流连续性方程和载流子速率方程分析了不同器件结构中的空穴分布. 同时, 生长了相应结构的外延材料, 并通过电致荧光谱分析了载流子阻挡结构对器件特性的影响. 结果表明, 2 nm厚的AlAs势垒层既能有效阻挡空穴又不影响电子输运, 有利于制作波长上转换红外探测器. 此外, 论文分析了阻挡势垒层的厚度和高度以及工作温度对载流子分布的影响. 本文研究结果亦可应用于其他载流子非均匀分布的半导体器件.     

Short-wave infrared InGaAs photodetectors and focal plane arrays

In this article, unique spectral features of short-wave infrared band of 1 μm–3 μm, and various applications related to the photodetectors and focal plane arrays in this band, are introduced briefly. In addition, the different material systems for the devices in this band are outlined. Based on the background, the development of lattice-matched and wavelengthextended InGaAs photodetectors and focal plane arrays, including our continuous efforts in this field, are reviewed. These devices are concentrated on the applications in spectral sensing and imaging, exclusive of optical fiber communication.     

New material systems for third generation infrared photodetectors

Third-generation infrared (IR) systems are being developed nowadays. In the common understanding, these systems provide enhanced capabilities-like larger numbers of pixels, higher frame rates, and better thermal resolution as well as multicolour functionality and other on-chip functions. In this class of detectors, two main competitors, HgCdTe photodiodes and quantum-well photoconductors, have being developed. Recently, two new material systems have been emerged as the candidates for third generation IR detectors, type II InAs/GaInSb strain layer superlattices (SLSs) and quantum dot IR photodetectors (QDIPs). In the paper, issue associated with the development and exploitation of multispectral photodetectors from these new materials is discussed. Discussions is focused on most recently on-going detector technology efforts in fabrication both photodetectors and focal plane arrays (FPAs). The challenges facing multicolour devices concerning complicated device structures, multilayer material growth, and device fabrication are described.     

量子点红外探测器的特性与研究进展

半导体材料红外探测器的研究一直吸引人们非常广泛的兴趣．以量子点作为有源区的红外探测器从理论上比传统量子阱红外探测器具有更大的优势．文章讨论了量子点红外探测器几个重要的优点，包括垂直入射光响应、高光电导增益、更低的暗电流、更高的响应率和探测率，等等．此外，报道了量子点红外探测器研究中一些最新的实验结果．在此基础上，分析了现存问题，并提出了进一步提高器件性能的几种可能途径．     

Electrospun precursor carbon nanofibers optimization by using response surface methodology

Ultrafine fibers were electrospun from Polyacrylonitrile and N,N-dimethylformamide solution to be used as a precursor for carbon nanofibers. An electrospinning set-up was used to collect fibers with diameter ranging from 104 nm to 434 nm. Morphology of fibers and its distribution were investigated by varying Berry's number, charge density, spinning angle, spinneret diameter and collector area. A more systematic understanding of process parameters was obtained and a quantitative relationship between electrospinning parameters and average fiber diameter was established by using response surface methodology. It was concluded that; Berry's number, charge density and spinneret diameters played an important role to the diameter of nanofibers and its standard deviation. Spinning angle and collector area had no significant impact. Based on response surface methodology the optimum Polyacrylonitrile average fiber diameter of 280 nm and 28 nm standard deviation, were collected at 1.6 kV/cm charge density, 8 Berry's number and 0.9 mm spinneret diameter.     

Temperature dependent responsivity of quantum dot infrared photodetectors

Temperature dependent behavior of the responsivity of InAs/GaAs quantum dot infrared photodetectors was investigated with detailed measurement of the current gain. The current gain varied about two orders of magnitude with 100 K temperature change. Meanwhile, the change in quantum efficiency is within a factor of 10. The dramatic change of the current gain is explained by the repulsive coulomb potential of the extra carriers in the QDs. With the measured current gain, the extra carrier number in QDs was calculated. More than one electron per QD could be captured as the dark current increases at 150 K. The extra electrons in the QDs elevated the Fermi level and changed the quantum efficiency of the QDIPs. The temperature dependence of the responsivity was qualitatively explained with the extra electrons.     

Quadratic detection with two-photon quantum well infrared photodetectors

Two-photon quantum well infrared photodetectors (QWIPs) involving three equidistant subbands take advantage of a resonantly enhanced optical nonlinearity, which is six orders of magnitude stronger than in a bulk semiconductor. This approach results in a sensitive device to measure quadratic autocorrelation of mid-infrared optical pulses from modelocked quantum cascade lasers, nonlinear optical conversion, and free-electron lasers (FEL). We report on autocorrelation measurements at wavelengths in the mid-infrared and Terahertz regimes using ps optical pulses from the FEL at the Forschungszentrum Dresden Rossendorf. In particular, quadratic detection at wavelengths around 5.5 μm is still possible at room-temperature, which is crucial for applications in practical systems. We also report on a two-photon detector which works below the Reststrahlen band at 42 μm (7.1 THz).