Influence of Li dopants on thermoluminescence spectra of CaSO4 doped with Dy or Tm

Thermoluminescence emission spectra are presented for lithium doped variants of CaSO₄:Dy or CaSO₄:Tm dosimetry material. All three dopants (Li, Dy and Tm) variously introduce different changes in both the glow peak temperatures and the luminescence efficiency. In every case the emission signals display the line emission characteristic of the rare earth ions. At temperatures below ∼50 K the relative peak intensities differ for Dy and Tm doped samples, and there are small temperature shifts between the Dy:Li and Tm:Li co-doped materials. Above room temperature the rare earth ions do not show peak temperature movements when co-doped with lithium. However they do influence the peak temperature by ∼5 °C when they are the sole dopant. Inclusion of lithium dramatically moves the high temperature glow peak from ∼200 °C down to 120 °C. All these changes are consistent with a single defect model in which the trapping sites and luminescence occur within the complexes formed of the rare earth ion, an intrinsic sulphate defect and lithium. The evidence and rationale for such a model are presented. There is discussion which suggests that such defect complexes are the norm in thermoluminescence.     

Physical and optical properties of Li2O-MgO-B2O3 doped with Dy3+

The study on the optical properties of alkali borate glasses doped with rare earths is an interesting area of research. Dysporosium doped lithium magnesium borate glasses were prepared by melt-quenching technique with dysporosium concentration varying from 0.3 to 1.0 mol %. Physical and optical properties of Lithium Magnesium Borate doped with different concentration of Dy³⁺ were observed based on its physical parameters, emission spectra and absorption spectra. The absorption spectra of this study exhibits eight absorption bands with hypersensitive peak at 1260 nm (⁶ H _9/2). Two emitted spectra transitions were also observed at ⁴ F _9/2 → ⁶ H _15/2, ⁴ F _9/2 → ⁶ H _13/2. Lastly, important physical parameters for each concentration of dopant such as density, ions concentration, polaron radius, inter-nuclear distance, refractive index, oscillator strength and other parameters were determined.     

Photoluminescence properties of Li6CaB3O8.5: M3+ (M3+: Dy and Sm)

Li₆CaB₃O_8.5: M³⁺ (M³⁺: Dy and Sm) phosphors were synthesized by a solution combustion synthesis. The synthesized materials were characterized by using the powder XRD. The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorometer. Both Li₆CaB₃O_8.5: Dy³⁺ and Li₆CaB₃O_8.5: Sm³⁺ phosphors emit red, yellow and green light. Consequently, these materials are promising phosphors for white LEDs.     

Optical absorption and fluorescence studies of Dy3+-doped lead telluroborate glasses

Lead telluroborate (PTBDy) glasses doped with different Dy³⁺ ion concentrations were prepared by melt quenching technique and investigated through optical absorption, fluorescence and decay measurements. The Judd–Ofelt intensity parameters (Ω_λ) are obtained by a least square fit analysis. The small root mean square deviation of ±0.34×10^?6 shows a good fit between the experimental and calculated oscillator strengths. The radiative properties of the ⁴F_9/2→⁶H_13/2 emission transition of PTBDy10 glass are determined and compared to the other reported glasses. The variation of decay time of the ⁴F_9/2 emission state is attributed to the interaction among the excited Dy³⁺ ions at higher concentration. The PTBDy10 glass is found to be a suitable candidate for solid state laser materials to produce intense yellow (576 nm) luminescence through the ⁴F_9/2→⁶H_13/2 transition.     

Emission analysis of Li6LuY(BO3)3:Tb3+,Dy3+ phosphors

In this paper, we present the synthesis and luminescence properties of Tb³⁺ and Dy³⁺-doped lithium lutetium yttrium borate (Li₆LuY(BO₃)₃) phosphors. We have adopted the well-known solid state reaction method for the synthesis of these phosphors. The emission intensities of the synthesized phosphors were found to reach their maximum, when doped by 1 mol% of Tb³⁺ and 3 mol% of Dy³⁺, beyond which emission intensities decrease due to concentration quenching. The homogeneous phase, crystalline structure and uniform morphology of the synthesized phosphors were confirmed by X-ray diffraction analysis (XRD) and Scanning electron microscopy (SEM). The X-ray and UV–VIS-induced luminescence, decay time and CIE chromaticity were investigated for the synthesized phosphors.The X-ray induced integrated light yield was measured to be 82% for Li₆LuY(BO₃)₃:Tb³⁺ (LLYBO) and 59% for Li₆LuY(BO₃)₃:Dy³⁺ of that of commercially available X-ray imaging material; Gd₂O₂S:Tb³⁺ (Gadox).LLYBO:Tb³⁺ phosphor displayed five major emission bands that correspond to ⁵D_j → ⁷F_j transitions. The 1931 Commission Internationale de l'Eclairage (CIE) chromaticity coordinates were also measured.     

Influence of Gd3+ and Dy3+ co-doping and sintering regime on enhancement of electrical conductivity of ceria-based solid electrolyte

In order to improve the conductivity of ceria-based solid electrolytes, effect of co-doped Gd³⁺ and Dy³⁺ was evaluated. For this purpose, nano-crystalline Gd_0.2???x Dy _x Ce_0.8O_1.9 powders with various composition ranges (x?=?0.05, 0.1, 0.15, 0.2) were initially synthesized by high-energy milling method. The effect of micro-structural evolution and co-doping on electrical properties of the dense sintered samples fabricated by two-step sintering and conventional sintering of the synthesized powders were investigated. Electrical conductivity of the samples was discussed based on the results obtained by AC impedance spectroscopy at temperatures in the range of 300–700 °C. The co-doping and sintering regime were found to significantly influence the conductivity of the electrolytes. The electrical conductivity of the co-doped samples depends on Dy³⁺ content and the maximum conductivity obtained by 0.15 mol% Dy and 0.05 mol% Gd. The conductivity of Gd_0.2???x Dy _x Ce_0.8O_1.9 (x?=?0.15) was 0.03 S/cm at 700 °C. A thorough discussion was made, based on the present experimental data.     

Cu+ emission in Li2BPO5 material for thermoluminescence dosimetry

In this study, Li₂BPO₅ doped with Cu and that co-doped with Mg are synthesized by the wet chemical technique and exposed to γ rays of ⁶⁰Co to determine their thermoluminescence (TL) properties. The X-ray diffraction technique shows the crystalline nature of the prepared material. The photoluminescence (PL) emission spectra of Li₂BPO₅:Cu phosphor show the strong prominent peak at 368 nm in the violet region of the visible spectrum due to the transition of 3d⁹4s¹ ? 3d¹⁰ of monovalent copper ion. The PL emission of Li₂BPO₅:Cu is enhanced by the addition of Mg. The TL glow curves of γ-irradiated Li₂BPO₅:Cu sample show one glow peak at 143°C, indicating that only one set of traps is being activated within the particular temperature range each with its own value of activation energy (E) and frequency factor (s). The trapping parameters associated with the prominent glow peak of Li₂BPO₅:Cu are calculated using the glow curve shape (Chen's) method. The release of hole/electron from defect centers at the characteristic trap site initiates the luminescence process in these materials. A linear TL response is observed in Li₂BPO₅:Cu in a long span of exposures. The sensitivity of Li₂BPO₅:Cu sample is observed to be 7.8 times that of (TLD-100) LiF:Mg, Ti.     

Influence of Y3+, Bi3+ content on photoluminescence of YVO4:Dy3+ phosphor induced by ultraviolet excitation

YxVO4:0.01Dy3+ and Y0.99-xVO4:0.01Dy3+,xBi3+ phosphors were synthesized by chemical coprecipitation method.Their crystal structure,micromorphology and photoluminescence (PL) properties were investigated by X-ray diffraction (XRD),scan electron microscopy (SEM) and spectrofluorometer.YxVO4:0.01Dy3+ and Y0.99-xVO4:0.01Dy3+,xBi3+ phosphors have a broad excitation band from about 250 to 350 nm including a strongest peak at about 310 nm.Under its excitation,the emission spectra exhibits two sharp peaks,one of which centered at about 483 nm for 4 F9/2→6 H15/2 transition of Dy3+ and the other at about 574nm due to the 4F9/2→6H13/2 transition of Dy3+.For YxVO4:0.01Dy3+ (x=0.94,0.97,0.99,1.01,1.03)phosphor,with increasing value of x,the body color of phosphor changes from yellow to white and the strongest peak in the excitation spectra shifts a little to shorter wavelength.It is detrimental to luminous intensity when Y3+ content deviates stoichiometric ratio.For Y0.99-xVO4:0.01Dy3+,xBi3+ (x=0.01,0.05,0.1,0.15,0.2,0.25) phosphor,the samples have extraneous bismuth vanadium oxide phase except for the major tetragonal zircon structure when x≥0.20.With increasing value of x,the band edge in the excitation spectra shifts to longer wavelength,the excitation intensity and luminous intensity increase early and decrease late.When the value of x is 0.01,the intensities increase evidently.In addition,the influence of Y3+ or Bi3+ on the color temperature of emission and micromorphology of YVO4:Dy3+ is slight.     

Optical Spectroscopy of Sm3+ and Dy3+ Doped ZnO Nanocrystals

Sm³⁺ and Dy³⁺ ions doped hexagonal wurtzite ZnO nanocrystals were fabricated by a sol-gel method. The obtained ZnO nanocrystals were characterized using the X-ray diffraction, transmission electron microscopy, ultraviolet-visible reflectance spectra, and low-temperature luminescence spectroscopy. Intense and well resolved emission lines for Sm³⁺ and Dy³⁺ ions can be achieved via an energy transfer process from ZnO host to the dopants. It was found that the host sensitized emissions were more efficient than that of direct excitation for Sm³⁺ and Dy³⁺ ions. Moreover, multiple sites of Sm³⁺ and Dy³⁺ ions in ZnO nanocrystals were identified based on the low-temperature photoluminescence spectra.     

Radio- and thermoluminescence of single-doped and codoped lithium-sodium sulfate

Radioluminescence at room temperature and thermoluminescence (TL) measurements of single-doped and codoped LiNaSO₄ above room temperature are reported here. The codoped samples were studied to investigate the possibility of enhancing the TL sensitivity of LiNaSO₄:Eu. This objective was not satisfied and the codopants (Ce, Sm, Ho and Er) decrease the TL sensitivity and slightly shift the dosimetric peak to lower temperatures. Samples doped with Mg, K, Bi and Tl were used with the hope that they may alter the trapping centers stability and introduce new peaks in the temperature range 430–500 K to observe any TL discontinuity or wavelength shift in their spectra as observed in CL measurements. This objective was fulfilled with Tl and Bi, where there is a discontinuity and/or wavelength shift at about 460 K. Such intensity and/or wavelength variations are ascribed to microstructural phase changes within the LiNaSO₄ crystals that may result from twin boundaries behaving like Na₂SO₄.     

Influence of quenching on the structural and conduction characteristics of lithium sulfate

Lithium sulfate quenched from the high-temperature melt using conventional quenching as well as rapid quenching techniques has been investigated using X-ray diffraction, scanning electron microscope, differential scanning calorimetry (DSC), vibrational spectroscopy techniques, and electrical conductivity measurements. Crystal structure of the quenched samples studied using X-ray diffraction shows a less ordered β-Li₂SO₄ phase. This is accompanied by a decrease in phase transition temperature in DSC measurements along with a decrease in the molar enthalpy associated with the transition. Raman and FT-IR spectroscopy studies reveal the disorder in the quenched samples by a significant broadening of the bands associated with the fundamental vibrational modes of SO₄ ^2? ion. Temperature variation of conductivity shows an enhancement in ionic conductivity by one order of magnitude with a slight decrease in phase transition point for quenched samples over unquenched Li₂SO₄.     

E u3+,D y3+共注入A lN薄膜结构和发光特性研究

采用离子注入方法在氢化物气相外延法生长的AlN薄膜中注入了不同剂量的Dy~(3+)和Eu~(3+),制备了Dy~(3+)单掺、Dy~(3+)和Eu~(3+)共掺的AlN样品.对于Dy~(3+)单掺杂AlN样品,X射线衍射和拉曼散射实验结果表明随着Dy注入剂量的增加,样品的压应力也增加,形成了比较明显的损伤层;但当注入剂量由5×1014at/cm~2增加至1×1015at/cm~2时,压应力增加不明显,接近于饱和.对于Dy~(3+)和Eu~(3+)共掺的AlN样品,阴极荧光实验表明,AlN中Eu~(3+)和Dy~(3+)之间可能存在能量传递,能量传递途径为在声子辅助下从Dy~(3+)的4F9/2→6H15/2至Eu~(3+)的7F0→5D2的共振能量传递.此外,计算发现改变Dy~(3+)和Eu~(3+)离子的注入剂量比能实现发光色度坐标和色温的有效调控.     

Optical transitions of Eu3+ and Dy3+ ions in lead phosphate glasses

Lead phosphate glasses containing Eu(3+) and Dy(3+) have been studied. Local structure was verified using Fourier transform (FT)-IR spectroscopy. Emission bands of Eu(3+) and Dy(3+) ions in lead phosphate glasses are observed in the visible spectral range, which correspond to 5D0→7F(J) (J=0,1,2,4) and 4F(9/2)→6H(J/2) (J=15,13,11) transitions, respectively. Shorter luminescence decays from excited states of Eu(3+) and Dy(3+0 are due to the presence of PbO in phosphate glass.     

Coulomb excitation studies of 160Dy, 162Dy and 164Dy

Coulomb excitation measurements with ¹⁶O and ⁴He projectiles have been performed on ¹⁶⁰Dy, ¹⁶²Dy, and ¹⁶⁴Dy. The ground-state rotational bands up through the 8⁺ member were observed in the ¹⁶O experiments. The measured excitation probabilities yield B(E2; I → I ?2) values which are generally in agreement with the rotational predictions except for the 6⁺ → 4⁺ values. In each nucleus, probabilities for exciting the 2⁺, 4⁺, and 6⁺ members of the γ-vibrational band were measured and compared with calculated results. The B (E2; 0⁺ → 2⁺γ) values were measured in experiments involving ⁴He ions. The K^π = 2^? octupole band was observed in each nucleus in addition to 1^? bands in ¹⁶⁰Dy and ¹⁶²Dy. Excitation probabilities were analyzed in an attempt to extract B(E3) values.     

Dy3+/Nd3+掺杂对Sr4Al14O25:Eu2+陷阱能级的影响

采用高温固相法合成了Sr₄Al₁₄O₂₅: Eu²⁺,Sr₄Al₁₄O₂₅: Eu²⁺,Dy³⁺和Sr₄Al₁₄O₂₅: Eu²⁺,Nd³⁺材料,研究了Dy³⁺或Nd