ZnO一维纳米结构的形貌调控与亲疏水性研究

分别使用金属、半导体等类型的基片作沉积衬底,采用气相沉积的方法合成了多种ZnO一维纳米结构,如塔状结构、锥状结构、蘑菇状结构、环状结构等等.用扫描电镜,透射电镜等对合成产物的形貌和结构进行了研究,结果发现沉积衬底对合成产物形貌和结构有着重要的影响.同时对合成塔状纳米结构的生长机理做了系统地分析,并研究了其相应的亲疏水性能. 关键词： 纳米结构 气相沉积 形貌调控 结构表征     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

Design of a highly sensitive surface plasmon resonance sensor using aluminum-based diffraction grating

A highly-sensitive grating-based surface plasmon resonance (SPR) sensor is proposed. The angular interrogation method has been used to study the performance of the sensor, and high sensitivity is obtained if the ?1st diffraction order is used to excite surface plasmon (SP). The sensitivity as well as the width of the SPR curves and reflective amplitude is considered for designing the sensor. Compared with the conventional gold (Au)-based or silver (Ag)-based SPR sensor, it is found that the aluminum (Al)-based sensor has the best performance. The oxidation problem of an Al-based SPR sensor has been addressed by coating it with an ultrathin gold film on the surface. Numerical simulations based on rigorous coupled wave analysis (RCWA) show that the sensitivity of the optimized sensor is 245°/RIU (degree per refractive index unit).     

Fabrication of a highly sensitive sensor electrode using a nano-gapped gold particle film

Controlling a gap between electrodes arranged in nanometer size has a great potential for a highly sensitive detection. We have successfully fabricated a sensor based on a nano-gapped gold particle film consisting of gold nanoparticle–alkylchain–gold nanoparticle repeated sequences in a straightforward manner. Here we report on its application to direct DNA analysis, enabling us to read out a specific complementary DNA through electronic protocols.     

The effect of morphology and doping on photoluminescence of ZnO nanostructures

In this work, optical properties of ZnO nanostructures prepared by chemical vapor deposition under different conditions were investigated. ZnO nanostructures were characterized by electron microscopy and photoluminescence. A high intensity green emission and a narrow UV emission band are observed in photoluminescence spectra of ZnO nanostructures related to the below-band-gap and band-edge that their intensities depend on the morphology of the nanostructures. It is considered that the green emission is originated from structural defects. In addition, the influence of thermal treatment and dopants such as iron and copper, on the photoluminescence (PL) properties of the ZnO nanostructures was investigated.     

片上制备横向结构ZnO纳米线阵列紫外探测器件

将纳米技术与传统的微电子工艺相结合, 片上制备了横向结构氧化锌(ZnO)纳米线阵列紫外探测器件, 纳米线由水热法直接自组织横向生长于叉指电极之间, 再除去斜向的多余纳米线, 其余工艺步骤与传统工艺相同. 分别尝试了铬(Cr)和金(Au)两种金属电极的器件结构: 由于Cr电极对其上纵向生长的纳米线有抑制作用, 导致横向生长纳米线长度可到达对侧电极, 光电响应方式为受表面氧离子吸附控制的光电导效应, 光电流大但增益低, 响应速度慢, 经二次电极加固, 纳米线根部与电极金属直接形成肖特基接触, 光电响应方式变为光伏效应, 增益和速度得到了极大改善; 由于Au电极对其上纵向生长的纳米线有催化作用, 导致溶质资源的竞争, 相同时间内横向生长的纳米线不能到达对侧, 而是交叉桥接, 但却形成了紫外光诱导的纳米线间势垒结高度调控机理, 得到的器件特性为最优, 在波长为365 nm的20 mW/cm²紫外光照下, 1 V电压时暗电流为10^-9 A, 光增益可达8×10⁵, 响应时间和恢复时间分别为1.1 s和1.3 s.     

Influence of the morphology of ZnO nanostructures on luminescent and photovoltaic properties

Arrays of ZnO nanorods and nanoplates are synthesized by the hydrothermal and electrochemical methods, respectively. The photoluminescence spectra indicate that the nanoplates have a more defective structure than the nanorods. The obtained ZnO nanostructures are used as the basis to construct dye-sensitized solar cells. The influence of morphology and defectiveness of ZnO nanostructures on the luminescent and photovoltaic properties of the cells is studied.     

Synthesis of ZnO nanostructures with controlled morphology and size in ionic liquids

Nanostructured ZnO has been synthesized by a hydrothermal route, using different ionic liquids (ILs) as the morphology templates. The morphology of ZnO changes from rod-like to star-like and flower-like in different ILs. A 3D nano/micro structure ZnO with unique flower-like morphology has been synthesized via the assembly of dicationic IL and [Zn(OH)₄]²⁻. The flower-like pattern was obtained in the presence of IL 1. The flower-like ZnO structure has a hexagonal prism, with a hexagonal pyramid on the tip, and diameter of ~444 nm. While the ZnO prepared in IL 2, shows uniform rod-like shape with a diameter of 91 nm, star-like morphology consisting of nanorods with diameter of ~109 nm was formed in IL 3. The XRD, SEM, and PL spectra have been employed for characterization of the synthesized ZnO nano structures.     

Evaluation of acoustoelectric UV sensor according to ZnO thin film properties

This paper presents an improvement of the acoustoelectric effect by sensitivity and response of ultraviolet (UV) sensors by changing the argon/oxygen ratio. The acoustoelectric sensor is a delay-line type with a center frequency of 240.2625 MHz and fabricated on a piezoelectric substrate. Aluminum thin films were deposited as interdigitated transducers and patterned, and the ZnO thin film was deposited as a UV sensing layer by controlling the ratio of argon and oxygen with an RF magnetron sputtering. By increasing the oxygen partial pressure during ZnO deposition, the photoconductivity increased by 6.5 times, thereby increasing the frequency change related to the sensitivity of the sensor. The sensitivity to UV light was 110.4 Hz cm²/μW under an argon/oxygen ratio of 6:4, which is an increase of 5.1 times from 21.76 Hz cm²/μW obtained under a ratio of 10:2. In addition, the response and recovery times were improved by 2.85 times and 3.02 times, respectively.     

Effect of source temperature on the morphology and photoluminescence properties of ZnO nanostructures

ZnO nanostructures have been synthesized by heating a mixture of ZnO/graphite powders using the thermal evaporation and vapor transport on Si(1 0 0) substrates without any catalyst and at atmospheric argon pressure. The influence of the source temperature on the morphology and luminescence properties of ZnO nanostructures has been investigated. ZnO nanowires, nanoflowres and nanotetrapods have been formed upon the Si(1 0 0) substrates at different source temperatures ranging from 1100 to 1200 °C. Room temperature photoluminescence (PL) spectra showed increase green emission intensity as the source temperature was decreased and ZnO nanowires had the strongest intensity of UV emission compared with other nanostructures. In addition, the growth mechanism of the ZnO nanostructures is discussed based on the reaction conditions.     

Optical and room temperature sensing properties of highly oxygen deficient flower-like ZnO nanostructures

Oxygen deficient zinc oxide (ZnO) thin films were deposited electrochemically on glass substrates which are pre-sputtered with pure zinc (Zn) metal. Well-arranged flower-like nanostructures are observed from the SEM micrographs. The purity and crystallinity of the deposited films were confirmed from X-ray diffraction studies supported by Raman studies. The broad and intense defect induced green emission confirms the high oxygen deficiency in the nanostructures. The flower-like structures as well as the oxygen defects present in the system are indeed very suitable for gas and chemical sensing applications. These films were used for room temperature sensing of three different chemicals viz. acetone, ethanol and ammonia. The sensor was found to be insensitive to the change in different concentrations of acetone while it was found to be sensitive to different concentrations of ethanol and ammonia. The sensor is most suitable for sensing ammonia at room temperature.     

Fabrication of ZnO nanostructures of various dimensions using patterned substrates

ZnO nanostructures were grown on silicon, porous silicon, ZnO/Si and AlN/Si substrates by low-temperature aqueous synthesis method. The shape of nanostructures greatly depends on the underlying surface. Scattered ZnO nanorods were observed on silicon substrate, whereas aligned ZnO nanowires were obtained by introducing sputtered ZnO film as a seed layer. Furthermore, both the combination of nanorods and the bunch of nanowires were found on porous silicon substrates, whereas platelet-like morphology was observed on AlN/Si substrates. XRD patterns suggest the crystalline nature of aqueous-grown ZnO nanostructures and high-resolution transmission electron microscopy images confirm the single-crystalline growth of the ZnO nanorods along [0 0 1] direction. Room-temperature photoluminescence characterization clearly shows a band-edge luminescence along with a visible luminescence in the yellow spectral range.     

Spectral-domain optical coherence reflectometric sensor for highly sensitive molecular detection

We describe what we believe to be a novel use of spectral-domain optical coherence reflectometry (SD-OCR) for highly sensitive molecular detection in real time. The SD-OCR sensor allows identification of a sensor surface of interest in an OCR depth scan and monitoring the phase alteration due to molecular interaction at that surface with subnanometer optical thickness sensitivity. We present subfemtomole detection sensitivity for etching of SiO(2) molecules and demonstrate its application as a biosensor by measuring biotin-streptavidin binding in a microfluidic device.     

Biomimetic-inspired highly sensitive flexible capacitive pressure sensor with high-aspect-ratio microstructures

The high sensitivity flexible capacitive pressure sensor (FCPS) manufactured in a fast and efficient way has friendly man-machine interaction function. In this paper, a high-sensitivity FCPS is developed by using a two-step template method to reproduce biomimetic microtower polydimethylsiloxane (PDMS) from the lotus leaf surface. The capacitive sensor is composed of a PDMS dielectric layer and the Cu nanowire electrodes sandwiching in the middle, with a high sensitivity of ~1.207 kPa⁻¹, a low detection limit of less than 0.02 kPa and a fast response time of 61.6 ms. Particularly, the sensing performance can be kept basically unchanged when bent at a 5 mm radius. Moreover, the FCPS can withstand 4000 repeated tests and maintain stable performance, and the sensitivity is almost the same in the process of loading and unloading, suggesting the high robustness. These results demonstrates the FCPSs have potential applications in electronic wearables, human health monitoring and uneven surface applications.     

Effect of substrates and anions of zinc salts on the morphology of ZnO nanostructures

The ZnO nanostructures were hydrothermally synthesized on glass and Al substrates, respectively, using zinc chloride, zinc nitrate, and zinc acetate as precursor. The as-prepared products were characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). Different ZnO nanostructures were obtained, such as nanorods, nanosheets, flower-like nanostructures and so on. The effects of the substrates and anions of zinc salts on the morphologies of the resulting products have been investigated.     

Effect of zinc sources on the morphology of ZnO nanostructures and their photoluminescence properties

The morphology and photoluminescence properties of ZnO nanostructures synthesized from deferent zinc sources by a vapor deposition process were investigated. The zinc sources involved pure zinc, ZnO, and ZnCO₃ powders, respectively. It was found that the zinc sources have a strong effect on the morphology of the ZnO nanostructures. For the pure zinc and ZnO sources, uniform ZnO nanowires and tetrapods are obtained, respectively. However, in the case of the ZnCO₃ source, the products are nanowire–tetrapod combined nanostructures, in which ZnO nanowires grow from the ends of tetrapod arms. The morphology differences of these products may be mainly concerned with the yield and constituents of the corresponding zinc vapor. Photoluminescence measurements show that the nanowires have a relatively stronger near-band UV emission than the other products. The strongest green-light emission from the tetrapods implies that more defects exist in the tetrapods. An evident peak at 430 nm is found in the spectrum of the nanowire–tetrapod combined nanostructures, which may be caused by oxygen-depletion interface traps. PACS 73.61.Tm; 81.10.Bk; 78.55.Et     

Enhancing UV photosensitivity of ZnO UV nanosensor using electrical stimulation at megahertz frequency

We report a novel technique to enhance the ultraviolent (UV) photosensitivity of ZnO nanosensor with ZnO nanowires bridged on micromachined metallic electrodes. The experimental results reveal that the photoconductivity and the time response of the ZnO nanowire sensor with either Schottky or Ohmic contacts are significantly improved by electrifying the nanowire sensors using an alternating current at the frequency of megahertz. An integrated UV sensor incorporating ZnO nanowires with a constant current mode driving circuit is developed, which demonstrates promising sensitivity and time response to UV illumination with a low power consumption.     

Morphology engineering of ZnO nanostructures

Nanosized ZnO structures were grown by atmospheric pressure metalorganic chemical vapor deposition (APMOCVD) in the temperature range 200–500 °C at variable precursor pressure. Temperature induced evolution of the ZnO microstructure was observed, resulting in regular transformation of the material from conventional polycrystalline layers to hierarchically arranged sheaves of ZnO nanowires. The structures obtained were uniformly planarly located over the substrate and possessed as low nanowires diameter as 30–45 nm at the tips. The observed growth evolution is explained in terms of ZnO crystal planes free energy difference and growth kinetics. For comparison, the convenient growth at constant precursor pressure on Si and SiC substrates has been performed, resulting in island-type grown ZnO nanostructures. The demonstrated nanosized ZnO structures may have unique possible areas of application, which are listed here.     

Effects of electrolyte on ZnO nanostructures synthesized by galvanostatic electrochemical deposition and their UV sensing properties

In this study, ZnO nanorods (NRs) and nanocombs (NCs) are synthesized by simple galvanostatic electrochemical deposition technique, without prepared any ZnO seed-layer or catalyst. The effect of the different morphologies on the UV sensing characteristics has been studied under ambient conditions. The photoluminescence (PL) spectra and time-dependent photoresponse of the ZnO nanostructures exhibited good optical properties. At room temperature, NCs showed superior response with 9% change of its resistance, few seconds response time and fully recovery. Inversely, in high temperature ZnO NRs indicated better response than NCs with the variation of 25% of its resistance. The dependence photoresponse on temperature demonstrated clearly how surface-defects affect on UV response of ZnO nanostructures. Our approach is to provide a simple and cost-effective way to fabricate UV detectors.