Computational study of ground-state chiral induction in small peptides: comparison of the relative stability of selected amino acid dimers and oligomers in homochiral and heterochiral combinations

The relative stabilities of homochiral and heterochiral forms of selected dipeptides, AA, AS, AC, AV, AF, AD, AK, tripeptides, AAA, AVA, and an acetylpentapeptide, AcGLSFA, have been calculated using thermodynamic integration protocols and the GROMOS 53A6 force field. Integration pathways have been designed that produce minimal disturbance to the system, including the use of soft atoms, low-energy intermediates, and chiral inversion of the smaller amino acid in the peptide. Comparison of the results obtained by thermodynamic integration between the diastereomeric forms (in explicit water, at 300 K) and from exhaustive global minimum-energy searches for the individual dipeptides (implicit water, epsilon = 78, 0 K) suggests that entropic contributions to the relative stability of the chiral forms are important. This conclusion is supported by the results of explicit calculation of the effect of temperature on the relative stability of alanylvalylalanine diastereomers. The Gibbs free energy calculations predict that at ambient temperature and pressure homochiral dipeptides with small side chains or polar groups in the vicinity of the peptide backbone, AA, AS, and AD, are more stable than their heterochiral counterparts by fractions of a kJ/mol. For bigger side chains, AC, AV, AF, and AK, the heterochiral diastereomers appear to be more stable. Predicted relative stabilities are in line with observations reported in the literature for AE and YY. Excellent agreement is found for the calculated and experimentally determined relative stabilities of the diastereomers of the dipeptide AA and of all-L AcGLSFA and its diastereomer containing D-serine in the central position. Addition of counterions to the solvent box has no significant effects on charged and neutral forms. From the present findings it would appear unlikely that the intrinsic stability difference between homo- and heterochiral dipeptides has been a driving force in a primordial selection process leading to the incorporation of amino acids with a single enantiomeric configuration in natural proteins.     

Conformational stability of the propylene oxide-water adduct: direct spectroscopic detection of O-H...O hydrogen bonded conformers

The 1:1 molecular adduct of propylene oxide and water (PO-H(2)O) was studied using Fourier transform microwave spectroscopy and high level ab initio methods. Two distinct structural conformers with the water molecule acting as a proton donor were detected experimentally: one with the water on the same side as the methyl group with respect to the ether ring, i.e., syn-PO-H(2)O, the other with the water molecule binding to the O-atom from the opposite side of the methyl group, i.e., anti-PO-H(2)O. The nonbonded hydrogen is entgegen to the ether ring in both conformers. Rotational spectra of four isotopic species, namely PO-H(2)O, PO-DOH, PO-HOD, and PO-D(2)O, were recorded for the two conformers. The hydrogen bond parameters: r(O(epoxy)...H), angle(ring-O(epoxy)...H), and angle(O(epoxy)...H-O) are 1.908 A, 112 degrees, and 177 degrees for syn-PO-H(2)O, and 1.885 A, 104.3 degrees, and 161.7 degrees for anti-PO-H(2)O, respectively. The experimental results suggest that the hydrogen bond in syn-PO-H(2)O is stronger and the monomer subunits are more rigidly locked in their positions than in the ethylene oxide-water adduct. The stabilizing effect of the methyl group to the intermolecular hydrogen bond is discussed in terms of the experimentally estimated binding energies, the structural parameters, and the ab initio calculations.     

Coexistence of homochiral and heterochiral adenine domains at the liquid/solid interface

In this work, the self-assembly of the DNA base molecule adenine (A) is imaged with high-resolution scanning tunneling microscopy (STM) at the liquid (1-octanol)/solid (HOPG) interface at room temperature. Rather surprisingly, the STM results reveal, for the first time, the spontaneous formation of two coexisting distinct (homo- and heterochiral) domains of adenine, which are formed at the liquid/solid interface without changing any experimental conditions. Ab initio density functional theory (DFT) calculations support our STM findings and suggest the existence of various A networks of nearly similar stability that all are constructed from the most stable A dimer.     

Partial oxidation of propylene to propylene oxide over a neutral gold trimer in the gas phase: a density functional theory study

We report a B3LYP study of a novel mechanism for propylene epoxidation using H(2) and O(2) on a neutral Au(3) cluster, including full thermodynamics and pre-exponential factors. A side-on O(2) adsorption on Au(3) is followed by dissociative addition of H(2) across one of the Au-O bonds (DeltaE(act) = 2.2 kcal/mol), forming a hydroperoxy intermediate (OOH) and a lone H atom situated on the Au(3) cluster. The more electrophilic O atom (proximal to the Au) of the Au-OOH group attacks the C=C of an approaching propylene to form propylene oxide (PO) with an activation barrier of 19.6 kcal/mol. We predict the PO desorption energy from the Au(3) cluster with residual OH and H to be 11.5 kcal/mol. The catalytic cycle can be closed in two different ways. In the first subpathway, OH and H, hosted by the same terminal Au atom, combine to form water (DeltaE(act) = 26.5 kcal/mol). We attribute rather a high activation barrier of this step to the breaking of the partial bond between the H atom and the central Au atom in the transition state. Upon water desorption (DeltaE(des) = 9.9 kcal/mol), the Au(3) is regenerated (closure). In the second subpathway, H(2) is added across the Au-OH bond to form water and another Au-H bond (DeltaE(act) = 22.6 kcal/mol). Water spontaneously desorbs to form an obtuse angle Au(3) dihydride, with one H atom on the terminal Au atom and the other bridging the same terminal Au atom and the central Au atom. A slightly activated rearrangement to a symmetric triangular Au(3) intermediate with two equivalent Au-H bonds, addition of O(2) into the Au-H bond, and rotation reforms the hydroperoxy intermediate in the main cycle. On the basis of the DeltaG(act), which contains contribution from both pre-exponetial factor and activation energy, we identify the propylene epoxidation step as the actual rate-determining step (RDS) in both the pathways. The activation barrier of the RDS (epoxidation step: DeltaE(act) = 19.6 kcal/mol) is in the same range as that in the published computationally investigated olefin epoxidation mechanisms involving Ti sites (without Au involved) indicating that isolated Au clusters and possibly Au clusters on non-Ti supports can be active for gas-phase partial oxidation, even though cooperative mechanisms involving Au clusters/Ti-based-supports may be favored.     

Chiral recognition between 1-(4-fluorophenyl)ethanol and 2-butanol: higher binding energy of homochiral complexes in the gas phase

Diastereomeric adducts between (S)-1-(4-fluorophenyl)-ethanol and R and S 2-butanol, formed by supersonic expansion, have been investigated by means of a combination of mass selected resonant two-photon ionization-spectroscopy and infrared depletion spectroscopy. Chiral recognition is evidenced by the specific spectroscopic signatures of the S(1)← S(0) electronic transition as well as different frequencies and intensities of the OH stretch vibrational mode in the ground state. D-DFT calculations have been performed to assist in the analysis of the spectra and the determination of the structures. The homochiral and heterochiral complexes show slight structural differences, in particular in the interaction of the alkyl groups of 2-butanol with the aromatic ring. The experimental results show that the homochiral [FE(S)·B(S)] complex is more stable than the heterochiral [FE(S)·B(R)] diastereomer in both the ground and excited states. The binding energy difference has been evaluated to be greater than 0.60 kcal mol(-1).     

Phenylborylene: direct spectroscopic characterization in inert gas matrices

The photolysis of bisazidophenylborane isolated in cryogenic matrices results in phenylborylene, a subvalent boron(I) species with a singlet ground state. Broad band irradiation of phenylborylene causes formation of benzoborirene by insertion into an ortho-CH bond.     

Silanetriols in the gas phase: single molecules vs. hydrogen-bonded dimers

The first gas phase structure of a silanetriol, tert-butylsilane-triol [(t)BuSi(OH)(3)], determined by gas electron diffraction (GED), is reported. Quantum chemical calculations have been performed to elucidate potential intermolecular interactions between silanetriol molecules in the gas phase. The results are set into contrast to solid state structures of (t)BuSi(OH)(3) and related compounds.     

Reaction of vinyl radicals with propylene in the gas phase

The reaction of vinyl radicals with propylene and propyl radicals was investigated in the gas phase. The radicals were produced by mercury sensitized decomposition of molecular hydrogen followed by addition of hydrogen atoms to propylene and acetylene. Vinyl radical adds to propylene effectively while hydrogen atom abstraction does not occur.

---

. , , . , , .

     

Controlled generation of heterochiral or homochiral coordination polymer: helical conformational polymorphs and argentophilicity-induced spontaneous resolution

In the pair of helical conformational polymorphs of the coordination polymer {[AgL](CF3SO3)}infinity(L=2-pyridinyl-3-pyridinylmethanone), the 2(1) helices of opposite chirality in one supramolecular isomer are stacked alternately to form a racemate, while the 4(1) helices in the other are assembled homochirally by inter-chain argentophilic interaction to generate a conglomerate.     

Distinction between homochiral and heterochiral dimers of 1-aza[n]helicenes (n = 1–7) with alkaline cations

A theoretical study of the chiral distinction between the homochiral and heterochiral dimers of the 1-aza[n]helicenes, with n = 1–7, glued with lithium, sodium, and potassium cations has been carried out by means of DFT calculations up to M05-2x/6-311+G(d) computational level. The electronic characteristic of the isolated helicenes has been explored. The chiral distinction is dependent on the size of the helicene and the cation used with the largest values obtained for the 1-aza[6]helicene bound to lithium cation.     

Infrared spectra of homogeneous and heterogeneous proton-bound dimers in the gas phase

Infrared multiphoton dissociation spectra of three homogeneous and two heterogeneous proton-bound dimers were recorded in the gas phase. Comparison of the experimental infrared spectra recorded in the fingerprint region of the proton-bound dimers with spectra predicted by electronic structure calculations shows that all modes which are observed contain motion of the proton oscillating between the two monomers. The O-H-O asymmetric stretch for the homogeneous dimers is shown to occur at around 800 cm-1. As expected, the O-H-O asymmetric stretching modes for the heterogeneous proton-bound dimers are observed to shift to significantly higher energy with respect to those for the homogeneous proton-bound dimers due to the asymmetry of the O-H-O moeity. This shift is shown to be predictable from the difference in proton affinities between the two monomers. Density functional predictions of the infrared spectra based on the harmonic oscillator model are demonstrated to predict the observed spectra of the homogeneous proton-bound dimers with reasonable accuracy. Calculations of the structure and infrared spectrum of protonated diglyme at the B3LYP/6-31+G** level and basis also agree well with an infrared spectrum recorded previously. For both heterogeneous proton-bound dimers, however, the predicted spectra are blue-shifted with respect to experiment.     

Nonclassical complex of dichlorosilylene with CO: direct spectroscopic detection

Russian Chemical Bulletin - A complex between SiCl2 and CO of the 1:1 composition with coordination of the silylene to the C atom of carbon monoxide is detected in Ar matrices using FTIR...     

Use of semiconductor oxide films for the detection of volatile organic compounds in the gas phase

A new type of flow-sensitive detectors of volatile organic compounds based on tin dioxide films modified by transition metal oxides has been proposed. The change on the film electric conductivity upon its contact with a flow of carrier gas containing a detectable compound has been used as an analytical signal. Dependences of analytical signals for some organic compounds on the temperature and film composition have been studied. Gas-chromatographic separation of model mixtures using a thermal catalytic detector has been performed. The possibility of the identification of organic compounds by the relationship between the analytical signals of two films of different compositions has been demonstrated.     

Valence anions of N-acetylproline in the gas phase: computational and anion photoelectron spectroscopic studies

We report the photoelectron spectrum of anionic N-acetylproline, (N-AcPro)(-), measured with 3.49 eV photons. This spectrum, which consists of a band centered at an electron binding energy of 1.4 eV and a higher energy spectral tail, confirms that N-acetylproline forms a valence anion in the gas phase. The neutrals and anions of N-AcPro were also studied computationally at the B3LYP∕6-31++G(d,p) level. Based on the calculations, we conclude that the photoelectron spectrum is due to anions which originated from proton transfer induced by electron attachment to the π* orbital localized at the acetyl group of N-AcPro. We also characterized the energetics of reaction paths leading to pyrrolidine ring opening in the anionic N-AcPro. These data suggest that electron induced decomposition of peptides/proteins comprising proline strongly depends on the presence of proton donors in the close vicinity to the proline residue.     

Chiral recognition in the gas phase: Mass spectrometric studies of diastereomeric cobalt complexes

Results of mass analyzed ion kinetic energy (MIKE) spectra and kinetic energy release (KER) measurements of diastereomeric octahedral cobalt complexes indicate that these diastereomers can be distinguished in the gas phase. Four alkyl tartrate esters were complexed to cobalt trisacetylacetonate (Co(acac)₃) in the presence of a chiral auxiliary, RR- and SS-threohydrobenzoin. Different KER values of the product ion generated from [Co(acac)₂/D- or L-diisopropyl tartrate]⁺ reflect differences in the precursor ion structure. The dissociation pathway resulting in this product ion is believed to arise via a hydride transfer from the acetylacetonate ligand to the metal center with subsequent loss of neutral organic species. It has been established that two conditions are necessary for observation of chiral recognition in this system; (1) the cobalt complex must be octahedral and (2) a chemical kinetic resolving agent must be present during formation of the complex.     

Rapid evaluation of the binding energies in hydrogen-bonded amide-thymine and amide-uracil dimers in gas phase

The binding energies and the equilibrium hydrogen bond distances as well as the potential energy curves of 48 hydrogen‐bonded amide–thymine and amide–uracil dimers are evaluated from the analytic potential energy function established in our lab recently. The calculation results show that the potential energy curves obtained from the analytic potential energy function are in good agreement with those obtained from MP2/6‐311+G** calculations by including the BSSE correction. For all the 48 dimers, the analytic potential energy function yields the binding energies of the MP2/6‐311+G** with BSSE correction within the error limits of 0.50 kcal/mol for 46 dimers, only two differences are larger than 0.50 kcal/mol and the largest one is only 0.60 kcal/mol. The analytic potential energy function produces the equilibrium hydrogen bond distances of the MP2/6‐311+G** with BSSE correction within the error limits of 0.050 Å for all the 48 dimers. The analytic potential energy function is further applied to four more complicated hydrogen‐bonded amide–base systems involving amino acid side chain and β‐sheet. The values of the binding energies and equilibrium hydrogen bond distances obtained from the analytic potential energy function are also in good agreement with those obtained from MP2 calculations with the BSSE correction. These results demonstrate that the analytic potential energy function can be used to evaluate the binding energies in hydrogen‐bonded amide–base dimers quickly and accurately. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011     

Polysiloxane-poly(propylene oxide) hybrid discs as solid phase in anti-HCV detection using a recombinant core protein

In this work, siloxane-poly(propylene oxide) discs (PPO disc) prepared using the sol-gel process were used as solid phase in enzyme-linked immunosorbent assays (ELISA) for the detection of anti-hepatitis C virus (HCV) antibodies. The HCV RNA from serum (genotype 1b) was submitted to the RT-PCR technique and subsequent amplification of the HCV core 408 pb. This fragment was cloned into expression vector pET42a and expressed in Escherichia coli as recombinant protein with glutathione S-transferase (GST). Cell cultures were grown and induced having a final concentration of 0.4 x 10(-3) mol L(-1) of IPTG. After induction, the cells were harvested and the soluble fraction was analyzed using polyacrilamide gel 15% showing a band with an approximate molecular weight of 44 kDa, the expected size for this GST-fused recombinant protein. The recombinant protein was purified and confirmed by immunological detection using HCV-positive serum and showed no cross-reactivity with positive samples for other infectious diseases. An ELISA was established using 1.25 ng of recombinant protein per PPO disc, a dilution of 1:10,000 and 1:40 for a peroxidase conjugate and serum, respectively, and solutions of hydrogen peroxide and 3,3',5,5'-tetra-methylbenzidine in a ratio of 1:1. The proposed methodology was compared with the ELISA conventional polystyrene-plate procedure and the performance of the PPO discs as a matrix for immunodetection gave an easy synthesis, good performance and reproducibility for commercial application.     

Isotope effects in dissociation reactions of proton bound amine dimers in the gas phase

Kinetic and thermodynamic isotope effects on the unimolecular dissociation of proton bound dimers were studied in the gas phase using mass spectrometry techniques. In addition proton transfer reactions were investigated using equilibrium techniques in conjunction with a theoretical study. Normal isotope effects were observed for all of the amine systems studied. The effect of label position, extent of labeling, size and structure of the proton bound dimers have been discussed with respect to (i) the kinetic and thermodynamic isotope effect on the dissociation reaction, (ii) the kinetic energy release on the dissociation reaction, (iii) the thermodynamic isotope effect on the proton exchange reaction between the labeled and unlabeled amines, and (iv) the effective temperatures and the excess energies of the metastable proton bound dimers. Other compound classes (CH₃OH, (CH₃)₂O, CH₃CN and (CH₃)₂CO) were studied and discussed in the same way, though not as thoroughly. All the systems show normal isotope effects, except for the proton bound dimer of CH₃CN and CD₃CN, which showed an inverse isotope effect.     

A direct comparison of protein structure in the gas and solution phase: the Trp-cage

Molecular dynamics simulations of zwitterions of the Trp-cage protein in the gas phase show that the most stable ion in vacuo has preserved the charge locations acquired in solution. A direct comparison of the gas and solution-phase structures reveals that, despite the similarity in charge location, there is significant difference in the structures, with a substantial increase in hydrogen bonds and exposure of hydrophobic parts in the gas phase. The structure of the salt bridge in the gas phase is also much more stable than in the (experimental) solution structure.