Zinc-zinc bonded zincocene structures. Synthesis and characterization of Zn2(eta5-C5Me5)2 and Zn2(eta5-C5Me4Et)2

While, in general, decamethylzincocene, Zn(C5Me5)2, and other zincocenes, Zn(C5Me4R)2 (R = H, But, SiMe3), react with dialkyl and diaryl derivatives, ZnR'2, to give the half-sandwich compounds (eta5-C5Me4R)ZnR', under certain conditions the reactions of Zn(C5Me5)2 with ZnEt2 or ZnPh2 produce unexpectedly the dizincocene Zn2(eta5-C5Me5)2 (1) in low yields, most likely as a result of the coupling of two (eta5-C5Me5)Zn* radicals. An improved, large scale (ca. 2 g) synthesis of 1 has been achieved by reduction of equimolar mixtures of Zn(C5Me5)2 and ZnCl2 with KH in tetrahydrofuran. The analogous reduction of Zn(C5Me4R)2 (R = H, SiMe3, But) yields only decomposition products, but the isotopically labeled dimetallocene 68Zn2(eta5-C5Me5)2 and the related compound Zn2(eta5-C5Me4Et)2 (2) have been obtained by this procedure. Compound 2 has lower thermal stability than 1, but it has been unequivocally characterized by low-temperature X-ray diffraction studies. As for 1 a combination of structural characterization techniques has provided unambiguous evidence for its formulation as the Zn-Zn bonded dimer Zn2(eta5-C5Me4Et)2, with a short Zn-Zn bond of 2.295(3) A indicative of a strong Zn-Zn bonding interaction. The electronic structure and the bonding properties of 1 and those of related dizincocenes Zn2(eta5-Cp')2 have been studied by DFT methods (B3LYP level), with computed bond distances and angles for dizincocene 1 very similar to the experimental values. The Zn-Zn bond is strong (ca. 62 kcal.mol-1 for 1) and resides in the HOMO-4, that has a contribution of Zn orbitals close to 60%, consisting mostly of the Zn 4s orbitals (more than 96%).     

Synthesis and structural characterization of Be(eta 5-C5Me5)(eta 1-C5Me4H). Evidence for ring-inversion leading to Be(eta 5-C5Me4H)(eta 1-C5Me5)

The mixed-ring beryllocene Be(C5Me5)(C5Me4H), that contains eta 5-C5Me5 and eta 1-C5Me4H rings, the latter bonded to the metal through the CH carbon atom (X-ray crystal structure) reacts at room temperature with CNXyl (Xyl = C6H3-2,6-Me2) to give an iminoacyl product, Be(eta 5-C5Me4H)[C(NXyl)C5Me5] derived from the inverted beryllocene structure Be (eta 5-C5Me4H)(eta 1-C5Me5).     

Electron paramagnetic resonance and spectroscopic characteristics of electrogenerated mixed-valent systems [(eta 5-C5Me5)M(mu-L)M(eta 5-C5Me5)]+ (M = Rh, Ir; L = 2,5-diiminopyrazines) in relation to the radicals [(eta 5-C5Me5)ClM(mu-L)MCl(eta 5-C5Me5)]+ and [(eta 5-C5Me5)M(mu-L)MCl(eta 5-C5Me5)]2+

Electrochemical reduction of the dinuclear [(eta 5-C5Me5)ClM(mu-L)MCl(eta 5-C5Me5)]2+ ions (M = Rh, Ir; L = 2,5-bis(1-phenyliminoethyl)pyrazine (bpip) and 2,5-bis[1-(2,6-dimethylphenyl)iminoethyl]pyrazine (bxip)) proceeds via the paramagnetic intermediates [(eta 5-C5Me5)ClM(mu-L)MCl(eta 5-C5Me5)]+ (L = bpip) or [(eta 5-C5Me5)M(mu-L)MCl(eta 5-C5Me5)]2+ (L = bxip) and [(eta 5-C5Me5)M(mu-L)M(eta 5-C5Me5)]+. Whereas the first is clearly a radical species with a small g anisotropy, the chloride-free cations are distinguished by structured intervalence charge transfer (IVCT) bands in the near-infrared region and by rhombic electron paramagnetic resonance features between g = 1.9 and g = 2.3, which suggests considerable metal participation at the singly occupied MO. Alternatives for the d configuration assignment and for the role of the bisbidentate-conjugated bridging ligands will be discussed. The main difference between bpip and bxip systems is the destabilization of the chloride-containing forms through the bxip ligand for reasons of steric interference.     

Synthesis and dynamic NMR studies of Pt(eta(5)-C(5)Me(5))(CO){C(O)NR(2)} complexes

The formation of Pt(eta(5)-C(5)Me(5))(CO){C(O)NR(2)} (R=Me, Et) complexes was established by spectroscopic analysis. The infrared spectra of these complexes showed a sharp absorption due to the presence of coordinated carbonyl group in the region 2017-2013cm(-1). The N,N-dialkylcarbamoyl ligands showed a characteristic CO stretching absorption in the range 1609-1616cm(-1). The proton NMR spectra of these complexes revealed the expected singlet arising from five equivalent methyl groups on the cyclopentadienyl ring with satellites due to coupling to (195)Pt. The N-methyl and N-ethyl protons exhibited very broad resonances due to restricted rotation about the N-C bond at room temperature. On cooling to -30 degrees C, the N,N-dimethyl protons for complex Pt(eta(5)-C(5)Me(5))(CO){C(O)NMe(2)} showed two sharp singlets at delta 2.86 and 3.09ppm as expected for the static structure. For the N,N-diethyl derivative, Pt(eta(5)-C(5)Me(5))(CO){C(O)NEt(2)}, the methyl protons exhibited only a single triplet at delta 1.06ppm at -10 degrees C due to coupling with the methylene protons. This single resonance arises through accidental overlap as the methylene protons of the ethyl groups are inequivalent at this temperature and each exhibited a quartet at delta 3.33 and 3.70ppm due to coupling with the methyl protons. The singlet resonances for the methyl and ring carbons of the eta(5)-C(5)Me(5) group found in (13)C{(1)H} NMR spectra are illustrative of the chemical equivalence of all the carbon atoms caused by free rotation of the ring in these complexes. The signals attributable to the carbonyl and carbamoyl carbon atom resonances are found downfield as two singlets each with a large coupling constant to platinum. The platinum coupling constants of the downfield resonances could not be identified for Pt(eta(5)-C(5)Me(5))(CO){C(O)NMe(2)} due to presence of impurities.     

Construction of [(eta5-C5Me5)WS3Cu3]-based supramolecular compounds from preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, Br)

Approaches to the assembly of (eta5-C5Me5)WS3Cu3-based supramolecular compounds from two preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, 1a; X = Br, 1b) have been investigated. Treatment of 1a with LiBr/1,4-pyrazine (1,4-pyz), pyridine (py), LiCl/py, or 4,4'-bipyridine (4,4'-bipy) and treatment of 1b with 4,4'-bipy gave rise to a new set of W/Cu/S cluster-based compounds, [Li[((eta5-C5Me5)WS3Cu3(mu3-Br))2(mu-CN)3].C6H6]infinity (2), [(eta5-C5Me5)WS3Cu3(mu-CN)2(py)]infinity (3), [[PPh4][(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)].py]infinity (4), [PPh4]2[(eta5-C5Me5)WS3Cu3(CN)2]2(mu-CN)2.(4,4'-bipy) (5), and [[(eta5-C5Me5)WS3Cu3Br(mu-Br)(4,4'-bipy)].Et2O]infinity (6). The structures of 2-6 have been characterized by elemental analysis, IR spectra, and single-crystal X-ray crystallography. Compound 2 displays a 1D ladder-shaped chain structure built of square-like [[(eta5-C5Me5)WS3Cu3(mu3-Br)(mu-CN)]4](mu-CN)2(2-) anions via two pairs of Cu-mu-CN-Cu bridges. Compound 3 consists of a single 3D diamond-like network in which each (eta5-C5Me5)WS3Cu3 unit, serving as a tetrahedral node, interconnects with four other nearby units through Cu-mu-CN-Cu bridges. Compound 4 contains a 1D zigzag chain array made of cubane-like [(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)]- anions linked by a couple of Cu-mu-CN-Cu bridges. Compound 5 contains a dimeric structure in which the two incomplete cubane-like [(eta5-C5Me5)WS3(CuCN)2(mu-CN)]- anions are strongly held together via a pair of Cu-mu-CN-Cu bridges. Compound 6 contains a 2D brick-wall layer structure in which dimers of [(eta5-C5Me5)WS3Cu3Br(4,4'-bipy)]2 are interconnected via four Cu-mu-Br-Cu bridges. The successful construction of (eta5-C5Me5)WS3Cu3-based supramolecular compounds 2-6 from the geometry-fixed clusters 1a and 1b may expand the scope of the rational design and construction of cluster-based supramolecular assemblies.     

Construction of [(eta5-C5Me5)MoS3Cu3]-based supramolecular assemblies from the [(eta5-C5Me5)MoS3(CuNCS)3]- cluster anion and multitopic ligands with different symmetries

The assembly of a new family of [(eta5-C5Me5)MoS3Cu3]-supported supramolecular compounds from a preformed cluster [PPh4][(eta5-C5Me5)MoS3(CuNCS)3].DMF (1.DMF) with four multitopic ligands with different symmetries is described. Reactions of 1 with 1,2-bis(4-pyridyl)ethane (bpe) (Cs symmetry) or 1,4-pyrazine (1,4-pyz) (D2h symmetry) in aniline gave rise to two polymeric clusters {[{(eta5-C5Me5)MoS3Cu3}2(NCS)3(mu-NCS)(bpe)3].3aniline}n (2) and [(eta5-C5Me5)MoS3Cu3(1,4-pyz)(mu-NCS)2]n (3). On the other hand, solid-state reactions of 1 with 2,4,6-tri(4-pyridyl)-1,3,5-triazine (tpt) (D3h symmetry) or 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphyrin (H2tpyp) (D4h symmetry if 21H and 23H of the H2tpyp are omitted) at 100 degrees C for 12 h followed by extraction with aniline yielded another two polymeric clusters {[(eta5-C5Me5)MoS3Cu3(tpt)(aniline)(NCS)2].0.75aniline. 0.5H2O}n (4) and {[(eta5-C5Me5)MoS3Cu3(NCS)(mu-NCS)(H2tpyp)0.4(Cu-tpyp)0.1].2aniline.2.5benzene}n (5). These compounds were characterized by elemental analysis, IR spectra, UV-vis spectra, 1H NMR, and X-ray analysis. Compound 2 consists of a 2D (6,3) network in which [(eta5-C5Me5)MoS3Cu3] cores serve both a T-shaped three-connecting node and an angular two-connecting node to interconnect other equivalent units through single bpe bridges, double bpe bridges, and mu-NCS bridges. Compound 3 has a 3D diamondlike framework in which each [(eta5-C5Me5)MoS3Cu3] core, acting as a tetrahedral connecting node, links four other neighboring units by 1,4-pyz bridges and mu-NCS bridges. Compound 4 contains a honeycomb 2D (6,3)core(6,3)tpt network in which each cluster core, serving a trigonal-planar three-connecting node, links three pairs of equivalent cluster cores via three tpt lignads. Compound 5 has a rare scalelike 2D (4,62)core(42,62)ligand network in which each cluster core acts as a T-shaped three-connecting node to link with other equivalent ones through mu-NCS bridges and H2tpyp (or Cu-tpyp) ligands. The results showed that the formation of the four different multidimensional topological structures was evidently affected by the symmetry of the ligands used. In addition, the third-order nonlinear optical properties of 1-5 in aniline were also investigated by using Z-scan techniques at 532 nm.     

Condensed metallaborane clusters: synthesis and structure of Fe2(CO)6(eta5-C5Me5RuCO)(eta5-C5Me5Ru)B6H10

Mild pyrolysis of (eta5-C5Me5Ru)2B6H12 with Fe2(CO)9 yields the 12 skeletal electron pair (sep) Fe2(CO)6(eta5-C5Me5RuCO)(eta5-C5Me5Ru)B6H10 cluster; the title compound represents a novel class of hybrid multiple cluster in which a Fe2B2 tetrahedron has been fused to a ruthenaborane substrate.     

Organometallic Fluorides of Zirconium and Hafnium in the Synthesis of Carboxylate Complexes: Molecular Structures of [{(eta(5)-C(5)Me(5))ZrF(OCOCF(3))(2)}(2)] and [(eta(5)-C(5)Me(5))(2)Zr(OCOCF(3))(2)

The reaction of [(eta(5)-C(5)Me(5))ZrF(3)] and [(eta(5)-C(5)Me(5))HfF(3)] with Me(3)SiOCOCF(3) yields the dinuclear complexes [{(eta(5)-C(5)Me(5))ZrF(OCOCF(3))(2)}(2)] (1) and [{(eta(5)-C(5)Me(5))HfF(OCOCF(3))(2)}(2)] (2), regardless of the molar ratio employed. [(eta(5)-C(5)Me(5))(2)ZrF(2)] reacts with 1 and 2 equiv of Me(3)SiOCOCF(3) to form the mononuclear compounds [(eta(5)-C(5)Me(5))(2)Zr(OCOCF(3))(2)] (3) and [(eta(5)-C(5)Me(5))(2)ZrF(OCOCF(3))] (4), respectively. The molecular structures of 1 and 3 have been determined by single-crystal X-ray analysis: 1, triclinic, P&onemacr;, a = 9.508(3) ?, b = 11.002(4) ?, c = 17.528(3) ?, alpha = 78.55(4), beta = 76.80(2), gamma = 87.51(2) degrees, V = 1750(1) ?(3), Z = 2, R = 0.0378; 3, monoclinic, C2/c, a = 18.553(4) ?, b = 9.110(2) ?, c = 16.323(3) ?, beta = 114.88(3) degrees, V = 2503(1) ?(3), Z = 4, R = 0.0457. Compound 1 shows bridging bidentate and chelating carboxylate ligands as well as bridging fluorine atoms. The zirconium atoms are seven coordinated and have an 18-electron configuration. X-ray studies of 3 reveal two structural components where the carboxylate ligands coordinate in a monodentate (major component) and a chelating manner (minor component).     

Studies of the synthesis and thermochemistry of coordinatively unsaturated chelate complexes (eta 5-C5Me5)IrL2 (L2 = TsNCH2CH2NTs, TsNCH2CO2, CO2CO2)

A comparative synthetic, structural, and thermochemical study on a series of chelate complexes containing the fragment (eta 5-C5Me5)Ir [(eta 5-C5Me5)Ir(TsNCH2CH2NTs) (1), (eta 5-C5Me5)Ir(TsNCH2CO2) (2), (eta 5-C5Me5)Ir(CO2CO2) (3)] was performed to clarify the roles of carboxylato and sulfonamido ligands. Whereas 1 and 2 are monomeric in solution and in the solid state, 3 appears to exist as an oligomer or polymer, (3)n, which can be broken up by addition of a ligand L such as a phosphine, CO, or 2-methoxypyridine to form (eta 5-C5Me5)Ir(L)(CO2CO2) (6). The synthesis of (3)n from [(eta 5-C5Me5)IrCl(mu-Cl)]2 required the use of silver oxalate in CH3CN, but if other solvents were used, the bridging oxalato complex (eta 5-C5Me5)IrCl(mu-eta 2-eta 2-C2O4)ClIr(eta 5-C5Me5) (7) was obtained and identified by X-ray diffraction. Enthalpies for reaction of THF-soluble monomers 1 and 2 with PMe3 were determined to be -28.7(0.5) and -28.5(0.4) kcal mol-1, respectively. The oligomerization behavior of 3 may be a result of reduced sigma- or pi-donation of carboxylato ligands compared to N-tosylamido ligands, because the values for nu CO in oxalato and bissulfonamido complexes 6-CO and (eta 5-C5Me5)Ir(CO)(TsNCH2CH2NTs) (4-CO) were 2064 and 2042 cm-1, respectively.     

Reductive reactivity of the organolanthanide hydrides, [(C5Me5)2LnH]x, leads to ansa-allyl cyclopentadienyl (eta(5)-C5Me4CH2-C5Me4CH2-eta(3))2- and trianionic cyclooctatetraenyl (C8H7)3- ligands

The reductive reactivity of lanthanide hydride ligands in the [(C5Me5)2LnH]x complexes (Ln = Sm, La, Y) was examined to see if these hydride ligands would react like the actinide hydrides in [(C5Me5)2AnH2]2 (An = U, Th) and [(C5Me5)2UH]2. Each lanthanide hydride complex reduces PhSSPh to make [(C5Me5)2Ln(mu-SPh)]2 in approximately 90% yield. [(C5Me5)2SmH]2 reduces phenazine and anthracene to make [(C5Me5)2Sm]2(mu-eta(3):eta(3)-C12H8N2) and [(C5Me5)2Sm]2(mu-eta(3):eta(3)-C10H14), respectively, but the analogous [(C5Me5)2LaH]x and [(C5Me5)2YH]2 reactions are more complicated. All three lanthanide hydrides reduce C8H8 to make (C5Me5)Ln(C8H8) and (C5Me5)3Ln, a reaction that constitutes another synthetic route to (C5Me5)3Ln complexes. In the reaction of [(C5Me5)2YH]2 with C8H8, two unusual byproducts are obtained. In benzene, a (C5Me5)Y[(eta(5)-C5Me4CH2-C5Me4CH2-eta(3))] complex forms in which two (C5Me5)(1-) rings are linked to make a new type of ansa-allyl-cyclopentadienyl dianion that binds as a pentahapto-trihapto chelate. In cyclohexane, a (C5Me5)2Y(mu-eta(8):eta(1)-C8H7)Y(C5Me5) complex forms in which a (C8H8)(2-) ring is metalated to form a bridging (C8H7)(3-) trianion.     

Novel coordinatively unsaturated bimetallic complexes, [(eta5-C5Me5)Ru(mu2-iPrNC(Me)=N(i)Pr)Ru(eta5-C5Me5)]+: a bridging amidinate ligand perpendicular to the metal-metal axis effectively stabilizes the highly reactive cationic diruthenium species.

Coordinatively unsaturated diruthenium complexes, [(eta5-C5Me5)Ru(mu2-iPrNC(Me)=NiPr)Ru(eta5-C5Me5)]+, of which crystallography revealed structures bearing a bridging amidinate ligand perpendicular to the Ru-Ru axis, were synthesized by anion exchange of [(eta5-C3Me5(Ru(mu2-iPrNC(Me)=NiPr)Ru(eta5-C5Me5)]+ Br- by weakly coordinating anions. Variable-temperature NMR showed rapid motion of the bridging amidinate ligand. The coordinatively unsaturated nature of the cationic complexes provides their high reactivity toward a series of two electron donor ligands. Oxidative addition of molecular hydrogen occurred to give [(eta5-C5Me5)Ru(mu2-iPrNC(Me)=NiPr)(mu-H)Ru(eta5-C5Me5)(H)]+, which was isolated and characterized.     

Dinitrogen functionalization with terminal alkynes, amines, and hydrazines promoted by [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2): observation of side-on and end-on diazenido complexes in the reduction of N2 to hydrazine

Functionalization of the N2 ligand in the side-on bound dinitrogen complex, [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2), has been accomplished by addition of terminal alkynes to furnish acetylide zirconocene diazenido complexes, [(eta5-C5Me4H)2Zr(C[triple bond]CR)]2(mu2,eta2,eta2-N2H2) (R = nBu, tBu, Ph). Characterization of [(eta5-C5Me4H)2Zr(C[triple bond]CCMe3)]2(mu2,eta2,eta2-N2H2) by X-ray diffraction revealed a side-on bound diazenido ligand in the solid state, while variable-temperature 1H and 15N NMR studies established rapid interconversion between eta1,eta1 and eta2,eta2 hapticity of the [N2H2]2- ligand in solution. Synthesis of alkyl, halide, and triflato zirconocene diazenido complexes, [(eta5-C5Me4H)2ZrX]2(mu2,eta1,eta1-N2H2) (X = Cl, I, OTf, CH2Ph, CH2SiMe3), afforded eta1,eta1 coordination of the [N2H2]2- fragment both in the solid state and in solution, demonstrating that sterically demanding, in some cases pi-donating, ligands can overcome the electronically preferred side-on bonding mode. Unlike [(eta5-C5Me4H)2ZrH]2(mu2,eta2,eta2-N2H2), the acetylide and alkyl zirconocene diazenido complexes are thermally robust, resisting alpha-migration and N2 cleavage up to temperatures of 115 degrees C. Dinitrogen functionalization with [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) was also accomplished by addition of proton donors. Weak Br?nsted acids such as water and ethanol yield hydrazine and (eta5-C5Me4H)2Zr(OH)2 and (eta5-C5Me4H)2Zr(OEt)2, respectively. Treatment of [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) with HNMe2 or H2NNMe2 furnished amido or hydrazido zirconocene diazenido complexes that ultimately produce hydrazine upon protonation with ethanol. These results contrast previous observations with [(eta5-C5Me5)2Zr(eta1-N2)]2(mu2,eta1,eta1-N2) where loss of free dinitrogen is observed upon treatment with weak acids. These studies highlight the importance of cyclopentadienyl substituents on transformations involving coordinated dinitrogen.     

Organoruthenium(II) and (III) amidinates, (eta5-C5Me5)Ru(eta-amidinate) and (eta5-C5Me5)RuCl(eta-amidinate), as unique redox catalysts for the intramolecular Kharasch reactions: facile access to a pyrrolizidine alkaloid skeleton under mild conditions

A novel organoruthenium(III) amidinate, (eta5-C5Me5)RuCl(eta-iPrN=C(Me)NiPr) (2), has been prepared by oxidation of organoruthenium amidinate, (eta5-C5Me5)Ru(eta-iPrN=C-(Me)NiPr) (1), by organic chlorides; both 1 and 2 are found to be good catalysts for atom-transfer cyclization of N-allyltrichloroacetamides which are useful for successful preparation of a pyrrolizidine alkaloid skeleton under mild conditions.     

Macropolyhedral boron-containing cluster chemistry. Cluster opening and B-frame rearrangement in the reaction of B(16)H(20) with [{(IrCl(2)(eta(5)-C(5)Me(5))}(2)]. Synchrotron X-ray structures of [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(17)Cl] and [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(15)Cl

Products from the reaction of + nido ten-vertex : nido eight-vertex, B(16)H(20) with [{(IrCl(2)(eta(5)-C(5)Me(5))}(2)] and tmnd show unanticipated rearrangement of the starting {B(16)} skeleton, as exhibited by + nido ten-vertex : nido ten-vertex, [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(17)Cl] which has a {B(2)} edge conjunction and by + nido ten-vertex : nido eleven-vertex, [(eta(5)-C(5)Me(5))(2)Ir(2)B(16)H(15)Cl] which has a {B(3)} face conjunction.     

Synthetic, reactivity, and structural studies on half-sandwich (eta5-C5Me5)Be and related compounds: halide, alkyl, and iminoacyl derivatives

The half-sandwich compounds [(eta(5)-C(5)Me(5))BeX] (X=Cl, 1 a; Br, 1 b), readily prepared from the reaction of the halides BeX(2) and M[C(5)Me(5)] (M=Na or K), are useful synthons for other (eta(5)-C(5)Me(5))Be organometallic compounds, including the alkyl derivatives [(eta(5)-C(5)Me(5))BeR] (R=Me, 2 a; CMe(3), 2 b; CH(2)CMe(3), 2 c; CH(2)Ph, 2 d). The latter compounds can be obtained by metathetical exchange of the halides 1 with the corresponding lithium reagent and exhibit NMR signals and other properties in accord with the proposed formulation. Attempts to make [(eta(5)-C(5)Me(5))BeH] have proved fruitless, probably due to instability of the hydride toward disproportionation into [Be(C(5)Me(5))(2)] and BeH(2). The half-sandwich iminoacyl [(eta(5)-C(5)Me(5))Be(C(NXyl)Cp')] and [(eta(5)-C(5)Me(4)H)Be(C(NXyl)Cp')]3, 6 where Xyl=C(6)H(3)-2,6-Me(2) and Cp'=C(5)Me(5) or C(5)Me(4)H, are formed when the beryllocenes [Be(C(5)Me(5))(2)], [Be(C(5)Me(4)H)(2)], and [Be(C(5)Me(5))(C(5)Me(4)H)] are allowed to react with CNXyl. Isolation of three different iminoacyl isomers from the reaction of the mixed-ring beryllocene [(eta(5)-C(5)Me(5))Be(eta(1)-C(5)Me(4)H)] and CNXyl, namely compounds 5 a, 5 b, and 6, provides compelling evidence for the existence in solution of different beryllocene isomers, generated in the course of two very facile processes that explain the solution dynamics of these metallocenes, that is the 1,5-sigmatropic shift of the Be(eta(5)-Cp') unit around the periphery of the eta(1)-Cp' ring, and the molecular inversion rearrangement that exchanges the roles of the two rings.     

Assembly of [(eta5-C5Me5)MoS3Cu3]-supported one-dimensional chains with single, double, triple, and quadruple strands

The construction of a new set of [(eta5-C5Me5)MoS3Cu3]-based supramolecular compounds with different one-dimensional (1D) arrays from two preformed clusters [PPh4][(eta5-C5Me5)MoS3(CuX)3] (X = Br (1a), NCS (1b)) with 1,2-bis(4-pyridyl)ethane (bpe) and 1,3-bis(4-pyridyl)propane (bpp) is presented. Reactions of 1a with bpe in different molar ratios afforded ([((eta5-C5Me5)MoS3Cu3) 2(mu-bpe)3.5Br4].MeCN) n (2), ([((eta5-C5Me5)MoS3Cu3)2(mu-bpe)3Br4].Sol)n (3a: Sol = DMSO.3MeCN; 3b: Sol = 2aniline.3MeCN), ([((eta5-C 5Me5)MoS3Cu3)2(mu-bpe)3(bpe)Br4].0.35DMF)n (4), and ([((eta5-C5Me5)MoS3Cu3)2(mu-bpe)2(mu-Br)(mu3-Br)Br2].DMF.MeCN)n (5). On the other hand, treatment of 1a or 1b with bpp produced [(eta5-C5Me5)MoS3Cu3(mu-bpp)(mu-Br)Br]n (6) and ([((eta5-C5Me5)MoS3Cu3)2(mu-bpp)3(mu-NCS)2(NCS)](NCS))n (7). Compounds 2-7 have been characterized by elemental analysis, UV-vis spectroscopy, IR spectroscopy, 1H NMR, and X-ray analysis. In 2, each [(eta5-C5Me5)MoS3Cu3] core serves as an angular two-connecting node to link other equivalent cores by single and double bpe bridges to form a 1D "Great Wall"-like chain. In 3a and 3b, the [(eta5-C5Me5)MoS3Cu3] cores are linked alternatively by single and double bpe bridges to give a 1D zigzag chain. In 4, six cluster cores (two as a two-connecting node and four as a three-connecting node) are connected by four single bpe and two double bpe bridges to form a cyclohexane-shaped repeating unit, which is further fused with other units to generate a 1D double-stranded chain. Compound 5 has a simple 1D zigzag chain consisting of the cluster cores linked by single bpe bridges. In 6, the cluster cores are linked by single bpp bridges to give a 1D helical chain, which further holds two symmetry-related chains through C-H...Br hydrogen-bonding interactions, thereby forming a 1D H-bonded triple-stranded chain. Compound 7 has a rare 1D quadruple chain, in which the [(eta5-C5Me5)MoS3Cu3] cores work as planar four- and five-connecting nodes to interconnect other equivalent cores through single bpp bridges and single and double thiocyanate bridges. In addition, the third-order nonlinear optical properties of 1a, 2, 3a, and 4-7 in aniline were also investigated by using the Z-scan technique with a 4.5 ns pulse laser at 532 nm.     

Synthetic and theoretical study of the incorporation of metal halides in [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)

The capacity of the imido-nitrido organometallic ligand [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)] (1) to entrap main group metal halides MXn has been investigated. Treatment of 1 with metal halides in toluene or dichloromethane afforded several soluble adducts [MXn(L)] (L=1) in good yields. The reaction of 1 with one equivalent of Group 1 and 13 monohalides MX afforded single cube-type complexes [XM{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Li, X=Br (2), I (3); M=Na, X=I (4); M=In, X=I (5); M=Tl, X=I (6)). Analogous treatment of 1 with Group 2 and 14 dihalides MX(2) gave the corresponding adducts [I2M{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Mg (7), Ca (8), Sr (9)) and [Cl(2)M{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Sn (10), Pb (11)). The treatment of 1 with SnI2 or the reaction of 10 with MeI at 60 degrees C afforded two azametallocubane units linked by two bridging iodine atoms [{ISn(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}2(mu-I)2] (12). Indium triiodide reacted with 1 in toluene to form the adduct [I3In(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)] (13). Density functional theory calculations have been carried out to study these processes and evaluate the influence of the solvent. X-ray crystal structure determinations have been performed for complexes 10, 12, and 13.     

Macropolyhedral boron-containing cluster chemistry. Ligand-induced two-electron variations of intercluster bonding intimacy. Structures of nineteen-vertex [(eta5-C5Me5)HIrB18H19(PMe2Ph)] and the related carbene complex [(eta5-C5Me5)HIrB18H19[C(NHMe)2]

Addition of PMe2Ph to fused-cluster syn-[(eta5-C5Me5)IrB18H20] 1 to give [(eta5-C5Me5)HIrB18H19(PMe2Ph)] 3 entails a diminution in the degree of intimacy of the intercluster fusion, rather than retention of inter-subcluster binding intimacy and a nido-->arachno conversion of the character of either of the subclusters. Reaction with MeNC gives [(eta5-C5Me5)HIrB18H19[C(NHMe)2]] 4 which has a similar structure, but with the ligand now being the carbene [:C(NHMe)2], resulting from a reductive assembly reaction involving two MeNC residues and the loss of a carbon atom.     

On the origin of dinitrogen hydrogenation promoted by [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2)

The origin of the hydrogenation of the dinitrogen ligand in [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) has been investigated by a combined computational and experimental study. Density functional theory calculations on the zirconocene dinitrogen complex demonstrate significant imido character in the zirconium nitrogen bonds, arising from effective pi-back-bonding from the low-valent zirconium and the side-on bound N2 ligand. The twisted ground-state structure of the N2 complex is a key requirement for nitrogen hydrogenation, as calculations on the model complex [(eta5-C5H5)2Zr]2(mu2,eta2,eta2-N2) reveal reduced overlap as the dihedral angle between the zirconocene wedges approaches 0 degrees . Experimentally, isotopic labeling studies on the microscopic reverse are consistent with a 1,2-addition mechanism for nitrogen hydrogenation.     

Utilisation of an eta(3)-allyl hydride complex, formed by UV irradiation, as a controlled source of 16-electron (eta(5)-C(5)Me(5))Rh(CH(2)[double bond, length as m-dash]CHMe)

Low temperature UV irradiation of solutions of (eta(5)-C(5)Me(5))Rh(CH(2)[double bond, length as m-dash]CHMe)(2) yields (eta(5)-C(5)Me(5))Rh(eta(3)-CH(2)CHCH(2))(H), which provides controlled access to the 16-electron fragment (eta(5)-C(5)Me(5))Rh(CH(2)[double bond, length as m-dash]CHMe).