Transport of steroids in poly(etherurethane) and poly(ethylene vinyl acetate) membranes

The permeability of polymer membranes to steroids was studied as a function of both permeant and membrane properties, using nine steroids and copolymer membranes prepared from poly(etherurethanes) and poly(ethylene vinyl acetates). Permeabilities, diffusion coefficients, and solubilities of the steroids in the membranes were determined in sorption—desorption and permeation experiments. Steroids with higher melting points permeated more slowly. This relationship originated from the lower diffusivities and solubilities of higher-melting steroids in the polymer phase; the effect of solubility changes was predominant. Reducing the polyether content of poly(etherurethane)merebranes ten-fold decreased their permeability to androstenedione by four orders of magnitude (from 10^?10 to 10^?14 g steroid/cm-sec at 37°C), due largely to diffusivity decreases. In contrast, reducing the vinyl acetate content of poly(ethylene vinyl acetate) membranes from 40% to 9% produced only modest changes in bath steroid solubility and diffusion coefficient. The permeability to androstenedione within this series of copolymer membranes ranged between 10^?11 and 10^?12 g steroid/cm-sec at 37°C.     

Oxygen permeability of biodegradable copolycaprolactones

Polycaprolactone is one of the biodegradable polymers with good drug permeability. In the present paper, polycaprolactone and three kinds of copolycaprolactone–polycaprolactone–poly(ethylene oxide)– polycaprolactone triblock copolymer (PCE), polycaprolactone/polycaprolactone‐poly(ethylene oxide)/polylactide tricomponents random block copolymer (PCEL) and polycaprolactone/poly(ethylene terephthalate) random block copolymer (PETCL)– were synthesized. The biodegradation behavior of these polymers were shown by degradation tests in vitro, ex vivo and in vivo. The oxygen permeabilities of these polymers were in the range of 10⁻¹⁰ ∼ 10⁻⁹ cm³ (STP) cm/cm² sec cm Hg. Copolymers PCE and PCEL displayed O₂ and N₂ permeability coefficients (PO₂/PN₂) ratios of about 9. The effects of composition and crystallinity of the copolymers on biodegradability and the oxygen permeability of the polymer were discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Modification of porous poly(vinylidene fluoride) membrane using amphiphilic polymers with different structures in phase inversion process

Three kinds of amphiphilic polymers, including the tri-block copolymer of (polyethylene oxide)–(polypropylene oxide)–(polyethylene oxide) (I, EPTBP), the comb-like copolymer of polysiloxane with polyethylene oxide and polypropylene oxide side chains (II, ACPS) and the hyperbranched star copolymer of polyester-g-methoxyl polyethylene glycol (III, HPE-g-MPEG), were blended with PVDF to fabricate porous membranes via a phase inversion process, respectively, and the effects of the different structures of the amphiphilic polymers on the properties of the blend membranes were compared. The membranes were characterized by scanning electron microscopy (SEM), elemental analysis, X-ray photoelectron spectroscopy (XPS) analysis, mercury porosimetry, water contact angle measurements, etc. The anti-fouling properties of the prepared membranes were evaluated by static and dynamic bovine serum albumin (BSA) adsorptions. Specially, the stabilities of these amphiphilic polymers in the final membranes were estimated by continuous leaching tests. At the same time, the properties of the membranes using the amphiphilic polymers as modifiers were compared with those of the membrane using poly(ethylene glycol) (PEG) as modifier.     

Effect of the structure of ethylene oxide-propylene oxide block copolymers on their interaction with biological membranes

Partition coefficients of ethylene oxide-propylene oxide block copolymers between the lipid phase and water have been estimated via equilibrium dialysis. It has been shown that for the triblock copolymer (Pluronic L61), the partition coefficient is 45 ± 9, while for the diblock copolymer (REP), this parameter is as high as 78 ± 17. The effect of the copolymers on the permeation of the charged organic ion carboxyfluorescein across the lecithin bilayer membrane changes in the same direction. Even though the triblock copolymer binding is weaker, it shows a stronger effect on the rate of transbilayer migration of lipids and on the permeation of the uncharged substance (doxorubicin). The incorporation of cholesterol into the membrane decreases its sensitivity to the action of copolymers; however, the character of changes induced by both copolymers remains invariable. The experimental data of this study indicate that the triblock structure of amphiphilic macromolecules is responsible for their higher ability to disturb lipid bilayer membranes.     

Block copolymer vesicle permeability measured by osmotic swelling and shrinking

Vesicle response to osmotic shock provides insight into membrane permeability, a highly relevant value for applications ranging from nanoreactor experimentation to drug delivery. The osmotic shock approach has been employed extensively to elucidate the properties of phospholipid vesicles (liposomes) and of varieties of polymer vesicles (polymersomes). This study seeks to compare the membrane response for two varieties of polymersomes, a comb-type siloxane surfactant, poly(dimethylsiloxane)-g-poly(ethylene oxide) (PDMS-g-PEO), and a diblock copolymer, polybutadiene-b-poly(ethylene oxide) (PBut-b-PEO). Despite similar molecular weights and the same hydrophilic block (PEO), the two copolymers possess different hydrophobic blocks (PBut and PDMS) and corresponding glass transition temperatures (-31 and -123 °C, respectively). Dramatic variations in membrane response are observed during exposure to osmotic pressure differences, and values for polymer membrane permeability to water are extracted. We propose an explanation for the observed phenomena based on the respective properties of the PBut-b-PEO and PDMS-g-PEO membranes in terms of cohesion, thickness, and fluidity.     

Polymeric vesicle permeability: a facile chemical assay

We present a simple method to characterize vesicles and determine, at the same time, the membrane permeability to specific molecules. The method is based on encapsulating highly hydrophilic 3,3',3' '-phosphinidynetris-benzenesulfonic acid (PH) into vesicles and subsequently monitoring its reaction with 5,5'-dithiobis-2-nitrobenzoic acid (DTNB). We tested the method by measuring the membrane permeability of vesicles formed from a series of poly(ethylene oxide)-co-polybutylene oxide (EB) copolymers and egg yolk phosphatidylcholine. We found that the experimental data are in good agreement with calculations based on Fick's first law. We therefore quantified the DTNB permeability across vesicle membranes, finding that polymeric EB membranes have a more selective permeability toward polar molecules compared to phospholipids membranes.     

Compatibility studies of styrene and hydroxyl containing styrene copolymers with poly(ethylene oxide)

Copolymers of styrene with vinylphenyl trifluoromethyl carbinol, p-vinylphenyl trifluoromethyl carbinol, vinylphenyl hexafluorodimethyl carbinol, and p-vinylphenol are conditionally compatible with poly(ethylene oxide), depending on their composition and blending ratios, whereas copolymers of styrene and vinylphenyl methyl carbinol are much less compatible with poly(ethylene oxide), as determined by T_g criteria and differential scanning calorimetry. The crystallinity of poly(ethylene oxide) is changed in the copolymer/poly(ethylene oxide) blends, as indicated by depressions of the poly(ethylene oxide) melting point. Hydrogen-bond formation has been studied in two selected blends by infrared (IR) spectroscopy. Hydrogen bonding dissociation and reassociation as a function of temperature are reported. The conformation changes of poly(ethylene oxide) in the blends, the interaction between copolymer and poly(ethylene oxide) as well as in the reference blend, polystyrene/poly(ethylene oxide), are also investigated.     

环氧乙烷环氧丙烷共聚醚的研究进展

综述了环氧乙烷环氧丙烷共聚醚的聚合机理聚合工艺及其应用.环氧乙烷环氧丙烷共聚醚的聚合按其催化剂体系的机理可以分为阴离子聚合、阳离子聚合和配位聚合三类,其中阳离子聚合应用较少.在环氧乙烷和环氧丙烷开环聚合生成共聚醚的反应中,不同的反应工艺条件对生成的聚醚有着很大的影响.同样比例的环氧乙烷和环氧丙烷,因聚合反应器设计、反应器种类、起使剂种类催化剂种类与用量温度加料方式端基结构等的不同,所合成的共聚醚会产生不同的结构和性能.环氧乙烷环氧丙烷共聚形成的聚醚可以分为嵌段共聚醚和无规共聚醚两类.其中,嵌段共聚醚可以分为EPE和PEP两类.     

Vesicles with asymmetric membranes from amphiphilic ABC triblock copolymers

A new amphiphilic ABC triblock copolymer (poly(ethylene oxide)-poly(dimethyl siloxane)-poly(methyl oxazoline)) has been synthesized and demonstrated to form vesicular structures with asymmetric membranes in aqueous media.     

Gas Permeation Properties of Organic-Inorganic Hybrid Membranes Prepared from Hydroxyl-Terminated Polyether and 3-isocyanatopropyltriethoxysilane

Organic-inorganic hybrid materials were prepared by reacting 3-isocyanatopropyltriethoxysilane (IPTS) with hydroxyl terminated poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG) and poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) (PEPG), followed by hydrolysis and condensation with acid catalysis. Composite membranes have been obtained by casting hybrid sol on the microporous polysulfone substrate. The membranes were characterized by Fourier transform infrared (FT-IR), ¹³C NMR and ²⁹Si NMR. The permeability coefficients of N₂, O₂, CH₄ and CO₂ were measured by variable volume method. The gas permeability coefficients increase with increasing molecular weight of the polyethers. For the membranes containing PEG and PEPG, the higher values of CO₂ permeability coefficients and CO₂/N₂ separation factors are due to the presence of ethylene oxide segments. In case of PEPG membranes, molecular weight has more influence on CO₂ permeability than the effect of facilitation by ethylene oxide. The addition of TEOS into hybrid sol results in the decrease of all the gas permeability and does not affect the gas selectivity. PEG2000 membrane display the most performance among the hybrid membranes investigated here. The best values observed are CO₂ permeability of 94.2 Barrer with selectivity of 38.3 for CO₂/N₂ and 15.6 for CO₂/CH₄.     

Morphology of PMMA/polyoxide blends and grafted copolymers using etching and staining techniques

The morphology of poly(methyl methacrylate), poly(ethylene oxide) blend and the grafted copolymer poly(methyl methacrylate-g-ethylene oxide) was observed by scanning electron microscopy. The contrast was obtained by an etching technique, removing the PEO phase out of the blend. The PEO phase of the copolymer was stained with OsO₄ and better contrast was observed using a back-scattering image. The PEO phase was shown to be distributed as spherical domains in the PMMA matrix for both the copolymer and the blend.     

PEO-PPO block copolymer vectors do not interact directly with DNA but with lipid membranes

Small angle neutron (SANS) and light scattering was used to study the interaction between fragments of double stranded deoxyribonucleic acid (DNA) and a synthetic triblock [poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)] amphiphilic polymer, known as L64, a potential vector for gene therapy. The mechanism of action of this vector is yet unknown. The contrast variation method was used to separate the partial structure factors of the different components in mixtures of triblock and DNA. It has been found that the copolymer and DNA molecules exhibit repulsive interactions. Further, the interaction between the copolymer and a model lipid membrane was investigated in order to explain the action of the vector. Electrical measurements on black lipid membranes indicated that the main effect of L64 as a vector is to permeabilize the cell's membrane.     

Pathways of polymeric vesicle formation

Polymeric vesicle formation is dictated by the mutual diffusion of water into the bulk block copolymer and vice versa. The hydration of three poly(ethylene oxide)-co-poly(butylene oxide) copolymers with different molecular weights has been monitored both macroscopically (confocal laser scanning microscopy) and microscopically (small-angle X-ray scattering). Both methods have revealed that the amphiphilic block copolymers swell in water following two qualitatively different growth regimes. Initially, water and copolymer diffuse into each other following a subdiffusional growth as the result of a molecular-level arrangement of the amphiphilic membranes that comprise the swollen copolymer. After a critical time, which is exponential in polymer molecular weight, the amphiphilic membranes reach their equilibrium morphology and as a consequence the growth starts to follow Fickian diffusion. The complex hydration kinetics dictate the phases formed at the interface between the amphiphilic copolymer and water. Upon hydration of simple amphiphiles, the amphiphilic film swells and the concentration gradient at the interface with water gradually drops to zero. This strongly affects the complex driving forces that control vesicle formation. Indeed, to form vesicles, an energy barrier has to be overcome, and therefore a constant concentration gradient is required. We show, by enhancing the hydration kinetics via an ac field, how the interface concentration gradient is kept constant and the magnitude of this gradient dictates the final size of the vesicles.     

Interactions of amphiphilic block copolymers with lipid model membranes

Studies on interactions between amphiphilic block copolymers and lipid membranes have been focused traditionally on ABA triblock copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), widely due to their commercial availability. However, new architectures of amphiphilic block copolymer have been synthesized in recent years partially taking advantage of new polymerization techniques. This review focuses on amphiphilic block copolymers with potential biological activity and on model membrane systems used for studying interactions with such block copolymers. Experimental methods to study block copolymer–phospholipid interactions in Langmuir monolayers, liposomes, and planar bilayers are summarized. This work is intended to convey a better understanding of amphiphilic block copolymers used for in vitro and in vivo experiments in medicine and pharmacy. Recent developments and open questions are addressed.     

Structure characterizations and protein resistance of chitosan membranes selectively crosslinked by poly(ethylene glycol) dimethacrylate

Chitosan (CS) is a fragile material with a high modulus of elasticity. Improving its flexibility as well as membrane permeability are the key aspects that need to be addressed for using CS as a biomaterial. Poly(ethylene glycol) (PEG) has several unique properties such as protein resistance, low toxicity, immunogenicity, and good solubility in both water and organic solvents. In this study, a vinyl compound was grafted to the C-6 position of CS by protection-grafting-deprotection. The vinyl CS was then crosslinked with PEG dimethacrylate (PEGDMA) selectively at its C-6 position to form CS-g-PEG copolymer membranes. Analyses from spectra of Fourier-transform infrared and nuclear magnetic resonance confirmed the chemical structure of the crosslinking CS-g-PEG copolymer membranes. Thermal and mechanical properties of the prepared CS-g-PEG membranes were measured and well-correlated to their structures. The incorporation of PEGDMA into the CS increased the material’s flexibility and thermal resistance. Finally, the CS-g-PEG membranes were found to have good protein resistance and blood compatibility; therefore, it has potential application as the biomedical material especially for hemodialysis.     

Specific phenomena during the copolymerization of trioxane and ethylene oxide

We, at Asahi Chemical in Japan, have industrialized three types of polyacetal resins, that is, the acetal homopolymer, copolymer and block copolymer using anionic, cationic and anionic polymerization techniques, respectively. During this industrialization, we observed various phenomena, which were not previously reported. First, the authors outline the three technologies for producing each type of polyoxymethylene from an industrial viewpoint. Next, the authors discuss a newly found reaction during the induction period of the trioxane and ethylene oxide copolymerization. Experimental proof of direct ring expansion between the reaction of trioxane and ethylene oxide is discussed and various novel cyclic compounds are also shown. To the best of our knowledge, this reaction may be the world's first experimental proof of direct ring expansion of the reaction of a cyclic monomer. Third, the authors also discuss the newly founded morphospecific polymer from the copolymerization of trioxane and ethylene oxide using boron trifluoride dibutyl ether as an initiator.     

Synthesis and characterization of a poly(para-phenyleneethynylene)-block-poly(ethylene oxide) rod-coil block copolymer

The synthesis of the poly(para-phenyleneethynylene)-block-poly(ethylene oxide) block copolymer (PPE-b-PEO) ( 1 ) via condensation of endfunctionalized poly(para-phenyleneethynylene) (PPE) ( 5 ) and poly(ethylene oxide) monomethyl ether (PEO) is reported. This is achieved by the initial synthesis of a PPE homopolymer with quantitative terminal functionalization, as proven by ¹H NMR and field desorption mass spectrometry (FD-MS). Reaction of the latter with PEO affords the block copolymer 1 , which was characterized by ¹H NMR spectroscopy, FD-MS and gel permeation chromatography (GPC). Furthermore it is shown that matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS) is a suitable method to investigate PPE-b-PEO with respect to molecular weights and copolymer composition.     

Templated nanostructured PS‐b‐PEO nanotubes

With anodic aluminum oxide (AAO) membranes as wetting templates, nanotubes of the cylinder‐forming polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) copolymer were generated. The PS‐b‐PEO solution was introduced into the cylindrical nanopores of an AAO membrane by capillary force and polymeric nanotubes formed after solvent evaporation. Because of the water solubility of the cylindrical PEO microdomains and the orientation of the cylindrical PEO microdomains with respect to the nanotube walls, the nanotubes were permeable to aqueous media. PS‐b‐PEO nanotubes were also prepared on the interior walls of amorphous carbon nanotubes (a‐CNTs). Because of the unique water permeability of the PEO microdomains, an avenue for functionalizing the interior of the a‐CNTs is enabled. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2912–2917, 2007     

Interaction between cationic, anionic, and non-ionic surfactants with ABA block copolymer Pluronic PE6200 and with BAB reverse block copolymer Pluronic 25R4

The interaction in aqueous solution between either the normal block copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide): Pluronic PE6200 [(EO)(11)-(PO)(28)-(EO)(11)], or the reverse block copolymer poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide): Pluronic 25R4 [(PO)(19)-(EO)(33)-(PO)(19)] and the surfactants sodium decylsulfate, C(10)OS, decyltrimethyl ammonium bromide, C(10)TAB, and pentaethylene glycol monodecyl ether, C(10)E(5), was investigated and the aggregation behavior of these surfactants with Pluronics was compared. Surface tension measurements show that Pluronics in their non-aggregated state better interact with the anionic surfactant C(10)OS than with cationic and non-ionic ones. The presence of the two Pluronics induces the same lowering of the aggregation number of C(10)OS as shown by fluorescence quenching measurements. The number of polymer chains necessary to bind each C(10)OS aggregate has been estimated to be approximately 6 for PE6200 and approximately 2 for 25R4. Furthermore, this surfactant also induces the same increment in the gyration radius of the polymers as revealed by viscosimetry. Calorimetric results have been reasonably reproduced by applying a simple equilibrium model to the aggregation processes.     

Synthesis,characterization, and property of amphiphilic fluorinated abc‐type triblock copolymers

Novel amphiphilic fluorinated ABC‐type triblock copolymers composed of hydrophilic poly(ethylene oxide) monomethyl ether (MeOPEO), hydrophobic polystyrene (PSt), and hydrophobic/lipophobic poly(perfluorohexylethyl acrylate) (PFHEA) were synthesized by atom transfer radical polymerization (ATRP) using N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst system. The bromide‐terminated diblock copolymers poly(ethylene oxide)‐block‐polystyrene (MeOPEO‐b‐PSt‐Br) were prepared by the ATRP of styrene initiated with the macroinitiator MeOPEO‐Br, which was obtained by the esterification of poly(ethylene oxide) monomethyl ether (MeOPEO) with 2‐bromoisobutyryl bromide. A fluorinated block of poly(perfluorohexylethyl acrylate) (PFHEA) was then introduced into the diblock copolymer by a second ATRP process to synthesize a novel ABC‐type triblock copolymer, poly(ethylene oxide)‐block‐polystyrene‐block‐poly(perfluorohexylethyl acrylate) (MeOPEO‐b‐PSt‐b‐PFHEA). These block copolymers were characterized by means of proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC). Water contact angle measurements revealed that the polymeric coating of the triblock copolymer (MeOPEO‐b‐PSt‐b‐PFHEA) shows more hydrophobic than that of the corresponding diblock copolymer (MeOPEO‐b‐PSt). Bovine serum albumin (BSA) was used as a model protein to evaluate the protein adsorption property and the triblock copolymer coating posseses excellent protein‐resistant character prior to the corresponding diblock copolymer and polydimethylsiloxane. These amphiphilic fluoropolymers can expect to have potential applications for antifouling coatings and antifouling membranes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011