New crystalline polymers: poly(2,5‐dialkyl‐1,4‐phenylene oxide)s

New heat‐reversibly crystalline poly‐(alkylated phenylene oxide)s are described. the oxidative polymerization of 2,5‐dimethylphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane) copper dichloride produced poly(2,5‐dimethyl‐1,4‐phenylene oxide), which showed heat‐reversible crystallinity with a high melting point at ca. 300°C, although the isomeric polymer, poly(2,6‐dimethyl‐1,4‐phenylene oxide), never recrystallizes once melted. The polymerization of 2,5‐diethylphenol and 2,5‐dipropylphenol gave the polymers consisting of 1,4‐phenylene oxide units; the latter polymer possessed heat‐reversible crystallinity, however, the former one did not.     

1:1 Adducts of 2,2′‐[isopropylidenebis(p‐phenyleneoxy)]diacetic acid with dimethylammonium and 4,4′‐bipyridine

The title compounds, dimethylammonium 2‐{4‐[1‐(4‐carboxymethoxyphenyl)‐1‐methylethyl]phenoxy}acetate, C₂H₈N⁺·C₁₉H₁₉O₆⁻, (I), and 2,2′‐[isopropylidenebis(p‐phenyleneoxy)]diacetic acid–4,4′‐bipyridine (1/1), C₁₉H₂₀O₆·C₁₀H₈N₂, (II), are 1:1 adducts of 2,2′‐[isopropylidenebis(p‐phenyleneoxy)]diacetic acid (H₂L) with dimethylammonium or 4,4′‐bipyridine. The component ions in (I) are linked by N—H...O, O—H...O and C—H...O hydrogen bonds into continuous two‐dimensional layers parallel to the (001) plane. Adjacent layers are stacked via C—H...O hydrogen bonds into a three‐dimensional network with an –ABAB– alternation of the two‐dimensional layers. In (II), two H₂L molecules, one bipy molecule and two half bipy molecules are linked by O—H...N hydrogen bonds into one‐dimensional chains and rectanglar‐shaped rings. They are assembled viaπ–π stacking interactions and C—H...O hydrogen bonds into an intriguing zero‐dimensional plus one‐dimensional poly(pseudo)rotaxane motif.     

Synthesis of new 3,3′‐(1,4‐phenylene)bis(1,5‐diones) derivatives

Several 3,3′‐(1,4‐phenylene)bis(1,5‐diones) and their chalcone precursors have been prepared in good to excellent yield via aldol addition and Michael addition starting from 3‐acetyl‐2,5‐dimethylfuran or 3‐acetyl‐2,5‐dimethyl‐thiophene with terephthalaldehyde in the presence of appropriate base NaOH or lithium diisopropylamide. The kind and amount of alkali played a critical role in improving the reaction rates and yields of the products. J. Heterocyclic Chem., (2011).     

Crystallographic report: (2,2′‐Bipyridyl)bis(ethanoldithiocarbamato)zinc(II)

Zn(meadtc)₂(2,2′‐bipy) is a ZnS₃N₂ chromophore with a distorted square pyramidal geometry. The IR band at 1002 cm^?1 and the bond valence sum value of 1.98 confirmed the monodentate dithiocarbamate in coordination. The non‐bonding Zn–S distance is 5.004(3) Å. Copyright © 2004 John Wiley & Sons, Ltd.     

Tris(2,2′‐bipyridine)iron(II) bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide) dihydrate: chiral hydrogen‐bonded frameworks interpenetrate in three dimensions

In the title compound, [Fe(C₁₀H₈N₂)₃](C₉H₅N₄O)₂·2H₂O, the chiral cations lie across twofold rotation axes in the space group C2/c. The anions and the water molecules are linked by two independent O—H...N hydrogen bonds to form C₂²(8) chains, and these chains are linked by the cations via C—H...N and C—H...O hydrogen bonds to form two interpenetrating three‐dimensional frameworks, each of which contains only one enantiomeric form of the chiral cation.     

Poly(2,5‐dihydroxy‐1,4‐phenylene benzobisthiazole)/poly(1,4‐phenylene benzobisthiazole) copolymers: Chain packing and properties

Crystal‐packing, optical, and electrical properties of poly(2,5‐dihydroxy‐1,4‐phenylene benzobisthiazole) (DiOH‐PBZT) and copolymers of DiOH‐PBZT/poly(1,4‐phenylene‐benzobisthiazole) (PBZT) were examined. Intramolecular hydrogen bonds between the hydroxyl units and the neighboring nitrogen atoms, as evidenced by the IR spectra, led to the formation of a pseudoladder chain structure and changed the chain packing. The (200) and (010) planes were both affected by the copolymer composition, with the (200) plane spacing increasing from 5.895 to 6.482 Å and the (010) plane spacing decreasing from 3.539 to 3.404 Å with the transition from the unsubstituted PBZT homopolymer to the DiOH‐PBZT homopolymer. The cell dimensions of the copolymers were simple averages of those of the individual homopolymers, suggesting the isomorphic crystal structure formation of the two units. The c‐axis spacing, however, remained unchanged. The increase in the conjugation length of the copolymers as the dihydroxy content increased was confirmed by the bathochromic shift of the absorption band in the ultraviolet–visible spectra. The intrinsic conductivities of the copolymers were 3 orders of magnitude higher than that of the unsubstituted PBZT. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 559–565, 2001     

{3,3′‐[2,2′‐(Ethylenedioxy)dibenzyl­idene]bis(S‐methyl dithiocarbazate)}­nickel(II)

The tetradentate N₂S₂ Schiff base ligand 3,3′‐[2,2′‐(ethyl­ene­di­oxy)di­benzyl­idene]­bis­(S‐methyl di­thio­car­ba­zate) (H₂L), prepared by the condensation of S‐methyl di­thio­carb­aza­te with 1,4‐bis(2‐formyl­phenyl)‐1,4‐dioxa­butane in a 1:2 molar ratio, reacts with nickel acetate to form the title neutral metal complex, [Ni(C₂₀H₂₀N₄O₂S₄)]. The X‐ray structure of the complex shows a distorted square‐planar geometry around the Ni atom. The monomeric units are weakly associated into dimers via a long Ni?S interaction [3.569 (1) Å]. These dimeric units are then linked by C—H?S intermolecular contacts to form a polymeric chain along the a axis.     

2,2′‐Bipyridinium bis(perchlorate)

The title compound, [H₂bipy](ClO₄)₂ or C₁₀H₁₀N₂²⁺·2ClO₄^?, was obtained at the interface between an organic (2,2′‐bi­pyridine in methanol) and an aqueous phase (perchloric acid in water). The compound crystallizes in space group P and comprises discrete diprotonated trans‐bipyridinium cations, [H₂bipy]²⁺, and ClO₄^? anions. The cations and anions are connected through N—H?O and C—H?O hydrogen bonds [distances N?O 2.817 (4) and 2.852 (4) Å, and C?O 3.225 (6)–3.412 (5)Å]. The C—C bond distance between the two rings is 1.452 (5) Å. The bipyridinium cation has a trans conformation and the N—C—C—N torsion angle is 152.0 (3)°.     

Chain extension of adipic acid and (or) succinic acid/butanediol polyesters with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) and adipoylbiscaprolactamate combined chain extenders

This paper provided an easy and flexible method to synthesize high molecular weight polyesters by polycondensation and chain extension. Low molecular weight polybutylene adipate, polybutylene succinate, and poly(butylene succinate‐co‐butylene adipate) (PBSA) were synthesized through melt condensation polymerization from adipic acid and/or succinic acid with butanediol. The prepolyesters obtained had different amount of ? COOH and ? OH terminal groups. Chain extension of them was carried out at 180–240°C using 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) and adipoyl biscaprolactamate as combined chain extenders. The influencing factors of the chain extension were studied. At the optimal conditions, chain‐extended polybutylene adipate with M_n up to 39,100, polybutylene succinate with intrinsic viscosity of 0.99 dl/g, and PBSA with intrinsic viscosity from 0.73 to 0.81 dl/g were synthesized. The chain‐extended polyesters were characterized by IR spectrum, ¹H NMR spectrum, differential scanning calorimetry, thermogravimetric analysis (TGA), wide angle X‐ray scattering, and tensile test. The thermal analysis showed that chain extension often led to slight decrease of the regularity, the crystallinity, and the melting point. This deterioration of the properties is not harmful enough to impair their thermal properties and obstruct them from being used as biodegradable thermoplastics. The TGA showed that the chain‐extended polyesters were stable with initial decomposition temperature over 354.7°C. The tensile strength of the chain extended PBS and PBSAs with butylene adipate units less than 20 mol% was in the range of 18.95–31.22 MPa. Copyright © 2010 John Wiley & Sons, Ltd.     

Blue photo‐ and electroluminescence based on poly(2‐benzoyl‐1,4‐phenylene) and poly(2,5‐dibenzoyl‐1,4‐phenylene)

Poly(2‐benzoyl‐1,4‐phenylene) (PBP) and poly(2,5‐dibenzoyl‐1,4‐phenylene) (PDBP) were synthesized by coupling polymerization using a Ni catalyst of 2,5‐dichlorobenzophenone and 2,5‐dichloro‐1,4‐dibenzophenone, respectively. These polymers are soluble in common organic solvents, have high thermal stability and show bright blue photoluminescence. Light‐emitting diodes fabricated with these polymers as the active layer emit blue electroluminescence with wavelength at 433 nm for PBP and 475 nm for PDBP. Copyright © 1999 John Wiley & Sons, Ltd.     

Electrochemical Synthesis and Optical Properties of a Chiral Poly[1,4‐bis(3′,4′‐ethylenedioxythienyl)‐phenylene] Derivative

Summary: Optically active poly[(R)‐ or (S)‐1,4‐bis(2‐(3′,4′‐ethylenedioxy)thienyl)‐2‐benzoic acid 1‐methylheptyl ester] was prepared by an electrochemical technique and characterized by circular dichroism measurements. It was found that the optical activity and optical rotation of the film could be controlled by adjusting the electronic state of the electrochemical process. Polymer films prepared in the oxidized state exhibit a weak Cotton effect, while the reduced polymer film exhibits the expected mirror‐image bisignate Cotton effect in the region of the π–π* transition of the polymer main chain. These results indicate that the main chain itself is chiral in the film state. This procedure has great potential for the preparation of functional electrochromic devices and the improved preparation of durable electrochromic devices based on the good film‐forming properties of the chiral polymer.

Cyclic voltammogram and CD spectra of the chiral polymer thin film produced here.     

Hydrogen‐bonded assemblies in the molecular crystals of 2,2′‐thiodiacetic acid with ethylenediamine and o‐phenylenediamine

Carboxylate molecular crystals have been of interest due to the presence of hydrogen bonding, which plays a significant role in chemical and crystal engineering, as well as in supramolecular chemistry. Acid–base adducts possess hydrogen bonds which increase the thermal and mechanical stability of the crystal. 2,2′‐Thiodiacetic acid (Tda) is a versatile ligand that has been widely explored, employing its multidendate and chelating coordination abilities with many metals; however, charge‐transfer complexes of thiodiacetic acid have not been reported. Two salts, namely ethylenediaminium 2,2′‐thiodiacetate, C₂H₁₀N₂²⁺·C₄H₄O₄S₂²⁻, denoted Tdaen, and 2‐aminoanilinium 2‐(carboxymethylsulfanyl)acetate, C₆H₉N₂⁺·C₄H₅O₄S⁻, denoted Tdaophen, were synthesized and characterized by IR, ¹H and ¹³C NMR spectroscopies, and single‐crystal X‐ray diffraction. In these salts, Tda reacts with the aliphatic (ethylenediamine) and aromatic (o‐phenylenediamine) diamines, and deprotonates them to form anions with different valencies and different supramolecular networks. In Tdaen, the divalent Tda²⁻ anions form one‐dimensional linear supramolecular chains and these are extended into a three‐dimensional sandwich‐type supramolecular network by interaction with the ethylenediaminium cations. However, in Tdaophen, the monovalent Tda⁻ anions form one‐dimensional zigzag supramolecular chains, which are extended into a three‐dimensional supramolecular network by interaction with the 2‐aminoanilinium cations. Thus, both three‐dimensional structures display different ring motifs. The structures of these diamines, which are influenced by hydrogen‐bonded assemblies in the molecular crystals, are discussed in detail.     

Tetraethylammonium dihydrogenarsenate bis(arsenic acid) and 1,4‐diazoniabicyclo[2.2.2]octane bis(dihydrogenarsenate) arsenic acid: hydrogen‐bonded networks containing dihydrogenarsenate anions and neutral arsenic acid molecules

The title compounds, (C₈H₂₀N)[H₂AsO₄][H₃AsO₄]₂, (I), and (C₆H₁₄N₂)[H₂AsO₄]₂[H₃AsO₄], (II), are unusual salts containing organic cations, dihydrogenarsenate anions and neutral arsenic acid molecules. In (I), the dihydrogenarsenate anion lies across a twofold rotation axis in the space group C2/c, while the cation is disordered across a centre of inversion. The [H₂AsO₄]⁻ and H₃AsO₄ species interact by way of O—H...O hydrogen bonds, leading to sheets and a three‐dimensional network for (I) and (II), respectively.     

Synthesis and characterization of some new 4,4′‐(1,4‐phenylene)dipyrimidine and 6,6′‐(1,4‐phenylene)‐di(pyridin‐2(1H)‐one) derivatives

A series of new 4,4′‐(1,4‐phenylene)dipyrimidines 5a–c, 8a–c , and 10a,b have been synthesized from the reaction of amidines 1a–c with the dienaminone 2 , bis‐chalcone 6 , or ylidenemalono‐ nitrile 9 . The reaction of malononitrile and ethyl cyanoacetate with 2 gave 6,6′‐(1,4‐phenylene)di(pyridin‐2(1H)‐ones) ( 15a,b ). The structures of the products were proved by elemental analyses, IR, MS, ¹H, and ¹³C NMR spectroscopy. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:507–512, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20150     

Hydrogen‐bonded molecular ladders in 1,4‐bis(4‐chlorophenylsulfonyl)‐2,5‐dimethylbenzene

In the title compound, C₂₀H₁₆Cl₂O₄S₂, the mol­ecules lie across centres of inversion. A single type of intermolecular C—H?O hydrogen bond, with a C?O distance of 3.254 (3) Å and a C—H?O angle of 132°, links the mol­ecules into ladders whose uprights form C(6) chains and whose rungs enclose centrosymmetric R(22) rings.     

Coordinative NB bond formation and hydrogen‐bonded molecular ladders in 2,5‐bis[(N→B)‐(2‐aminoethoxy)phenylboryl]thiophene

The molecular structure of the title compound, C₂₀H₂₄B₂­N₂O₂S, is characterized by a twofold rotation axis passing through the S atom and the midpoint of the C—C single bond in the thio­phene ring. A coordinative NB bond is present in the boroxazolidine ring and a single N—H?O hydrogen bond [H?O 1.93 (3) Å, N?O 2.829 (3) Å and N—H?O 172 (2)°] links the mol­ecules into a molecular ladder.     

Dispiro[indene‐2,5′‐indeno[2,1‐a]fluorene‐6′,2′′‐indene]‐1,1′′,3,3′′,11′,12′‐hexaone: a three‐dimensional hydrogen‐bonded framework

The title compound, C₃₆H₁₆O₆, (I), was obtained as a new and unexpected oxidation product of 1,2′‐biindene‐1′,3,3′(2H)‐trione. The molecules of (I) exhibit approximate, but noncrystallographic, twofold rotation symmetry and the central ring of the fused pentacyclic portion is distinctly puckered, with a conformation intermediate between half‐chair and screw‐boat. Six independent C—H...O hydrogen bonds link the molecules into a three‐dimensional framework structure of considerable complexity. Comparisons are drawn between the crystal structure of (I) and those of several simpler analogues, which show wide variation in their patterns of supramolecular aggregation.     

Effect of pH on the construction of CdII coordination polymers involving the 1,1′‐[1,4‐phenylenebis(methylene)]bis(3,5‐dicarboxylatopyridinium) ligand

Changing the pH value of a reaction system can result in polymers with very different compositions and architectures. Two new coordination polymers based on 1,1′‐[1,4‐phenylenebis(methylene)]bis(3,5‐dicarboxylatopyridinium) (L^2?), namely catena‐poly[[[tetraaquacadmium(II)]‐μ₂‐1,1′‐[1,4‐phenylenebis(methylene)]bis(3,5‐dicarboxylatopyridinium)] 1.66‐hydrate], {[Cd(C₂₂H₁₄N₂O₈)(H₂O)₄]·1.66H₂O}_n, (I), and poly[{μ₆‐1,1′‐[1,4‐phenylenebis(methylene)]bis(3,5‐dicarboxylatopyridinium)}cadmium(II)], [Cd(C₂₂H₁₄N₂O₈)]_n, (II), have been prepared in the presence of NaOH or HNO₃ and structurally characterized by single‐crystal X‐ray diffraction. In polymer (I), each Cd^II ion is coordinated by two halves of independent L^2? ligands, forming a one‐dimensional chain structure. In the crystal, these chains are further connected through O—H…O hydrogen bonds, leading to a three‐dimensional hydrogen‐bonded network. In polymer (II), each hexadentate L^2? ligand coordinates to six Cd^II ions, resulting in a three‐dimensional network structure, in which all of the Cd^II ions and L^2? ligands are equivalent, respectively. The IR spectra, thermogravimetric analyses and fluorescence properties of both reported compounds were investigated.     

Tetrakis(μ‐2,3‐dimethoxybenzoato)bis[(2,2′‐bipyridine)(2,3‐dimethoxybenzoato)lanthanum(III)]

The title compound, tetrakis(μ‐2,3‐di­methoxy­benzoato)‐κ⁴O:O′;κ⁶O,O′:O′‐bis[(2,2′‐bi­pyridine‐N,N′)(2,3‐di­methoxy­benzoato‐O,O′)lanthanum(III)], [La₂(2,3‐DMOBA)₆(2,2′‐bpy)₂], where 2,3‐DMOBA is 2,3‐di­methoxy­benzoate (C₉H₉O₄) and 2,2′‐bpy is 2,2′‐bi­pyridine (C₁₀H₈N₂), is a dimer with a centre of inversion between the La atoms bridged by four carboxyl­ate ligands. The central La atom is ennea‐coordinated and has a distorted monocapped square‐antiprism geometry.