Calix[4]dithiacrown-6 and Its Platinum Complex

Ｃａｌｉｘ［４］ｄｉｔｈｉａｃｒｏｗｎ－６ａｎｄＩｔｓＰｌａｔｉｎｕｍＣｏｍｐｌｅｘＣＨＥＮＹｕａｎ－ｙｉｎ,ＺＨＯＵＹｉ－ｓｕｉ,ＴＯＮＧＸｉｎｇ－ｈｕａ,ＬＩＵＱｉａｎｇ,ＺＨＯＮＧＺｈｅｎ－Ｌｉｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ,Ｗ...     

Silica-supported Polysiloxanes with Dithiacrown Ether Groups and Their Platinum Complexes

The present paper represents the syntheses of polypropyloxymethyldithia 15-crown-5 and 18-crown-6 supported on silica and their platinum complexes. The platinum complexes are effective catalysts for the hydrosilylation of olefins with triethoxysilane. The influences of temperature, amount of platinum complexes used and the nature of olefins used on the catalytic activity of the complexes are also investigated in this paper.     

Preparation of Platinum Implanted Glassy Carbon Electrode and Electro-oxidation of Formic Acid and Formaldehyde

Electrocatalytic oxidation of small organic molecules has attracted considerable at-tentionin system of fuel celll-4. In this research field, Parsons4 pointed out that the electrodeswhich were prepared from non-noble substrates modified by excellent dispersal noblemetal particles and which still exhibited better catalytic activity should be studied. Ionimplantation is a technique with unique advantage and has been used in manyelectrochemical research fieldss'6. The present study is an at-tempt…     

In-situ FTIR Spectroelectrochemical and Electrochemical Studies of Ferrocene and Derivatives at a Platinum Electrode

Redox mechanism of ferrocene, acetylferrocene, ferrocenyl cinnamenyl ketone at a platinum electrode was studied with cyclic voltammetry (CV) and in-situ Fourier transform infrared (FTIR) spectroelectrochemistry. The IR bands in the range of 2000-1000cm^-1 attributed to the stretching and ring vibrations of these materials show the main spectral changes in the processes.     

Synthesis and Properties of Composite Polyaniline–Nafion Films on Platinum

Information on the synthesis of a polyaniline film on platinum covered with a Nafion film is obtained. The effect of electrochemical conditions on the synthesis is studied. The relationship between these conditions and properties of obtained composite polyaniline–Nafion films is revealed. It is established that on platinum covered with a Nafion film in certain electrochemical conditions in a polyaniline solution there occurs the formation of a composite polyaniline–Nafion film. The polyaniline in the film mainly retains its individual properties. It is demonstrated that the mechanism of the synthesis of polyaniline in the composite film substantially differs from that in the case of the formation of a film on platinum.     

Silica－supported Polysiloxane with Selenacrown Ether Moieties and Its Platinum Complex

Ｓｉｌｉｃａ－ｓｕｐｐｏｒｔｅｄＰｏｌｙｓｉｌｏｘａｎｅｗｉｔｈＳｅｌｅｎａｃｒｏｗｎＥｔｈｅｒＭｏｉｅｔｉｅｓａｎｄＩｔｓＰｌａｔｉｎｕｍＣｏｍｐｌｅｘＬＵＸｕｅ－ｒａｎ；ＺＨＡＮＧＬｉ－ｆｅｎｇ；ＷＡＮＧＺｈｅｎ－ｘｉａ；ＬＩＵＸｉｕ－ｆａｎｇａ...     

Electrochemical Hydrogenation of α-Arylvinylphosphonic Acids on Platinum and Palladium Modified with Adatoms

A general characteristic of cathodic reduction of -phenylvinylphosphonic acid and its methyl- and chloro-parasubstituted derivatives on Pt/Pt, Pd/Pt, and Pd/Pt modified with Cd and Cu adatoms, is given. At effective pressures of about 10³–10⁴ Pa the processes occur at high rates and at some potentials are limited by the reactant diffusion from the bulk solution. In the presence of Cd and Cu adatoms two reduction waves (presumably, single-electron) may be isolated, i.e. the hampering by adatoms is more pronounced for a second successive stage of the process. At low effective hydrogen pressures the hydrogenation rate is higher on Pd electrodes, which possess a larger sorption capacity. Potential intervals where the reduction of substituted reactants may be complicated by destruction, are found. It is shown that -phenylvinylphosphonic acid undergoes a complete reduction with a current efficiency of 100% in both hydrochloric- and sulfuric-acid solutions. Conditions where the reduction of -(4-chlorophenyl)vinylphosphonic acid proceeds largely without destruction are found. Prospects for use of electrochemical reduction as a preparative method of a selective production of -arylethylphosphonic acids are considered.     

Six-Nuclear Complexes of Platinum(II) and Palladium(II) with Mercamine and β-Mercaptoethanol

The platinum(II) and palladium(II) complexes [Pt₆(SCH₂CH₂NH₂)₈]Cl₄ and [Pd₆(SCH₂CH₂OH)₈ Cl₄· 5H₂O with mercamine and β-mercaptoethanol, respectively, were synthesized. It was found on the basis of the comparison of IR and X-ray electron spectra of the ligands and complexes, and also of the data of X-ray diffraction analysis that the bidentate coordination of ligands through sulfur and nitrogen atoms is realized in the platinum(II) complex. In the palladium(II) complex β-mercaptoethanol is coordinated in a mixed-mode type. In both complexes sulfur atoms of the ligands occupy a bridging position.     

Synthesis and Structural Elucidation of N,N ’-Ditosyl-1,11-diaza-4,8,14,18-tetraselena-cycloicosane and its Copper and Platinum Complexes

The reaction of 1,2-diselenacyclopentane with N,O,O-tri-(toluene-p-sulphonate)-diethanolamine afforded a new seleno-azacrown ether, i.e. N,N′-ditosyl-1,11-diaza-4,8,14,18-tetraselena cycloicosane (1), in 19% yield, which was comprehensively characterized by elemental analysis, UV–Vis, ¹H NMR and mass spectroscopy. The reaction of 1 with copper(II) perchlorate (Cu(ClO₄)₂) and platinum(IV) tetrachloride (PtCl₄) gave its corresponding copper (2) and platinum complexes (3), respectively. The crystallographic investigations showed that the disparity of metal ion led not only to the distinct crystal system and space group, i.e. monoclinic system (C2/c) for 2 and triclinic system (P-1) for 3, but also the different coordination modes of copper and platinum ions with 1, i.e. normal coordination mode for 2 and ring-contracted coordination mode for 3. Moreover, the metal ions in the crystals 2 and 3 were found in Cu(I) and Pt(II) forms, respectively, although Cu(II) and Pt(IV) were used at the initial stage of coordination reaction.     

Characterization and Purity Determination of Trans (±) 1,2-Diaminocyclohexane Platinum (Iv) Tetrachloride Using Liquid Chromatography With A Platinum Selective Detector

Abstract

An important aspect of drug development is the reliable determination of the purity of a bulk drug substance. In the case of Trans (±) 1,2-Diaminocvclohexane Platinum (IV) Tetrachloride, classical techniques such as differential scanning calorimetry and phase solubility analysis cannot be used because of the compound's poor tabulation of the fractions (percent) of platinum contained in each peak as measured with d.c. plasma and a corresponding response factor for the UV detector. the power of the d.c. plasma detector in producing unequivocal information on the platinum-containing species and its application in elucidating the data obtained with the UV detector is well demonstrated in this case.     

Platinum nanoparticle-catalyzed lucigenin–hydrazine chemiluminescence

It was found that lucigenin alkaline solution could react with hydrazine in the presence of Pt nanoparticles to generate strong chemiluminescence (CL) centered at 480 nm. In order to explore the CL mechanism, UV–visible spectra, X-ray photoelectron spectra studies before and after the CL reaction were carried out. The effects of O₂ and superoxide dismutase (SOD) on the CL reaction were examined. The catalytic effect of Pt NPs on the hydrazine–O₂ reaction was studied. A possible mechanism is proposed to be due to that Pt NPs catalyzed the reaction between hydrazine and the dissolved oxygen under alkaline conditions to yield hydroperoxide species and superoxide radical anion, which further oxidized lucigenin to produce CL emission. Moreover, the effects of some organic compounds containing hydroxyl (OH), carboxyl (COOH), carbonyl (CO), amino (NH₂), or sulfur groups on the lucigenin–hydrazine–Pt NPs CL system were tested. Thiol-containing compounds such as cysteine (Cys), glutathione (GSH), homocysteine (Hcy), and 6-mercaptopurine (6-MP) were observed to greatly enhance the CL intensity. It is suggested that the CL enhancement might be due to the fact that thiol-containing compounds could facilitate the electron transfer process under the catalysis of Pt nanoparticles and accelerate the generation of OH and O₂^? radicals, leading to the strong CL.     

Amperometric Determination of lndole-3-acetic Acid Based on Platinum Nanowires and Carbon Nanotubes

Platinum nanowire （PtNW） can be grown by electrodeposition in polycarbonate membrane, with the average diameter of the nanowires about 250 nm. The PtNW and multiwalled carbon nanotubes （CNT） are then dispersed into chitosan （CHIT） solution. The resulting PtNW-CNT-CHIT material brings new capabilities for electrochemical devices by using the synergistic action of the electrocatalytic activity of PtNW and CNT. By dropping the PtNW-CNT-CHIT film onto the glassy carbon （GO） electrode surface, and after evaporation an amperometric sensor for the determination of indole-3-acetic acid （IAA） was developed. The oxidation current of IAA increased significantly at the PtNW-CNT-CHIT film coated GC electrode, in contrast to that at the CNT-CHIT modified GC. The linear response of the sensor is from 50 ng/ml to 50 μg/ml with a detection limit of 25 ng/mL.     

Synthesis and Luminescent Properties of an Acetylide-Bridged Dinuclear Platinum(II) Terpyridyl Complex

Introduction Luminescent coordinatively unsaturated platinum(II) complexes are appealing from photochemical and pho-tophysical perspective.1,2 In particular, platinum(II) ter-pyridyl complexes have attracted considerable attention due to their rich spectroscopic2a-d and biological proper-ties.2a,e-g However, the development of the photochem-istry of these complexes is limited by their short-lived MLCT excited state in solution at room temperature. The lack of emission originates from low-l…     

Excitation-emission-lifetime analysis of multicomponent systems—III. Platinum,palladium and rhodium porphyrins

Excitation-emission-time matrices are obtained on five emitting systems containing platinum, palladium, and rhodium porphyrins. Two-dimensional principal component analysis provides initial guesses for the iterative least-squares refinement in three dimensions. Surprisingly good resolution is obtained in mixture A of two emitting species with spectral overlaps (0.560, 0.282, 0.997) in excitation, emission and time respectively. Excellent spectral resolution is obtained in system B of two emitting species with spectral overlaps (0.569, 0.135, 0.956). In system C, with three emitting species, the overlap between pairs of spectra was sufficiently low that the nine spectra (three species each in excitation, emission and time) are relatively well determined. In systems D and E, higher overlap between spectra produces mixing of the extracted spectra.     

Palladium(II) and Platinum(II) Complexes of N-Phenyl- and N-Ethyl-N′-pyrimidin-2-ylthiourea

Palladium(II) and platinum(II) complexes of N-ethyl-N′-pyrimidin-2-ylthiourea(HL¹) and N-phenyl-N′-pyrimidin-2-ylthiourea (HL²) have been prepared, and the complexes [M(HL)Cl₂], [Pt(L)₂], [Pd(HL¹)₂]Cl₂, and [Pd(L²)₂] (where M = Pd^II or Pt^II) were characterized. The spectroscopic data are consistent with coordination of thioureas as neutral or monoanionic ligands to Pd^II and Pt^II through S and a pyrimidine-N. The IR spectra show shifts of CS and pyrimidine ring stretch bands to lower and higher frequencies, respectively. The ¹H NMR spectra differentiate between H(4′) and H(6′) resonances and indicate downfield shifts for all protons of pyrimidine [H(4′), H(5′), and H(6′)], two resonances for two N?H protons for complexes containing the neutral ligand (HL), and only one N?H proton chemical shift for complexes containing the monoanion (L). ¹³C NMR chemical shifts of pyrimidine carbons are correlated with the type of bonding between Pd^II or Pt^II and pyrimidine-N. The magnetic susceptibilities suggest a diamagnetic planar structure for all complexes.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis and Luminescent Properties of an Acetylide-Bridged Dinuclear Platinum（Ⅱ） Terpyridyl Complex

An acetylide-bridged dinuclear platinum(Ⅱ) terpyridyl complex, [Pt(4‘-p-tolyl-terpy)-≡-phenyl-≡-(4‘-p-tolylterpy)Pt](ClO4)2 (1), has been successfully synthesized and its photophysical properties are reported.     

Formation and Oxidation of Hydrogen Molybdenum Bronze on Platinum Electrode in Sulfuric Acid Solution

Hydrogen molybdenum bronze (HxMoO3) can be electrodeposited on platinum and oxidized in two steps to the hydrogen molybdenum bronze with less amount of hydrogen HyMoO3 (y相似文献   

Platinum Nanoparticles Supported on Graphite Nanofibers Prepared by Microwave Irradiation and Its Electrocatalytic Activity

Platinum nanoparticles supported on graphite nanofibers (GNFs) were prepared by microwave assistant heating polyol process. TEM images showed that microwave prepared Pt nanoparticles supported on GNFs were small and uniform, and the average diameter was about 3.4 nm. Cyclic voltammetric test showed that Pt/GNFs exhibited very high electrocatalytic activity for methanol oxidation.     

Platinum–germanium ordering in UPtGe

The non-centrosymmetric structure of UPtGe was investigated by X-ray diffraction on both powders and single crystals: EuAuGe type, Imm2, a=432.86(5), b=718.81(8), c=751.66(9) pm, wR₂=0.0738 for 399 F² values and 22 variables. The platinum and germanium atoms form two-dimensional layers of puckered Pt₃Ge₃ hexagons with short PtGe intralayer distances of 252 and 253 pm. These condensed two-dimensionally infinite nets are interconnected to each other via weak PtPt contacts with bond distances of 300 pm. The two crystallographically independent uranium atoms are situated above and below the six-membered platinum–germanium rings. The U1 atoms have six closer germanium neighbors while the U2 atoms have six closer platinum neighbors. The group–subgroup relation with the KHg₂ type structure is presented.     

Amperometric Determination of Indole-3-acetic Acid Based on Platinum Nanowires and Carbon Nanotubes

Over the past few years, extensive research has been focused on the preparation, purification, and possible application of the CNT1-3. The unique electronic, chemical, and mechanical properties of CNT make it extremely attractive for electrochemical sensi…