Fast and direct screening of solid materials for their potential liberation of hydrophobic organic compounds using hot cell membrane inlet mass spectrometry

We demonstrate that solid materials can be screened directly and without any pretreatment for their potential liberation of chemicals into the surroundings using a hot (150-250 degrees C) sample cell membrane inlet mass spectrometer with electron ionization. Three very different types of solids were tested: polymers (in this context regarded as a solid), tea leaves and pesticide-contaminated soil. From the polymers phthalates and other additives were liberated; from the tea leaves flavor additives and caffeine were liberated; and from the contaminated soil degradation products of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) were liberated. In all cases we detected characteristic compounds directly from the untreated sample with an analytical turnover of 8-10 samples per hour. Improved selectivity of compounds penetrating the membrane was achieved either by operating the hot cell at different temperatures or by using variations in the time trend of individual ions following insertion of a piece of the solid material into the hot cell.     

Intrinsically Porous Polymer Protects Catalytic Gold Particles for Enzymeless Glucose Oxidation

The enzymeless glucose oxidation process readily occurs on nano‐gold electrocatalyst at pH 7, but it is highly susceptible to poisoning (competitive binding), for example from protein or chloride. Is it shown here that gold nanoparticle catalyst can be protected against poisoning by a polymer of intrinsic microporosity (PIM‐EA‐TB with BET surface area 1027 m² g^?1). This PIM material when protonated, achieves a triple catalyst protection effect by (i) size selective repulsion of larger protein molecules (albumins) and (ii) membrane ion selection effects, and (iii) membrane ion activity effects. PIM materials allow “environmental control” to be introduced in electrocatalytic processes.     

Novel and efficient multifunctional periodic mesoporous organosilica supported benzotriazolium ionic liquids for reusable synthesis of 2,4,5-trisubstituted imidazoles

A series of periodic mesoporous organosilica supported benzotriazolium ionic liquids were synthesized and tested as effective and practical heterogeneous catalysts in the condensation reaction of diphenylethanedione, aromatic aldehydes and ammonium acetate. The catalyst PMO@ILBF4(1.0) showed brilliant catalytic activity for the synthesis of 2,4,5-trisubstituted imidazoles with good to high yields. We also found that the catalytic activity could be significantly influenced by the loading levels and functional anions of the benzotriazolium-cation ionic liquid, probably due to an intensification of intramolecular synergistic effect. Furthermore, the multifunctional catalyst PMO@ILBF4(1.0) could be easily recovered by filtration and recycled for six times with no significant loss in activity, indicating its excellent stability and reusability. This method provides an efficient and environmentally-friendly procedure for the production of 2,4,5-trisubstituted imidazoles.     

Determination of phenols in waters by stir membrane liquid-liquid-liquid microextraction coupled to liquid chromatography with ultraviolet detection

A simple and rapid method for the determination of eleven phenols in water samples is presented. The target analytes are isolated by stir membrane liquid-liquid microextraction working under the three-phase mode. An alkaline aqueous solution is used as extractant phase while octanol is selected as supported liquid membrane solvent. The target analytes are separated and determined by liquid chromatography (LC) with ultraviolet detection (UV). All the variables involved in the extraction process have been studied in depth. Low detection limits (in the range from 82.1 ng/L for phenol to 452 ng/L for 2,4,5-trichlorophenol) were obtained. The repeatability, expressed as relative standard deviation (RSD), varied between 1.3% (for 4-nitrophenol) and 8.0% (for 4-chlorophenol). The enrichment factors were in the range from 168 (for 2,4,5-trichlorophenol) to 395 (for 3-chlorophenol). The proposed procedure was applied for the direct determination of the eleven phenols in some real water samples including river, well and tap waters. The accuracy was evaluated by means of a recovery study, the results being in the range of 87-120%.     

Novel and enantioselective syntheses of (R)- and (S)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid: a synthon for sitagliptin and its derivatives

A new synthetic strategy for (R)- and (S)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid, a building block in the preparation of sitagliptin and its derivatives, was developed. Pd(OAc)₂ catalyzed coupling of 2,4,5-trifluoro-1-iodobenzene with allyl alcohol gave 3-(2,4,5-trifluorophenyl)propanal in a yield of 95%. l-Proline catalyzed reaction of the 3-phenylpropanal (in only 1.2 molar equiv) with nitrosobenzene followed by reduction with NaBH₄ and Pd/C catalyzed hydrogenation gave (R)-3-(2,4,5-trifluorophenyl)propane-1,2-diol with >99% ee and 65% yield. Selective tosylation of primary hydroxyl group of the 1,2-propandiol unit followed by cyanide displacement afforded (R)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanenitrile (80%). The nitrile was converted to the title β-hydroxy acid under basic hydrolysis in a yield of 90%. Thus, (R)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid was prepared enantioselectively from the starting material in four steps and 45% overall yield. The reaction sequence was repeated with d-proline as the catalyst to give (S)-3-hydroxy-4-(2,4,5-trifluorophenyl)butanoic acid in 45% overall yield and >99% enantiomeric excess.     

Non-Fluorinated Polymer Composite Proton Exchange Membranes for Fuel Cell Applications – A Review

The critical component of a proton exchange membrane fuel cell (PEMFC) system is the proton exchange membrane (PEM). Perfluorosulfonic acid membranes such as Nafion are currently used for PEMFCs in industry, despite suffering from reduced proton conductivity due to dehydration at higher temperatures. However, operating at temperatures below 100 °C leads to cathode flooding, catalyst poisoning by CO, and complex system design with higher cost. Research has concentrated on the membrane material and on preparation methods to achieve high proton conductivity, thermal, mechanical and chemical stability, low fuel crossover and lower cost at high temperatures. Non-fluorinated polymers are a promising alternative. However, improving the efficiency at higher temperatures has necessitated modifications and the inclusion of inorganic materials in a polymer matrix to form a composite membrane can be an approach to reach the target performance, while still reducing costs. This review focuses on recent research in composite PEMs based on non-fluorinated polymers. Various inorganic fillers incorporated in the PEM structure are reviewed in terms of their properties and the effect on PEM fuel cell performance. The most reliable polymers and fillers with potential for high temperature proton exchange membranes (HTPEMs) are also discussed.     

Electrochemical formation and clevage of bis-imidazolyls

Bis-(2,4,5-triphenylimidazolyls) result from the dimerization of 2,4,5-triphenylimidazolyls and from the nucleophilic attack of 2,4,5-triphenylimidazole anions upon 2,4,5-triphenylimidazolylium cations. The isomeric bis-imidazolyls consist of imidazole and isoimidazole systems. Imidazoles undergo only anodic oxidation, isoimidazoles only cathodic reduction. Therefore the bis-imidazolyls may be analyzed from their electrochemical behaviour. Bis-(2,4,5-triphenylimidazolyl)-1,2′ and bis-(2,4,5-triphenylimidazolyl)-1,4′ undergo reductive bond cleavage in an ē.c?.ē. mechanism from which 2,4,5-triphenyl-imidazole anions result. The electrochemical properties of one of the bis-imidazolyls agree with that of 1,4,5-triphenyl-2-(2,4,5-triphenylisoimidazolyl-4)-imidazole and not with that of bis-(2,4,5-triphenylimidazolyl)-2,4′ as reported in literature.     

Sensitization of photopolymer materials by halogenated derivatives of xanthene and thioxanthene dyes in the pulsed recording mode

A holographic photopolymer material based on a poly(vinyl alcohol) matrix, the acrylamide monomer, and triethanolamine as an initiator was sensitized by the xanthene dyes erythrosine; thioeryth-rosine; eosin; thioeosin; thiofluorescein, 4-iodo-, 4,5-diiodo-, and 2,4,5-triiodofluorescein; and 4-bromo-, 4,5-dibromo-, and 2,4,5-tribromothiofluorescein. The quantum yields of photobleaching of these dyes in the polymer matrix were determined. Transmission phase gratings were recorded in the pulse mode (λ = 532 nm, t _p = 10 ns). The levels of the diffraction efficiency of holograms were measured, and the 4-bromo- or 4,5-dibromothiofluorescein-triethanolamine system was found to be the most effective photoinitiator.     

One-pot synthesis of new 2,4,5-trisubstituted 1,3-thiazoles and 1,3-selenazoles

In this work, we describe the synthesis of new 2,4,5-trisubstituted-1,3-thiazoles and 1,3-selenazole achieved by an easy one-pot four-step procedure. Expected compounds were obtained in good yield from dimethyl cyanodithioimidocarbonate, which was the common starting material for the preparation of all 1,3-thiazoles and 1,3-selenazoles. Chemical diversity was introduced on thiazole and selenazole rings by varying the amines and the activated halides used.     

A Method for Determination of Low Levels of Exposure to 2,4-D and 2,4,5-T

A method has been developed for the determination of trace quantities of 2,4-dichloro-phenoxyacetic acid (2,4-D), 2,4,5-trichlorophenoxyacetic acid (2,4,5-T), 2,4-dichlorophenol (2,4-DCP), and 2,4,5-trichlorophenol (2,4,5-TCP) in human and rat urine. The method involves acid hydrolysis of the phenolic conjugates, extraction of the free phenols and acids, ethylation with diazoethane, silica-gel column chromatography clean-up of the derivatized urine extract, and gas chromatographic determination using the electron-capture detector. The average recoveries of 2,4-D, 2,4,5-T, 2,4-DCP, and 2,4,5-TCP from rat urine spiked with known amounts of the herbicides and their phenols were 94%, 98%, 92%, and 90%, respectively. The limits of detection for 2,4-D, 2,4,5-T, DCP, and TCP in rat urine were: 0.05, 0.01, 0.10, and 0.01 ppm, respectively. The method was used to analyze urine of rats given various levels of 2,4-D and 2,4,5-T by gavage. Results showed that levels of exposure of 3.75 mcg/kg for 2,4-D and 5.0 mcg/kg for 2,4,5-T in rats can be detected in urine within 24 hr from exposure. Urine samples from occupationally exposed people were analyzed and found to contain 0.2 to 1.0 ppm 2,4-D and 0.05 to 3.6 ppm 2,4,5-T.     

A peroxide-bridged imidazole dimer formed from a photochromic naphthalene-bridged imidazole dimer

2,4,5-Triphenylimidazole (lophine) is known as the first chemiluminescence substrate, and its oxidized derivative, the 2,4,5-triphenylimidazolyl radical, corresponds to the coloured species in the photochromic reaction of hexaarylbiimidazole (HABI). We report the first direct observation of the O(2) adduct of the imidazolyl radical that forms the end-on peroxide-bridged imidazole dimer. The ring-opening reaction of the peroxide-bridged imidazole dimer leading to the formation of an N-benzoylbenzamidine derivative supports the presence of the 4,5-epidioxide of lophine as a reaction intermediate of its chemiluminescence.     

A clear,amine-containing poly(vinyl chloride) membrane for in situ optical detection of 2,4,6-trinitrotoluene

A membrane has been developed for the direct determination of 2,4,6-trinitrotoluene (TNT) in natural waters at levels as low as 10 ng ml^?1. A typical membrane is prepared by dissolving the following in tetrahydrofuran: 0.5 g of poly(vinyl chloride) (PVC), 0.2 ml of dioctyl phthalate to serve as a plasticizer and 0.12 ml of Jeffamine T403, a polyoxyethyleneamine which reacts with TNT to produce a colored product. The membrane is formed by casting the solution into a glass Petri dish with a diameter of 8 cm and allowing the solvent to evaporate slowly. Trace amounts of 1,3,5-trinitrobenzene (TNB), 2,4,5-trinitrotoluene (2,4,5-TNT) and N-picryl-N-methylnitramine (tetryl) also react with the membrane to produce a reddish brown color, but their visible absorption spectra differ from that of TNT. The membranes remain clear indefinitely in water. After storage for 80 days in air in a sealed container, over 80% of the amine remains in the membranes. After exposure to water for 10 days, over 40% of the amine remains in the membranes, which continue to respond to TNT. The membrane can be used to determine TNT in untreated water samples of pH 6–9. Recoveries of 0.1–4.0 mg l^?1 of TNT from spiked groundwater ranged from 95 to 105%. Results by direct analysis of turbid water samples agreed with those obtained by high-performance liquid chromatography.     

Determination of the Pesticides MCPA, 2,4,5-T,and 2,4,5-T-Isopropyl Ester by Low Temperature Phosphorimetry

Abstract

Sensitive low temperature phosphorimetric methods for the determination of the pesticides MCPA, 2,4,5-T, and 2,4,5-T-isopropyl ester in EPA solvent have been developed. The minimum detectable amounts are 0.1 p.p.m. for both 2,4,5-T formulations and 0.2 p.p.m. for MCPA. The ranges in linearity of the analytical calibration graphs are 0.2–60, 0.5–60, and 0.5–50 p.p.m. for 2,4,5-T, 2,4,5-T-isopropyl ester, and MCPA respectively. The procedure for 2,4,5-T has been applied to the analysis of a solid commercial formulation.     

An expedient synthesis of 2,4,5-trisubstituted 1,4-pentadienes from Baylis-Hillman adducts via the Pd-catalyzed decarboxylation-elimination protocol

We disclosed an efficient synthetic method of 2,4,5-trisubstituted 1,4-pentadienes from Baylis-Hillman adducts via the Pd-catalyzed decarboxylation-elimination protocol as the key step.     

Standard molar enthalpies and entropies of vaporization for twolow-melting trichlorophenoxy herbicides

The standard sublimation enthalpies of (2,4,5-trichlorophenoxy)acetonitrile and (2,4,5-trichlorophenoxy)aniline were determined by isothermal thermogravimetry using the Langmuir equation and by non-isothermal differential scanning calorimetry for comparison. The used procedure was previously tested using three reference compounds: benzoic acid, succinic acid and salicylic acid. The results compared to those reported in literature show an excellent agreement for two of the three compounds while the third agrees quite well. For (2,4,5-trichlorophenoxy)acetonitrile and (2,4,5-trichlorophenoxy)aniline, the extrapolation of data at 298.15 K were obtained, respectively: Δ_subH°(298 K)={(106±4) and (101±4)} kJ mol^–1. From Clausius Clapeyron equation obtained after the determination of the vaporization constant α′, the following standard sublimation entropies for (2,4,5-trichlorophenoxy)acetonitrile and (2,4,5-trichlorophenoxy)aniline equal to Δ_subS°(298 K)=(251 and 237) J K^–1 mol^–1, respectively, were derived, with an error of ±4 J K^–1 mol^–1 equal for the studied herbicides.     

Assessment of enzyme-linked immunosorbent assay for the determination of 2,4,5-TP in water and soil

A highly sensitive and specific indirect enzyme-linked immunosorbent assay is described for Silvex, 2-(2,4,5 trichlorophenoxy)propionic acid, (2,4,5-TP). One specific feature of the immunoassay is the use of simple chemical activation of chlorophenoxy acids to prepare both the immunizing and coating conjugates. The assay is based on the use of polyclonal antibodies raised against 2,4,5-TP, and a peroxidase-labeled secondary antibody for colorimetric detection. The effect of different chemical conditions (pH, and salt and detergent concentration) on immunoassay performance has been studied. Under the best conditions the least detectable dose and the sensitivity (IC(50)) for 2,4,5-TP were 0.05 micro g L(-1) and 0.80 micro g L(-1), respectively. The optimized immunoassay was also highly specific, showing little (6.9% for 2,4,5-T) or no cross-reactivity with other similar herbicides. The assay was used to determine 2,4,5-TP in water and soils. The excellent recoveries obtained (mean values ranging between 89% and 104%) make this immunoassay a suitable screening method for either environmental monitoring or laboratory quantification of 2,4,5-TP.     

Hollow fiber ultrafiltration: The concept of partial backwashing

In dead-end hollow fiber filtration with humic acid solutions, we observed that the humic material accumulates in the final part of the fiber. We proved the hypothesis that backwashing of the last part of the fiber is sufficient to operate the filtration process in a sustainable manner. This strategy works very well for feed solutions that result in either local accumulation of the material at the end of the fiber, or that form a well-defined concentration polarization layer that does not lead to deposition. When deposition throughout the whole module occurs, the proposed cleaning strategy is unsuccessful. This overall deposition occurs when a force balance over the particle, results in net transport to the membrane surface over the entire length of the module. We simulated such conditions by the addition of calcium to the feed solutions. The latter results in large aggregates carried towards the whole membrane area by convective water flow, and an increased interaction between the aggregates and the membrane.     

Preliminary Screening Method for Dioxin Contamination Using Polarization Fluoroimmunoassay for Chlorinated Phenoxyacid Pesticides

Polarization fluoroimmunoassays (PFIA) were developed for the chlorinated pesticides 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). In order to optimize the PFIA procedures, a number of fluorescein-labeled 2,4-D and 2,4,5-T derivatives were synthesized and the influence of their structures on PFIA characteristics was studied. Also, several antisera were tested in developing the PFIA for 2,4,5-T. The assays were adapted for use with the Abbott TDx Analyzer and could be run in automatic mode by the adaptation of existing software and protocols. Dynamic ranges for 2,4-D and 2,4,5-T were 0.2-200 ng mL^–1 and 30-10 000 ng mL^–1, respectively. Total time for the automated assay of 20 samples was about 22 min. PFIA provides a suitable means for screening of a large number of samples. The rapid determination of 2,4,5-T, which is one of the precursors of polychlorinated dibenzo-p-dioxins, one of the most toxic groups of pollutants, may potentially be used to provide preliminary evidence of dioxin contamination.     

Development of a dipstick immunoassay for quantitative determination of 2,4-dichlorophenoxyacetic acid in water, fruit and urine samples

A sensitive dipstick assay for 2,4-dichlorophenoxyacetic acid (2,4-D) detection was developed. The assay was based on the competitive reaction of 2,4-D and enzyme tracer with monoclonal antibodies immobilised on an Ultrabind^? membrane. The binding of enzyme tracer on the test strip was determined by a simple, portable reflectometer as remission at 657 nm. Using this technique, 2,4-D could be detected in a concentration range of 0.5 μg/L to 100 μg/L. The center point of the 2,4-D test was found at a concentration of 6 μg/L. Cross-reactivity with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) as determined by this dipstick assay was 2.5% and 3% by standard ELISA technique using microtiter plates. The assay was applied in the detection of 2,4-D in real water samples, and sensitivity was comparable to spiked water samples. If combined with an effective extraction procedure that results in recovery rates of 90%, the dipstick assay can be used to monitor human exposure to 2,4-D from contamination in water, from oranges and in testing urine samples. Received: 2 September 1998 / Revised: 29 January 1999 / Accepted: 31 January 1999