Molecular structure, vibrational spectroscopic, first hyperpolarizability, NBO and HOMO, LUMO studies of P-Iodobenzene sulfonyl chloride

In this work, the experimental and theoretical vibrational spectra of P-Iodobenzene sulfonyl chloride (P-IBSC) were studied. P-IBSC and its derivatives present in many biologically active compounds. Because of their spectroscopic properties and chemical significance in particular, sulfonyl chloride and its derivatives have been studied extensively by spectroscopic (FTIR and FT-Raman spectra) and theoretical methods. The infrared spectra of these compounds were recorded in condensed states, while the Raman spectra were measured without polarization using both parallel and perpendicular polarizations of scattered light. The molecular geometry, highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO), first order hyperpolarizability and thermodynamic properties of P-IBSC have been computed with the help of density functional theory (B3LYP) and ab initio (HF) methods with the LanL2DZ basis set. The HOMO and LUMO energy gap explains the charge transfer interactions taking place within the molecule. NBO study explains charge delocalization of the molecule. The contributions of the different modes to each wave number were determined using potential energy distributions (PEDs). The experimental and calculated results were consistent with each other.     

Vibrational spectroscopic, first-order hyperpolarizability and HOMO, LUMO studies of 1,2-dichloro-4-nitrobenzene based on Hartree-Fock and DFT calculations

The Fourier-transform infrared spectrum of 1,2-dichloro-4-nitrobenzene (DCNB) was recorded in the region 4000-400cm(-1). The Fourier-transform Raman spectrum of DCNB was also recorded in the region 3500-50cm(-1). Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of DCNB were carried out by ab initio HF and density functional theory (DFT/B3LYP) method with 6-31+G(d,p) basis set. The difference between the observed and scaled wavenumber values of most of the fundamentals is very small. The values of the total dipole moment (μ) and the first-order hyperpolarizability (β) of the investigated compound were computed using ab initio quantum mechanical calculations. The calculated results also show that the DCNB might have microscopic nonlinear optical (NLO) behavior with non-zero values. A detailed interpretation of the infrared and Raman spectra of DCNB is also reported based on total energy distribution (TED). The calculated HOMO and LUMO energies shows that charge transfer occur within the molecule. The theoretical FT-IR and FT-Raman spectra for the title compound have also been constructed.     

Molecular structure,vibrational spectra,NBO analysis,first hyperpolarizability,and HOMO,LUMO studies of mesityl chloride by density functional methods

The FT-IR and FT-Raman vibrational spectra of mesityl chloride (2,4,6-trimethylbenzyl chloride) were recorded. The optimized geometry and wavenumbers in the ground state were calculated using density functional (B3LYP, and B3PW91) methods with standard 6-311G(d,p) basis set. The computed B3PW91/6-311G(d,p) results show the best agreement with the experimental values over the other methods. Natural bond orbital analysis of mesityl chloride is also carried out, which confirms the occurrence of strong intermolecular bonding, stability of the molecule arising from hyperconjugative interactions, and charge delocalization. The electric dipole moment (μ), polarizability (α), and first hyperpolarizability (β₀) which results also show that the mesityl chloride might have microscopic non-linear optical behavior with non-zero values. The calculated HOMO and LUMO energies show that charge transfer occur in the molecule. The results of the calculations were applied to simulated spectra of the title compound, which show excellent agreement with observed spectra.     

Vibrational spectroscopic (FT-IR and FT-Raman), first-order hyperpolarizablity, HOMO, LUMO, NBO, Mulliken charges and structure determination of 2-bromo-4-chlorotoluene

The FT-IR and FT-Raman spectra of 2-bromo-4-chlorotoluene (2B4CT) molecule have been recorded in the region 4000-400 cm(-1) and 3500-50 cm(-1), respectively. Optimized geometrical structures, harmonic vibrational frequencies, intensities, reduced mass, force constants and depolarization ratio have been computed by the B3 based (B3LYP) density functional methods using 6-31+G(d,p) and 6-311++G(d,p) basis sets. The observed FT-IR and FT-Raman vibrational frequencies are analysed and compared with theoretically predicted vibrational frequencies. The geometries and normal modes of vibration obtained from DFT method are in good agreement with the experimental data. The Mulliken charges, the natural bonding orbital (NBO) analysis, the values of electric dipole moment (μ) and the first-order hyperpolarizability (β) of the investigated molecule were computed using DFT calculations. The calculated HOMO and LUMO energies show that charge transfer occurs within molecule. The influences of bromine atom, chlorine atom and methyl group on the geometry of benzene and its normal modes of vibrations have also been discussed.     

Molecular structure, vibrational spectra and HOMO, LUMO analysis of yohimbine hydrochloride by density functional theory and ab initio Hartree-Fock calculations

Yohimbine hydrochloride (YHCl) is an aphrodisiac and promoted for erectile dysfunction, weight loss and depression. The optimized geometry, total energy, potential energy surface and vibrational wavenumbers of yohimbine hydrochloride have been determined using ab initio, Hartree–Fock (HF) and density functional theory (DFT/B3LYP) method with 6-311++G(d,p) basis set. A complete vibrational assignment is provided for the observed Raman and IR spectra of YHCl. The UV absorption spectrum was examined in ethanol solvent and compared with the calculated one in gas phase as well as in solvent environment (polarizable continuum model, PCM) using TD-DFT/6-31G basis set. These methods are proposed as a tool to be applied in the structural characterization of YHCl. The calculated highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) with frontier orbital gap are presented.     

Molecular structure, spectroscopic studies and first-order molecular hyperpolarizabilities of p-amino acetanilide

The infrared absorption, Raman spectra and SERS spectra of p-amino acetanilide have been analyzed with the aid of density functional theory calculations at B3LYP/6-311G(d,p) level. The electric dipole moment (mu) and the first hyperpolarizability (beta) values of the investigated molecule have been computed using ab initio quantum mechanical calculations. The calculation results also show that the synthesized molecule might have microscopic nonlinear optical (NLO) behavior with non-zero values. Computed geometries reveal that the PAA molecule is planar, while secondary amide group is twisted with respect to the phenyl ring is found, upon hydrogen bonding. The hyperconjugation of the C=O group with adjacent C-C bond and donor-acceptor interaction associated with the secondary amide have been investigated using computed geometry. The carbonyl stretching band position is found to be influenced by the tendency of phenyl ring to withdraw nitrogen lone pair, intermolecular hydrogen bonding, conjugation and hyperconjugation. The existence of intramolecular C=O...H hydrogen bonded have been investigated by means of the natural bonding orbital (NBO) analysis. The influence of the decrease of N-H and C=O bond orders and increase of C-N bond orders due to donor-acceptor interaction has been identified in the vibrational spectra. The SERS spectral analysis reveals that the large enhancement of in-plane bending, out of plane bending and ring breathing modes in the surface-enhanced Raman scattering spectrum indicates that the molecule is adsorbed on the silver surface in a 'atleast vertical' configuration, with the ring perpendicular to the silver surface.     

Molecular structure, spectroscopic studies and first-order molecular hyperpolarizabilities of ferulic acid by density functional study

Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of ferulic acid (FA) (4-hydroxy-3-methoxycinnamic acid) were carried out by using density functional (DFT/B3LYP/BLYP) method with 6-31G(d,p) as basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with single crystal XRD data. The vibrational spectral data obtained from solid phase FT-IR and FT-Raman spectra are assigned based on the results of the theoretical calculations. The observed spectra are found to be in good agreement with calculated values. The electric dipole moment (μ) and the first hyperpolarizability (β) values of the investigated molecule have been computed using ab initio quantum mechanical calculations. The calculation results also show that the FA molecule might have microscopic nonlinear optical (NLO) behavior with non-zero values. A detailed interpretation of the infrared and Raman spectra of FA was also reported. The energy and oscillator strength calculated by time-dependent density functional theory (TD-DFT) results complements with the experimental findings. The calculated HOMO and LUMO energies shows that charge transfer occur within the molecule. The theoretical FT-IR and FT-Raman spectra for the title molecule have been constructed.     

Molecular structure, vibrational spectroscopic, first order hyperpolarizability and HOMO-LUMO studies of 7-amino-8-oxo-3-vinyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid

The FT-IR and FT-Raman spectra of 7-amino-8-oxo-3-vinyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (7AVCA) were recorded in the region 4000-400 cm(-1) and 3500-10 cm(-1), respectively. Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers were carried out by ab initio HF and density functional theoretical methods invoking 6-311G(d,p) basis set. The differences between the observed and scaled wavenumber values of most of the fundamentals are very small. The electric dipole moment (μ) and the first order hyperpolarizability (β0) values have been computed quantum mechanically. The calculated results show that 7AVCA may have microscopic nonlinear optical (NLO) behavior with non-zero values. A detailed interpretation of the FT-IR and FT-Raman spectra of 7AVCA is reported. The theoretical IR and Raman spectra of 7AVCA have also been constructed. The calculated HOMO and LUMO energies show that the charge transfer occurs within the molecule.     

The spectroscopic (FT-IR, FT-Raman), NCA, first order hyperpolarizability, NBO analysis, HOMO and LUMO analysis of L-cysteine by ab inito HF and density functional method

In this work, we report a combined experimental and theoretical study on molecular structure (monomer, dimer), vibrational spectra, and Natural Bond Orbital (NBO) analysis of non-ionized L-cysteine (LCY). The FT-IR solid phase (4000-400 cm(-1)) and FT-Raman spectra (3500-50 cm(-1)) of LCY was recorded at room temperature. The molecular geometry, harmonic and anharmonic vibrational frequencies and bonding features of LCY in the ground state have been calculated by using the density functional method (B3LYP) with 6-311G(d,p) as basis set. The assignments of the vibrational spectra have been carried out with the help of normal co-ordinate analysis (NCA) following the Scaled Quantum Mechanical Force Field (SQMFF) methodology. The first order hyperpolarizability (β(0)) of this novel molecular system and related properties (β, α(0) and Δα) of LCY are calculated using HF/6-311G(d,p) method on the finite-field approach. Stability of the molecule has been analyzed using NBO analysis. The calculated first hyperpolarizability shows that the molecule is an attractive molecule for future applications in non-linear optics. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. Finally the calculations results were applied to stimulate infrared and Raman spectra of the title compound which show good agreement with observed spectra.     

Vibrational spectroscopic (FTIR and FT Raman) studies, first order hyperpolarizabilities and HOMO, LUMO analysis of p-toluenesulfonyl isocyanate using ab initio HF and DFT methods

The Fourier transform infrared (FTIR) and FT Raman spectra of p-toluenesulfonyl isocyanate (p-tosyl isocyanate) have been measured. The molecular geometry, vibrational frequencies, infrared intensities, Raman activities and atomic charges have been calculated by using ab initio HF and density functional theory calculation (B3LYP) with 6-311+G(d,p) basis set. Complete vibrational assignment and analysis of the fundamental modes of the compound were carried out using the observed FTIR and FT Raman data. The thermodynamic functions of the title compound were also performed with the aid of HF/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory. Simulated FTIR and FT Raman spectra for p-tosyl isocyanate showed good agreement with the observed spectra. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. The dipole moment (μ), polarizability (α) and the hyperpolarizability (β) values of the investigated molecule have been computed using HF and B3LYP methods.     

DFT Study of the Molecular Structure,Conformational Preference,HOMO, LUMO,and Vibrational Analysis of 2-, and 3-Furoyl Chloride

Molecular structure, conformational stability and vibrational wave numbers for the rotational isomers of 2-furoyl chloride and 3-furoyl chloride have been computed using the B3LYP method with the 6-311++G(d,p) basis set. From computations, 2-furoyl chloride was predicated to exist predominantly in cis conformation with cis–trans rotational barrier 40.40 kJ·mol^?1, and 3-furoyl chloride was predicated to exist predominantly in the trans conformation with cis–trans rotational barrier 30.17 kJ·mol^?1. The effects of solvents on the conformational stability of all the molecules in nine different solvents (heptane, chloroform, tetrahydrofuran, dichloroethane, acetone, ethanol, methanol, dimethylsulfoxide and water) were investigated. The integral equation formalism of the polarizable continuum model was used for all solution phase computations. The vibrational wave numbers and the corresponding vibrational assignments of the molecules in C₁ symmetry were examined and the simulated infrared spectra of the molecules are reported. The geometrical parameters, highest occupied and lowest unoccupied molecular orbitals, Infrared intensities, and molecular electrostatic potentials results are reported.     

Hyper-Rayleigh scattering studies of first-order hyperpolarizability of squarylium dye in solution

We have synthesized a squarylium dye based on 2,6-di-tert-butylpyrylium (full name given in the text). Its nonlinear optical properties was detected by the hyper-Rayleigh light scattering technique in a chloroform solution, although this type of chromophore has a symmetrical structure and a negligible permanent dipole moment. The internal reference method was employed to determine the first hyperpolarizability β value of the chromophore and further discussion is provided.     

Polarizability and first-order hyperpolarizability of cyclic imides

Dipole moment, polarizability, and first-order hyperpolarizability of cyclic imides (maleimide, succinimide, phthalimide and some of their derivatives) have been investigated using ab initio and density functional theory calculations. It is found that 4,5-dichloro-, and 3,4,5,6-tetrachlorophthalimide have highest mean polarizabilities and total hyperpolarizabilities among the studied molecules. Furthermore, polarized continuum model has been employed to investigate solvent effects on the nonlinear optical (NLO) properties of succinimide; results indicate that solvent polarity has considerable influence on the NLO response of the molecules.     

Molecular structure of bismuth trichloride from combined electron diffraction and vibrational spectroscopic study

The results of an electron diffraction reanalysis, augmented with a combined electron diffraction and vibrational spectroscopic elucidation, of the molecular structure of BiCl₃ are reported. The principal parameters arer _g (Bi-Cl)=2.424±0.005 å (r =2.417±0.005 å) and <Cl-Bi-Cl=97.5±0.2. They are in excellent agreement with previous electron diffraction analysis [1], utilizing a more limited data range from the same experiment. They are also fully consistent with the expected trends of geometrical variation in the Group V trihalide series. The force fields of BiCl₃, determined by normal coordinate analysis and by combined analysis, agree within experimental error.     

FTIR and FT-Raman spectra, molecular geometry, vibrational assignments, first-order hyperpolarizability, ab initio and DFT calculations for 3,4-dimethoxybenzonitrile

Quantum chemical calculations of energies, geometrical structure and vibrational wave numbers of 3,4-dimethoxybenzonitrile (DMBN) were carried out by the ab initio Hartree-Fock (HF) and density functional theory (DFT) with complete relaxation in the potential energy surface using 6-311++G(d,p) basis set. The computed values of frequencies are scaled using a suitable scale factor to yield good coherence with the observed values. Making use of the recorded data, the complete vibrational assignments are made and analysis of the observed fundamental bands of molecule is carried out. The geometries and normal modes of vibrations obtained from ab initio HF and B3LYP calculations are in good agreement with the experimentally observed data. The electric dipole moment (μ) and the first hyperpolarizability (β) values of the investigated molecule have been computed using ab initio quantum mechanical calculations. The calculated HOMO and LUMO energies show that charge transfer occur within the molecule. The theoretical FTIR and FT-Raman spectra for the title molecule have been constructed.     

Molecular structure, vibrational spectroscopic (FT-IR, FT-Raman), UV and NBO analysis of 2-chlorobenzonitrile by density functional method

In this work, we will report a combined experimental and theoretical study on molecular structure, vibrational spectra, NBO and UV spectral analysis of 2-chlorobenzonitrile (2-ClBN). The FT-IR solid phase (4000-400 cm(-1)), and FT-Raman spectra (3500-50 cm(-1)) of 2-ClBN was recorded. The molecular geometry, harmonic vibrational frequencies and bonding features of 2-ClBN in the ground state have been calculated by using the density functional methods (BLYP, B3LYP) with 6-31G(d,p) as basis set. The assignments of the vibrational spectra have been carried out with the help of normal co-ordinate analysis (NCA) following the Scaled Quantum Mechanical Force Field Methodology (SQMFF). Stability of the molecule arising from hyper conjugative interactions, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The results show that charge in electron density (ED) in the σ* and π* anti bonding orbitals and E2 energies confirms the occurrence of ICT (Intra molecular Charge Transfer) within the molecule. The UV spectrum was measured in ethanol solution. The energy and oscillator strength calculated by Time-Dependent Density Functional Theory (TD-DFT) results complements with the experimental findings. The calculated HOMO and LUMO energies also confirm that charge transfer occurs within the molecule. Finally calculated results were applied to simulated Infrared and Raman spectra of the title compound which show good agreement with observed spectra.     

A simple model for the calculation of HOMO and LUMO energy levels of benzocatafusenes

A simple model for the calculation of HOMO and LUMO energy levels of benzocatafusenes (i.e., molecules that are only constituted by mutually condensed benzene rings and without interior carbon atoms, which belong to three benzene rings) is presented. Using semiempirical AM1 method, 615 benzocatafusenes were studied (29 normal and 586 branched). The relation between energy and molecular structure was coded by the three Hückel parameters: Coulomb integral, bond integral, and secular x eigenvalue. Analytical functions for HOMO and LUMO energy levels in terms of x parameter were obtained for normal benzocatafusenes, and energies for branched benzocatafusenes were satisfactorily modelled by the introduction of a simple correction function into the analytical functions describing normal benzocatafusenes. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Experimental (FT-IR, FT-Raman) and theoretical (HF and DFT) investigation and HOMO and LUMO analysis on the structure of p-fluoronitrobenzene

FT-IR and FT-Raman spectra of p-fluoronitrobenzene (FNO(2)C(6)H(4)) have been recorded in the region 4000-100 cm(-1). In this work, the experimental and theoretical spectra of p-fluoronitrobenzene (p-FNBz) are studied. The molecular geometry and vibrational frequencies are calculated in the ground state of molecule using ab initio Hartree-Fock (HF) and DFT (B3LYP and LSDA) methods with 6-31++G(d,p) and 6-311++G(d,p) basis sets. The computed values of frequencies are scaled to yield good coherence with observed values by using suitable factor. The complete assignments are performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The observed and calculated frequencies are found to be in very good agreement. The alteration of vibration bands due to the substitutions at the first and fourth position of the skeletal ring is also investigated from their characteristic region of linked spectrum. A study on the electronic properties, such as absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies, are performed by time dependent DFT (TD-DFT) approach. The electronic structure and the assignment of the absorption bands in the electronic spectra of steady compounds are discussed. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. The thermodynamic properties of the title compound at different temperatures have been calculated in gas phase, revealing the correlations between standard heat capacities (C) standard entropies (S), standard enthalpy changes (H) and temperatures.     

Effective tuning of HOMO and LUMO energy levels by p-n diblock and triblock oligomer approaches

A novel series of oligomers consisting of thiophene as a p-type unit and oxadiazole as an n-type unit were separately synthesized. On the basis of the characterization of photophysical and electrochemical properties, the structure-property relationships of the oligomers were investigated. Cyclic voltammogram studies showed that changing the number of thiophene and oxadiazole units could effectively modulate the electronic properties of the p-n diblock and triblock oligomers. The effect of molecular regiochemistry on electronic properties is also investigated. The observed electronic properties were consistent with theoretical calculations. These systems serve as excellent examples, demonstrating the band gap control principle in the p-n heterostructure oligomers.