Design of photonic crystal power beam splitters via corrugated and gratinglike surfaces

In this work, we use the finite-difference time-domain method in conjunction with a genetic algorithm to design photonic crystal power beam splitters based upon a typical planar photonic crystal waveguide with corrugated surfaces or gratinglike surfaces covered behind the termination. Considering a power detector placed at different locations in the output field, we have obtained several beam splitters designs with different splitting angles. These beam splitters have high splitting efficiency and power intensity in the propagation direction.     

红外探测装置中光谱分光镜的设计与制备

在红外探测装置中,光谱分光镜是用来把3 μm～5 μm和8 μm～12 μm 2个波段的光谱分开的零件.介绍了一种在通用镀膜机上制备光谱分光镜的新工艺.在该膜系的设计过程中,把Willey公式引入到对其平均透过率最高值进行估算的过程中,同时针对国产镀膜机控制精度不高的特点,尽量使用规整膜层进行设计.为了进一步提高8 μm～12 μm波段的透过率,在膜系的最外侧引进了一层自行配制的低折射率氟化物材料,制备出了符合技术指标的红外光谱分光镜.     

13.9 nm马赫贞德干涉仪用软X射线分束镜研究

介绍了13.9 nm马赫贞德干涉仪用软X射线分束镜的设计、制备与性能检测。基于分束镜反射率和透过率乘积最大的评价标准,设计了13.9 nm软X射线激光干涉实验用多层膜分束镜。采用磁控溅射方法在有效面积为10 mm×10 mm、厚度为100 nm的Si3N4基底上镀制了Mo/Si多层膜,制成了多层膜分束镜。利用X射线掠入射衍射的方法测量了Mo/Si多层膜的周期。用扩束He-Ne激光束进行的投影成像方法定性分析了分束镜的面形精度,利用光学轮廓仪完成了分束镜面形精确测量。利用北京同步辐射装置测量了分束镜反射率和透射率,在13.9 nm处,分束镜反射率和透过率乘积达4%。使用多层膜分束镜构建了软X射线马赫贞德干涉仪,并应用于13.9 nm软X射线激光干涉实验中,获得了清晰的含有C8H8等离子体电子密度信息的动态干涉条纹。     

13.9 nm马赫贞德干涉仪用软X射线分束镜研究

 介绍了13.9 nm马赫贞德干涉仪用软X射线分束镜的设计、制备与性能检测。基于分束镜反射率和透过率乘积最大的评价标准,设计了13.9 nm软X射线激光干涉实验用多层膜分束镜。采用磁控溅射方法在有效面积为10 mm×10 mm、厚度为100 nm的Si3N4基底上镀制了Mo/Si多层膜,制成了多层膜分束镜。利用X射线掠入射衍射的方法测量了Mo/Si多层膜的周期。用扩束He-Ne激光束进行的投影成像方法定性分析了分束镜的面形精度,利用光学轮廓仪完成了分束镜面形精确测量。利用北京同步辐射装置测量了分束镜反射率和透射率,在13.9 nm处,分束镜反射率和透过率乘积达4%。使用多层膜分束镜构建了软X射线马赫贞德干涉仪,并应用于13.9 nm软X射线激光干涉实验中,获得了清晰的含有C8H8等离子体电子密度信息的动态干涉条纹。     

Unified design of wavelength-independent deep-etched fused-silica gratings

We present a unified design of wavelength-independent deep-etched fused-silica gratings as polarizing beam splitters and polarization-independent two-port beam splitters by using the simplified modal method. By defining unified grating parameters as the ratio of incident wavelength to grating period and the ratio of groove depth to grating period, unified grating structures are found to be approximately wavelength-independent, which is based on the modal view of the accumulated phase difference of two excited propagating grating modes. Diffraction efficiencies given by the rigorous coupled-wave analysis (RCWA) verified this unified design at the wavelength of 1064 nm. It should be noted that this unified design of wavelength-independent gratings is an analytic result, which is impossible to be derived with the well-known numerical RCWA. Modal method is powerful and presents a clear physical picture for us to obtain this unified design. Therefore, this unified design can be used as a general guideline for designing deep-etched fused-silica gratings as beam splitters for practical applications from ultraviolet to near infrared.     

The modelling of integrated optical power splitters and switches based on generalised Mach–Zehnder devices

Integrated power splitters and switches are useful components in optical communication systems and optical integrated circuits. They have the advantages of robustness, ease of fabrication and low excess loss. In this paper a new matrix model for configurable power splitters based on the generalised Mach–Zehnder principle is presented. The model is then extended to encompass also the design of a class of optical switch.     

软X射线多层膜分束镜的研制

介绍了软件Ｘ射线多层膜分束镜的制备,采用蚀基底法和氯化钠脱膜分离法制备且获得了大面积的Ｍｏ／Ｓｉ多层膜分束镜。     

Fabrication of pellicle beam splitters for optical bus application

The optical bus architecture for on-board applications requires a number of optical splitters with precise split ratios to route part of the input signal. Since hollow metal waveguide provides well collimated beams with very small gap loss, it opens the possibility of inserting discrete optical beam splitters (taps). The optical tap requires low excess loss, polarization insensitivity, temperature stability, minimized walk-off of the propagating beam, and cost effective manufacturing. By benefiting from the mature interference coating technology for polarization insensitivity and temperature stability, we design a pellicle beam splitter based on a static microelec tro-mechanical system (MEMS) and develop processes to fabricate pellicle splitters using wafer level bonding of silicon and glass substrates, with subsequent thinning to 20 μm. With the approaches described in this paper, we have demonstrated optical beam splitters with excess loss of less than 0.17 dB that operate at a data rate of 10 Gb/s showing a clean eye diagram while providing controlled split ratio and polarization insensitivity. We have demonstrated a high yielding MEMS based silicon processing platform which has the potential to provide a cost effective manufacturing solution for optical beam splitters.     

Micromachining by CO2 laser ablation: Building blocks for a multiport integrated device

We report on the design and fabrication of complex microcomponents based on multimode optical interference, using a CO₂ laser ablation technique. Mode confinement, power division and losses are assessed. Power splitters show a good balance in the intensity division but beam combiners exhibit a variation in output power. The devices are compact and show a low sensitivity to imperfections in the fabrication process. The results demonstrate the technique's potential to develop multiport integrated circuits.     

High-throughput, high-damage-threshold broadband beam splitter for high-order harmonics in the extreme-ultraviolet region

We demonstrate a high-throughput and high-damage-threshold beam splitter for high-order harmonics in the soft-x-ray region that uses Si and (or) SiC plates set at Brewster's angle with respect to the pump wavelength. The beam splitters are guaranteed to have a damage threshold of at least 0.8 TW/cm2 (average power density, 0.25 W/cm2) and an attenuation rate of 10(-4)-10(-5) for a 30-fs pump pulse. The measured reflection efficiency at the 27th harmonic (29.6 nm) was 0.56 for Si and 0.45 for SiC. These beam splitters are useful not only for high harmonics but also for longitudinally pumped x-ray lasers.     

Diffraction grating with rectangular grooves exceeding 80% diffraction efficiency

A novel design for a surface relief grating with rectangular grooves is presented. The first reflected diffraction order shows experimentally 84% diffraction efficiency for a metallic grating. The required binary surface relief can be manufactured by using one single microlithographic fabrication step similar to standard processes in microelectronics. Each period of the grating consists of a subwavelength “minilattice” with a variable duty cycle. A theoretical model of the structure is presented and compared to measurements at 10.6 μm wavelength. Applications ranging from deflectors, polarizing beam splitters, variable attenuators to general diffractive components such as kinoforms for laser beam shaping are proposed.     

非对称偏振分束光栅的矢量衍射优化设计

基于严格耦合波理论分析了一种非对称偏振分束光栅的设计。这种偏振分束光栅分别在1级和0级衍射级次上衍射TE和TM偏振波。介绍了利用遗传算法设计偏振分束光栅的方法,并给出了优化实例。仿真结果表明:在设计波长为1.55时,TE偏振波在1级的衍射效率大于93%,TM偏振波在0级的衍射效率大于99%,此时1级和0级的透射消光比分别达到了9914.1和46841.5。通过对设计结果的分析发现,该偏振分束光栅在设计波长附近100nm的波长范围内都具有较高的消光比(大于100),达到了较好的偏振分束效果。     

Properties of a 1 × 4 optical power splitter made of photonic crystal waveguides

Optical power splitters made of photonic crystal waveguides are believed to become essential components for compact photonic integrated circuits used in fiber optic networks. We design a 1 × 4 optical power splitter made of linear-defect waveguides in photonic crystals, and analyze its properties using the finite-difference time-domain method. Our simulation results show that the transmission properties vary with wave frequency and branch geometry, and that an incident wave is divided equally into four output ports. To reduce the reflections at the three branching regions in the 1 × 4 splitter, we place the defects of extra rods in the branching region, and achieve high transmission in each output waveguide.     

Diffractive beam splitter characterization via a power-recycled interferometer

We used the high-precision laser interferometer technique of power recycling to characterize the optical loss of an all-reflective grating beam splitter. This beam splitter was used to set up a Michelson interferometer with a power-recycling resonator with a finesse of 883. Analyzing the results obtained, we determined the beam splitter's total optical loss to be (0.193+/-0.019)%. Low loss all-reflective beam splitters might find application in future high-power laser interferometers for the detection of gravitational waves.     

DESIGN OF 2-D QUASI-OPTICAL BEAM SPLITTERS USING ANALYTICAL GRADIENTS

Quasi-optical systems comprised of diffractive phase elements (DPEs) are designed as beam splitters. The design tasks are reformulated as optimization problems in which target functionals are defined. Analytical gradients are derived to those functionals, which can be passed to gradient methods to efficiently determine the DPEs. Rayleigh-Sommerfeld diffraction integrals are applied to compute the wave propagation in free-space between parallel planes in the quasi-optical systems. Numerical results for several beam splitters are depicted. Furthermore a procedure is proposed, how the phase functions of the DPEs could be smoothed out.     

基于亚波长偏振光栅的偏振光分束器设计

利用琼斯矩阵和矢量傅里叶系数方法分析了二元亚波长偏振光栅的偏振特性和衍射效率,并给出了相应的数学解析式.研究发现,通过入射光的偏振可以控制不同衍射输出级的偏振态,且0级输入偏振态与输出偏振态始终相同,而其它级次除线偏光外都与入射偏振态相反.当二元亚波长偏振光栅的位相延迟分别设置为0.62π和π时,可以将二元亚波长偏振光栅设计为1→3或1→2的偏振光分束器,且分束器具有衍射效率高、宽带宽、对入射角的变化不甚敏感的特点.     

On use of ghost-less beam splitter in reversal shear interferometer for measurement of spatial coherence of large cross-section laser beam

A configuration of reversal shear interferometer suitable for measurement of spatial coherence of high average power, large cross-section laser beam has been discussed. Ghost-less beam splitters in which unwanted multiple reflections from the surfaces have been suppressed by total internal reflection are used for beam splitting and re-combination. Advantages and drawbacks of this configuration have been discussed.     

Design of Multi-layer Dielectric Thin-film Polarizing Beam Splitters by Adaptive Simulated Annealing Method

Polarizing beam splitters (PBS’s) are essential components in optical systems such as liquid crystal displays, optical communication and optical recording. Adaptive simulated annealing (ASA) method is introduced here to design cubic PBS’s. A cubic PBS used in visual spectral is shown first, which has the characteristics of broadband, wide angular field. Then a cubic PBS used in communication C-band is illustrated, which has the advantage of large polarization extinction ratio. For the designed PBS’s, both the transmittance and reflectance can be utilized. It can be concluded that the ASA method can not only get significantly reasonable results but also show fast convergent speed and less memory occupation for designing PBS’s thin film filters.     

All-optical analog-to-digital converters based on cascaded 3-dB power splitters in 2D photonic crystals

In this paper, a new design of a photonic crystal (PC) all-optical analog-to-digital converter (ADC), which is based on cascaded 3-dB power splitters, is presented. It has been shown that by choosing appropriate threshold values in the output ports of the 3-dB power splitters, a set of unique states corresponding to different power levels of input analog signal can be obtained. It has been demonstrated that based on the proposed approach, the design of 2 and 3-bit PC ADC can be achievable.     

Archimedes 32,4,3,4结构光子晶体中与偏振无关的自准直分束器

通过等频图分析并结合时域有限差分法法模拟, 在Archimedes 3²,4,3,4结构排列的二维光子晶体中同一频率下同时实现了电磁波两种偏振态的自准直. 研究发现,在该结构光子晶体中引入缺陷,当线缺陷宽度改变时, TE和TM两种偏振态光束的分束效果将会随之变化.由此通过控制缺陷宽度,分别实现了两种偏振态光束的50% ∶50%分束以及90°大角度光折弯,分束和折弯的效率都较为理想,为未来设计基于光子晶体的新型光子学器件提供了一种新的思路.