Determination of methyl 13C-15N dipolar couplings in peptides and proteins by three-dimensional and four-dimensional magic-angle spinning solid-state NMR spectroscopy

We describe three- and four-dimensional semiconstant-time transferred echo double resonance (SCT-TEDOR) magic-angle spinning solid-state nuclear magnetic resonance (NMR) experiments for the simultaneous measurement of multiple long-range (15)N-(13)C(methyl) dipolar couplings in uniformly (13)C, (15)N-enriched peptides and proteins with high resolution and sensitivity. The methods take advantage of (13)C spin topologies characteristic of the side-chain methyl groups in amino acids alanine, isoleucine, leucine, methionine, threonine, and valine to encode up to three distinct frequencies ((15)N-(13)C(methyl) dipolar coupling, (15)N chemical shift, and (13)C(methyl) chemical shift) within a single SCT evolution period of initial duration approximately 1(1)J(CC) (where (1)J(CC) approximately 35 Hz, is the one-bond (13)C(methyl)-(13)C J-coupling) while concurrently suppressing the modulation of NMR coherences due to (13)C-(13)C and (15)N-(13)C J-couplings and transverse relaxation. The SCT-TEDOR schemes offer several important advantages over previous methods of this type. First, significant (approximately twofold to threefold) gains in experimental sensitivity can be realized for weak (15)N-(13)C(methyl) dipolar couplings (corresponding to structurally interesting, approximately 3.5 A or longer, distances) and typical (13)C(methyl) transverse relaxation rates. Second, the entire SCT evolution period can be used for (13)C(methyl) and/or (15)N frequency encoding, leading to increased spectral resolution with minimal additional coherence decay. Third, the experiments are inherently "methyl selective," which results in simplified NMR spectra and obviates the use of frequency-selective pulses or other spectral filtering techniques. Finally, the (15)N-(13)C cross-peak buildup trajectories are purely dipolar in nature (i.e., not influenced by J-couplings or relaxation), which enables the straightforward extraction of (15)N-(13)C(methyl) distances using an analytical model. The SCT-TEDOR experiments are demonstrated on a uniformly (13)C, (15)N-labeled peptide, N-acetyl-valine, and a 56 amino acid protein, B1 immunoglobulin-binding domain of protein G (GB1), where the measured (15)N-(13)C(methyl) dipolar couplings provide site-specific information about side-chain dihedral angles and the packing of protein molecules in the crystal lattice.     

Determination of peptide backbone torsion angles using double-quantum dipolar recoupling solid-state NMR spectroscopy

Several approaches for utilizing dipolar recoupling solid-state NMR (ssNMR) techniques to determine local structure at high resolution in peptides and proteins have been developed. However, many of these techniques measure only one torsion angle or are accurate for only certain classes of secondary structure. Additionally, the efficiency with which these dipolar recoupling experiments suppress the deleterious effects of chemical shift anisotropy (CSA) at high magnetic field strengths varies. Dipolar recoupling with a windowless sequence (DRAWS) has proven to be an effective pulse sequence for exciting double-quantum (DQ) coherences between adjacent carbonyl carbons along the peptide backbone. By allowing this DQ coherence to evolve, it is possible to measure the relative orientations of the CSA tensors and subsequently use this information to determine the Ramachandran torsion angles phi and psi. Here, we explore the accuracies of the assumptions made in interpreting DQ-DRAWS data and demonstrate their fidelity in measuring torsion angles corresponding to a variety of secondary structures irrespective of hydrogen-bonding patterns. It is shown how a simple choice of isotopic labels and experimental conditions allows accurate measurement of backbone secondary structures without any prior knowledge. This approach is considerably more sensitive for determining structure in helices and has comparable accuracy for beta-sheet and extended conformations relative to other methods. We also illustrate the ability of DQ-DRAWS to distinguish between structures in heterogeneous samples.     

High resolution 3D exchange NMR spectroscopy and the mapping of connectivities between half-integer quadrupolar nuclei

A novel approach to the determination of structure and potential dynamics in the solid-state NMR spectroscopy of half-integer quadrupolar nuclei is proposed and demonstrated. The new experiment combines into a single three-dimensional sequence, 2D multiple-quantum magic-angle-spinning NMR and 2D exchange NMR protocols. The result separates for each inequivalent chemical site its spin-diffusion powder line shape to proximate homonuclei. A peculiar feature of the experiment is the asymmetry it displays in the individual 2D powder patterns, resulting from its encoding of isotropic shifts before the mixing period. The resulting spectra facilitate the interpretation of the structural and dynamic features for the individual sites; experimental applications of this new method to relative geometry determinations in 23Na-23Na spin pairs are presented, and the quantitative evaluation of the resulting data is briefly discussed.     

Protein 3D structure determination by high-resolution solid-state NMR

Developments in NMR technology, sample preparation, pulse sequence methodology and structure calculation protocols have recently allowed one to progress towards structure determination at high-resolution of proteins by solid-state NMR spectroscopy. We here report solid-state NMR protocols based on magic-angle-spinning experiments, combined with modified structure calculation protocols, for structure determination of uniformly ¹³C, ¹⁵N isotopically labeled proteins. We demonstrate the use of these protocols to obtain high-resolution structures for the example of the microcrystalline Crh protein. The CHHC, DARR and PAR solid-state NMR experiments, as well as the calculation protocols using the program ARIA, are presented.     

Direct observation of enhanced translocation of a homeodomain between DNA cognate sites by NMR exchange spectroscopy

A novel approach is presented for studying the kinetics of specific protein-DNA interactions by NMR exchange spectroscopy. The experimental design involves the direct observation of translocation of a homeodomain between cognate sites on two oligonucleotide duplexes, differing by only a single base pair at the edge of the DNA recognition sequence. The single base-pair change perturbs the 1H-15N correlation spectrum of a number of residues, while leaving the affinity for the DNA unchanged. The exchange process has apparent rate constants in the 5-20 s-1 range which are linearly dependent upon the concentration of free DNA. These rates are about 3 orders of magnitude larger than the dissociation rate constant determined by gel shift assays at nanomolar DNA concentrations. The complete NMR exchange data set, comprising auto- and cross-peak intensities as a function of mixing time at five concentrations of free DNA, can be fit simultaneously to a simple model in which protein translocation between DNA duplexes occurs via a second-order process (with rate constants of approximately 6 x 104 M-1 s-1) involving direct collision of a protein-DNA complex with free DNA. This is akin to intersegmental transfer, and a physical model for the process is discussed. Rapid translocation at high concentrations of free DNA observed directly by NMR exchange spectroscopy reconciles the long half-lives of protein-DNA complexes measured by biochemical analysis in vitro with the highly dynamic behavior of such complexes observed in vivo. The relevance of this mechanism to the kinetics of protein-DNA interactions within the cell is discussed.     

Backbone conformational constraints in a microcrystalline U-15N-labeled protein by 3D dipolar-shift solid-state NMR spectroscopy

Structural studies of uniformly labeled proteins by magic-angle spinning NMR spectroscopy have rapidly matured in recent years. Site-specific chemical shifts of several proteins have been assigned and structures determined from 2D or 3D data sets containing internuclear distance information. Here we demonstrate the application of a complementary technique for constraining protein backbone geometry using a site-resolved 3D dipolar-shift pulse sequence. The dipolar line shapes report on the relative orientations of 1H-15N[i] to 1H-15N[i+1] dipole vectors, constraining the torsion angles phi[i] and psi[i]. In addition, from the same 3D data set, several 1H-15N[i] to1H-15N[i+2] line shapes are extracted to constrain the torsion angles phi[i], psi[i], phi[i+1], and psi[i+1]. We report results for the majority of sites in the 56-residue beta1 immunoglobulin binding domain of protein G (GB1), using 3D experiments at 600 MHz 1H frequency. Excellent agreement between the SSNMR results and a new 1.14 A crystal structure illustrate the general potential of this technique for high-resolution structural refinement of solid proteins.     

Short- and medium-range order in sodium aluminophosphate glasses: new insights from high-resolution dipolar solid-state NMR spectroscopy

The structures of sodium aluminophosphate glasses prepared by both sol-gel as well as melt-cooling routes have been extensively characterized by high-resolution solid-state 23Na, 27Al, and 31P single and double-resonance NMR techniques, including quantitative connectivity studies by 27Al <--> 31P and 23Na <--> 31P rotational echo double-resonance (REDOR) methods. Studies along four compositional lines, I: (AlPO4)x -(NaPO3)1-x, II: (Na2O)x -(AlPO4)1-x, III: (NaAlO2)x -(NaPO3)1-x, and IV: (Al2O3)x (NaPO3)1-x, reveal that the network structures of those glasses that are accessible by either preparation method are essentially identical. However, the significantly extended glass-forming ranges available by the sol-gel route facilitate exploration of the structure/composition relationships in more detail, revealing a number of interesting universal features throughout the whole glass system. Both short- and medium-range order appear to be controlled strongly by the O/P ratio of the glasses studied: Up to an O/P ratio of 3.5 (pyrophosphate composition), aluminum is predominantly six-coordinated and fully connected to phosphorus (Al(OP)6 sites). In the region 3.5 < or = O/P < or = 4.0, a dramatic structural transformation takes place, leading to the appearance of additional four- and five-coordinated aluminum species whose second coordination spheres are also entirely dominated by phosphorus. The structure of glasses with an O/P ratio of precisely 4.0 (orthophosphate) is dominated by Al(OP)4 units. As the O/P ratio increases beyond 4.0, the average extent of Al-O-P connectivity is decreased significantly. Here, new types of five- and six-coordinated aluminum units, which are only weakly connected to phosphorus, are formed, while the network modifier is attracted mainly by the phosphate units.     

Resolution enhancement in multidimensional solid-state NMR spectroscopy of proteins using spin-state selection

We show that the resolution of homonuclear multidimensional solid-state NMR correlation experiments can be significantly improved using transition selection and spin-state-selective polarization transfer techniques. The selection and transfer of single states allow the removal of the J-coupling contribution from the line width in both the direct and indirect spectral dimensions. This is demonstrated with a new spin-state-selective CO-Calpha correlation experiment, applied to a microcrystalline 85-residue protein. With this new sequence, all four components of the CO-Calpha cross-peaks are separated into different spectra, obtained by linear combination of four recorded data sets. Line narrowing of up to 44% was obtained on the protein sample for the spin-state-selective CO-Calpha spectrum compared to a standard spin-diffusion experiment. The new technique also allows an easy distinction between "direct" and "relayed" transfer cross-peaks.     

Janocchio--a Java applet for viewing 3D structures and calculating NMR couplings and NOEs

We present a Java applet, based on the open source Jmol program, which allows the calculation of coupling constants and NOEs from a three-dimensional structure. The program has all the viewing features of Jmol, but adds the capability to calculate both H-H and H-C 3-bond couplings constants. In the case of H--H couplings, the Altona equation is used to perform this. The program also calculates NOEs using the full relaxation matrix approach. All these calculations are driven from a simple point and click interface. The program can calculate values for multi-structure files, and can produce input files for the conformational fitting program NAMFIS.     

Efficient identification of different types of carbons in organic solids by 2D solid-state NMR spectroscopy

An efficient method for identifying different types of carbon groups (CH(3), CH(2), CH, and quaternary carbons) in organic solids is proposed by utilizing the combination of a two-dimensional (2D) (13)C-(1)H polarization inversion spin exchange at magic angle (PISEMA) NMR experiment and numerical simulation results of simple isolated (13)C-(1)H dipolar coupling models. Our results reveal that there is a unique line shape of the (13)C-(1)H dipolar splitting pattern and a corresponding characteristic splitting value for each carbon group, based on which different carbon types can be distinguished unambiguously. In particular, by using this method, the discrimination and assignment of overlapped signals from different types of carbons can be achieved easily. The efficacy of this method is demonstrated on typical solid small molecules, polymers, and biomacromolecules.     

Characterization of protein-ligand interactions by high-resolution solid-state NMR spectroscopy

A novel approach for detection of ligand binding to a protein in solid samples is described. Hydrated precipitates of the anti-apoptotic protein Bcl-xL show well-resolved (13)C-(13)C 2D solid-state NMR spectra that allow site-specific assignment of resonances for many residues in uniformly (13)C-enriched samples. Binding of a small peptide or drug-like organic molecule leads to changes in the chemical shift of resonances from multiple residues in the protein that can be monitored to characterize binding. Differential chemical shifts can be used to distinguish between direct protein-ligand contacts and small conformational changes of the protein induced by ligand binding. The agreement with prior solution-state NMR results indicates that the binding pocket in solid and liquid samples is similar for this protein. Advantages of different labeling schemes involving selective (13)C enrichment of methyl groups of Ala, Val, Leu, and Ile (Cdelta1) for characterizing protein-ligand interactions are also discussed. It is demonstrated that high-resolution solid-state NMR spectroscopy on uniformly or extensively (13)C-enriched samples has the potential to screen proteins of moderate size ( approximately 20 kDa) for ligand binding as hydrated solids. The results presented here suggest the possibility of using solid-state NMR to study ligand binding in proteins not amenable to solution NMR.     

On-line detection of emulsion polymerization by solid-state NMR spectroscopy

 The on-line detection of emulsion polymerization processes by means of solid-state NMR spectroscopy is demonstrated for the first time using poly(butyl acrylate) as a model system. Relatively short time intervals are accessible via ¹H detection while the use of ¹³C NMR spectroscopy results in an increased spectral resolution. Details of sample preparation and experimental techniques are given, while remaining artifacts of the preliminary results will be addressed in further investigations. Received: 7 November 1997 Accepted: 5 January 1998     

Hydrogen exchange in benzamidoximes studied by NMR spectroscopy

The hydrogen exchange process in benzamidoximes ( 1 and 2 ) was studied over a range of temperature and a determination of the activation parameter ΔG? for this process was made.     

Effective Hamiltonians by optimal control: solid-state NMR double-quantum planar and isotropic dipolar recoupling

We report the use of optimal control algorithms for tailoring the effective Hamiltonians in nuclear magnetic resonance (NMR) spectroscopy through sophisticated radio-frequency (rf) pulse irradiation. Specifically, we address dipolar recoupling in solid-state NMR of powder samples for which case pulse sequences offering evolution under planar double-quantum and isotropic mixing dipolar coupling Hamiltonians are designed. The pulse sequences are constructed numerically to cope with a range of experimental conditions such as inhomogeneous rf fields, spread of chemical shifts, the intrinsic orientation dependencies of powder samples, and sample spinning. While the vast majority of previous dipolar recoupling sequences are operating through planar double-or zero-quantum effective Hamiltonians, we present here not only improved variants of such experiments but also for the first time homonuclear isotropic mixing sequences which transfers all I(x), I(y), and I(z) polarizations from one spin to the same operators on another spin simultaneously and with equal efficiency. This property may be exploited to increase the signal-to-noise ratio of two-dimensional experiments by a factor of square root 2 compared to conventional solid-state methods otherwise showing the same efficiency. The sequences are tested numerically and experimentally for a powder of (13)C(alpha),(13)C(beta)-L-alanine and demonstrate substantial sensitivity gains over previous dipolar recoupling experiments.     

Proton-detected solid-state NMR spectroscopy of fully protonated proteins at 40 kHz magic-angle spinning

Remarkable progress in solid-state NMR has enabled complete structure determination of uniformly labeled proteins in the size range of 5-10 kDa. Expanding these applications to larger or mass-limited systems requires further improvements in spectral sensitivity, for which inverse detection of 13C and 15N signals with 1H is one promising approach. Proton detection has previously been demonstrated to offer sensitivity benefits in the limit of sparse protonation or with approximately 30 kHz magic-angle spinning (MAS). Here we focus on experimental schemes for proteins with approximately 100% protonation. Full protonation simplifies sample preparation and permits more complete chemical shift information to be obtained from a single sample. We demonstrate experimental schemes using the fully protonated, uniformly 13C,15N-labeled protein GB1 at 40 kHz MAS rate with 1.6-mm rotors. At 500 MHz proton frequency, 1-ppm proton line widths were observed (500 +/- 150 Hz), and the sensitivity was enhanced by 3 and 4 times, respectively, versus direct 13C and 15N detection. The enhanced sensitivity enabled a family of 3D experiments for spectral assignment to be performed in a time-efficient manner with less than a micromole of protein. CANH, CONH, and NCAH 3D spectra provided sufficient resolution and sensitivity to make full backbone and partial side-chain proton assignments. At 750 MHz proton frequency and 40 kHz MAS rate, proton line widths improve further in an absolute sense (360 +/- 115 Hz). Sensitivity and resolution increase in a better than linear manner with increasing magnetic field, resulting in 14 times greater sensitivity for 1H detection relative to that of 15N detection.     

Structure, topology, and dynamics of membrane peptides and proteins from solid-state NMR spectroscopy

The high-resolution structure of membrane proteins is notoriously difficult to determine due to the hydrophobic nature of the protein-membrane complexes. Solid-state NMR spectroscopy is a unique and powerful atomic-resolution probe of the structure and dynamics of these important biological molecules. A number of new solid-state NMR methods for determining the depth of insertion, orientation, oligomeric structure, and long-range (10-15 A) distances of membrane proteins are summarized. Membrane protein depths can now be determined using several complementary techniques with varying site-specificity, distance precision, and mobility requirement on the protein. Membrane protein orientation can now be determined with or without macroscopic alignment, the latter providing a novel alternative for orientation determination of intrinsically curvature-inducing proteins. The novel analyses of beta-sheet membrane protein orientation are described. The quaternary structure of membrane peptide assemblies can now be elucidated using a 19F spin diffusion technique that simultaneously yields the oligomeric number and intermolecular distances up to 15 A. Finally, long-range distances up to approximately 10 A can now be measured using 1H spins with an accuracy of better than 1 A. These methods are demonstrated on several beta-sheet membrane peptides with antimicrobial activities and on two alpha-helical ion-channel proteins. Finally, we show that the nearly ubiquitous dynamics of membrane proteins can be readily examined using 2D correlation experiments. An intimate appreciation of molecular motion in these systems not only leads to important insights into the specific function of these membrane proteins but also may be exploited for other purposes such as orientation determination.