卡那霉素A酶联适配体检测方法研究

通过EDC法偶联辣根过氧化物酶(HRP)和卡那霉素A(Kanamycin,KaA)分子制备酶标记物,采用棋盘滴定法确定链霉亲和素(Streptavidin,SA)的包被浓度为8 mg/L,通过单因素实验优化了检测条件,建立了卡那霉素A酶联适配体检测(Enzyme-linked aptamer assay,ELAA)方法。本方法半抑制浓度(IC50)为2.2"g/L,检出限(LOD)为0.04"g/L,检测范围(IC20～IC80)为0.07～71.5"g/L,与结构类似物无明显交叉反应;对牛奶、猪肉、猪肝、鸡肉、蜂蜜样品加标回收率在78%～100%之间,平均相对标准偏差小于11.1%。本方法特异性强、灵敏度高,适用于食品中卡那霉素A的快速检测。     

基于新型量子点荧光微球的氯霉素免疫层析试纸条的制备和应用

以羧基化CdTe/ZnSe量子点荧光微球为标记物,通过1-乙基-(3-二甲基氨基丙基)碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)活化法将氯霉素(CAP)单克隆抗体与量子点荧光微球偶联制备荧光探针.氯霉素全抗原(CAP-HS-BSA)及羊抗鼠二抗分别喷涂硝酸纤维素膜,形成检测线(T线)和质控线(C线),组装成新型氯霉素量子点荧光微球免疫层析试纸条,建立了快速、定量检测牛奶中CAP的方法.本研究开发的量子点荧光微球试纸条可在15 min内完成牛奶样品中CAP的定量检测,线性范围为0.1~100.0μg/L,检出限为0.1μg/L.牛奶样品CAP的加标回收率为93.3%~97.9%,相对标准偏差在4.9%~6.9%之间.     

高效液相色谱-化学发光法检测牛奶中磺胺类药物残留

以4种磺胺类药物(Sulfonamides, SAs), 即磺胺脒(Sulfaguanidine, SGD)、磺胺嘧啶(sulfadiazine, SDZ)、磺胺噻唑(sulfathiazole, STZ)和磺胺二甲嘧啶(Sulfamethazine,SMZ)为分析物,基于其在碱性介质中对Ag配合物-鲁米诺(Luminol)与Ni配合物鲁米诺两化学发光体系发光强度均具有抑制作用的性质,建立了高效液相色谱-化学发光法检测牛奶中4种磺胺类药物的方法.将化学发光体系作为高效液相色谱的新型检测器,并对两种化学发光体系的检测器性能进行了比较.4种磺胺药物经高效液相色谱分离后,分别与Ag-Luminol及Ni-Luminol化学发光体系作用.色谱条件为:反相C18分离柱(250 mm × 4.6 mm,5 μm);0.1%甲酸-甲醇为流动相(V/V);梯度洗脱;流速1 mL/min.化学发光条件:Ag、Ni-Luminol两体系中,Ag配合物浓度1.4×10.-4 mol/L(含0.12 mol/L NaOH);Ni配合物浓度1.5×10.-5 mol/L(含0.12 mol/L NaOH);Luminol浓度均为1.2×10.-7 mol/L;试剂流速均为1.0 mL/min.在最佳的分离检测条件下,Ag-Luminol体系检测4种磺胺类药物的检出限分别为0.15、0.96、1.10和1.50 μg/mL,加标回收率为81.0%~101.5%;Ni-Luminol体系检测SGD、SDZ、STZ 3种磺胺类药物的检出限分别为1.5、17.2和16.8 μg/mL,加标回收率为83.9%~110.8%.相比之下,Ag-Luminol体系作为高效液相色谱检测器更佳.应用本方法对牛奶中4种磺胺类药物残留量进行检测,结果令人满意.     

基于HILIC模式的超高效液相色谱-串联质谱法检测牛奶中12种氨基糖苷类药物

利用低密度键合C18柱,在亲水作用色谱(HILIC)模式下,对氨基糖苷类(AGs)抗生素进行分离测定,建立了牛奶中12种AGs类药物的超高效液相色谱-串联质谱(UPLC-MS/MS)检测方法。方法采用乙腈、甲酸和水作为流动相,梯度洗脱,40℃柱温条件,整个反应体系中未使用离子对试剂。该方法在250~5000μg/L范围内对庆大霉素和新霉素、150~3000μg/L范围内对安普霉素和巴龙霉素以及在50~1000μg/L范围内对其它6种药物的线性关系良好。方法的检测限为20~100μg/L,定量限为50~250μg/L。20~1000μg/L浓度添加试验表明,样品中的平均添加回收率在60.9%~109.2%之间,日内变异系数在6.8%~15%之间,日间变异系数在3.2%~18%之间。综上所述,本研究建立的AGs类抗生素残留检测方法能够为AGs类抗生素的残留监测提供有效的技术支持。     

毛细管电泳柱后衍生激光诱导荧光测定动物组织中卡那霉素类抗生素

采用毛细管电泳柱后衍生激光诱导荧光测定3种卡那霉素类抗生素。研究了在反向电渗流条件下HAc-NaAc缓冲液酸度和浓度对卡那霉素类抗生素分离的影响,研究了Na2B4O7缓冲体系和柱后衍生试剂萘二醛/2-巯基乙醇浓度对检测信号的影响。采用50 mmol/L HAc-NaAc(pH5.0) 0.5 mmol/L CTMAB溶液为分离缓冲液,样品在-15 kV下分离,与柱后衍生试剂1.0 mmol/L NDA 8.0 mmol/L 2-ME 35 mmol/LNa2B4O7(pH10.0)的30%(V/V)甲醇溶液反应,激发诱导荧光检测卡那霉素类抗生素检出限为3.6×10-5~5.2×10-5g/L;本方法用于动物组织中卡那霉素类抗生素残留检测,相对标准偏差小于7.2%;回收率为90.2%~95.3%(n=4)。     

聚(甲基丙烯酸-乙二醇二甲基丙烯酸酯)搅拌棒吸附萃取与液相色谱-质谱联用检测牛奶中的磺胺类药物

将聚(甲基丙烯酸-乙二醇二甲基丙烯酸酯) (poly(MAA-co-EDMA))聚合物原位聚合于玻璃内插管外表面上,得到一种多孔聚合物涂层;将其作为搅拌棒吸附萃取的萃取介质,考察了其对磺胺类药物的萃取性能;最后将其与高效液相色谱-电喷雾质谱(HPLC-ESI-MS)联用,建立了一种牛奶中4种磺胺类药物的检测方法。在最佳条件下,牛奶中4种磺胺类药物的检出限(S/N=3)和定量限(S/N=10)分别为0.11～0.52 μg/L和0.35～1.72 μg/L。在1～500 μg/L的范围内峰面积与质量浓度具有良好的线性关系,日内、日间测定的相对标准偏差不高于11.3%。结果表明,该方法简便、灵敏度高且成本低,适合于牛奶中磺胺类药物的检测。     

基于适配体的石墨烯修饰玻碳电极检测卡那霉素

建立了一种基于适配体和石墨烯修饰玻碳电极检测卡那霉素的方法。卡那霉素适配体(Kanaaptamer)可以吸附在石墨烯(Gr)修饰的电极表面,从而阻碍电化学探针[Fe(CN)6]3-/4-与电极表面的电子传递,然而与含有卡那霉素的样品反应后,卡那霉素能与适配体结合并使其从电极上置换脱落,对界面电子传递的阻碍作用降低,探针的电化学信号得到恢复。通过循环伏安法和原子力显微镜法对该过程进行了表征。该原理被用于对卡那霉素进行电化学检测,结果表明:在优化条件下,用差分脉冲伏安法(DPV)检测卡那霉素时,其线性范围为1×10-6~1×10-5mol/L,检出限为5×10-7mol/L。该方法应用于牛奶样品中卡那霉素的检测,结果满意。     

伏安免疫法检测牛奶中氯霉素残留

为探索用于现场检测牛乳中氯霉素(CAP)残留的高灵敏度及特异性强的免疫传感器方法,本实验在制备CAP单克隆抗体的基础上,以卵清蛋白-氯霉素(OVA-CAP)偶联物为包被抗原,并将其包被到聚苯乙烯反应板上;在孵育反应中,样品中的CAP与OVA-CAP竞争结合CAP单克隆抗体,洗涤后加入碱性磷酸酶(ALP)标记的二抗,经再次孵育及洗涤后加入对硝基苯磷酸(pNPP)底物液;反应终止后用线性导数伏安法记录pNPP水解产物的氧化峰电流。实验结果表明,用免疫传感法测试CAP的灵敏度高于传统的间接竞争酶联免疫吸附法(ELISA)。该方法检测CAP的检出限为0.064μg/L;检测线性范围为0.15~600μg/L,测试牛奶样品的平均回收率为89.8%。另外,由于免疫电化学传感器体积较小,便于携带,操作简单,可实现牛乳样品中CAP残留的现场检测。     

控温相变免疫分析测定雌酮

通过热引发聚合与氧化还原引发聚合，合成水凝胶，作为雌酮全抗原(E1— BSA)载体；以异硫氰基灾光素标记雌酮的单克隆抗体(McAb)作为示踪剂，建立了控温相变竞争免疫分析测定雌酮(EI)的方法并应用于分析血清样品。实验表明：以热引发聚合合成的水凝胶为载体的荧光免疫分析方法具有更高的灵敏度，它的线性范围为10-700μg/L，检出限为1μg／L(n=10，3倍空白)。经水凝胶性质的比较(包括LCST、非特异性吸附、抗原与抗体反应时间及固定化抗原活性)，证明了热引发聚合的水凝胶较氧化还原引发聚合的水凝胶更适合于作为免疫分析的载体。     

毛细管电泳-电容耦合非接触电导法检测牛奶中金属离子和三聚氰胺

采用毛细管电泳-电容耦合非接触电导法检测牛奶中金属离子和三聚氰胺的含量.以20 mmol/L乳酸溶液为背景电解质,采用毛细管(50 μm×50 cm,有效长度40 cm),电导检测器的操作参数为180 kHz×8 V,对标准品和牛奶中K+, Ca2+和Na+的检出限为0.009～0.040 μg/g,对三聚氰胺的检出限为0.10～0.20 μg/g.本方法仪器简单,可以对牛奶中三聚氰胺及无光学活性的无机离子进行快速准确的检测.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.