Magnetic and Mössbauer studies of fucan-coated magnetite nanoparticles for application on antitumoral activity

Fucan-coated magnetite (Fe₃O₄) nanoparticles were synthesized by the co-precipitation method and studied by Mössbauer spectroscopy and magnetic measurements. The sizes of the nanoparticles were 8–9 nm. Magnetization measurements and Mössbauer spectroscopy at 300 K revealed superparamagnetic behavior. The magnetic moment of the Fe₃O₄ is partly screened by the Fucan coating aggregation. When the magnetite nanoparticles are capped with oleic acid or fucan, reduced particle-particle interaction is observed by Mössbauer and TEM studies. The antitumoral activity of the fucan-coated nanoparticles were tested in Sarcoma 180, showing an effective reduction of the tumor size.     

Aloe vera plant-extracted solution hydrothermal synthesis and magnetic properties of magnetite (Fe3O4) nanoparticles

Magnetite (Fe₃O₄) nanoparticles have been successfully synthesized by a novel hydrothermal method using ferric acetylacetonate (Fe(C₅H₈O₂)₃) and aloe vera plant-extracted solution. The influences of different reaction temperatures and times on the structure and magnetic properties of the synthesized Fe₃O₄ nanoparticles were investigated. The synthesized nanoparticles are crystalline and have particle sizes of ～6–30 nm, as revealed by transmission electron microscopy (TEM). The results of X-ray diffraction (XRD), High resolution TEM (HRTEM) and selected area electron diffraction (SAED) indicate that the synthesized Fe₃O₄ nanoparticles have the inverse cubic spinel structure without the presence of any other phase impurities. The hysteresis loops of the Fe₃O₄ nanoparticles at room temperature show superparamagnetic behavior and the saturation magnetization of the Fe₃O₄ samples increases with increasing reaction temperature and time.     

Mössbauer study of a Fe3O4/PMMA nanocomposite synthesized by sonochemistry

Magnetite nanoparticles of 10 nm average size were synthesized by ultrasonic waves from the chemical reaction and precipitation of ferrous and ferric iron chloride (FeCl₃ · 6H₂O y FeCl₂ · 4H₂O) in a basic medium. The formation and the incorporation of the magnetite in PMMA were followed by XRD and Mössbauer Spectroscopy. These magnetite nanoparticles were subsequently incorporated into the polymer by ultrasonic waves in order to obtain the final sample of 5 % weight Fe₃O₄ into the polymethylmethacrylate (PMMA). Both samples Fe₃O₄ nanoparticles and 5 % Fe₃O₄/PMMA nanocomposite, were studied by Mössbauer spectroscopy in the temperature range of 300 K–77 K. In the case of room temperature, the Mössbauer spectrum of the Fe₃O₄ nanoparticles sample was fitted with two magnetic histograms, one corresponding to the tetrahedral sites (Fe^3?+?) and the other to the octahedral sites (Fe^3?+? and Fe^2?+?), while the 5 % Fe₃O₄/PMMA sample was fitted with two histograms as before and a singlet subspectrum related to a superparamagnetic behavior, caused by the dispersion of the nanoparticles into the polymer. The 77 K Mössabuer spectra for both samples were fitted with five magnetic subspectra similar to the bulk magnetite and for the 5 % Fe₃O₄/PMMA sample it was needed to add also a superparamagnetic singlet. Additionally, a study of the Verwey transition has been done and it was observed a different behavior compared with that of bulk magnetite.     

Effects of sulfur sources on properties of Cu2ZnSnS4 nanoparticles

Three Fe(β-diketonate)₃ compounds namely Fe(tmhd)₃ (tmhd = 2,2,6,6-tetramethyl-3,5-heptanedionato), Fe(hfac)₃ (hfac = hexafluoroacetylaceto), and Fe(dbm)₃ (dbm = dibenzoylmethane) were used as substitutes to Fe(acac)₃ (acac = acetyleacetonate) in the synthesis of FePt nanoparticles. The obtained superparamagnetic nanoparticles are 4–5 nm in diameter without showing a large size variation with substituent Fe(β-diketonate)₃. The synchrotron X-ray absorption spectroscopy confirmed the energy dispersive spectroscopy that as-synthesized nanoparticles were composed of iron oxides and metallic FePt₃ alloys. By employing Fe(hfac)₃, the Fe fraction was reduced and the magnetization was modest. The use of Fe(dbm)₃ as starting materials gave rise to densely packed FePt₃/Fe₂O₃ heterodimers. The replacements of Fe(acac)₃ by Fe(tmhd)₃ led to the long-range order of nanoparticle assembly with the narrowest size distribution.     

Controlling magnetic properties of iron oxide nanoparticles using post-synthesis thermal treatment

Changes in morphological and magnetic properties of Fe₃O₄ nanoparticles before and after annealing are investigated in the present work. The nanoparticles are synthesized in a standard capacitively coupled plasma enhanced chemical vapour deposition system with two electrodes using ferrocene as the source compound. Post annealing, due to the sintering process, the particles fuse along with recrystallization. This results in increased size of the nanoparticles and the interparticle interaction, which play a major role in deciding the magnetic properties. X-ray diffraction patterns of the samples before and after annealing indicate a phase change from Fe₃O₄ to Fe₂O₃. Annealing at 200 ^°C causes the apparent saturation magnetization to increase from 6 emu?g^?1 to 15 emu?g^?1. When annealed at 500 ^°C, the magnetic properties of the nanoparticles resemble those of the bulk material. The evidence for the transition from a superparamagnetic state to a collective state is also observed when annealed at 500 ^°C. Variation of the magnetic relaxation data with annealing also reflects the change in the magnetic state brought about by the annealing. The correlation between annealing temperature and the magnetic properties can be used to obtain nanocrystallites of iron oxide with different sizes and magnetic properties.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

Magnetic characterization of surface-coated magnetic nanoparticles for biomedical application

The influence of the oleic acid surface coating on Fe₃O₄ and NiFe₂O₄ nanoparticles on their magnetic and calorimetric characterization was investigated. Fe₃O₄ nanoparticles (particle sizes of 15-20 and 20-30 nm) and NiFe₂O₄ nanoparticles (particle sizes of 20-30 nm) were dispersed in oleic acid. The surface coating resulted in a decrease in the dipole-dipole interaction between the particles, which in turn affected the coercivity and heat dissipation of the nanoparticles. The coercivity of the oleic-acid-coated nanoparticles was found to be lower than that of the uncoated nanoparticles. The temperature rise in the oleic-acid-coated nanoparticles was greater than that of the uncoated nanoparticles; this temperature rise was associated with the relaxation losses. The viscosity dependence on the self-heating temperature of Fe₃O₄ nanoparticles (15-20 and 20-30 nm) under an ac magnetic field was measured. The temperature rise for both the Fe₃O₄ nanoparticles (15-20 and 20-30 nm) exhibited a strong dependence on viscosity at each magnetic field frequency, and the contribution of Brownian relaxation loss to the temperature rise was revealed. Moreover, an in vitro cytotoxicity test of Fe₃O₄ and NiFe₂O₄ was performed using human cervical carcinoma cells (HeLa), and the cytotoxicity of NiFe₂O₄ nanoparticles was compared to that of Fe₃O₄ nanoparticles.     

Magnetic and Mössbauer spectroscopic studies of NiZn ferrite nanoparticles synthesized by a combustion method

The properties of nanocrystalline Ni_0.5Zn_0.5Fe₂O₄ synthesized by an auto-combustion method have been investigated by magnetic measurements and Mössbauer spectroscopy. The as-synthesized single phase nanosized ferrite powder is annealed at different temperatures in the range 673–1,273 K to obtain nanoparticles of different sizes. The powders are characterized by powder X-ray diffraction, vibrating sample magnetometer, transmission electron microscopy and Mössbauer spectroscopy. The as-synthesized powder with average particle size of ~9 nm is superparamagnetic. Magnetic transition temperature increases up to 665 K for the nanosized powder as compared to the transition temperature of 548 K for the bulk ferrite. This has been confirmed as due to the abnormal cation distribution, as evidenced from room temperature Mössbauer spectroscopic studies.     

Synthesis and characterization of uncoated and gold-coated magnetite nanoparticles

We report on the synthesis and characterization of uncoated and gold coated magnetite nanoparticles. Structural characterizations, carried out using X-ray diffraction, confirm the formation of magnetite phase with a mean size of ~7 and ~8 nm for the uncoated and gold covered magnetite nanoparticles, respectively. The value of the gold coated Fe₃O₄ nanoparticles is consistent with the mean physical size determined from transmission electron microscopy images. Mössbauer spectra at room temperature are consistent with the thermal relaxation of magnetic moments mediated by particle-particle interactions. The 77 K Mössbauer spectra are modeled with four sextets. Those sextets are assigned to the signal of iron ions occupying the tetrahedral and octahedral sites in the core and shell parts of the particle. The room-temperature saturation magnetization value determined for the uncoated Fe₃O₄ nanoparticles is roughly ~60 emu/g and suggests the occurrence of surface effects such as magnetic disorder or the partial surface oxidation. These surface effects are reduced in the gold-coated Fe₃O₄ nanoparticles. Zero-field–cooled and field-cooled curves of both samples show irreversibilities which are consistent with a superparamagnetic behavior of interacting nanoparticles.     

Effects of surfactant and polymerization method on the synthesis of magnetic colloidal polymeric nanoparticles

The addition of superparamagnetic iron nanoparticles into polystyrene matrix allows for the modification of the physical properties as well as the implementation of new features in the hybrid nanomaterials. These materials have excellent potential for biomedical and bioengineering applications. Nevertheless, it is necessary to achieve a good dispersion of magnetic nanoparticles for its successful incorporation into polymer particles. This can be obtained through the use of a stabilizer, which provides stability against aggregation. In this work, magnetic nanoparticles were dispersed using different stabilizers. Subsequently, ferrofluids stabilized using the mixture of ABEX/IGEPAL and acrylic acid (AA) were used to synthesize PS-Fe₃O₄ nanocomposites, through miniemulsion and emulsion polymerization conventional techniques. Semicontinuous and batch processes were compared, by varying surfactants and their concentrations. The PS-Fe₃O₄ nanoparticles were characterized by dynamic light scattering, scanning electron microscopy, Raman spectroscopy, and vibrating sample magnetometer. Magnetic nanoparticle dispersions show better results when the anionic and nonionic surfactants are used as a mixture rather than when used alone. Results of DLS showed that the semicontinuous process allowed obtaining monodisperse materials, whereas polidisperse systems are generated in batch process. Raman spectroscopy confirmed the presence of magnetite and polystyrene in the nanocomposites. PS-Fe₃O₄ nanoparticles showed superparamagnetic behavior with final magnetization of around 0.01 emu/g and low coercivity, properties that make them suitable for applications in wide fields of technology. Particle size (Dz), was lower than 300 nm in all cases. Moreover, the use of AA as stabilizer allows enhancing the PS-Fe₃O₄ composite properties. These findings showed that particle size, morphology, and agglomeration are directly influenced by the concentration and the type of surfactant employed.     

Effect of phosphorus and copper additions on the structure of Pt and Pt–Cu nanoparticles in a radiation-induced reduction method

A facile chemical process has been developed for the preparation of magnetic FeCo nanoparticles. The FeCo nanoparticles were mono-dispersed, obtained by the safe and ecofriendly method, possessed saturation magnetization up to 187 emu/g, and demonstrated excellent chemical stability. In this work, we have studied how to control Fe/Co ratio by variation of precursor ratio, and how to vary particle size from 9.3 to 12.3 nm by surfactant amount used. The cytotoxicity of as-synthesized nanoparticles was investigated after coating with the poly(methyl methacrylate-co-butyl acrylate) by the emulsion process and the results demonstrated high biocompatibility. Similarly, the same synthesis method was used with the single precursor FeO(OH) or Co₃O₄. The results showed that this method can also fabricate 10 nm mono-dispersed spherical Fe₃O₄ particles and self-assembly Co nanoneedles.     

Mössbauer and magnetic studies of MFe2O4(M = Co, Ni) nanoparticles

Nanocrystalline MFe₂O₄ (M?=?Co, Ni) particles are synthesized by citrate precursor technique. Mössbauer and magnetic studies are carried out with the CoFe₂O₄ samples having particle sizes of 9, 14 and 30 nm and the NiFe₂O₄ samples having particle sizes of 9, 21 and 30 nm. The intrinsic magnetic parameters are found to vary with the particle size. The magnetic interactions and cation distribution present in these systems influence the room temperature Mössbauer parameters. Ferrimagnetic sextets are observed for all the different particle sizes. The observed reduction of the magnetic hyperfine field values with the decrease in the size of MFe₂O₄ particles are attributed to the intrinsic size effect and the canted spin structure at the surface of the nanoparticles.     

Mössbauer study of iron oxide modified montmorillonite

Montmorillonite particles were modified by iron oxides using the precipitation process with the aim to monitor the differences in the structural and magnetic properties of intercalated and adsorbed Fe³⁺. The Mössbauer spectra recorded at 5 K in zero and 6 T external fields, IR spectra and TG curves measured in zero and 32 mT fields identified the ferrihydrite pillars in an interlayer space of the montmorillonite structure and γ-Fe₂O₃ nanoparticles adsorbed on the mineral surface. The temperature dependent Mössbauer spectra (25–300 K) reflect the superparamagnetic behaviour of maghemite nanoparticles and ferrihydrite pillars with the blocking temperatures of about 80 and 25 K, respectively.     

Microwave dielectric and magnetic properties of superparamagnetic 8-nm Fe3O4 nanoparticles

The superparamagnetic 8-nm Fe₃O₄ nanoparticles were successfully prepared by chemical oxidation process. For the complex permittivity, the dual dielectric relaxation processes have been proved by two overlapped Cole–Cole semicircles, and the natural resonance frequency is 3.03 GHz for the complex permeability. The maximum reflection loss value reaches −55.5 dB at 6.11 GHz with 3.85 mm in the thickness of the absorbers for the superparamagnetic 8-nm Fe₃O₄ nanoparticles which is better than that of 150 nm and 30 nm Fe₃O₄ nanoparticles. It is believed that the superparamagnetic 8-nm Fe₃O₄ nanoparticles can be used as a kind of candidate for microwave absorber.     

Highly Luminescent Material Based on Alq3:Ag Nanoparticles

Tris (8-hydroxyquinoline) aluminum (Alq₃) is an organic semiconductor molecule, widely used as an electron transport layer, light emitting layer in organic light-emitting diodes and a host for fluorescent and phosphorescent dyes. In this work thin films of pure and silver (Ag), cupper (Cu), terbium (Tb) doped Alq₃ nanoparticles were synthesized using the physical vapor condensation method. They were fabricated on glass substrates and characterized by X-ray diffraction, scanning electron microscope (SEM), energy dispersive spectroscopy, atomic force microscope (AFM), UV-visible absorption spectra and studied for their photoluminescence (PL) properties. SEM and AFM results show spherical nanoparticles with size around 70–80 nm. These nanoparticles have almost equal sizes and a homogeneous size distribution. The maximum absorption of Alq₃ nanoparticles is observed at 300 nm, while the surface plasmon resonant band of Ag doped sample appears at 450 nm. The PL emission spectra of Tb, Cu and Ag doped Alq₃ nanoparticles show a single broad band at around 515 nm, which is similar to that of the pure one, but with enhanced PL intensity. The sample doped with Ag at a concentration ratio of Alq₃:Ag?=?1:0.8 is found to have the highest PL intensity, which is around 2 times stronger than that of the pure one. This enhancement could be attributed to the surface plasmon resonance of Ag ions that might have increased the absorption and then the quantum yield. These remarkable result suggest that Alq₃ nanoparticles incorporated with Ag ions might be quite useful for future nano-optoelectronic devices.     

Magnetic behavior of core–shell particles

We have prepared composite magnetic core–shell particles using the process of soap-free emulsion polymerization and the co-precipitation method. The shell of the synthesized composite sphere is cobalt ferrite (CoFe₂O₄) nanoparticles and the core consists of poly(styrene-co-methacrylic acid) polymer. The mean crystallite sizes of the coated CoFe₂O₄ nanoparticles were controlled in the range of 2.4–6.7 nm by the concentration of [NH₄⁺] and heated temperature. The magnetic properties of the core–shell spherical particles can go from superparamagnetic to ferromagnetic behavior depending on the crystalline sizes of CoFe₂O₄.     

Synthesis and characteristics of multifunctional Fe3O4-SiO2-CdS magnetic-fluorescent nanocomposites

A luminescent superparamagnetic nanocomposite with an Fe 3 O 4-SiO 2-CdS structure is synthesized.Coated with a silica shell,Fe 3 O 4 nanoparticles and CdS quantum dots (QDs) are successfully assembled together.Analysed from the test results of X-ray diffraction (XRD),transmission electron microscopy (TEM),high resolution transmission electron microscopy (HRTEM),hysteresis loop,and photoluminescence (PL) spectrum,these nanocomposites exhibit superparamagnetic and photoluminescent properties.     

Single step thermal decomposition approach to prepare supported γ-Fe2O3 nanoparticles

γ-Fe₂O₃ nanoparticles supported on MgO (macro-crystalline and nanocrystalline) were prepared by an easy single step thermal decomposition method. Thermal decomposition of iron acetylacetonate in diphenyl ether, in the presence of the supports followed by calcination, leads to iron oxide nanoparticles supported on MgO. The X-ray diffraction results indicate the stability of γ-Fe₂O₃ phase on MgO (macro-crystalline and nanocrystalline) up to 1150 °C. The scanning electron microscopy images show that the supported iron oxide nanoparticles are agglomerated while the energy dispersive X-ray analysis indicates the presence of iron, magnesium and oxygen in the samples. Transmission electron microscopy images indicate the presence of smaller γ-Fe₂O₃ nanoparticles on nanocrystalline MgO. The magnetic properties of the supported magnetic nanoparticles at various calcination temperatures (350-1150 °C) were studied using a superconducting quantum interference device which indicates superparamagnetic behavior.     

Synthesis,structure, and magnetic properties of iron and nickel nanoparticles encapsulated into carbon

Nanocomposites based on iron and nickel particles encapsulated into carbon (Fe@C and Ni@C), with an average size of the metal core in the range from 5 to 20 nm and a carbon shell thickness of approximately 2 nm, have been prepared by the gas-phase synthesis method in a mixture of argon and butane. It has been found using X-ray diffraction, transmission electron microscopy, and Mössbauer spectroscopy that iron nanocomposites prepared in butane, apart from the carbon shell, contain the following phases: iron carbide (cementite), α-Fe, and γ-Fe. The phase composition of the Fe@C nanocomposite correlates with the magnetization of approximately 100 emu/g at room temperature. The replacement of butane by methane as a carbon source leads to another state of nanoparticles: no carbon coating is formed, and upon subsequent contact with air, the Fe₃O₄ oxide shell is formed on the surface of nanoparticles. Nickel-based nanocomposites prepared in butane, apart from pure nickel in the metal core, contain the supersaturated metastable solid solution Ni(C) and carbon coating. The Ni(C) solid solution can decompose both during the synthesis and upon the subsequent annealing. The completeness and degree of decomposition depend on the synthesis regime and the size of nickel nanoparticles: the smaller is the size of nanoparticles, the higher is the degree of decomposition into pure nickel and carbon. The magnetization of the Ni@C nanocomposites is determined by several contributions, for example, the contribution of the magnetic solid solution Ni(C) and the contribution of the nonmagnetic carbon coating; moreover, some contribution to the magnetization can be caused by the superparamagnetic behavior of nanoparticles.     

The double-effect mechanism between Fe3O4 nanoparticles and MSA-capped CdTe QDs

Water-soluble mercaptosuccinic acid (MSA)-capped CdTe quantum dots (QDs) of two sizes and superparamagnetic Fe₃O₄ nanoparticles have been synthesized and used to investigate the effect of the mechanism of Fe₃O₄ nanoparticles on the fluorescence intensity of QDs. In the presence of a low concentration of Fe₃O₄ nanoparticles, the CdTe QDs with smaller particle size exhibit fluorescence quenching while fluorescence enhancement of CdTe QDs with larger particle size was observed, and the fluorescence intensity changes with the excitation wavelength and the concentration of Fe₃O₄ nanoparticles. The mechanism study shows that there is a double-effect between the Fe₃O₄ and CdTe QDs: one is the fluorescence quenching effect due to Fe₃O₄ strong absorption of excitation and emission light, the other is the fluorescence enhancement effect resulting from a localized electromagnetic field caused by the absorption of exciting light. The fluorescence of CdTe QDs with lower concentration of Fe₃O₄ nanoparticles was determined via the synergy of the double-effect. To our best knowledge, this is the first systematic study on the interaction between Fe₃O₄ nanoparticles and CdTe QDs, which finds the fluorescence enhancement effect in the presence of low concentration of Fe₃O₄.