Influence of titanium dioxide nanoparticles on cadmium and lead bioaccumulations and toxicities to <Emphasis Type="Italic">Daphnia magna</Emphasis>

Titanium dioxide nanoparticles (TiO₂ NPs) have attracted considerable concerns due to the increasing production and widespread applications, while their influences on other co-existing pollutants in real environment are not well studied. In this paper, the colloidal stability of TiO₂ NPs in the exposure medium was first evaluated, and then, the medium was modified so that TiO₂ NP suspension remained stable over the exposure period. Finally, using the optimized exposure medium, the effects of cadmium (Cd) and lead (Pb) on Daphnia magna both in the absence and presence of TiO₂ NPs were investigated. Results showed that 2 mg L^?1 of TiO₂ NPs was well dispersed in 1:20 diluted Elendt M7 medium without EDTA, and no immobility was observed. The presence of the nanoparticles increased the bioaccumulation and toxicity of Cd to the daphnias. On the contrary, while Pb bioaccumulation was enhanced by three to four times, toxicity of Pb was reduced in the presence of TiO₂ NPs. The decreased toxicity of Pb was more likely attributed to the decreased bioavailability of free Pb ion due to adsorption and speciation change of Pb in the presence of TiO₂ NPs. Additionally, surface-attached TiO₂ NPs combined with adsorbed heavy metals caused adverse effects on daphnia swimming and molting behavior, which is supposed to lead to chronic toxicity.     

Aerosol characterization and lung deposition of synthesized TiO2 nanoparticles for murine inhalation studies

This study presents a novel exposure protocol for synthesized nanoparticles (NPs). NPs were synthesized in gas phase by thermal decomposition of metal alkoxide vapors in a laminar flow reactor. The exposure protocol was used to estimate the deposition fraction of titanium dioxide (TiO₂) NPs to mice lung. The experiments were conducted at aerosol mass concentrations of 0.8, 7.2, 10.0, and 28.5 mg m^?3. The means of aerosol geometric mobility diameter and aerodynamic diameter were 80 and 124 nm, and the geometric standard deviations were 1.8 and 1.7, respectively. The effective density of the particles was approximately from 1.5 to 1.7 g cm^?3. Particle concentration varied from 4 × 10⁵ cm^?3 at mass concentrations of 0.8 mg m^?3 to 12 × 10⁶ cm^?3 at 28.5 mg m^?3. Particle phase structures were 74% of anatase and 26% of brookite with respective crystallite sized of 41 and 6 nm. The brookite crystallites were approximately 100 times the size of the anatase crystallites. The TiO₂ particles were porous and highly agglomerated, with a mean primary particle size of 21 nm. The specific surface area of TiO₂ powder was 61 m² g^?1. We defined mice respiratory minute volume (RMV) value during exposure to TiO₂ aerosol. Both TiO₂ particulate matter and gaseous by-products affected respiratory parameters. The RMV values were used to quantify the deposition fraction of TiO₂ matter by using two different methods. According to individual samples, the deposition fraction was 8% on an average, and when defined from aerosol mass concentration series, it was 7%. These results show that the exposure protocol can be used to study toxicological effects of synthesized NPs.     

Electrochemical properties of TiO2 nanoparticle/nanorod composite photoanode for dye-sensitized solar cells

A unique composite of TiO₂ nanoparticles (NPs) and nanorods (NRs) has been used to fabricate a photoelectrode for developing dye-sensitized solar cells (DSSCs) with higher sensitivity. The TiO₂ nanorods were synthesized using a mechanical process, in which electrospun TiO₂ nanofibers was grinded in a controlled way to obtain uniform size distribution. The characteristics of electron transport, recombination lifetime and charge collection were investigated by intensity-modulated photocurrent spectroscopy (IMPS) and intensity-modulated photovoltage spectroscopy (IMVS). Photoelectrodes prepared with the composites of NRs and NPs showed significant improvements in electron transportation compared to only NP photoelectrodes, which would enhance the photovoltaic performance of DSSCs. IMPS and IMVS measurements show that fast electron transport and slightly decreased recombination lifetime resulted in the improvement of efficiency. The highest energy conversion efficiency obtained from the photoelectrodes fabricated with the as-prepared rutile TiO₂ nanofibers at 5 wt% NR content was up to 6.1% under AM1.5G solar illumination. The results demonstrate that the composite nanostructure can take advantage of both the fast electron transport of the nanorods and the high surface area of the nanoparticles.     

Synthesis and characterization of polypyrrole/Sn-doped TiO2 nanocomposites (NCs) as a protective pigment

We have chemically polymerized pyrrole in the presence of Sn-doped TiO₂ nanoparticles (NPs) and TiO₂ (NPs) which act as a protective pigment. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) results show a core-shell structure of pigments in which TiO₂ and Sn-doped TiO₂ NPs have a nucleus effect and caused a homogenous PPy core-shell type morphology leading to coverage of the TiO₂ and Sn-doped TiO₂ NPs by PPy deposit. The XRD results indicate that the crystalline size of polypyrrole/TiO₂ NCs and polypyrrole/Sn-doped TiO₂ NCs were approximately 93.46 ± 0.06 and 23.36 ± 0.06 nm respectively. The electrochemical impedance spectroscopy (EIS) results show that the performance of polypyrrole/Sn-doped TiO₂ NCs is better than polypyrrole/TiO₂ NCs. The results indicate that increasing the area of synthesized polypyrrole in the presence of Sn-doped TiO₂ NPs can increase its ability to interact with the ions liberated during the corrosion reaction of steel in the presence of NaCl. The UV-vis results show that the band gap of TiO₂ NPs increases with doped of Sn in lattice of TiO₂. The increase of the band gap of TiO₂ with doping of Sn can decrease the charge transfer through the coating.     

Interference of Metal Oxide Nanoparticles with Coagulation Cascade and Interaction with Blood Components

Metal oxide nanoparticles (NPs) are increasingly used for different purposes, showing a potential risk on human health. The analysis of the interaction of these metal oxide NPs with blood components is a crucial step in the characterization of their biocompatibility, but information available of comparative studies with several doses and different metal oxide NPs is really scarce. In this study, six different metal oxide NPs (TiO₂, CeO₂, Al₂O₃, Y₂O₃, and two different types of ZnO NPs) at different concentrations are used, and their potential adverse effects on blood are determined. Both, prothrombin time (PT) and activated partial thromboplastin time (aPTT), are assessed to understand particle influence on the plasma coagulation cascade. Additional hematocompatibility tests include assessment of thrombin coagulation time, platelet aggregation, leukocyte procoagulant activity (PCA), hemolysis, and complement activation. The results demonstrate that only the ZnO and TiO₂ NPs affect the coagulation cascade by increasing the aPTT in a dose‐dependent manner. Moreover, ZnO NPs increase PT, while TiO₂ NPs induce a decrease in the PT. In addition to affecting coagulation time, ZnO NPs also induce platelet aggregation and leukocyte PCA. All tested metal oxide NPs do not affect hemolysis and complement activation.     

Synthesis and characterization of poly(N-methylpyrrole)/TiO2 composites on steel

Poly(N-methyl pyrrole) coating was successfully electrodeposited on steel substrates in mixed electrolytes of dodecyl benzene sulphonic acid (DBSA) with oxalic acid in the absence and the presence of TiO₂ nanoparticles (NPs). The morphology and compositions were characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR), Energy-Dispersive X-ray spectroscopy (EDX). X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) were used to calculate the size of nanoparticles. Electrode/polymer/electrolyte system was studied by Electrochemical Impedance Spectroscopy (EIS). The FESEM micrographs suggest that the incorporation of TiO₂ nanoparticles affects the morphology of the film significantly and makes the TiO₂ to be loosely piled up with PMPy. The results of EIS showed that synthesized PMPy in the presence of TiO₂ NPs increases and decreases the R_po and C_c of the coating respectively. The increase of the area of synthesized PMPy in the presence of nanoparticles can increase its ability to interact with the ions liberated during the corrosion reaction of steel in NaCl solution.     

Characterizing the dynamic behavior of nano-TiO<Subscript>2</Subscript> agglomerates in suspensions by photocorrelation spectroscopy

Metal oxide nanoparticles are small but easily form agglomerates in suspension, depending on the strength of particle–particle and particle–media interactions. To understand the agglomeration behavior of nanoparticles in media and relate to it to product performance testing, measurement methods are desired to characterize highly scattering metal oxide nanoparticle suspensions without dilution. In this article, we describe the advantages of using photocorrelation spectroscopy (PCS) in a backscattering detection configuration to carry out a realistic agglomerate size measurement in multiple scattering media found in most metal oxide nanoparticle suspensions. The dynamic behavior of nano-titanium dioxide (TiO₂) particles in buffer solutions of different chemical composition and pH values was investigated as a sample system using PCS. The resulting autocorrelation functions (AFs) at different time intervals, particle concentrations, and pH values were measured at several detection angles. The AF exhibits a multi-mode relaxation time feature and the calculated hydrodynamic diameters strongly depended on media composition and detection angle. This result indicates that the size and dispersion of nano-TiO₂ agglomerates are significantly affected by solution media. A measurement protocol for determining size and dispersion of metal oxide particles in media is proposed and related to a performance test found in industry.     

Size characterization of metal oxide nanoparticles in commercial sunscreen products

There is an increase in the usage of engineered metal oxide (TiO₂ and ZnO) nanoparticles in commercial sunscreens due to their pleasing esthetics and greater sun protection efficiency. A number of studies have been done concerning the safety of nanoparticles in sunscreen products. In order to do the safety assessment, it is pertinent to develop novel analytical techniques to analyze these nanoparticles in commercial sunscreens. This study is focused on developing analytical techniques that can efficiently determine particle size of metal oxides present in the commercial sunscreens. To isolate the mineral UV filters from the organic matrices, specific procedures such as solvent extraction were identified. In addition, several solvents (hexane, chloroform, dichloromethane, and tetrahydrofuran) have been investigated. The solvent extraction using tetrahydrofuran worked well for all the samples investigated. The isolated nanoparticles were characterized by using several different techniques such as transmission electron microscopy, scanning electron microscopy, dynamic light scattering, differential centrifugal sedimentation, and x-ray diffraction. Elemental analysis mapping studies were performed to obtain individual chemical and morphological identities of the nanoparticles. Results from the electron microscopy techniques were compared against the bulk particle sizing techniques. All of the sunscreen products tested in this study were found to contain nanosized (≤100 nm) metal oxide particles with varied shapes and aspect ratios, and four among the 11 products were showed to have anatase TiO₂.     

Investigations of Pulse‐Plasma‐Polymer Coating on TiO2 Nanoparticles and Their Dispersion

An amorphous acrylic acid (AA) polymer coating was generated on TiO₂ nanoparticles through pulse radio frequency (RF) plasma polymerization. The AA plasma synthesis mechanism was studied by its optical emission spectrum. The chemical structures of AA–plasma‐polymer were carefully investigated by Fourier transform infrared spectroscopy (FTIR). The dispersion behaviors of AA‐coated and uncoated TiO₂ nanoparticles in glycol solution were characterized by ultraviolet absorbency and particle size distribution measurements. The results showed that the aggregation of TiO₂ nanoparticles in glycol solution was effectively lowered and the dispersion was improved a lot after AA–plasma‐polymer coating. The pulse plasma coating parameters played an important role in the dispersion enhancement of TiO₂ nanoparticles. By properly regulating the pulse discharge parameters, the system could gain the highest radical–monomer reactions rate, the most compatible functional groups on the nanoparticles, and the best dispersion in the background media.     

The dispersion study of TiO2 nanoparticles surface modified through plasma polymerization

In this study, the surface of TiO₂ nanoparticles was modified through plasma polymerization, which is a dry coating method at room temperature. The surface morphology of TiO₂ nanoparticles was characterized by high-resolution transmission electron microscope (HRTEM). The dispersion behavior of TiO₂ nanoparticles in water and ethyl glycol was investigated by laser size distribution and ultraviolet–visible absorption spectrum. TiO₂ nanoparticles were coated with a thin film through plasma polymerization, which prevents the agglomeration and improves the dispersion behavior of TiO₂ nanoparticles.     

A corrosion-resistance superhydrophobic TiO2 film

A superhydrophobic TiO₂ film with water contact angle greater than 170° on Hastelloy substrate was fabricated through simply dip-coating method from TiO₂ precursor solution containing TiO₂ nanoparticles with the average diameter 25 nm, followed by heat-treatment and modification with fluoroalkylsilane (FAS) molecules. The as-obtained sample was characterized by scanning electron microscopy (SEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), and water contact angle measurement respectively. Moreover, the dynamic light scattering (DLS) size distribution of TiO₂ aggregated particles in the TiO₂ precursor solution containing P25 particles was evaluated by Laser Particle Sizer. It is found that the TiO₂ nanoparticles in TiO₂ precursor solution play a crucial role to form high superhydrophobicity. Simultaneously, the superhydrophobic TiO₂ film still showed great superhydrophobicity after corroded with strong acid or alkali solutions and protected the substrate from corrosion which should be critical to the potential application in industry.     

Computational study on the structural and surface properties of amorphous hydroxylated TiO<Subscript>2</Subscript> spherical nanoparticles

Monte Carlo simulations were carried out on amorphous titanium dioxide (TiO₂) for both bulk and hydroxylated nanoparticles with particle sizes ranging from 1 to 10 nm. The potential developed by the Matsui and Akaogi (MA) was used to model the interatomic interactions of TiO₂ in both cases (bulk and nanoparticles). Besides, Angular and Morse potentials proposed by the Tether, Cormack, Du et. al. (TCD) were introduced to model the interactions of hydroxyl groups on the TiO₂ surfaces, i.e., the Ti-O-H groups with an experimental and theoretical angles of 125 ^o . The bulk system was developed using periodic boundary conditions. The TiO₂ nanoparticles were extracted by applying a spherical cut section in the bulk TiO₂ melt structure to obtain the required size. Free valences on the nanoparticle surfaces were saturated via additional hydroxyl groups and then quenched to 300 K under free boundary conditions. The bulk and surface properties of the nanoparticles were calculated at 300 K and zero pressure and characterized via radial distribution functions, bond angle distributions, bond distances, coordination numbers, OH group concentrations and radial density profiles. In addition, to understand the difference in properties of amorphous hydroxylated TiO₂ nanoparticles and bulk amorphous TiO₂, a comparative study was done at the same thermodynamic conditions. The study shows that the bulk properties of amorphous hydroxylated TiO₂ nanoparticles are strongly size-dependent and different from those of the bulk TiO₂. As expected, increasing the particle size leads to an approach of the particle’s bulk properties to the bulk properties of the (quasi) infinite system. The size effects show that decreasing the particle size results in increasing the surface effects and surface OH group concentrations. Accordingly, small-sized TiO₂ nanoparticles have higher surface OH group concentrations and larger surface effects than large-sized TiO₂ nanoparticles. Larger surface effects result significant changes in their bond angles, bond distances, and coordination numbers. The simulation results of the surface properties reveal that the surface titanium atoms in the TiO2 nanoparticles have the capability of accommodating up to 5 hydroxyl groups. The mean surface hydroxyl group density of the amorphous TiO₂ spherical nanoparticles is estimated to be around 8.1/nm ², which lies in the range of 8–16/nm ², found by experimental and other simulation studies. Details of the modelling, simulations results and the study are presented in this paper.     

Room‐Temperature Synthesis of High Surface Area Anatase TiO2 Exhibiting a Complete Lithium Insertion Solid Solution

The synthesis of highly divided anatase TiO₂ nanoparticles displaying 300 m² g^?1 surface area is achieved by following a two‐step synthetic process at room temperature. The particles exhibit a needle‐like morphology composed of self‐assembled 4 nm nanoparticles. The crystallization process from amorphous TiO₂.1.6H₂O to oriented aggregation of anatase TiO₂ proceeds according to a slow solid dehydration process taking place in a large range of pH in deionized water (1 < pH < 12) or alternatively when including a low amount of NH₄F_(aq) in solution. Driven by their high surface area enhancing the chemical/electrochemical reactivity, it is reported in the case of the anatase TiO₂ that a modification in the lithium insertion mechanism is no longer attributable to a two‐phase reaction between the two‐end members Li_εTiO₂ and Li_0.5±αTiO₂ when downsizing the particle size, but instead through a complete solid solution all along the composition range.     

Comparing the Contribution of Visible‐Light Irradiation,Gold Nanoparticles,and Titania Supports in Photocatalytic Nitroaromatic Coupling and Aromatic Alcohol Oxidation

Under visible‐light irradiation, gold nanoparticles (Au NPs) supported by titania (TiO₂) nanofibers show excellent activity and high selectivity for both reductive coupling of nitroaromatics to corresponding azobenzene or azoxylbenzene and selective oxidation of aromatic alcohols to corresponding aldehydes. The Au NPs act as active centers mainly due to their localized surface plasmon resonance (LSPR) effect. They can effectively couple the photonic energy and thermal energy to enhance reaction efficiency. Visible‐light irradiation has more influence on the reduction than on the oxidation, lowering the activation energy by 24.7 kJ mol^?1 and increasing the conversion rate by 88% for the reductive coupling, compared to merely 8.7 kJ mol^?1 and 46% for the oxidation. Furthermore, it is found that the conversion of nitroaromatics significantly depends on the particle size and specific surface area of supported Au NPs; and the catalyst on TiO₂(B) support outperforms that on anatase phase with preferable ability to activate oxygen. In contrast, for the selective oxidation, the effect of surface area is less prominent and Au NPs on anatase exhibit higher photo‐catalytic activity than other TiO₂ phases. The catalysts can be recovered efficiently because the Au NPs stably attach to TiO₂ supports by forming a well‐matched coherent interface observed via high‐resolution TEM.     

Biological impacts of TiO<Subscript>2</Subscript> on human lung cell lines A549 and H1299: particle size distribution effects

Increasing use of titanium dioxide (TiO₂) nanoparticles in many commercial applications has led to emerging concerns regarding the safety and environmental impact of these materials. In this study, we have investigated the biological impact of nano-TiO₂ (with particle primary size of 20 nm Aeroxide P25) on human lung cell lines in vitro and also the effect of particle size distribution on the particle uptake and apparent toxicity. The biological impact of nano-TiO₂ is shown to be influenced by the concentration and particle size distribution of the TiO₂ and the impact was shown to differ between the two cell lines (A549 and H1299) investigated herein. A549 cell line was shown to be relatively resistant to the total amount of TiO₂ particles uptaken, as measured by cell viability and metabolic assays, while H1299 had a much higher capacity to ingest TiO₂ particles and aggregates, with consequent evidence of impact at concentrations as low as 30–150 μg/mL TiO₂. Evidence gathered from this study suggests that both viability and metabolic assays (measuring metabolic and mitochondrial activities and also cellular ATP level) should be carried out collectively to gain a true assessment of the impact of exposure to TiO₂ particles.     

Sonocatalytic degradation of EDTA in the presence of Ti and Ti@TiO2 nanoparticles

The sonocatalytic degradation of EDTA (C₀ = 5 10⁻³ M) in aqueous solutions was studied under 345 kHz (P_ac = 0.25 W mL⁻¹) ultrasound at 22–51 °C, Ar/20%O₂, Ar or air, and in the presence of metallic titanium (Ti⁰) or core-shell Ti@TiO₂ nanoparticles (NPs). Ti@TiO₂ NPs have been obtained using simultaneous action of hydrothermal conditions (100–214 °C, autogenic pressure P = 1.0–19.0 bar) and 20 kHz ultrasound, called sonohydrothermal (SHT) treatment, on Ti⁰ NPs in pure water. Ti⁰ is composed of quasi-spherical particles (30–150 nm) of metallic titanium coated with a metastable titanium suboxide Ti₃O. SHT treatment at 150–214 °C leads to the oxidation of Ti₃O and partial oxidation of Ti⁰ and formation of nanocrystalline shell (10–20 nm) composed of TiO₂ anatase. It was found that Ti⁰ NPs do not exhibit catalytic activity in the absence of ultrasound. Moreover, Ti⁰ NPs remain inactive under ultrasound in the absence of oxygen. However, significant acceleration of EDTA degradation was achieved during sonication in the presence of Ti⁰ NPs and Ar/20%O₂ gas mixture. Coating of Ti⁰ with TiO₂ nanocrystalline shell reduces sonocatalytic activity. Pristine TiO₂ anatase nanoparticles do not show a sonocatalytic activity in studied system. Suggested mechanism of EDTA sonocatalytic degradation involves two reaction pathways: (i) sonochemical oxidation of EDTA by OH/HO₂ radicals in solution and (ii) EDTA oxidation at the surface of Ti⁰ NPs in the presence of oxygen activated by cavitation event. Ultrasonic activation most probably occurs due to the local heating of Ti⁰/O₂ species at cavitation bubble/solution interface.     

Advantages of NIR radiation use for optical determination of skin horny layer thickness with embedded TiO2 nanoparticles during tape stripping procedure

The tape stripping technique is an experimental method frequently used for reconstruction of the in-depth distribution of various topically administered substances within the horny layer of human skin, e.g., compounds contained in sunscreens. Titanium dioxide (TiO₂) nanoparticles (25–200 nm in diameter) are one such compound. Optical techniques which apply blue light are found to be suitable for reconstruction. However, the presence of particles affects the light propagation within the skin and therefore causes incorrect determination of strip thickness, leading to an improper reconstructed distribution of nanoparticle concentration revealed from the experimental data. This study evaluates the errors emerging from the use of blue (400 nm) and NIR (800 nm) radiation and finds the use of longer wavelength light more advantageous. Particles of different diameters are considered, and it is revealed that the application of small particles (25–60 nm) results in the lowest rate of error.     

Modernized H2S-treatment of TiO2 nanoparticles: Improving quantum-dot deposition for enhanced photocatalytic performance

One of the efficient strategies to enhance light harvesting capability of metal oxides nanoparticles (NPs) is to deposit low band gap metal sulfides on them via pseudo-successive ionic layer adsorption and reaction (p-SILAR). Resultant oxide-sulfide nanocomposites have a variety of applications, however there is still a need to increase the deposition of metal sulfide in the form of quantum-dots (QDs). In this work, we have successfully enhanced the deposition of QDs on TiO₂ NPs using a modernized H₂S-treatment strategy. A rotary reactor was employed for H₂S-treatment of TiO₂ NPs, ensuing higher deposition of PbS (in TiO₂–PbS) and CdS (in TiO₂–CdS) via p-SILAR. Resultantly, dye degradation of Rhodamine B increased from 63% to 75% and 72%–84%, respectively. X-ray photoelectron spectroscopy revealed the efficacy of modernized H₂S-treatment while intensive electrochemical characterization affirmed reduction in charge carrier transfer resistances due to superior deposition of PbS and CdS QDs on TiO₂ NPs.     

Safety Issue of Changed Nanotoxicity of Zinc Oxide Nanoparticles in the Multicomponent System

When nanomaterials are exposed to complex systems, such as food, they may cause significant changes in physical and chemical properties and even toxicity. The toxicity evaluation of complex systems is urgent. Unfortunately, so far, there is no database established about the toxicity changes of nanoparticles in composite systems. In this paper, the changes and toxicity mechanism of zinc oxide nanoparticles (ZnO NPs) in a composite system are studied. The results show that the dissolution of zinc ions (Zn²⁺) in acidic systems (vitamin C, tartaric acid, or citric acid) increases the toxicity of ZnO NPs. However, the toxicity of ZnO NPs is reduced by the complexation effect with Zn²⁺ in phosphoric acid, phosphate, and glutathione systems. The influence of titanium dioxide nanoparticles (TiO₂ NPs) on the toxicity of ZnO NPs depends on size and surface properties. In brief, the intracellular Zn²⁺ homeostasis level is the decisive factor in determining the toxicity change in complex systems. The results indicate that the toxicity changes are very different in combined systems, which may have potential food safety issues, especially for unstable nanoparticles.