Preparation and photocatalytic activity of nitrogen-doped TiO2 hollow nanospheres

TiO₂ hollow nanospheres were prepared using silicon oxide as a template. N-doped titanium oxide hollow spheres, TiO_2−xN_x were synthesized by reacting TiO₂ hollow spheres with thiourea at 500 °C. XRD and XPS data showed that oxygen was successfully substituted by nitrogen through the nitrogen-doping reaction, and finally N-doped TiO₂ hollow spheres were formed. The N-doped TiO₂ hollow spheres showed new absorption shoulder in visible light region so that they were expected to exhibit photocatalytic activity in the visible light. The photocatalytic activity of N-doped TiO₂ hollow spheres under visible light was similar to that of normal spherical TiO_2−xN_x in spite of the structural difference.     

Fabrication and characterization of photocatalytic activity of Fe3O4-doped CdS hollow spheres

A new hollow sphere photocatalyst has been fabricated by combining Fe₃O₄ with nanoparticulate CdS. Their microstructures and photocatalytic behavior were examined by X-ray powder diffraction, transmission electron microscope, scanning electron microscope and ultraviolet and visible spectroscopy. These hollow nanostructures displayed superparamagnetism at room temperature. It showed higher activity on hollow sphere than solid particle as the catalysis result.     

Synthesis of CdS hollow/solid nanospheres and their chain-structures by membrane technique

CdS hollow/solid nanospheres and their chain-structures were successfully synthesized through supporting liquid membrane (SLM) system with bio-membrane. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), UV–Vis spectroscopy, and photoluminescence (PL) spectroscopy have been used for the characterization of the products. The average diameters of CdS solid/hollow spheres are about 10, 40 nm, respectively. The wall of the hollow spheres is about 5 nm. CdS products are all cubic face-centered structure with the cell constant a = 5.830 Å. We also explore the morphology, structure and possible synthesis mechanism. A possible template mechanism has been proposed for the production of the hollow CdS nanocrystals, that is, CdS nanoparticles grow along the non-soakage interface between CHCl3 and reactant solution. During this process, the organic functional groups were crucial to the control of crystal morphologies.     

Polyacrylamide hydrogel as a template in situ synthesis of CdS nanoparticles with high photocatalytic activity and photostability

Porous polyacrylamide hydrogel (PAM) was prepared by polymerization at room temperature. Cadmium sulfide/polyacrylamide hydrogels (CdS/PAM) was synthesized by in situ loading CdS nanoparticles and used for photocatalytic decomposition of water for the first time. The size distribution of the loaded CdS nanoparticles is 3–12 nm. We studied the enhanced photocatalytic activity and photo-corrosion inhibition of CdS/PAM the compared with pure CdS and probed the mechanism of the improvement. In particular, the CdS/PAM prepared in 0.003 M CdCl₂ solution exhibited the highest hydrogen production efficiency of 2.929 mmol g^?1 h^?1, about 79 times that of pure CdS. The results demonstrate that the formation of new N–Cd bond and high transmittance of CdS/PAM dramatically enhance photocatalytic activity. The electron cloud of nitrogen atom can attract holes and repel photogenerated electrons, which lowers the carrier recombination probability. The results also reveal that the excellent hydrophilicity of hydrogel plays an important role in the inhibition of photocorrosion. In addition, CdS/PAM is easily recycled and processed. The present work will pave a good way for the application of smart hydrogels in the field of photocatalytic hydrogen production.

Open image in new window

Graphical abstract ?

     

Graphene-based hollow TiO2 composites with enhanced photocatalytic activity for removal of pollutants

Catalytically active graphene-based hollow TiO₂ composites(TiO₂/RGO) were successfully synthesized via the solvothermal method. Hollow TiO₂ microspheres are uniformly dispersed on RGO. X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (DRS) and photoluminescence (PL) were used for the characterization of prepared photocatalysts. The mass of GO was optimized in the photocatalytic removal of rhodamine B (RhB) as a model dye pollutants. The results showed that graphene-based hollow TiO₂ composites exhibit a significantly enhanced photocatalytic activity in degradation of RhB under either UV or visible light irradiation. The formation of the graphene-based hollow TiO₂ composites and the photocatalytic mechanisms under UV and visible light were also discussed.     

Influence of ammonia on the morphologies and enhanced photocatalytic activity of TiO2 micro/nanospheres

TiO₂ micro/nanospheres were synthesized by a combination process contains hydrolysis of titanium tetra-n-butyl in mixed solution of anhydrous ethanol/ammonia and the subsequent calcination under 550 °C for 7 h. The pH values of the mixed solution were tuned to be 10.4, 11.0 and 11.6, respectively, by adding different amounts of ammonia. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to characterize the morphologies and the crystallinity. X-ray diffraction (XRD) patterns indicated that pH value of the precursors has an important effect on the crystal phase composition. UV-vis diffuse reflectance spectrum was applied to characterize the optical properties of samples. Degradation of methylene blue under the irradiation of 300 W Hg lamp confirmed the enhanced photocatalytic activity of TiO₂ micro/nanospheres. In addition, the formation mechanism was proposed.     

Chitosan hydrogel films as a template for mild biosynthesis of CdS quantum dots with highly efficient photocatalytic activity

Cadmium sulfide (CdS) semiconducting quantum dots (QDs) were prepared using in situ synthesizing method in crosslinked chitosan hydrogel films under relative mild experimental conditions and characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The experimental results confirmed that crosslinked chitosan hydrogel films provided a confined matrix for CdS QDs growth in uniform size through chelation and electrostation between cadmium ions and amino groups in chitosan chains. The CdS QDs/chitosan composite films exhibited a highly efficient photocatalytic activity for decolorization of methyl orange (MO) solution under visible light irradiation. The good linearity relationship between ln (C₀/C_i) and irradiation time (t) indicated that the decolorization of MO dye under present experimental conditions followed pseudo-first-order kinetics. These results suggested that CdS QDs/chitosan composite films were suitable material for potential application in decolorization of organic dye pollutants under visible light irradiation.     

Study on the effect of different acids on the structure and photocatalytic activity of mesoporous titania

Nanocrystalline mesoporous titania was synthesized via a combined sol–gel process with surfactant-assisted templating method using cetyltrimethyl ammonium bromide (CTAB) as the structure-directing agent. The process was catalyzed by different acid (hydrochloric acid, nitric acid, sulfuric acid, or phosphoric acid). The prepared samples were characterized by XRD, TEM, BET and FT-IR. The photocatalytic activity of the samples was determined by degradation of phenol in aqueous solution. Results showed that different acid had different effect on the structure and crystal phase of the samples. The sample adjusted by phosphoric acid showed highest surface area and photocatalytic activity. The formation mechanism of the samples catalyzed by different acid was also discussed.     

Phase transition of CdS in the presence of ethylenediamine and formation of hollow CdS submicron particles with needle-like structure

Solid submicron particles, composed of amorphous, hexagonal and cubic phase CdS, were synthesized in water–ethylenediamine solution by precipitating Cd²⁺ ions with S^2? ions, which were generated from the radiolytic reduction of Na₂S₂O₃. In addition, the effects of the absorbed dose on the crystallization process of CdS were investigated in detail. Moreover, hollow CdS submicron particles with needle-like structure could be obtained from the solid CdS submicron particles probably through a hollowing process based on Ostwald ripening and the phase transition of CdS from amorphous to crystalline. In the above processes, ethylenediamine played an important role.     

Preparation, characterization and photocatalytic activity of the neodymium-doped TiO2 hollow spheres

Nd-doped titania hollow spheres were prepared using carbon spheres as template and Nd-doped titania nanoparticles as building blocks. The Nd-doped titania nanoparticles were synthesized at low temperature. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectrum (DRS). The effects of Nd content on the physical structure and photocatalytic activities of doped titania hollow sphere samples were investigated. Results showed that there was an optimal Nd-doped content (3.9 at.%) for the photocatalytic degradation of dye X-3B (C.I. Reactive Red 2). The apparent rate constant of the best one was almost 9 times as that of P25 titania. The mechanism of photocatalytic degradation of dyes under visible light irradiation was also discussed.     

Synthesis,formation mechanism and electric property of hollow InP nanospheres

The present work reports on novel four-layer thermally driven piezoresistive cantilevers implemented in one- and two-dimensional arrays for parallel proximity scanning. There, the heater (metallic meander), the piezoresistive deflection sensor, and the metal actuation film with significantly higher thermal expansion coefficient make up separate layers. Actuation efficiency and cross-talk of the novel cantilever design are studied and compared with two recent designs: thin metallic film and ion-implanted heater. The novel actuator, integrated on a 240 μm long and 3 μm thick silicon cantilever and supplied by V _dc=1 V enables deflections up to 5 μm of the AFM-tip with an actuation efficiency of about 170 nm/mW and suppressed cross-talk between actuator and sensor.     

Investigation of crystal structure and new ellipsometric properties of hexagonal CdS epilayers

High quality hexagonal CdS epilayer was grown on GaAs (1 1 1) substrates by the hot-wall epitaxy method. The crystal structure of the grown CdS epilayers was confirmed to be the hexagonal structure by X-ray diffraction pattern and scanning electron microscopy image. The optical properties of the hexagonal CdS epilayers were investigated in a wide photon energy range between 2.0 and 8.5 eV using spectroscopic ellipsometry (SE) at room temperature. The data obtained by SE were analyzed to find the critical points of the pseudodielectric function spectra, 〈?(E)〉 = 〈?₁(E)〉 + i〈?₂(E)〉, such as E₀, E_1A, E_1B, E^0′, F₁, and two E₂ structures. In addition, the second derivative spectra, d²?(E)/dE², of the pseudodielectric function of hexagonal CdS epilayers were numerically calculated to determine the critical structures. Four structures, such as E^0′F₁, and two E₂ structures, from 6.0 eV to 8.0 eV were observed, for the first time, at 300 K by ellipsometric measurements for the hexagonal CdS epilayers.     

Electronic band structure, optical absorption, and photocatalytic activity of iron-doped anatase

Quasi-one-dimensional solid solutions of the composition Ti_{1 ? x} Fe _x O_{2 ? x/2} (0.005 ≤ x ≤ 0.050) with the anatase-type structure and extended aggregates have been prepared by the precursor method. The absorption spectra of the solid solutions have been investigated in the ultraviolet and visible regions, and the photocatalytic activity in the oxidation reaction of hydroquinone in water has been estimated. It has been found that the synthesized solid solutions serve as photocatalysts only under ultraviolet irradiation, and their photoactivity increases with an increase in the dopant concentration. The first-principles calculations of the electronic band structure and optical absorption in iron-doped anatase and rutile have been performed using the pseudopotential method LSDA + U (with the VASP software package). The on-site exchange-correlation parameters have been calibrated in the calculations of the electronic band structure of hematite α-Fe₂O₃ and ilmenite FeTiO₃. It has been shown that, despite the appearance of impurity states within the band gap of anatase and rutile, doping with iron does not cause substantial absorption in the visible region, which correlates with the increase in photocatalytic activity only under ultraviolet irradiation. The most probable cause of the experimentally observed absorption in the visible region is the presence of finely dispersed hematite impurities in the obtained samples.     

工作压强对空心玻璃微球表面形貌和性能的影响

采用化学气相沉积-氧化烧结法,在不同工作压强条件下,制备了惯性约束聚变靶用空心玻璃微球（HGM）。利用扫描电子显微镜、原子力显微镜、VMR显微镜系统和能谱仪对HGM的表面形貌、球形度、壁厚均匀性以及成分进行了表征。分析了工作压强对HGM表面形貌、球形度、壁厚均匀性和成分的影响以及相互关系。研究表明：HGM的表面形貌随工作压强的增大而变得平滑致密,表面均方根粗糙度逐渐减小。随工作压强增大,HGM的球形度没有发生明显变化,而壁厚均匀性得到不断提高,微球中C元素浓度逐渐降低,Si元素浓度不断升高,O元素浓度基本保持不变。     

Influence of silver doping on the photocatalytic activity of titania films

By means of X-ray diffraction, BET nitrogen adsorption, UV-Vis-NIR transmission spectroscopy, transmission electron microscope, scanning electron microscope, X-ray photoelectron spectroscopy and photodegradation of methylene blue, effects of Ag doping on the microstructure and photocatalytic activity of TiO₂ films prepared by sol–gel method were studied. It is found that with a suitable amount (2–4 mol%), the Ag dopant increases the photocatalytic activity of TiO₂ films. The mechanism can be attributed to that (1) anatase grain sizes decrease with Ag doping and the specific surface areas of doped TiO₂ films increase, the charge transfer in TiO₂ films is promoted; (2) by enhancing the electron–hole pairs separation and inhibiting their recombination, the Ag dopant enhances the charge pair separation efficiency for doped TiO₂ films.     

Sunlight photocatalytic activity of CdS modified TiO2 loaded on activated carbon fibers

To improve the photocatalytic application performances of TiO₂, in this work, firstly CdS modified Degussa P25 TiO₂ (CdS/TiO₂) composites were prepared by two methods, sol-gel method and precipitation method. Next they, sol-gel-CdS/TiO₂ (sg-CdS/TiO₂) and precipitation-CdS/TiO₂ (pp-CdS/TiO₂), were loaded on activated carbon fibers (ACFs) by dip-coating method using the sodium carboxymethyl cellulose as adhesives. The composites were characterized by XRD, UV-vis absorbance spectra, SEM, EDS and BET. The photocatalytic activities under sunlight were investigated by the degradation of methylene blue. The results showed that CdS/TiO₂ composites were mainly composed of anatase-TiO₂ and little CdS cubic phases. The absorption wavelengths of sg-CdS/TiO₂ and pp-CdS/TiO₂ composites were extended to 590 nm and 740 nm, respectively. The absorption edge had a pronounced ‘red shift’. From EDS analysis, the elemental contents of CdS/TiO₂ were mainly Ti and O and a small quantity of S and Cd. CdS/TiO₂ loaded on ACFs were in the form of small clusters, but not very uniform; compared with the original ACFs, the surface area and pore volume of CdS/TiO₂/ACFs decreased slightly, respectively, while the average pore diameter was not changed. The photodegradation rate of methylene blue under sunlight with CdS/TiO₂/ACFs composites was markedly higher than that of P25-TiO₂/ACFs, and the effect of pp-CdS/TiO₂/ACFs composites was better than that of sg-CdS/TiO₂/ACFs, when irradiated for 180 min, and the photodegradation rate of methylene blue reached to 90.1%. The photodegradation kinetics of the methylene blue fitted with the Langmuir-Hinshelwood equation. The apparent reaction rate constants of sg-CdS/TiO₂/ACFs and pp-CdS/TiO₂ were 0.0105 min⁻¹ and 0.0146 min⁻¹, respectively, which were about 1.3-1.7 times as large as that of P25-TiO₂/ACFs.     

Preparation of Ni-doped carbon nanospheres with different surface chemistry and controlled pore structure

In classic carbon supports is very difficult to control pore size, pore size distribution, and surface chemical properties at the same time. In this work microporous carbons derived from furfuryl alcohol are used as support to prepare Ni-doped carbon materials. The N₂ flow rate used during the carbonisation process of the precursor influences on the size of the nanospheres obtained but not in their textural properties. Microporous carbon nanospheres have been synthesised with a narrow pore size distribution centred in 5.5 Å. The surface chemistry of these materials can be easily modified by different treatments without detriment of the pore structure of the doped carbon nanospheres.     

Photocatalytic action of cerium molybdate and iron-titanium oxide hollow nanospheres on Escherichia coli

Novel hierarchical architectures of Sb₂WO₆ are synthesized successfully by a simple hydrothermal process without any organic solvent or surfactant. The physicochemical properties of the as-prepared products are characterized in detail. Interestingly, the morphologies of Sb₂WO₆ could be selectively controlled by adjusting pH values of the reactive solutions. The tuft-like, cockscomb-like, and flower-like hierarchical architectures are obtained at pH = 1, 3, and 5, respectively. Based on the time-dependent experimental results, a possible growth mechanism is proposed, which reasonably follows a synergy interaction of reaction–crystallization and dissolution–recrystallization processes. The photocatalytic activities of the novel hierarchical Sb₂WO₆ are evaluated by the decomposition of azo compounds for the first time. Results show that the as-prepared samples exhibit the excellent photocatalytic activity and universality for the reduction of azo compounds. The conversion of methyl orange reaches 98 % after 140 min of light irradiation. HPLC–MS indicates that the selectivity of 4-aminobenzene sulfonic acid is over 99 %.     

A new simple synthesis of CdS nano-particles by composite-molten-salt method and their high photocatalytic degradation activity

Nano-CdS crystal has been succesfully synthesized by composite molten salt (CMS) method for the first time, using composite molten salt as a reaction solvent, sodium sulfide and cadmium nitrate hexahydrate as reactants at temperature of 200 °C for 24 h in the absence of organic dispersant or capping agents. X-ray diffraction and field emission scanning electron microscopy (FESEM) images indicated that the as-synthesized product were well crystallized and belonged to nano-scale. Their UV–vis absorption spectrum demonstrated a band gap of 2.49 eV corresponding to the absorption edge of 499 nm. The experimental result of photocatalytic degradation on methyl orange by the nano-CdS showed much better photocatalysis than that by the commercial CdS powder under the irradiation of ultraviolet light source.     

Preparation and characterization of hollow TiO2 nanospheres: The effect of Fe3+ doping on their microstructure and electronic structure

Hollow Fe-doped TiO₂ spheres with various Fe dopant concentrations, 0.25, 0.50 and 1.0 wt%, were synthesized via a hydrothermal method using carbon spheres as templates. The prepared samples were calcined in air at temperatures of 500 and 550 °C for 3 h and characterized using XRD, SEM, TEM, SAED, EDX, XPS and UV–vis spectroscopy. The analytical results showed that the presence of a very low concentration of Fe³⁺ incorporated into hollow nanoporous TiO₂ spheres inhibited the growth of nanocrystals as well as the anatase to rutile phase transformation inside the anatase TiO₂ lattice. Doping with 1.0 wt% Fe³⁺ resulted in a reduction of the TiO₂ sphere diameter from 205.71 ± 25.29 nm to 68.70 ± 7.07 nm. The optical energy gap of the samples was determined from UV–Vis absorption spectra. The results showed that the absorption edge of TiO₂@Fe was shifted toward the visible light region with increased Fe content.