基于石墨烯的太赫兹器件研究进展

石墨烯是一种零带隙二维的半导体材料, 具有极高的载流子迁移率, 优异的机械、电学、热学和光学等性能. 在太赫兹辐射源、调制器和探测器件的研究中, 石墨烯材料具有独特的优势. 本文以石墨烯材料在太赫兹辐射源、调制器以及探测器等器件方面的应用为主, 综述了石墨烯太赫兹器件的最新研究进展.     

石墨烯太赫兹波动态调制的研究进展

石墨烯是一种有着独特电学和光学性质的二维材料,近年来在太赫兹波动态调制的研究中有着广泛的应用。本文主要对基于石墨烯的太赫兹波动态调制器件进行了综述,分析了电调制、光调制和光电混合调制3种调制方法的原理和优缺点,介绍了近几年来将石墨烯应用于太赫兹波动态调制所取得的一系列科研成果,着重对不同器件的调制性能进行了对比,分析了优势和不足。石墨烯可调超材料为实现更快速、高效的太赫兹调制器件提供了新的思路。     

基于超材料的偏振不敏感太赫兹宽带吸波体设计

本文设计了一种基于超材料的偏振不敏感太赫兹宽带吸波体.吸波体包含两层金属和一层中间介质,表面金属层每一个周期单元由五种尺寸接近的金属块按照相邻不同的规律排列成5×5的方形阵列.各种尺寸金属块分别产生单峰谐振吸收,五个谐振吸收峰相互靠近从而产生宽带吸收.通过研究吸波体表面电流和电场z分量分布情况可知,入射太赫兹能量的吸收主要是由y方向上电场引起的电偶极子振荡和z方向上磁场引起的磁极化产生,而且金属层的欧姆损耗起主要作用.仿真结果表明,吸波体吸收率在80%以上的带宽约为1.2 THz,最高吸收率可达98.7%,半峰全宽(FWHM)为1.6 THz,该宽带吸波体的厚度约为中心波长的二十分之一,对偏振方向不敏感,且能实现大角度吸收,在太赫兹频段的电磁隐身、测辐射热探测器以及宽带通信等领域有潜在的应用价值.     

基于石墨烯和二氧化钒的太赫兹宽带可调谐超材料吸收器

太赫兹超材料吸收器作为一种重要的太赫兹功能器件,被广泛应用于生物医学传感、电磁隐身、军用雷达等多个领域.但这种传统的超材料吸收器结构具有可调谐性差、功能单一、性能指标不足等缺点,已经无法满足复杂多变的电磁环境的要求,因此可调谐超材料吸收器逐渐成为了太赫兹功能器件领域的研究热点.为实现超材料吸收器吸收特性的调谐,通常从调...     

基于石墨烯的太赫兹波散射可调谐超表面

设计了一个可调谐的太赫兹超表面,由在随机反射超表面基底中嵌入可偏置的双层石墨烯构成,可以实现对太赫兹波散射特性的动态调控.全波仿真试验结果证实了所预期的超表面散射可调性能.通过增大偏置电压提升石墨烯的费米能级,使得该超表面的太赫兹波散射样式从漫反射逐渐向镜面反射过渡,从而实现散射特性的连续调控,且该超表面具有对电磁波极化角度不敏感的特点.这些特性使得该超表面能很好地融合到变化的环境中,在太赫兹隐身方面具有潜在的应用价值.     

基于石墨烯的可调谐太赫兹光子晶体结构

本文将石墨烯引入到常规光子晶体中构建一种新型光子晶体, 首次从理论上严格导出了决定其能带结构的色散关系, 由于色散关系中石墨烯电导率的存在导致了它具有与常规光子晶体有所不同的特殊光学性质, 我们发现, 随着费米能增大, 低频段能带迅速向高频移动, 而高频段能带移动缓慢, 导致了常规光子晶体没有的能带压缩现象的发生, 究其原因在于石墨烯在低频段电导率迅速变化, 而高频段电导率变化缓慢, 导致能带向高频压缩, 使得光波原先允许频率变成禁止传播, 而禁止频率变成允许传播.     

基于石墨烯的光学控制窄带太赫兹开关

本文提出了一种光控太赫兹开关,该开关采用覆盖单层石墨烯的十字金属谐振器超表面。利用石墨烯表面电导率模型和有限元法计算了这种复合结构的光谱特性。模拟结果表明,在0.2 W/mm²的光泵浦后,传输谱（调制深度为36.8%,Q-因子为250）出现了窄带共振衰减现象。另外,这种衰减的调制深度可以通过改变泵浦强度微调节。因此,光学可调谐太赫兹开关的设计将有助于太赫兹通信应用的功能组件开发。     

石墨烯与太赫兹科学

石墨烯（Graphene）是材料科学和物理科学领域一颗冉冉升起的新星.作为一种具有优异晶体品质和电子性质的二维材料,石墨烯表现出独特的电子输运、光学耦合、电磁学和其他新奇的性质.例如,石墨烯的禁带宽度和有效质量为零,其电子和空穴的运动方式与相对论性粒子相同.另外,石墨烯拥有已知材料中最高的迁移率,且其迁移率基本与温度无关.石墨烯具有众多的新颖物理现象和应用潜能,其中在太赫兹科学上的应用前景尤其广阔.石墨烯的等离子振荡、可外部控制的导电率及可人为调谐的禁带宽度都与太赫兹科学息息相关.文章重点地介绍了石墨烯的     

石墨烯与太赫兹科学

石墨烯(Graphene)是材料科学和物理科学领域一颗冉冉升起的新星.作为一种具有优异晶体品质和电子性质的二维材料,石墨烯表现出独特的电子输运、光学耦合、电磁学和其他新奇的性质.例如,石墨烯的禁带宽度和有效质量为零,其电子和空穴的运动方式与相对论性粒子相同,另外,石墨烯拥有已知材料中最高的迁移率,且其迁移率基本与温度无关,石墨烯具有众多的新颖物理现象和应用潜能,其中在太赫兹科学上的应用前景尤其广阔.石墨烯的等离子振荡、可外部控制的导电率及可人为调谐的禁带宽度都与太赫兹科学息息相关.文章重点地介绍了石墨烯的基本性质和最新研究进展,并展望了石墨烯在太赫兹科学上的应用前景,包括石墨烯的太赫兹特性研究及石墨烯太赫兹器件.     

太赫兹波大气传输衰减模型

基于修正的Van-Vleck Weisskopf线型、辐射传输色散理论和水汽连续体吸收模型,结合HITRAN数据库,建立了太赫兹波大气传输衰减模型VVWH,形成了对宽频太赫兹波在真实大气中水平传输衰减的数值模拟能力。同时对太赫兹时域光谱技术（THz-TDS）获取的透射光谱实测数据进行了对比分析。计算结果与实验结果总体变化趋势一致,在吸收谱线处两者吻合良好,但在低频的大气窗口区,实验结果相比计算呈现出更强的传输衰减。考察了相对湿度对太赫兹波大气传输衰减特性的影响变化。     

Enhanced spatial terahertz modulation based on graphene metamaterial

The plasmonic mode in graphene metamaterial provides a new approach to manipulate terahertz(THz) waves.Graphene-based split ring resonator(SRR) metamaterial is proposed with the capacity for modulating transmitted THz waves under normal and oblique incidence. Here, we theoretically demonstrate that the resonant strength of the dipolar mode can be significantly enhanced by enlarging the arm-width of the SRR and by stacking graphene layers. The principal mechanism of light–matter interaction in graphene metamaterial provides a dynamical modulation based on the controllable graphene Fermi level. This graphene-based design paves the way for a myriad of important THz applications, such as optical modulators, absorbers, polarizers, etc.     

Room-temperature terahertz detection based on CVD graphene transistor

We report the fabrication and characterization of a single-layer graphene field-effect terahertz detector, which is coupled with dipole-like antennas based on the self-mixing detector model. The graphene is grown by chemical vapor deposition and then transferred onto an Si O2/Si substrate. We demonstrate room-temperature detection at 237 GHz. The detector could offer a voltage responsivity of 0.1 V/W and a noise equivalent power of 207 n W/Hz1/2. Our modeling indicates that the observed photovoltage in the p-type gated channel can be well fit by the self-mixing theory. A different photoresponse other than self-mixing may apply for the n-type gated channel.     

Dual-function terahertz metasurface based on vanadium dioxide and graphene

A dual-function terahertz metasurface based on VO₂ and graphene is proposed in this paper. It consists of a gold layer embedded with VO₂ patches, a SiO₂ spacer layer, a VO₂ layer, graphene and a SiO₂ spacer substrate. When the bottom VO₂ layer is in the metallic state, the designed metasurface can achieve absorption. When the top VO₂ patches are in the metallic state, the proposed metasurface can be used as a single-band absorber with terahertz absorptance of 99.7% at 0.736 THz. When the top VO₂ patches are in the insulating state, the designed structure behaves as a dual-band absorber with an absorptance of 98.9% at 0.894 THz and 99.9% at 1.408 THz. In addition, the absorber is polarization insensitive and keeps good performance at large angles of incidence. When the bottom VO₂ is in an insulating state, the metasurface shows electromagnetically induced transparency. The transparent window can be dynamically regulated by controlling the chemical potential of graphene. The proposed metasurface exhibits the advantages of terahertz absorption, electromagnetically induced transparency and dynamic control, which provides more options for the design of terahertz devices in the future.     

Tunable multi-band terahertz absorber based on graphene nano-ribbon metamaterial

The tunable multi-band selective absorption effect with graphene nano-ribbon metamaterial is investigated. It is achieved by depositing a set of graphene nano-ribbons on a dielectric spacer backed with a metallic mirror. A dual-band and tri-band absorbers are designed to illustrate such multi-band selective absorption behavior. The designed graphene absorbers exhibit near-unity absorption at multiple resonance frequencies, which is attributed to the plasmonic resonance of graphene nano-ribbons with different widths. Moreover, the multiple resonance wavelengths can be tuned in a wide frequency range by changing the Fermi energy and the absorbers possess large angle insensitivity. Last, a Fabry-Perot model is employed to give a physical understanding of such multi-band selective absorption effect. It is believed that the conclusions may be useful for designing of next-generation graphene-based optoelectronic devices.     

基于石墨烯互补超表面的可调谐太赫兹吸波体

通过在石墨烯超表面设计周期性切条,实现了基于石墨烯互补超表面的可调谐太赫兹吸波体.通过改变外加电压来改变石墨烯的费米能级,吸波体实现频率可调谐特性.研究了石墨烯费米能级、结构尺寸对超材料吸波体吸收特性的影响,并利用多重反射理论研究了其物理机理并且证明了模拟方法的可行性.研究结果表明:当石墨烯费米能级取0.6 eV,基底厚度13μm,石墨烯上切条长宽分别为2.9μm,0.1μm时,吸波体在1.865 THz可以实现99.9%的完美吸收;石墨烯费米能级从0.4 eV增大到0.9 eV,吸波体共振频率从1.596 THz蓝移到2.168 THz,且伴随共振吸收率的改变,吸收率在0.6 eV时达到最大;通过改变费米能级实现的最大吸收率调制度达84.55%.     

Ultrasensitive terahertz/infrared waveguide modulators based on multilayer graphene metamaterials

This paper studies and classifies the electromagnetic regimes of multilayer graphene‐dielectric artificial metamaterials in the terahertz/infrared range. The employment of such composites for waveguide‐integrated modulators is analysed and three examples of novel tunable devices are presented. The first one is a modulator with excellent ON‐state transmission and very high modulation depth: >38 dB at 70 meV graphene's electrochemical potential (Fermi energy) change. The second one is a modulator with extreme sensitivity towards graphene's Fermi energy ‐ a minute 1 meV variation of the latter leads to >13.2 dB modulation depth. The third one is a tunable waveguide‐based passband filter. The narrow‐band cut‐off conditions around the ON‐state allow the latter to shift its central frequency by 1.25% per every meV graphene's Fermi energy change.     

基于石墨烯编码超构材料的太赫兹波束多功能动态调控

提出了一种基于石墨烯带的太赫兹波段的1 bit编码超构材料,可以实现太赫兹波束的数目、频率、幅度等参数多功能动态调控.该结构由金属薄膜、聚酰亚胺、硅、二氧化硅、石墨烯带组成.通过对石墨烯带施加两种不同的电压,可以实现一定频率范围内相位差接近180?的"0"和"1"数字编码单元,进而构成1 bit动态可控的编码超构材料.全波仿真结果表明,不同序列的编码超构材料能够实现波束数目从单波束、双波束、多波束到宽波束的调控.相同序列的编码超构材料,通过施加石墨烯带的不同电压能够实现宽频段波束频率的偏移.对于000000或者111111周期序列的编码超构材料,通过施加石墨烯带的不同电压还能够实现波束幅度的调控.因此这种基于石墨烯带的编码超构材料为灵活调控太赫兹波提供了一种新的途径,将在雷达隐身、成像、宽带通信等方面具有重要的意义.