预镀铋膜修饰铂电极差分脉冲溶出伏安法测定痕量铅、镉

采用预镀铋膜法修饰铂电极,用该电极对痕量Pd、Cd同时进行了差分脉冲溶出伏安法测定,Pd、Cd在富集中和铋形成类似于汞齐的合金,溶出峰良好。讨论了在不同沉积液和沉积时间下得到的铋膜电极的性能和富集时间、富集电位及底液pH对金属离子测定的影响。在优化的实验条件下,分别对10~100μg/L、20~200μg/L和50~500μg/L3个不同浓度系列的Pb2 、Cd2 进行了同时测定,Pb、Cd溶出峰电流与Pb2 、Cd2 浓度呈良好的线性关系(r≥0.999),Pb2 、Cd2 浓度的线性范围均为10~500μg/L;富集时间为180 s时,Pb2 、Cd2 的检出限分别为0.38μg/L和0.82μg/L。利用本方法测定了蔬菜中Pb的含量,并与原子荧光分析法做了对比,结果令人满意。     

预镀铋膜修饰碳糊电极差分脉冲伏安法测定废水中铅和镉

采用预镀铋膜法制得铋膜修饰碳糊电极,当沉积时间为540s得到最优铋膜。采用差分脉冲伏安法(DPV)实现了对痕量Pb2+、Cd2+的同时测定。优化了DPV测定条件,当富集时间为150s、富集电位为-1.25V、HAc-NaAc缓冲底液的pH为4.5时,Pb2+、Cd2+的峰电流最大。在最优的实验条件下,Pb2+和Cd2+的峰电流与其浓度呈良好的线性关系,线性相关系数R分别为0.9912和0.9937,线性范围分别为1~10μmol/L和5~50μmol/L,Pb2+和Cd2+的检出限分别为0.32μmol/L和2.01μmol/L。对实际废水样品进行了加标回收实验,其中Pb2+和Cd2+的回收率分别为98.4%~102.6%和95.4%~104.6%。     

石墨烯/铋复合膜修饰玻碳电极检测板蓝根中的铅和镉

采用滴涂法制备石墨烯(GR)修饰的玻碳电极(GCE),通过电化学富集Bi沉积在GR表面,得到GR/Bi-GCE修饰电极.用方波溶出伏安法研究了Cd2+和Pb2+在GR/Bi-GCE上的电化学行为.在0.1 mol/LpH 4.5的醋酸缓冲溶液中,在-1.1 V富集0.5 mg/L Bi(NO3)3溶液210 s后,溶出峰电流与Cd2+和Pb2+的浓度在0.01～85.0 μmol/L范围内呈良好的线性关系,检出限均为0.003 μmol/L.实验结果表明,此修饰电极对Cd2+和Pb2+均有较好的电化学活性,可对两种物质实现同时测定,具有较高的灵敏度和稳定性.将此电极用于板蓝根中Cd2+和Pb2+的含量测定,结果令人满意.     

铋膜修饰玻碳电极伏安法测定微量铅(Ⅱ)

以铋膜修饰玻碳电极为工作电极,采用阳极溶出伏安法对微量Pb(Ⅱ)进行测定。考察了铋离子浓度、支持电解质pH、沉积时间等因素对测定的影响。实验结果表明,铋膜修饰电极对痕量Pb(Ⅱ)具有良好的电化学响应。在实验选定条件下,Pb(Ⅱ)在10～260!g/L范围内与峰电流呈良好的线性关系,检出限为1.98!g/L。用同一支铋膜电极对50!g/L Pb(Ⅱ)平行测定10次,相对标准偏差(RSD)为2.82%。该电极可应用于井水中铅的测定。     

以镍铬合金为基体的铋膜电极的构建及其应用

采用循环伏安法以镍铬合金为基体构建了铋膜/镍铬合金电极,以扫描电镜表征其表面形貌,利用线性扫描伏安法研究了Pb(II)、Cd(II)在该电极上电化学行为。结果表明:在0.20 mol/L HAc-NaAc缓冲溶液(pH4.5)中,该电极对Pb(II)、Cd(II)离子有较好的电催化活性,Pb(II)、Cd(II)的阳极溶出峰电流与其浓度分别呈良好的线性关系,检出限分别为6.39μg/L和3.52μg/L。     

锑电极电位溶出法测定锌、镉、铅

提出了采用锑电极作为工作电极同时测定痕量重金属锌、镉、铅的电位溶出法。探讨了同时测定锌、镉、铅的最佳条件。在pH=5.0的HAc-NaAc缓冲溶液中,Zn2+、Cd2+、Pb2+分别在-1.07、-0.70、-0.52 V得到灵敏的电位溶出峰。沉积时间为60 s时,锌、镉、铅的质量浓度分别在0~16.0、0~1.6、0~0.08 μg/mL范围内,与各自微分电位溶出峰高呈线性关系,检出限分别为4.0、0.3、0.03 μg/L。测定了水样中痕量锌、镉、铅的含量,结果令人满意。     

基于脱氢枞胺基希夫碱-多壁碳纳米管修饰电极测定铅

采用脱氢枞胺基希夫碱和多壁碳纳米管复合材料修饰玻碳电极,以循环伏安法和示差脉冲阳极溶出伏安法研究此修饰电极的导电性能,及Pb2+在此电极上的电化学行为。结果表明,修饰电极在0.2 mol/L HAc-NaAc缓冲体系(pH 5.5)中,于!1.1 V下沉积250 s,Pb2+在1.0×10!8~1.0×10!6mol/L范围内与溶出峰电流呈良好的线性关系,线性回归方程为I(μA)=6.6173C(μmol/L)+0.2597(R=0.9971),检出限为5.0×10!9mol/L(S/N=3)。将此修饰电极用于水样品中Pb2+检测,结果令人满意。本方法操作简便,耗时短,具有很好的准确性、灵敏度和选择性,实现了水样中低浓度铅的准确、快速测定。     

基于溶出伏安法的铋微阵列电极检测饮料中的铅和镉

建立了基于溶出伏安法的铋微阵列电极检测饮料中重金属的方法。该传感器采用三电极体系,铋微阵列电极为工作电极,铂薄膜电极为对电极,Ag/AgCl电极为参比电极。铋是一种低毒的重金属,采用铋作为反应物质可以使检测过程更加安全。微阵列电极具有高通量测定、便于微型化、抗干扰性等优点。实验表明,该传感器可同时检测出Pb2+和Cd2+,检出限分别为0.067和0.064 mg/L,且具有很好的重复性。此传感器用于检测橙汁中的Pb2+和Cd2+,结果令人满意。     

基于纳米金修饰的两种无汞型重金属微传感器的对比研究

采用微加工技术制备了集成有工作电极和对电极的两种重金属微传感电极芯片,工作电极表面采用电沉积法修饰纳米金(Gold nanoparticles,GNPs),由半胱氨酸(L-cysteine,Cys)和天冬氨酸(L-aspartic acid,Asp)修饰制备Asp/Cys/GNPs/微传感电极芯片,并利用原位镀锡膜(Sn film)的方法,制成Sn/GNPs/微传感电极芯片。采用方波伏安法和方波溶出伏安法考察了两种微传感电极芯片对重金属离子Cu2+,Pb2+和Zn2+的响应特性。Asp/Cys/GNPs/微传感电极芯片可有效识别Cu2+和Pb2+,线性范围为5～2000μg/L,检出限为1μg/L;Sn/GNPs/微传感电极芯片可有效识别Cu2+,Pb2+和Zn2+,线性检测范围分别为5～500μg/L,5～500μg/L和10～500μg/L,检出限分别为2,3和5μg/L。相比而言,Asp/Cys/GNPs/微传感电极芯片具有较宽的检测范围,而Sn/AuNPs/微传感电极芯片具有较高的灵敏度,两种传感器绿色环保、制备简单、更新简便、易于集成,在水质在线监测方面具有应用前景。     

复合铋膜电极阳极溶出法测定水样中的痕量铟

在玻碳电极上采用电化学沉积法制备了新型铕离子掺杂普鲁士蓝复合铋膜电极,建立了用示差脉冲阳极溶出法测定环境水样中痕量铟的分析方法。讨论了铟在常规铋膜电极和复合铋膜电极上的溶出性能,对铋膜的厚度、支持电解质、测定底液的pH、富集时间和富集电位等参数进行了优化。在最佳实验条件下,铟的阳极溶出峰电流与其浓度在2~20μg/L和20~100μg/L范围内分别呈良好的线性关系,检测下限为0.15μg/L(S/N=3),相对标准偏差RSD2.0%。该法用于实际水样中痕量铟的测定,样品回收率为97.5%~103%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.