GC-MS/MS法对焙烤食品及其塑料包装材料中25种磷酸三酯类与邻苯二甲酸酯类化合物的同时测定

建立了气相色谱-质谱/质谱(GC-MS/MS)测定焙烤食品及其塑料包装材料中25种磷酸三酯类及邻苯二甲酸酯类化合物的高通量检测方法。焙烤食品以乙腈-丙酮(8∶2,体积比)超声提取,采用50 mg C18和50 mg PSA混合填料进行Qu ECh ERS净化;塑料包装材料经二氯甲烷-甲醇超声提取后直接检测。样液经DB-5 ms色谱柱分离,选择反应监测(SRM)模式测定。25种化合物在各自线性范围内的相关系数不小于0.997 5,方法检出限为10~500μg/kg,平均回收率为80.2%~119.6%,相对标准偏差(n=6)为1.5%~9.4%。该方法操作简单,净化效果好,可有效消除基质效应,适用于不同焙烤食品及其塑料包装材料中磷酸三酯类及邻苯二甲酸酯类化合物的同时测定。     

色谱-质谱联用技术测定化妆品中25种邻苯二甲酸酯

建立了乳液、霜、水以及油类化妆品中25种邻苯二甲酸酯类化合物的气相色谱-质谱和液相色谱-质谱测定方法。不同基质样品经不同方法净化处理后,采用气相色谱-质谱或液相色谱-质谱进行测定。气相色谱-质谱法采用DB-5MS毛细管色谱柱(30 m,250 mm×0.25μm),程序升温,选择离子模式同时测定21种邻苯二甲酸酯类化合物。液相色谱-质谱采用MN EC-C18色谱柱(4.6×100 mm,2.7μm),以甲醇和0.1%甲酸为流动相,梯度洗脱,流速0.7 mL/min,采用电喷雾电离(ESI+),多反应监测(MRM)模式同时测定24种邻苯二甲酸酯类化合物。25种邻苯二甲酸酯类化合物的线性关系良好,相关系数均大于0.999,回收率实验结果为89.3%~105.6%,RSD为0.4%~4.0%,检出限均小于0.3 mg/kg。方法适用于化妆品中邻苯二甲酸酯类化合物的全面筛查。     

同位素稀释-固相萃取-LC/MS/MS法测定婴幼儿配方食品中双酚类化合物

建立了同位素稀释-固相萃取-高效液相色谱-串联质谱法同时测定婴幼儿配方食品中14种双酚类化合物的方法。婴幼儿配方乳粉、婴幼儿配方谷粉和婴幼儿辅食果泥等试样经乙腈提取,ProElut PLS 固相萃取小柱(500 mg/6 mL)净化,14种双酚类化合物经Waters Atlantis T3色谱柱(150 mm ×2.1 mm,3.0μm)分离后,正负离子同时扫描模式下多反应监测( MRM),基质匹配BPA-d16、TBBPA-d10和BPS-c13同位素内标法定量。结果表明,在线性范围内,14种双酚类化合物线性相关系数( r)均大于0.999,回收率为83.0%~107.1%(n=6),相对标准偏差(RSD)为5.1%~9.8%(n=6),方法的定量限(LOQ)为1.0~2.0μg/kg,检出限(LOD)为0.3~0.7μg/kg。方法操作简单、高效、重现性好,满足现行法规要求的同时,实现了婴幼儿食品中双酚类化合物的定性定量检测。     

气相色谱-质谱法测定化妆品中13种防晒剂

防晒剂广泛应用于化妆品中,是目前化妆品监管的重点。建立了同时测定化妆品中13种防晒剂的气相色谱-质谱(GC-MS)方法。化妆品样品经二氯甲烷提取后,涡旋超声后稀释。采用程序升温模式,经HP-5ms毛细管色谱柱(30 m×250 μm×0.25 μm)在30 min内对13种防晒剂实现分离,经电子轰击(EI)源电离后采用选择离子监测模式(SIM)扫描测定,外标法定量。比较了6种常用有机溶剂的基质效应和平均回收率,二氯甲烷的基质效应弱,平均回收率较高。13种防晒剂在相应的线性范围内线性关系良好,相关系数均大于0.998,检出限(LOD, S/N=3)为0.04~0.63 mg/g,定量限(LOQ, S/N=10)为0.12~2.10 mg/g。实验选取了两种基质,在3个水平下验证方法的回收率和精密度,13种防晒剂在霜类基质中的加标回收率为88.7%~103.6%,相对标准偏差(RSD, n=6)为1.7%~4.9%,在乳类基质中的加标回收率为88.4%~102.3%, RSD(n=6)为1.2%~3.9%。美白类化妆品常添加防晒剂成分,为监管盲区,采用该方法检测了5批含有防晒剂的美白类化妆品,其所含5种防晒剂的含量为0.8%~5.2%,符合相关要求。该方法操作简单,灵敏度高,回收率好,测定的13种防晒剂均为我国《化妆品安全技术规范》2015版规定的常用的限用组分,可以用于各类化妆品中13种防晒剂的定性定量测定,为市场监管和实验室检测提供新的技术支持。     

同位素稀释高分辨气相色谱-高分辨质谱法测定土壤中痕量有机氯农药残留

建立了同位素稀释高分辨气相色谱-高分辨质谱测定土壤中痕量有机氯农药残留的分析方法。采用加速溶剂法萃取土壤样品,以正己烷/丙酮(体积比为1:1)为提取溶剂,提取液经过Florisil硅土固相萃取小柱净化后,采用高分辨DB-5MS毛细管色谱柱(30 m×0.25 mm×0.25 μm)分离,以保留时间和同位素特征离子丰度比定性,同位素峰面积比定量。实验结果表明,方法的回收率为77.3%～114.5%,相对标准偏差(RSD)≤10.81%（n=5）,检出限均小于0.04 pg/g。应用该方法检测某地区表层土壤中的有机氯农药,结果表明该方法适合测定环境土壤背景中痕量有机氯残留。     

气相色谱-串联质谱同位素内标法测定中草药中124种农药及其代谢物残留

建立测定中草药中124种农药及其代谢物残留的气相色谱-串联质谱(GC-MS-MS)方法。采用同位素内标法,样品经乙腈提取,采用混合型固相分散萃取剂净化,加入分析保护剂校正基质效应。色谱柱为DB-5MS(30 m×0.25 mm×0.25μm),程序升温,GC-MS-MS测定。124种农药残留在0.005~0.40μg/m L内呈线性关系,在0.06~0.3 mg/kg内的平均回收率为84.8%~108.7%,RSD为2.1%~12%,方法检出限(LOD)为0.005~0.013 mg/kg。该方法适合于中草药中农药多残留的同时检测。     

超声萃取-气相色谱-质谱法测定土壤中13种苯胺类化合物

建立超声萃取气相色谱质谱法测定土壤中13种苯胺类化合物的方法.采用正己烷-丙酮混合液(体积比为1:1)为萃取溶剂,以氟罗里硅土柱净化,经DB-5MS色谱柱(30 m×0.25 mm,0.25μm)分离,选择离子扫描模式监测,内标法定量.13种苯胺类化合物的质量浓度与色谱峰面积具有良好的线性关系,相关系数均大于0.996...     

分散固相萃取净化/液相色谱-串联质谱法测定化妆品中7种氨基苯甲醚

建立了同时测定化妆品中7种氨基苯甲醚类化合物(邻氨基苯甲醚、间氨基苯甲醚、对氨基苯甲醚、2,4-二氨基苯甲醚、2,5-二氨基苯甲醚、3,4-二氨基苯甲醚、3,3'-二甲氧基联苯胺)的分散固相萃取净化液相色谱-串联质谱(LC-MS/MS)分析方法。样品用甲醇-水(1∶1,含0.1%甲酸)溶液提取,经PSA分散固相萃取净化后,样液经Welch Ultimats XB-C_(18)(4.6 mm×150 mm,5μm)色谱柱分离,多反应监测(MRM)模式检测,以保留时间和特征离子对定性,外标法定量。结果表明,7种氨基苯甲醚类化合物在0.10~200.0μg/L浓度范围内线性关系良好,相关系数均大于0.998;方法检出限(S/N=3)为0.4~10.9μg/kg。样品日内回收率为64.7%~98.1%,相对标准偏差(RSD,n=6)为1.2%~10.6%;日间精密度(n=5)为2.3%~9.8%。对30个不同水剂类化妆品检测发现,其中1个样品检出3,3'-二甲氧基联苯胺,含量为5.3μg/kg。该方法准确可靠,适用于化妆品中7种氨基苯甲醚的同时测定。     

固相萃取-同位素稀释-气相色谱-串联质谱法测定化妆品中的二甲苯麝香

建立了测定化妆品中二甲苯麝香的固相萃取-同位素稀释-气相色谱-串联质谱分析方法.膏霜、水剂、散粉、香波、唇膏等不同类型的化妆品样品加入甲醇经超声提取后,样品提取液高速离心处理,浓缩上清液,以Sep-Pak Silica固相萃取柱净化,收集二氯甲烷洗脱液,DB-5 MS(30 m × 0.25 mm, 0.25 μm)石英毛细管色谱柱分离后经NCI-GC-MS/MS多反应监测技术进行定性及定量分析.二甲苯麝香的方法定量限为5 μg/kg,在5～50 μg/kg范围内的3个添加水平的平均回收率为81.1%～86.9%,日内精密度均小于10%,日间精密度均小于12%.本方法准确、快速、灵敏度高,可用于化妆品的实际检验工作.     

分散固相萃取净化/气相色谱-质谱联用法同时测定祛痘类化妆品中的3种禁用杀菌剂

建立了祛痘类化妆品中百菌清、腈菌唑、敌菌丹3种禁用杀菌剂的气相色谱-质谱分析方法。水剂类试样直接以甲醇提取并经无水硫酸钠脱水;乳液、膏霜类试样依次经氯化钠破乳、甲醇提取、无水硫酸钠脱水、分散固相萃取净化后,采用HP-5MS(30 m×0.25 mm×0.25μm)石英毛细管气相色谱柱分离,以特征质谱碎片进行定性,外标法定量。在优化实验条件下,化妆品试样中百菌清、腈菌唑及敌菌丹在各自线性范围内呈良好线性关系,相关系数(r2)不小于0.997,方法的检出限分别为0.1,0.2,0.01 mg/kg,定量下限分别为0.2,0.5,0.02 mg/kg,在低、中、高3个加标水平下,平均回收率(n=6)为80.5%~111.3%,相对标准偏差(RSD)为1.8%~10.3%。该方法准确、可靠、简便、灵敏,能够为祛痘类化妆品的检验工作和日常生产质量控制提供科学依据和技术支持。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.