Synthesis and characterization of polymer/clay nanocomposites by intercalated chain transfer agent

In situ synthesis of poly(methyl methacrylate) (PMMA) and polystyrene (PS) nanocomposites by free radical polymerization using intercalated chain transfer agent (I-CTA) in the layers of montmorillonite (MMT) clay is reported. MMT clay was ion-exchanged with diethyl octyl ammonium ethylmercaptan bromide, which acts both as suitable intercalant and as chain transfer agent. These modified clays were then dispersed in methyl methacrylate (MMA) or styrene (St) monomers in different loading degrees to carry out the in situ free radical polymerization. The intercalation ability of the chain transfer agent and exfoliated nanocomposite structure were evidenced by both X-ray diffraction spectroscopy (XRD) and transmission electron microscopy (TEM). Thermal properties and morphologies of the resultant nanocomposites were also studied.     

Characterization of HDPE /Polyamide 6/ Nanocomposites Using Scanning-and Transmission Electron Microscopy

Summary: Preparation and morphology of high density polyethylene (HDPE)/ polyamide 6 (PA 6)/modified clay nanocomposites were studied. The ability of PA 6 in dispersing clays was used to prepare modified delaminated clays, which were then mixed with HDPE. Mixing was performed using melt processing in a torque rheometer equipped with roller rotors. After etching the materials with boiling toluene and formic acid at room temperature, the morphology was examined by SEM analyses, showing that the PA 6 formed the continuous phase and HDPE the dispersed phase. X-ray diffraction patterns show that the (001) peak of the clay is dramatically decreased and shifted to lower angles, indicating that intercalated/exfoliated nanocomposites are obtained. TEM analyses confirmed the typical structure of exfoliated nanocomposites. A scheme for the mechanism of exfoliation and/or intercalation of these HDPE /PA 6/ /organoclay nanocomposites is proposed.     

Mechanism of carbon nanotube dispersion and precipitation during treatment with poly(acrylic acid)

Carbon nanotubes have been shown to be easily dispersed within an acidic aqueous solution of poly(acrylic acid) but precipitate when the pH is increased. Transmission electron microscopy showed that the nanotubes were more exfoliated under the acidic condition but highly aggregated under the basic condition. Carbon K‐edge NEXAFS spectroscopy showed that the carbon nanotubes did not chemically react with poly(acrylic acid) during the dispersion or precipitation and that the dispersion mainly involved physical adsorption of poly(acrylic acid) onto the nanotubes. Together with the carbon K‐edge NEXAFS spectra, the cobalt L_{3, 2}‐edge NEXAFS spectra suggested that under the basic condition, the cobalt impurity within the nanotubes strongly reacted with poly(acrylic acid) resulting in complex formation. Cobalt reduces the adsorption of poly(acrylic acid) onto the nanotubes, which then reduced the nanotube dispersion and resulted in the precipitation. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(acrylic acid‐co‐acrylamide)/hydrotalcite nanocomposite hydrogels for carbonic anhydrase immobilization

To combine the advantages of a biopolymer with hydrotalcite in an enzyme immobilization system, the intercalation polymerization was used to prepare poly(acrylic acid‐co‐acrylamide)/hydrotalcite (PAA‐AAm/HT) nanocomposite hydrogels using sodium methyl allyl sulfonate as intercalation agent. Transmission electron microscopy, X‐ray diffraction, and Fourier transform infrared spectroscopy results revealed that sodium methyl allyl sulfonate chains entered into the interlayer of HT, the interaction between them has taken place, and HT was dramatically exfoliated into nanoscale and homogeneously dispersed in the PAA‐AAm matrix. Transmission electron microscopy and cryo scanning electron microscope results showed that dried hydrogels were regular spherical particles, and swollen hydrogels revealed homogeneous porous network structures. Then, PAA‐AAm/HT nanocomposite hydrogels were used to immobilize carbonic anhydrase (CA), and the CO₂ hydration activities of free enzyme and immobilized enzyme were evaluated. Results showed that immobilized CA retained the majority of the enzyme activity. The reason may be the formation of a microenvironment almost all of which is composed of free water inside the porous network structures. Therefore, the immobilized CA is of great potential in the removal of trace CO₂ from the closed spaces. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3232–3240, 2009     

Pervaporation and properties of chitosan-poly(acrylic acid) complex membranes

Polyelectrolyte complex membranes between chitosan as a cationic polyelectrolyte and poly(acrylic acid) as an anionic species were prepared by blending two polymer solutions in different ratio. Characterization of chitosan-poly(acrylic acid) complex membrane was investigated by Fourier transform-infrared (FT-IR), wide angle X-ray diffractometer, dielectric analyzer. Their mechanical properties were studied by universal testing machine. The swelling of polyelectrolyte membranes was studied. Thermal properties of polyelectrolyte membranes from chitosan and poly(acrylic acid) by varying blend ratios showed a shift in transition temperatures of polyelectrolyte complexes. Polyelectrolyte complex membranes from chitosan and poly(acrylic acid) had pH sensitive characteristics as determined by FT-IR studies and swelling behaviors. Pervaporation performances were investigated with various organic mixtures; water-ethanol, water-isopropanol, methanol-methyl t-butyl ether mixtures. An increase of poly(acrylic acid) content in the polyelectrolyte complex membranes affected the swelling behavior and pervaporation performance of water-ethanol mixture. Permeation flux decreased and the water concentration in the permeate was close to 100% upon increasing the feed alcohol concentration.     

Sacrificial adhesion promotion layers for copper metallization of device structures

The adhesion of copper films to adjacent device layers including TiN, Ta, and TaN diffusion barriers is a crucial reliability issue for integrated circuits. We report that ultrathin layers of poly(acrylic acid) (PAA) prepared on barrier surfaces or on the native oxide of Si wafers dramatically increase the interfacial adhesion of Cu films deposited by the H2 assisted reduction of bis(2,2,7-trimethyloctane-3,5-dionato)copper in supercritical carbon dioxide. Similar improvements were achieved on Si wafers using a simple vapor phase exposure of the substrate to acrylic acid prior to metallization. The deposited films and the substrate/Cu interfaces were analyzed by X-ray photoelectron spectroscopy (XPS), electron microscopy, atomic force microscopy, and variable-angle spectroscopic ellipsometry. No trace of the adhesion layer was detected at the interface, indicating it was sacrificial at the deposition conditions used. Moreover, the presence and subsequent decomposition of the PAA layer during deposition substantially reduced or eliminated metal oxides at the substrate interface. For depositions on PAA-treated Si wafers, copper was present primarily as Cu0 at the interface and Si was present only as Si0. On PAA-treated Ta substrates, XPS analysis indicated Ta was present primarily as Ta0 at the metallized interface whereas Ta2O5 dominated the interface of samples prepared without the adhesion layers. The technique can be extended to patterned substrates using adsorption of acrylic acid or thermal/UV polymerization of acrylic acid.     

Electrochemical and spectroscopic characterization of quinone functionalized exfoliated graphite.

Natural graphite was exfoliated by thermal decomposition of graphite-bisulfate intercalation compound. Oxidative/reductive pre-treatment of exfoliated graphite was subsequently carried out to introduce various functional groups on the graphite surface. The resulting material was covalently modified with redox active quinones. The covalent modification was effected through oxygen containing functional groups formed on the graphite surface. The modified exfoliated graphite was characterized by infra-red (FTIR) and X-ray photoelectron spectroscopy (XPS). Electrochemical characterization of the pressed pellets of the modified graphite showed that the modification occurred at the edge sites. These electrodes were found to be very stable and the surface renewal was simply accomplished by polishing the surface using SiC emery sheets. Application of the benzoquinone modified electrode for the electrocatalysis of ascorbic acid oxidation was demonstrated.     

The effect of organic modifiers with different chain lengths on the dispersion of clay layers in HTPB (hydroxyl terminated polybutadiene)

The series of HTPB (hydroxyl terminated polybutadiene)/organoclay nanocomposite was formed by melt blending with rotationary and revolutionary mixer which generated high shear stress. Organoclays were formed by modifying the pristine clays with organic modifiers which had different hydrophobic chain lengths. As the length of organic modifier increased, the gap size between layers of organoclay became broader. The clays modified with octadecylamine (C18) and dodecyl amine (C12) showed wider gap sizes than that modified with octyl amine (C8). This gap size affected the dispersion state of clays, exfoliation/intercalation in HTPB polymer medium. The mixtures of HTPB with C18 and C12 were transparent without sedimentation and showed almost exfoliated structure. HTPB/C18 mixture showed the higher viscosity and yield strength than HTPB/C12 due to exfoliation. HTPB/C12 showed more elastic behavior than HTPB/C18 mixture because the organoclay C12 had less content of organic modifier.     

Encapsulation of aluminum flakes with hybrid silica/poly(acrylic acid) nanolayers by combination of sol–gel and in situ polymerization methods: a corrosion behavior study

A combination of sol–gel method and in situ polymerization was used to form a hybrid silica/poly(acrylic acid) nanolayer for the corrosion protection of aluminum pigments. To this end, the pigment particles were first coated with a silica layer by sol–gel method. Tetraethylorthosilicate was used as a precursor and during a condensation reaction, an inorganic silica layer was formed. Then, 3-methacryloxypropyltrimethoxysilane was attached on the surface and in situ polymerization of acrylic acid (AA), as a hydrophile monomer, was performed. The obtained Al/Si/PAA flakes were characterized by different methods such as Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and transmission electron microscopy (TEM). The attached PAA chains on the surface were deattached by HF aqueous solution and analyzed by gel permeation chromatography. Also, the surface energy of samples was measured using Owens and Wendt equation by means of contact angle data. As results, the characterizing tests approved the successful encapsulation of Al pigments and TEM image showed a 10–15 nm silica layer and a 20–25 nm PAA layer. Although the Al/Si pigments showed a quantity of evolved hydrogen, the hybrid coated pigments had excellent anticorrosive properties in acidic and alkaline solutions. Also, the surface free energy of Al/Si/PAA showed an increase compared to that of Al.     

Assembly of nanotubes of poly(4-vinylpyridine) and poly(acrylic acid) through hydrogen bonding

Nanotubes of poly(4-vinylpyridine) (PVP) and poly(acrylic acid) (PAA) were fabricated by hydrogen bonding based on layer-by-layer (LbL) assembly. The uniform and flexible tubular structures were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). FTIR and X-ray photoelectron spectroscopy (XPS) measurements confirm the formation of hydrogen bonds in the assembled nanotubes. PAA can be released from the assembled PAA/PVP nanotubes in a basic aqueous solution to give the walls of the tubes a porous structure. Such assembled nanotubes can be considered as carriers for catalysts or drugs, especially in aqueous solution against capillary force.     

Polyelectrolyte complex layers: a promising concept for anti-fouling coatings verified by in-situ ATR-FTIR spectroscopy

In-situ attenuated total reflection (ATR)-FTIR spectroscopy enabled studies on the interaction between the differently charged model proteins human serum albumin, lysozyme, immunoglobulin G and multilayer assemblies, which were deposited by alternating adsorption of poly(ethyleneimine) and poly(acrylic acid) onto Si crystals. Low adsorbed protein amounts were observed if the top polyelectrolyte layer and the protein were equally charged, whereas enhanced protein adsorption occurred for electrostatic attraction between protein and top polyelectrolyte layer.     

FT-IR and FT-Raman spectroscopic investigations of adsorption of 2,2′-biquinoline by smectite group clay minerals from Anatolia

The sorption of 2,2′-biquinoline onto natural and ion-exchanged montmorillonite (Fe-, Co- or Cu-montmorillonite) and saponite from Anatolia have been investigated using FT-IR and FT-Raman Spectrometry. The intercalation of 2,2′-biquinoline within natural and ion-exchanged montmorillonite and saponite has been shown by X-ray diffraction to increase the interlayer spacing. The difference of basal spacing of air-dried clays and biquinoline treated ones shows monolayer arrangement. Raman spectroscopy was particularly useful for investigation of clay-organic interaction. Vibrational spectroscopy indicates that intercalated 2,2′-biquinoline molecules are coordinated to exchangeable cations (directly and indirectly through water bridges) and/or Lewis acid sites or as bidentate ligand.     

Sol‐gel transition behavior of amphiphilic comb‐like poly[(PEG‐b‐PLGA)acrylate] block copolymers

The effects of comb‐like amphiphilic block copolymer architectures on the physical properties such as sol‐gel transition and micellization behaviors with the change of temperature and pH were examined. Comb‐like poly((poly(ethylene glycol)‐b‐(poly(lactic acid‐co‐glycolic acid))acrylate‐co‐acrylic acid) (poly((PEG‐b‐PLGA)A‐co‐AA)) copolymers were synthesized by coupling of poly(acrylic acid) (PAA) with two different kinds of PEG‐b‐PLGA diblock copolymers to investigate the effects of the number of branches and hydrophilicity/hydrophobicity on the sol‐gel transition and micellization. The molecular weights and chemical structures were confirmed by GPC and ¹H NMR. The number of PEG‐b‐PLGA branches was gradually deviated from the feed molar ratio with increasing the molecular weight and the number of branches and due to the bulkiness of PEG‐b‐PLGA. Poly[(PEG‐b‐PLGA)A‐co‐AA] aqueous solutions showed thermosensitive sol‐gel transition behavior, and the gelation took place at lower concentration with increasing the number of branches and PLGA chain length due to the increase of hydrophobicity. The temperature, at which abrupt increase of viscosity by dynamic rheometer appeared, was also in good agreement with sol‐gel transition by tube‐titling method. The CMC, calculated from UV‐Visible spectroscopy using DPH as hydrophobic dye, also decreased with increasing the number of PEG‐b‐PLGA branches and PLGA chain length with same reason. The micelle size was increased with increasing temperature at the initial stage, however, decreased with further increase of temperature, since the micelles were, first, aggregated by hydrophobic intermolecular interaction, and then fragmented by dehydration of PEG segments with increasing temperature. PH‐sensitive PAA backbone played a key role in physical properties. With decreasing pH, sol‐to‐gel transition temperature, CMC values, and micelle size were decreased because of the increase of hydrophobicity resulting form non‐ionized acrylic acid. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1287–1297, 2010     

A study on the intercalation and exfoliation of illite

Illite particles were exfoliated from the illite-organics intercalation precursor in the ultrasound process. Four intercalating agents (glycerol, hydrazine hydrate, dimethyl sulfoxide, and urea) were selected to study the intercalation reaction for purified illite, thermal activated illite, and acidified illite and to prepare different illite-organics intercalation complexes. The resulting intercalation complexes and exfoliated illite were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), the zeta potential test, the particle size test and thermogravimetry analysis (TG). XRD results showed that the thermal activation and subsequent acidification treatment to exchange K⁺ in the interlayer of illite with H⁺ is a necessary condition for organic intercalation. FTIR and TG analysis confirmed the intercalation of four intercalating agents into the interlayer of illite. During the high-temperature ultrasonic treatment, the organic molecules were deintercalated from the interlayers of illite-organics intercalation complexes, leading to the separation of the illite layers. The d₀₀₁ diffraction of illite in XRD patterns became broad and weak after ultrasonic treatment; this indicated the random orientation of illite platelets. Particle size analysis showed the exfoliated illite (IUE) from the illite-urea intercalation complex possessed the smaller particle diameter. SEM and TEM observation showed the particle size of IUE is 0.5–4 μm with a layer thickness of approximately 200–300 nm. Moreover, the exfoliation of illite layers exposed more internal layers with negative charge, leading to the decrease of zeta potential.     

Dependence of Temperature-Sensitivity of Poly(N-isopropylacrylamide-co-acrylic acid) Hydrogel Microspheres upon Their Sizes

Monodisperse poly(N-isopropylacrylamide-co-acrylic acid) hydrogel microspheres were prepared by a membrane emulsification method using membranes of pore diameters of 0.33, 0.73, 1.15, and 1.70 μm. The hydrogels were synthesized by polymerization of 3.6 M N-isopropylacrylamide (N-IPAAm or NIPAM) and 0.4 M acrylic acid (AAc). Their surface properties were studied by measuring the electrophoretic mobility of the microspheres in electrolyte solutions at pH 7.4 at 25, 30, 33, 35, 40, and 45 degrees C. Poly(N-IPAAm-co-AAc) microspheres have shown negative mobility. More negative values of electrophoretic mobility were obtained with the smaller microspheres than the larger ones at each temperature. The surface charge density of the microspheres increased and their surfaces became harder above 35 degrees C, since the microspheres contained thermosensitive poly(N-IPAAm) moiety and LCST increased by the addition of AAc, while that of poly(N-IPAAm) was 33 degrees C. It has recently been found that the smaller microspheres exhibit the stronger dependence of both surface charge density and softness on the temperature. Copyright 2000 Academic Press.     

A new approach for the fabrication of an alternating multilayer film of poly(4-vinylpyridine) and poly(acrylic acid) based on hydrogen bonding

A new approach for the fabrication of a multilayer film assembly is explored, which is based on the alternating assembling of poly(4-vinylpyridine) and poly(acrylic acid) via hydrogen bonding. The homogeneous multilayer films were characterized by UV-Vis, X-ray diffraction and atomic force microscopy (AFM) measurements. The nature of interaction between the two polymers is identified as hydrogen bonding by IR spectroscopy.     

Nanocomposites with Biodegradable Polycaprolactone Matrix

Summary: Biodegradable polymer/clay nanocomposites and/or composites based on poly(ε-polycaprolactone) (PCL) were prepared by conventional melt mixing. Three kinds of clays, organomodified Cloisite 15A and Cloisite 10A with different ammonium cations located in the silicate gallery and unmodified Cloisite with Na cations were used for composites preparation. The degree of dispersion of silicate layers in the matrix was determined by X-ray diffraction and transmission electron microscopy. Oscillatory rheological measurements were used for characterization of the physical network formed by the filler. The presence of intercalated and exfoliated structures were observed for the composites PCL/Cloisite 15A and PCL/Cloisite 10A, indicating that nanocomposite structure was formed. Changes of viscoelastic properties to more solid-like behavior, especially in the low frequency range were explained by formation of silicate network structure, which can be detected by modified Cole-Cole plots.     

Hydrogels based on polycarboxylic acid-agar-agar complexes

IR spectroscopy and viscometry data have shown that poly(acrylic acid) and poly(methacrylic acid) form complexes with agar-agar in aqueous solutions as they do with other polysaccharides. The polyacid-agar-agar complexes are typical hydrogels. The swelling index of hydrogels based on the poly(methacrylic acid)-agar-agar complex has been found to be markedly lower than that of poly(acrylic acid)-agaragar complex. The hydrogels based on the complex of cross-linked poly(acrylic acid) with agar-agar can be of practical interest as polymeric carriers for drugs.     

Natural rubber/clay nanocomposites: Influence of poly(ethylene glycol) on the silicate dispersion and local chain order of rubber network

A novel preparation of natural rubber (NR)/Na⁺-montmorillonite (MMT) nanocomposites in only one step by using poly(ethylene glycol) (PEG) has been investigated. PEG behaves as dispersing agent favouring the intercalation of rubber chains into the silicate galleries and providing substantially improved clay dispersion. Intercalated/exfoliated miscible hybrids were observed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The influence of PEG on the network structure has also been evaluated by static proton double-quantum nuclear magnetic resonance spectroscopy (¹H DQ NMR) at low-field. Silicate nanoparticles with a high aspect ratio (clay tactoids) and a more crosslinked rubber network have been obtained for an optimum PEG/MMT ratio. Both effects were responsible of the enhancement on mechanical properties.     

Thermosensitive copolymer coatings with enhanced wettability switching

Expanded cross-linked copolymers of poly(N-isopropylacrylamide) (PNiPAAm) and poly(acrylic acid) (PAAc) of varying monomer ratios were grafted from a crystalline silicon surface. Surface-tethered polymerization was performed at a slightly basic pH, where electrostatic repulsion among acrylic acid monomer units forces the network into an expanded polymer conformation. The influence of this expanded conformation on switchability between a hydrophilic and a hydrophobic state was investigated. Characterization of the copolymer coating was carried out by means of X-ray photoelectron spectroscopy (XPS) ellipsometry, and diffuse reflectance IR. Lower critical solution temperatures (LCSTs) of the copolymer grafts on the silicon surfaces were determined by spectrophotometry. Temperature-induced wettability changes were studied using sessile drop contact angle measurements. The surface topography was investigated by atomic force microscopy (AFM) in Milli-Q water at 25 and 40 degrees C. The reversible attachment of a fluorescently labeled model protein was studied as a function of temperature using a fluorescence microscope and a fluorescence spectrometer. Maximum switching in terms of the contact angle change around the LCST was observed at a ratio of 36:1 PNiPAAm to PAAc. The enhanced control of biointerfaces achieved by these coatings may find applications in biomaterials, biochips, drug delivery, and microfluidics.