Stepwise formation of "organometallic boxes" with half-sandwich Ir, Rh and Ru fragments

Octanuclear complexes with half-sandwich Ir, Rh and Ru fragments and tetra(4-pyridyl)porphyrin (L1) and oxalate (L2) spacer ligands [(Cp*M)4L1]2[L2]4 (M = Ir (6a) M = Rh (6b)), [((cymene)Ru)4(L1)]2[L2]4 were prepared and characterized.     

Synthesis and characterization of half-sandwich Rh, Ir complexes containing mono-thiolate-ortho-carborane ligand

Two binuclear complexes [Cp^∗M(Cl)Carb^S]₂ (Cp^∗ = η⁵-C₅Me₅, M = Rh (1a), Carb^S = SC₂(H)B₁₀H₁₀, Ir (1b)) were synthesized by the reaction of LiCarb^S with the dimeric metal complexes [Cp^∗MCl(μ-Cl)]₂ (M = Rh, Ir). Four mononuclear complexes Cp^∗M(Cl)(L)Carb^S (L = BuⁿPPh₂, M = Rh (2a), Ir (2b); L = PPh₃, M = Rh (4a), Ir (4b)) were synthesized by reactions of 1a or 1b with L (L = BuⁿPPh₂ (2); PPh₃ (4)) in moderate yields, respectively. Complexes 3a, 3b, 5a, 5b were obtained by treatment of 2a, 2b, 4a, 4b with AgPF₆ in high yields, respectively. All of these compounds were fully characterized by IR, NMR, and elemental analysis, and the crystal structures of 1a, 1b, 2a, 2b, 4a, 4b were also confirmed by X-ray crystallography. Their structures showed 3a, 3b and 5a, 5b could be expected as good candidates for heterolytic dihydrogen activation. Preliminary experiments on the dihydrogen activation driven by these half-sandwich Rh, Ir complexes were done under mild conditions.     

Pt-tetraethynylethene molecular scaffolding: synthesis and characterization of a novel class of organometallic molecular rods

The series of monodisperse Pt-bridged TEE oligomers 3a-f was prepared by oxidative Glaser-Hay oligomerization of monomer 7 under end-capping conditions. These novel molecular rods extend in length from 3.3 nm (monomeric 3a) to 12.1 nm (hexameric 3 f). Their isolation was achieved by high performance gel permeation chromatography (GPC), and their purification was best monitored by analytical GPC in combination with matrix-assisted laser-desorption-ionization mass spectrometry (MALDI-TOF MS). The mass spectra of each oligomer revealed the molecular ion or its sodium complex as parent ion together with a clean, highly characteristic fragmentation pattern. Delayed addition of the end-capping reagent PhC(triple bond)CH to the oligomerization mixture afforded polymer 10 with an average of approximately 32 repeat units and a remarkably narrow molecular weight distribution (Mw/Mn=1.06), which is indicative of a living polymerization process. UV/Vis spectral data as well as measurements of the second hyperpolarizability gamma by third harmonic generation (THG) revealed a nearly complete lack of pi-electron delocalization along the oligomeric backbone. The Pt atoms act as true insulating centers, and the Pt-C(sp) bonds hardly possess any pi character. The synthesis of the molecular rods 3a-f provides another demonstration of the power of oxidative acetylenic homocouplings for the preparation of unusual nanoarchitecture.     

Versatile reactivity of half-sandwich Ir and Rh complexes toward carboranylamidinates and their derivatives: synthesis, structure, and catalytic activity for norbornene polymerization

Synthesis, structure, and reactivity of carboranylamidinate‐based half‐sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ‐Cl)Cl}₂] (M=Ir, Rh; Cp*=η⁵‐C₅Me₅) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18‐electron complexes [Cp*IrCl(Cab^N‐DIC)] ( 1 a ; Cab^N‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHiPr)]), [Cp*RhCl(Cab^N‐DIC)] ( 1 b ), and [Cp*RhCl(Cab^N‐DCC)] ( 1 c ; Cab^N‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHCy)]). A series of 16‐electron half‐sandwich Ir and Rh complexes [Cp*Ir(Cab^N′‐DIC)] ( 2 a ; Cab^N′‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NiPr)]), [Cp*Ir(Cab^N′‐DCC)] ( 2 b , Cab^N′‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NCy)]), and [Cp*Rh(Cab^N′‐DIC)] ( 2 c ) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab^N,S‐DIC)], [Cp*M(Cab^N,S‐DCC)] (M=Ir 3 a , 3 b ; Rh 3 c , 3 d ), formed through BH activation, are obtained by reaction of [{Cp*MCl₂}₂] with carboranylamidinate sulfides [RN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHR)]S^? (R=iPr, Cy), which can be prepared by inserting sulfur into the C? Li bond of lithium carboranylamidinates. Iridium complex 1 a shows catalytic activities of up to 2.69×10⁶ g_PNB ${{\rm{mol}}_{{\rm{Ir}}}^{ - {\rm{1}}} }Synthesis, structure, and reactivity of carboranylamidinate-based half-sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ-Cl)Cl}(2)] (M = Ir, Rh; Cp* = η(5)-C(5)Me(5)) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18-electron complexes [Cp*IrCl(Cab(N)-DIC)] (1?a; Cab(N)-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NHiPr)]), [Cp*RhCl(Cab(N)-DIC)] (1?b), and [Cp*RhCl(Cab(N)-DCC)] (1?c; Cab(N)-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10))(NHCy)]). A series of 16-electron half-sandwich Ir and Rh complexes [Cp*Ir(Cab(N')-DIC)] (2?a; Cab(N')-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NiPr)]), [Cp*Ir(Cab(N')-DCC)] (2?b, Cab(N')-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10)(NCy)]), and [Cp*Rh(Cab(N')-DIC)] (2?c) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab(N,S)-DIC)], [Cp*M(Cab(N,S)-DCC)] (M = Ir 3?a, 3?b; Rh 3?c, 3?d), formed through BH activation, are obtained by reaction of [{Cp*MCl(2)}(2)] with carboranylamidinate sulfides [RN=C(closo-1,2-C(2)B(10)H(10))(NHR)]S(-) (R = iPr, Cy), which can be prepared by inserting sulfur into the C-Li bond of lithium carboranylamidinates. Iridium complex 1?a shows catalytic activities of up to 2.69×10(6) g(PNB) mol(Ir)(-1) h(-1) for the polymerization of norbornene in the presence of methylaluminoxane (MAO) as cocatalyst. Catalytic activities and the molecular weight of polynorbornene (PNB) were investigated under various reaction conditions. All complexes were fully characterized by elemental analysis and IR and NMR spectroscopy; the structures of 1?a-c, 2?a, b; and 3?a, b, d were further confirmed by single crystal X-ray diffraction.     

Self-assembly of neutral and cationic PdII organometallic molecular rectangles: synthesis, characterization and nitroaromatic sensing

Design and synthesis of three novel [2 + 2] self-assembled molecular rectangles 1-3via coordination driven self-assembly of predesigned Pd(ii) ligands is reported. 1,8-Diethynylanthracene was assembled with trans-Pd(PEt(3))(2)Cl(2) in the presence of CuCl catalyst to yield a neutral rectangle 1via Pd-C bond formation. Complex 1 represents the first example of a neutral molecular rectangle obtained via C-Pd coordination driven self-assembly. A new Pd(2)(II) organometallic building block with 180° bite-angle 1,4-bis[trans-(ethynyl)Pd(PEt(3))(2)(NO(3))]benzene (M(2)) containing ethynyl functionality was synthesized in reasonable yield by employing Sonagashira coupling reaction. Self-assembly of M(2) with two organic clip-type donors (L(2)-L(3)) afforded [2 + 2] self-assembled molecular rectangles 2 and 3, respectively [L(2) = 1,8-bis(4-pyridylethynyl)anthracene; L(3) = 1,3-bis(3-pyridyl)isophthalamide]. The macrocycles 1-3 were fully characterized by multinuclear NMR and ESI-MS spectroscopic techniques, and in case of 1 the structure was unambiguously determined by single crystal X-ray diffraction analysis. Incorporation of Pd-ethynyl bonds helped to make the assemblies π-electron rich and fluorescent in nature. Complexes 1-2 showed quenching of fluorescence intensity in solution in presence of nitroaromatics, which are the chemical signatures of many commercially available explosives.     

Synthesis,characterization, and olefin polymerization of half-sandwich Ir,Rh, Ru metallacycle enclosing a nickel in the center

Reactions of binuclear [Cp*Ir(μ-Cl)Cl]₂ (Cp* = pentamethylcyclopentadienyl), [Cp*Rh(μ-Cl)Cl]₂ and [(p-cymene)Ru(μ-Cl)Cl]₂ with 2 equiv. AgOTf (OTf = O₃SCF₃) followed by addition of one equiv. (m-pyridyl)N=C(C₁₀H₆)C=N(m-pyridyl) (mPy-bian) linker and NiCl₂·DME (DME = 1,2-dimethoxyethane) in methanol gave heterometallic cationic metallacycles [Cp*₄Ir₄(μ-Cl)₄(μ-mPy-bian)₂NiCl₂](OTf)₄ (1a), [Cp*₄Rh₄(μ-Cl)₄(μ-mPy-bian)₂NiCl₂](OTf)₄ (1b), and [(p-cymene)₄Ru₄(μ-Cl)₄(μ-mPybian)₂NiCl₂](OTf)₄ (1c), respectively. All the complexes are characterized by IR, NMR spectroscopy, and elemental analysis. Ni K-edge X-ray absorption spectroscopy (XAS) studies on 1a–1c reveal that nickel is six-coordinate with four nitrogens and two chlorides. Upon activation with MAO, 1a–1c showed moderate to good catalytic activity for ethylene and norbornene polymerization.     

Alkynylated phenazines: synthesis, characterization, and metal-binding properties of their bis-triazolyl cycloadducts

We have synthesized a series of ethynylated phenazines and their bis-triazolyl cycloadducts to serve as metal ion sensors. Binding of metal ions is achieved through coordination to the phenazine nitrogen atom and the triazole ring. To allow metal sensing in aqueous solution, the triazole units are substituted with water-soluble ethylene glycol chains. These phenazine cycloadducts exhibit a selective affinity for binding silver ions. Examination of the halogenated analogues reveals a lowering of the band gap and the corresponding bathochromic shifts in the absorption and emission spectra. The electron-withdrawing properties of these halogens also result in significantly decreased metal-binding activity of the phenazine cycloadducts.     

Donor-acceptor triazenes: synthesis, characterization, and study of their electronic and thermal properties

A new class of 1,3-disubstituted-triazenes were synthesized by coupling functionalized benzimidazol-2-ylidenes, as their free N-heterocyclic carbenes or generated in situ from their respective benzimidazolium precursors, to various aryl azides in modest to excellent isolated yields (36-99%). Electron delocalization between the two coupled components was studied using UV-vis spectroscopy, NMR spectroscopy, and X-ray crystallography. Depending on the complementarity of the functional groups on the N-heterocyclic carbenes and the organic azides, the respective triazenes were found to exhibit lambda(max) values ranging between 364 and 450 nm. X-ray crystallography revealed bond alteration patterns in a series of triazenes characteristic of donor-acceptor compounds. Triazene thermal stabilities were studied using thermogravimetric analysis and found to be strongly dependent on the sterics of the benzimidazol-2-ylidene component and the electronics of the azide component. Triazenes possessing bulky N-substituents (e.g., neo-pentyl, tert-butyl, etc.) were stable in the solid-state to temperatures exceeding 150 degrees C, whereas analogues with small N-substituents (e.g., methyl) were found to slowly decompose at room temperature. Triazenes featuring electron-rich phenyl azide components decomposed at higher temperatures than their electron-deficient analogues. Products of the thermally induced triazene decomposition reaction were identified as molecular nitrogen and the respective guanidine. Using an isotopically labeled triazene, the mechanism of the decomposition reaction was found to be analogous to the Staudinger reaction.     

Zwitterionic half-sandwich Rh and Ir complexes containing a diphosphine nido-carborane ligand: synthesis, structure transformation and application in H2 activation

Several novel zwitterionic half-sandwich complexes and pseudocloso metallacarboranes based on 1,2-(PPh(2))(2)-1,2-C(2)B(10)H(10) were successfully prepared, and further study proved that some of them can activate H(2) to form the metal hydride complexes Cp*M(H)(7,8-(PPh(2))(2)-7,8-C(2)B(9)H(10)) (M = Rh, Ir).     

Synthesis, characterization, and catalytic properties of new half-sandwich zirconium(IV) complexes

A number of new half-sandwich zirconium(IV) complexes bearing N,N-dimethylaniline-amido ligands with the general formula Cp*ZrCl(2)[ortho-(RNCH(2))(Me(2)N)C(6)H(4)] [R = 2,6-Me(2)C(6)H(3) (1), 2,6-(i)Pr(2)C(6)H(3) (2), (i)Pr (3), (t)Bu (4)] were synthesized by the reaction of Cp*ZrCl(3) with the corresponding ortho-(Me(2)N)C(6)H(4)CH(2)NRLi. All new zirconium complexes were characterized by (1)H and (13)C NMR, elemental analyses and single crystal X-ray diffraction analysis. The molecular structural analysis reveals that the NMe(2) group does not coordinate to the zirconium atom in all cases. Complexes 1-4 all have a pseudo-tetrahedral coordination environment in their solid state structures and adopt a three-legged piano stool geometry for the zirconium atoms with the amide N atom and the two Cl atoms being the three legs and the Cp* ring being the seat. Variable-temperature (1)H NMR experiments for all complexes 1-4 were performed to investigate the possible intramolecular interaction between the N atom in the NMe(2) group and the central zirconium atom in solution. Upon activation with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), complexes 1-4 all exhibit moderate to good catalytic activity for ethylene polymerization and copolymerization with 1-hexene, producing linear polyethylene or poly(ethylene-co-1-hexene) with moderate molecular weight and reasonable 1-hexene incorporation.     

Hyperbranched polyesters: synthesis, characterization, and molecular simulations

New types of hyperbranched polyesters were synthesized by the reaction of 2,2-bis(hydroxymethyl) propionic acid as an AB2-type monomer with pentaerythritol, trimethylol propane, or glycerol as the core moiety. The obtained globular networks were characterized by NMR and MALDI-TOF spectroscopic techniques. Molecular weights determined by MALDI-TOF were confirmed by gel permeation chromatography. Fourier transform infrared (FTIR) spectroscopy was used for the quantitative evaluation of hydrogen bonding as well as to study the structure-property relationship. To investigate the changes and types of intermolecular H-bonding interactions in hyperbranched polyesters with a variation in molecular structure, the deconvolution of FTIR spectra was carried out using Origin 6.0 software through the Gaussian curve-fitting method. Molecular simulations were performed through molecular mechanics and molecular dynamics (MD) calculations using the DISCOVER module. Cohesive energy density, solubility parameters, and surface properties of the hyperbranched polyesters were calculated. Further, vibrational analysis was computed using MD simulations for all the hyperbranched polyesters developed in this work.     

Self-assembly of metallamacrocycles using a dinuclear organometallic acceptor: synthesis, characterization, and sensing study

A dinuclear organometallic acceptor 4,4'-bis[trans-Pt(PEt(3))(2)(O(3)SCF(3))(ethynyl)]biphenyl (1) containing Pt-ethynyl functionality is synthesized. Multinuclear NMR ((1)H, (31)P, and (13)C), infrared (IR), and electrospray ionization mass spectrometry (ESI-MS) including single-crystal X-ray diffraction analysis established the formation of 1. Equimolar treatment of acceptor 1 separately with three different "clip" type ditopic donors (L(a)-L(c)) yielded [2 + 2] self-assembled three metallamacrocycles 2a-2c, respectively. These macrocycles were characterized by various spectroscopic techniques, and their sizes/shapes were obtained through geometry optimization using molecular mechanics universal force field (MMUFF) simulations. Attachment of unsaturated ethynyl functionality to biphenyl building unit helped to make the macrocycles (2a-2c) π-electron rich and thereby fluorescent in nature. Furthermore, 2c in solution has been examined to be suitable for sensing electron-deficient nitroaromatic like picric acid, which is often considered as a secondary chemical explosive. The fluorescence study of 2c showed a marked quenching of initial emission intensity upon titrating with picric acid (PA), and it exhibited the largest fluorescence quenching response with high selectivity among various other electron deficient aromatic compounds tested.     

Synthesis and characterization of binuclear half-sandwich metal (Co, Ir and Ru) complexes containing ancillary ortho-carborane-1,2-dithiolato ligands

The assembly of soluble, air-stable, binuclear structures, namely {(p-cymene)Ru[S(2)C(2)(B(10)H(10))]}(2)(micro-pyz), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-pyz), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-bpy), {Cp*Co[S(2)C(2)(B(10)H(10))]}(2)(micro-bpe) and {Cp*Ir[E(2)C(2)(B(10)H(10))]}(2)(micro-bpo) (E = S (), Se), in which organometallic units are bridged by pyridyl-based organic linkers, are synthesized. The complexes have been fully characterized by IR and NMR spectroscopy, as well as elemental analysis. The molecular structures are established through X-ray crystallography.     

Self-assembly of molecular nanoball: design, synthesis, and characterization

The design and self-assembly of two new flexible supramolecular nanoballs are described. These assemblies incorporate two flexible tritopic amide and ester building blocks and were prepared in excellent yields (96-97%) via coordination driven self-assembly. The first resulted from the reaction of 4 equiv of a new tritopic ester ligand N,N',N' '-tris(4-pyridylmethyl) trimesic ester and 3 equiv of C4 symmetric Pd(NO3)2. The second analogous structure was obtained by the self-assembly of a flexible N,N',N' '-tris(3-pyridylmethyl) trimesic amide and Pd(NO3)2. The assemblies were characterized with multinuclear NMR spectroscopy, electrospray ionization mass spectroscopy, elemental analysis, and TGA. Mass spectrometry along with NMR data and TEM view confirms the existence of the two assemblies. MM2 force field simulations of the cages showed a ball shape with the diameter of the inner cavity of about 2.1 and 1.8 nm for 2a and 2b, respectively, which were also corroborated by TEM analysis.     

Novel fluoroacrylated copolymers: synthesis, characterization and properties

The development of polymer waveguides leads to synthesis of fluorinated amorphous polymers with high transmission capacity, potential to tune their optical properties by tailoring the molecular structure, together with good processability, easy handling, good flexibility and low cost.In this work we have investigated new thermoplastic fluoroacrylated copolymers, synthesized by radical copolymerization of fluoroalkene(s) with five-membered cyclic carbonate and a third monomer or transfer agent, both containing OH group susceptible to be used for grafting of photocrosslinkable groups. The reaction of hydroxy functionalized copolymers with different acrylating agents results in fluoroacrylated resins with molecular weight in the range of 2000-3000 g mol⁻¹, yield >75% and good solubility in reactive diluents. In the presence of photoinitiator(s), they were crosslinked under UV-radiation in order to obtain optical waveguides.The copolymers synthesized were characterized by ¹H, ¹⁹F and ¹³C NMR as well as FT-IR spectroscopies and have good thermal stability (T_d > 200 °C). The refractive indeces of hydroxy functionalized fluorooligomers and acrylated resins were found to range from 1.44 to 1.45 at 23 °C and the T_gs (by DSC) varied from 40 to 110 °C depending on the content of the cyclic monomer. The optical characteristics of these thermoplastic fluoroacrylated copolymers are under progress.     

New homoleptic organometallic derivatives of vanadium(III) and vanadium(IV): synthesis, characterization, and study of their electrochemical behaviour

The arylation of [VCl3(thf)3] with LiR(Cl), where R(Cl) is a polychlorinated phenyl group [C6Cl5, 2,4,6-trichlorophenyl(tcp), or 2,6-dichlorophenyl (dcp)] gives four-coordinate, homoleptic organovanadium(III) derivatives with the formula [Li(thf)(4)][V(III)(R(Cl))(4)] (R(Cl) = C(6)Cl(5) (1), tcp (2), dcp (3)). The anion [V(III)(C6Cl5)4]- has an almost tetrahedral geometry, as observed in the solid-state structure of [NBu4][V(C6Cl5)4] (1') (X-ray diffraction). Compounds 1-3 are electrochemically related to the neutral organovanadium(IV) species [V(IV)(R(Cl))4] (R(Cl) = C6Cl5 (4), tcp (5), dcp (6)). The redox potentials of the V(IV)/V(III) semisystems in CH2Cl2 decrease with decreasing chlorination of the phenyl ring (E(1/2) = 0.84 (4/1), 0.42 (5/2), 0.25 V (6/3)). All the [V(IV)(R(Cl))4] derivatives involved in these redox couples could also be prepared and isolated by chemical methods. The arylation of [VCl(3)(thf)(3)] with LiC6F5 also gives a homoleptic organovanadium(III) compound, but with a different stoichiometry: [NBu4]2[V(III)(C6F5)5] (7). In this five-coordinate species, the C6F5 groups define a trigonal bipyramidal environment for the vanadium atom (X-ray diffraction). EPR spectra for the new organovanadium compounds 1-6 are also given and analysed in terms of an elongated tetrahedral structure with C(2v) local symmetry. It is suggested that the R(Cl) groups exert a protective effect towards the vanadium centre.     

Benzofuroxans: their synthesis,properties, and biological activity

The review provides a brief historical background for the establishment of structure of benzofuroxanes. Methods for their synthesis are summarized, and the chemical properties are described, which are splitted into two parts: reactions proceeding with a ring opening of the heterocycle, and those occuring with a participation of the isocyclic moiety. The biological activity of various representatives belonging to the benzofuroxan series is covered in details.

     

Oxybenziporphyrins, oxypyriporphyrins, benzocarbaporphyrins, and their 23-oxa and 23-thia analogues: synthesis, spectroscopic characterization, metalation, and structural characterization of a palladium(II) organometallic derivative

A series of nine porphyrin analogues have been synthesized using the "3 + 1" variant on the MacDonald condensation. Tripyrrane-type systems with a centrally unsubstituted pyrrole, furan, or thiophene ring were prepared using conventional methods, and these were condensed with indene-1,3-dicarbaldehyde, 5-formylsalicylaldehyde, or 3-hydroxy-2,6-pyridinedicarbaldehyde in the presence of TFA to generate benzocarba-, oxybenzi-, and oxypyriporphyrins, respectively. The furan-containing analogues proved to be highly basic and could only be isolated as the corresponding hydrochloride salts. All nine analogue systems showed porphyrin-like UV-vis spectra with one or two Soret absorptions near 400 nm and a series of weaker bands at longer wavelengths. These systems also showed large diatropic ring currents by proton NMR spectroscopy that were comparable to true porphyrins. In the presence of trace amounts of TFA, benzocarbaporphyrin 12 formed a monocation, and in 50% TFA a C-protonated dication was generated. The 23-oxacarbaporphyrin 14 gave a monocation in chloroform, although the free base was generated in 5% Et(3)N-chloroform. In 50% TFA-CHCl(3), 14 afforded a mixture of mono- and diprotonated species. Thiacarbaporphyrin 15 also formed a monocation in the presence of TFA, but C-protonation was relatively disfavored for this system. Nonetheless, in the presence of TFA-d, 12, 14, and 15 all showed rapid exchange of the internal NH and CH protons. Carbaporphyrin 12 also showed slow exchange at the meso-positions, but this process was not observed for its heteroanalogues 14 and 15. Protonation studies were also conducted for oxybenziporphyrins and oxypyriporphyrins 16-21. Oxacarbaporphyrin 14 was shown to be a superior organometallic ligand and afforded good yields of the related nickel(II) and palladium(II) derivatives under mild conditions. A low yield of the platinum(II) complex could also be isolated. All three complexes retained their aromatic character, although the Pd(II) derivative appeared to possess a slightly larger diatropic ring current. The palladium(II) complex 27 was further characterized by X-ray crystallography. The macrocyclic core was shown to be highly planar where the dihedral angles of the component pyrrole, furan and indene rings relative to the mean [18]annulene plane were all 相似文献   

Allyl strontium compounds: synthesis, molecular structure and properties

The synthesis and attempted isolation of neutral bis(allyl)strontium [Sr(C(3)H(5))(2)] (1) resulted in the isolation of potassium tris(allyl)strontiate K[Sr(C(3)H(5))(3)] (2). In situ generated 1 shows a pronounced Br?nsted basicity, inducing polymerisation of THF. Ate complex 2 crystallises as [K(THF)(2){Sr(C(3)H(5))(3)}(THF)](∞) (2·(THF)(3)). The salt-like solid state structure of 2·(THF)(3) comprises a two-dimensional network of (μ(2)-η(3):η(3)-C(3)H(5))(-) bridged potassium and strontium centres. Synthesis of allyl complexes 1 and 2 utilised SrI(2), [Sr(TMDS)(2)] (3) (TMDS = tetramethyldisilazanide), and [Sr(HMDS)(2)] (HMDS = hexamethyldisilazanide) as strontium precursors. The solid state structure of previously reported [Sr(TMDS)(2)] (3) was established by X-ray single crystal analysis as a dissymmetric dimer of [Sr(2)(TMDS)(4)(THF)(3)] (3·(THF)(3)) with multiple Si-HSr agostic interactions. The presence of ether ligands (THF, 18-crown-6) influenced the Si-HSr resonances in the NMR spectra of the amido complex 3.