Bifunctional hybrid mesoporous organoaluminosilicates with molecularly ordered ethylene groups

We report the synthesis and characterization of crystal-like structurally well-ordered ethylene-containing hybrid mesoporous organoaluminosilicate materials, which exhibit molecular-level periodicity in the pore walls and enhanced hydrothermal stability. Distilled 1,2-bis(triethoxysilyl)ethylene (BTEE) was used as the organosilica precursor, aluminum isopropoxide as aluminum source, and cetyltrimethylammonium bromide as template. The materials are structurally well-ordered and exhibit high surface area (>1300 m(2)/g) and pore volume (>1.10 cm(3)/g). The presence of molecularly ordered ethylene groups was confirmed by powder X-ray diffraction, (29)Si and (13)C MAS NMR, and Raman spectroscopy. The ethylene groups are thermally stable up to a temperature of 300 degrees C. The presence of ethylene groups enhances the hydrothermal stability in boiling water of both organosilica and organoaluminosilicate materials. The organoaluminosilicate materials possess a bifunctional character arising from the presence of both tetrahedrally coordinated Al and molecularly ordered ethylene groups in their frameworks.     

Adsorption of toluene and toluene–water vapor mixture on almond shell based activated carbons

The aim of work is to study the adsorption of a common volatile organic compound such as toluene using activated carbons prepared by chemical activation with phosphoric acid of a lignocellulosic precursor, almond shell, under different conditions. The Impregnation ratio, temperature and time of activation were modified to obtain activated carbons with different characteristics. Regarding the characteristics of the activated carbons, the effects of porous structure and surface chemistry on the toluene adsorption capacity from toluene isotherms have been analysed. Results show that the control of properties of the activated carbons, particularly porous structure, highly dependent on the preparation conditions, plays a decisive role on the toluene adsorption capacity of the activated carbons. Concerning the experiments of toluene adsorption conducted in dynamic mode, activated carbons prepared at low temperatures of activation show higher breakthrough times than those obtained for activated carbons prepared at higher activation temperatures. The amount of toluene adsorbed in presence of water vapor in the gas stream lead to a decrease ranging from 33 to 46 % except for carbons prepared at higher temperatures activated that show only a slight decrease in the amount of toluene adsorbed. Activated carbons can be regenerated with soft heat treatment showing a slight decrease in the adsorption capacity. The high toluene adsorption capacities as well as the high breakthrough times obtained in presence of water vapor make these activated carbons suitable for commercial applications.     

Preparation and characterization of periodic mesoporous organosilica terminally functionalized with fluorocarbon groups by a direct synthesis

Fluorocarbon groups were used to modify the pore channels of ethane-bridged periodic mesoporous organosilica by the co-condensation of 1,2-Bis(triethoxysilyl)ethane (BTESE) and trifluoropropyltrimethoxysilane (TFPTMS) in the presence of Poly(ethylene glycol)-B-Poly(propylene glycol)-B-Poly(ethylene glycol) (P123) surfactants under acidic conditions. The functionalized materials were investigated in detail by means of XRD, TEM, FT-IR, solid-state NMR, and N₂ adsorption. The effect of fluorocarbon groups concentration on the mesoscopic order and pore structure of the functionalized materials was also studied. The results show that bridging groups in the framework do not cleave and fluorocarbon groups are attached covalently to the pore wall of periodic mesoporous organosilica after functionalization. The samples functionalized with 20% TFPTMS remain desired mesoporous architecture, with a narrow pore size distribution centered at 4.1 nm, a large surface of 834 m²/g and a pore volume of 0.91 cm³g⁻¹, without pronounced change compared to the pure periodic mesoporous organosilica. Unfortunately the functionalized materials become structurally disordered with increasing amount of fluorocarbon groups.     

苯官能化MCM-41的合成、表征、磺酰化及与二胺的反应

以三乙氧基硅基苯((C₂H₅O)₃Si-Ph，（(triethoxysilyl)benzene，TESB)以及正硅酸乙酯（TEOS）的混合液为硅源，以溴代十六烷基吡啶(CPBr)为模板剂，在HCl介质中合成了苯官能化的有机-无机杂化介孔分子筛MCM-41。对合成的分子筛用FT-IR、PXRD、TEM、N₂吸附-脱附等手段进行了表征。结果表明，合成的苯官能化的有机-无机杂化介孔分子筛具有良好的介孔孔道结构。用三甲基氯硅烷对分子筛表面的Si-OH进行了封端处理，用氯磺酸对合成的苯官能化的有机-无机杂化介孔分子筛进行了磺酰化，并与各种二胺进行了反应。     

The effect of triethyl citrate on the dispersibility and water vapor sorption behavior of polylactic acid/zeolite composites

The aim of this study was to investigate the water vapor adsorption behavior and mechanical properties of poly (lactic acid) (PLA)/zeolite (5, 10, or 15 phr) composites prepared with triethyl citrate (TEC; 20 phr) via a melting process. TEC was used to improve the flexibility of the PLA and the dispersibility of the zeolite in TEC-zeolite suspensions that were ultra-sonicated. It was found that zeolite was uniformly dispersed in the PLA matrix, and the interfacial adhesion between the PLA matrix and zeolite was enhanced by TEC. In addition, the tensile strengths and Young's modulus of the composites improved with increasing zeolite content. The PLA/zeolite composites prepared with TEC had increased water vapor permeability and contact angles compared to neat PLA and standard PLA/zeolite due to the presence of TEC. In particular, TEC accelerated the hydrolysis of the PLA surface in a high humidity environment, resulting in an improvement in water vapor sorption capacity. At the same zeolite content of 15 phr, the equilibrium moisture content (EMC) values of PLA/zeolite films prepared with TEC increased by up to 39.25 mg/g whereas those prepared without TEC only increased by up to 24.33 mg/g. The results suggest the possibility of applying PLA/zeolite films prepared with TEC as a flexible active packaging material.     

Adsorption-Desorption Characteristics of Water Vapor on Functional Cattle Bone-Originated Apatites Powders with Mesopores

Microcrystals of cattle bone-originated apatites (r-HAp) were prepared by the dissolution-precipitation and freeze-drying processes. The r-HAp particles obtained gave 128 m 2 ;g m 1 specific surface area and 0.376 cm 3 ;g m 1 total pore volume and strong basic surface with mesopores. All the adsorption isotherms of water vapor at 288-308 K for the r-HAp powders obeyed IV-type in a classification of the BDDT. In the repeated adsorption-desorption operations, an adsorption hysteresis resulting from mesopores was recognized. The amounts of water vapor adsorbed obtained in the first adsorption operation were larger than those in the second adsorption operation, indicating that some portion of water vapor adsorbed to be irreversible adsorption. The water vapor-adsorption heats for the r-HAp were 45-60 kJ;mol m 1 , whose values were higher than natural diatomite. The amounts of water vapor adsorbed for the r-HAp were larger than those for the adsorbents, such as natural diatomite, aerosol silica, and activated carbon, at the relative partial pressures of 0-0.7.     

Adsorption of hydrocarbons on mesoporous SBA-15 and PHTS materials

Plugged hexagonal templated silica (PHTS) materials are synthesized using a high TEOS/EO(20)PO(70)EO(20) ratio in the SBA-15 synthesis. This generates internal microporous nanocapsules or plugs in part of the channels, which could be inferred from the two-step desorption branch. These materials exhibit a tunable amount of open and plugged pores and a very high micropore volume (up to 0.24 mL/g) and are more stable than the conventional micellar templated structures known so far. In this study the adsorption properties of PHTS are investigated and compared to those of its plug-free analogue SBA-15. For this purpose nitrogen, n-hexane, n-heptane, c-hexane, 3-methylpentane, 1-hexene, and water were adsorbed on SBA-15 and PHTSs with a different ratio of open and plugged mesopores. The adsorption of n-hexane, c-hexane, n-heptane, and 3-methylpentane on SBA-15 and PHTS-A demonstrated that the presence of the plugs had an effect on the uptake of adsorbate in the low relative pressure region, the position of the capillary condensation step, and the total adsorbed amount of adsorbate. The results showed that n-heptane and 3-methylpentane cannot access part of the micropore system of SBA-15 and PHTS-A. Adsorption of c-hexane and n-hexane on PHTS-A indicated that not only the kinetic diameter but also the shape of the molecule is an important factor for being able to be adsorbed into the micropores or past the plugs. Moreover, these two adsorbates were the most efficient in filling up the available pore volume. From the adsorption of n-hexane on PHTSs with a different ratio of open and plugged pores, it was concluded that the size of the plugs differed, which depends on the synthesis conditions. Water adsorption isotherms proved SBA-15 and PHTS-B to be more hydrophobic than PHTS-A. n-Hexane, 1-hexene, and toluene were adsorbed on SBA-15 and the PHTSs to investigate the influence of the polarity of the adsorbate. The isotherms showed higher uptakes for polar adsorbates on more hydrophobic materials and vice versa.     

离子型共价有机框架材料的制备及对染料吸附性能的研究

茜素红(Alizarin Red,AR)作为蒽醌类染料中的重要组成,由于其具有优异的特性,在染料和酸碱指示剂等方面被广泛使用。但是AR具有毒性高、结构复杂以及化学需氧量(COD)值大等原因,使其成为了主要污染物之一,去除水体中的茜素红染料污染物已经成为了目前亟待解决的问题。共价有机框架材料作为一种新型的多孔有机材料,由于其具有比表面积大,孔径均一和可设计的独特优势,已经广泛应用吸附和分离等方面。因此,以三醛基间苯三酚和溴化乙锭为构筑单元,通过水热的方法合成一种二维离子型共价有机框架材料(TpEB-COF)。对制备的TpEB-COF进行相关表征,包括X射线衍射仪(XRD),扫描电镜(SEM)和能量色散谱仪(EDS)等。然后将制备的TpEB-COF作为固体吸附剂,将其应用对水中AR的吸附,研究了不同吸附时间和不同pH值对吸附过程的影响。实验结果证明制备的离子型共价有机框架材料具有良好的晶型结构。同时,对实验数据分析表明,离子型共价有机框架材料对于茜素红的吸附符合准二级动力学方程和Langmuir吸附模型,吸附效率为82.8%,最大吸附量为828 mg g-1。本研究不仅为共价有机框架材料的设计和合成奠定坚实的基础,而且拓展了离子型共价有机框架材料的应用范围,促进共价有机框架材料的发展。     

Advanced mesoporous organosilica material containing microporous beta-cyclodextrins for the removal of humic acid from water

A new mesoporous organosilica material (beta-CD-Silica-4%) containing microporous beta-cyclodextrins (beta-CDs) has been prepared by the co-polymerization of a silylated beta-CD monomer with tetraethoxysilane in the presence of a structure-directing template, cetyltrimethylammonium bromide. Solid-state 13C and 29Si NMR studies provided evidence for the presence of covalently attached beta-CDs in the mesoporous material. Nitrogen adsorption experiments showed that beta-CD-Silica-4% material had a BET surface area of 460 m2/g and an average mesopore diameter of 2.52 nm. Small-angle powder X-ray diffraction pattern of beta-CD-Silica-4% material revealed the lack of highly ordered mesoporous structure. Adsorption experiments showed that beta-CD-Silica-4% material removed up to 99% of humic acid from an aqueous solution containing 50 ppm of humic acid at a solution-to-solid ratio of 100 ml/g.     

γ-Al2O3法制备复合多孔树脂及其调湿与甲醛吸附性能

复合多孔树脂以其调湿速度快、湿含量高等特点比传统多孔硅胶更适合作为智能调湿材料。本文利用氢氧化铝高温分解产生活性氧化铝并释放水蒸气的致孔途径制备出复合多孔树脂。通过TG、SEM、 FTIR、XRD和氮气吸附等手段表征了该树脂的形貌和结构特征,测试了复合多孔树脂分别在高湿和低湿环境的调湿性能和饱和湿含量,讨论了多孔树脂在不同温度条件的调湿性能和在25℃时对微量甲醛的吸附性能。结果表明：本文的致孔方法能有效地使树脂内部形成多孔结构。复合多孔树脂具有良好的调湿和甲醛吸附性能。在制备过程中通过控制树脂内部的孔参数,材料能将空间相对湿度在4h内调控并维持在50%-60%的范围之内,且不受温度变化的影响,甲醛吸附量为5.55ppm/g。材料可以作为智能调湿材料用于文物保护,为文物存放环境创造一个恒湿干净的空间。     

Interaction of microcrystalline cellulose and water in granules prepared by a high-shear mixer

Microcrystalline cellulose (MCC) granules were prepared by wet granulation using a high-shear mixer. Physical characteristics of the granules were investigated using near IR spectrometry, thermogravimetry and isothermal water vapor adsorption. Near IR spectra of dried MCC granules prepared for various granulation times exhibited different peak intensities at 1428, 1772, and 1920 nm, which were assigned to functional groups of cellulose or water. On isothermogravimetric analysis, the rate of dehydration of water was shown to decrease with granulation time. These results suggest that the physical structure of MCC could change during the granulation process, and the interaction between MCC and water was gradually strengthened. The isothermal water vapor adsorption curves suggested that the amorphous region of MCC would be divided by the strong shear force of the impeller, because the high adsorption ability of intact MCC in the low humidity region was diminished in granules collected following 5 and 10 min of granulation. It was suggested that MCC formed a network which caught water within its structure during the wet granulation process.     

Adsorption, desorption, and thermodynamic studies of CO2 with high-amine-loaded multiwalled carbon nanotubes

Commercially available multiwalled carbon nanotubes (CNTs) were functionalized with a high mass load of 3-aminopropyltriethoxysilane (APTS) to study their behaviors in the cyclic CO(2) adsorption as well as the associated thermodynamic properties. The breakthrough curve showed a fast kinetics of CO(2) adsorption resulting in percentage ratios of working capacity to equilibrium capacity greater than 80%. The adsorption capacity of CNT(APTS) was significantly influenced by the presence of water vapor and reached a maximum of 2.45 mmol/g at a water vapor of 2.2%. The adsorption capacities and the physicochemical properties of CNT(APTS) were preserved through 100 adsorption-desorption cycles displaying the stability of CNT(APTS) during a prolonged cyclic operation. The heat input required to regenerate spent CNT(APTS) was determined, and the result suggests that adsorption process with solid CNT(APTS) is possibly a promising CO(2) capture technology.     

苯基化硅胶的物理结构和表面性质的研究

本文利用苯基三氯硅烷和硅胶表面羟基反应制备了苯基化硅胶。测定了苯基化硅胶的物理结构、水蒸气吸附等温线、润湿热、差热分析(DTA)和红外光谱(IR)。结果表明,所有苯基化硅胶的真密度(dT)、比表面(S)和比孔体积(V)均减少, 而表观密度(dA)增加, 但苯基化对不同硅胶的平均孔半径(r)有不同的影响; 苯基化硅胶对水蒸气吸附, 对水、苯和环己烷的润湿热均显著减少; 苯基化硅胶的热稳定性大于甲基化硅胶, 甲基化硅胶的表面是高度憎水的, 但苯基化硅胶的憎水性则很弱。     

Adsorption properties and porous structure of new carbon materials

The adsorption properties of the new carbon materials, sibunites, which are mesoporous samples with a developed surface of pores, were studied. The isotherms of the adsorption of benzene vapor were determined to estimate the porous structure of these materials. The principal methods for calculating the parameters of the porous structure of sibunites were analyzed. The application of the BET equation even in the presence of a small number of micropores can distort the results, therefore the most suitable method for estimating the surface of mesopores is one that is based on the Dubinin—Zaverina equation. The estimation of the surface of sibunites using water vapor adsorption is demonstrated.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1377–1380, August, 1993.     

The effect of the dehydration conditions of chitosan-based polymeric adsorbents on the adsorption of nickel cations

The structure and adsorption properties (with respect to water vapor and nickel cations) of chitosan samples dehydrated by either lyophilization after precipitation with NaOH or Na₂CO₃ or drying in air are investigated. IR spectroscopy and X-ray diffraction data testify that the lyophilization causes both changes in the conformation of chitosan macromolecules and a substantial rise in the crystallinity of the polymer to compare with the air dried one. Chitosan structure ordering resultant from the lyophilization noticeably increases its sorption ability with respect to both water vapor and nickel cations. For example, the sorption capacity of the lyophilized chitosan with respect to nickel cations is as high as 4.5 mmol/g and, thus, is threefold higher than that of air-dried chitosan. The comparative analysis of water adsorption isotherms in the region of low degrees of filling indicates that chitosan structure ordering resultant from the lyophilization changes the number and the energy of primary adsorption sites.     

Adsorption properties of activated carbon from waste newspaper prepared by chemical and physical activation

Adsorption properties of activated carbons prepared from waste newspaper by chemical and physical activation were investigated using water vapor, ammonia, methane, and methylene blue (MB) as adsorbents. The water vapor adsorption isotherms show type V behavior and the maximum vapor adsorption of the chemically and physically activated products is about 1050 and 450 ml/g, respectively. The higher water vapor adsorption of the chemically activated products is attributed to the higher specific surface area (S(BET)) and greater hydrophilic activity (arising from the surface oxygen-containing functional groups) than in the physically activated products. The adsorption of ammonia and methane was measured by temperature-programmed desorption (TPD). NH(3) adsorption is found to be higher in the chemically activated product than in the physically activated product while methane adsorption is slightly higher in the physically activated products even though these have lower S(BET) values. In the MB adsorption, the chemically activated products show higher adsorption (390 mg/g) than the physically activated product. These results are suggested to be related to the surface characteristics.     

Fluorous metal-organic frameworks with superior adsorption and hydrophobic properties toward oil spill cleanup and hydrocarbon storage

We demonstrate that fluorous metal-organic frameworks (FMOFs) are highly hydrophobic porous materials with a high capacity and affinity to C(6)-C(8) hydrocarbons of oil components. FMOF-1 exhibits reversible adsorption with a high capacity for n-hexane, cyclohexane, benzene, toluene, and p-xylene, with no detectable water adsorption even at near 100% relative humidity, drastically outperforming activated carbon and zeolite porous materials. FMOF-2, obtained from annealing FMOF-1, shows enlarged cages and channels with double toluene adsorption vs FMOF-1 based on crystal structures. The results suggest great promise for FMOFs in applications such as removal of organic pollutants from oil spills or ambient humid air, hydrocarbon storage and transportation, water purification, etc. under practical working conditions.     

In situ FTIR study on the formation and adsorption of CO on alumina-supported noble metal catalysts from H2 and CO2 in the presence of water vapor at high pressures

The formation and adsorption of CO from CO(2) and H(2) at high pressures were studied over alumina-supported noble metal catalysts (Pt, Pd, Rh, Ru) by in situ FTIR measurements. To examine the effects of surface structure of supported metal particles and water vapor on the CO adsorption, FTIR spectra were collected at 323 K with untreated and heat (673 K) treated catalysts in the absence and presence of water (H(2)O, D(2)O). It was observed that the adsorption of CO occurred on all the metal catalysts at high pressures, some CO species still remained adsorbed under ambient conditions after the high pressure FTIR measurements, and the frequencies of the adsorbed CO species were lower either for the heat treated samples or in the presence of water vapor. It is assumed that the CO absorption bands on atomically smoother surfaces appear at lower frequencies and that water molecules are adsorbed more preferentially on atomically rough surfaces rather than CO species.     

医用多孔壳聚糖膜的制备及性能研究

以邻苯二甲酸二丁酯为致孔剂,制备了多孔壳聚糖膜,并用扫描电镜对其表面和断面形貌进行了分析,同时对膜的吸水性、水蒸气透过性、比表面积、力学性能及生物相容性等进行了考察。分析结果表明:以邻苯二甲酸二丁酯为致孔剂,制备的多孔壳聚糖膜孔径均匀,吸水性好,孔隙率高,比表面积大,膜的最大吸水率、孔隙率和比表面积分别为196%、71.5%和1.0472 m2.g-1;膜的力学性能好,最大抗拉强度为273.17MN/m2。     

聚对羟基苯乙烯吸附树脂的合成及对咖啡因的吸附机理研究

用正庚烷／正丁醇、正庚烷／环己醇等混合溶剂为致孔剂合成了一系列具有不同比表面积的对羟基苯乙烯－二乙烯苯共聚物,并研究了这些共聚物对咖啡因的吸附性能。结果表明：凝胶型树脂吸附量小,而大孔型树脂吸附量大且比表面积对树脂的吸附量影响不明显。ＩＲ证实这类树脂吸附咖啡因时,氢键起了非常重要的作用。