Spectroscopic study of protonation of oligonucleotides containing adenine and cytosine

Acidobasic properties of purine and pyrimidine bases (adenine, cytosine) and relevant nucleosides (adenosine, cytidine) were studied by means of glass-electrode potentiometry and the respective dissociation constants were determined under given experimental conditions (I = 0.1 M (NaCl), t = (25.0 ± 0.1) °C): adenine (pK _HL = 9.65 ± 0.04, pK _H2L = 4.18 ± 0.04), adenosine (pK _H2L = 3.59 ± 0.05), cytosine (pK _H2L = 4.56 ± 0.01), cytidine (pK _H2L = 4.16 ± 0.02). In addition, thermodynamic parameters for bases: adenine (ΔH ⁰ = (−17 ± 4) kJ mol⁻¹, ΔS ⁰ = (23 ± 13) J K⁻¹ mol⁻¹), cytosine (ΔH ⁰ = (−22 ± 1) kJ mol⁻¹, ΔS ⁰ = (13 ± 5) J K⁻¹ mol⁻¹) were calculated. Acidobasic behavior of oligonucleotides (5′CAC-CAC-CAC3′ = (CAC)₃, 5′AAA-CCC-CCC3′ = A₃C₆, 5′CCC-AAA-CCC3′ = C₃A₃C₃) was studied under the same experimental conditions by molecular absorption spectroscopy. pH-dependent spectral datasets were analyzed by means of advanced chemometric techniques (EFA, MCR-ALS) and the presence of hemiprotonated species concerning (C⁺-C) a non-canonical pair (i-motif) in titled oligonucleotides was proposed in order to explain experimental data obtained according to literature.     

Determination of anti-oxidant capacity and content of phenols,phenolic acids,and flavonols in Indian and European gooseberry

Phenolic acids and derivatives of quercetin in Indian (amla) and European gooseberry were determined by high-performance liquid chromatography with diode array detector. The calibration curves were constructed using phenolic compounds standards (the coefficient of determination (R ²) was 0.9990–0.9997 for phenolic acids and 0.9989–0.9994 for flavonols, respectively). The lowest detection limit was 0.28 mg L⁻¹ and 0.35 mg L⁻¹ for hyperoside and gallic acid, respectively, whereas the highest was 1.80 mg L⁻¹ and 7.98 mg L⁻¹ for quercetin and chlorogenic acid, respectively. The quantification limits calculated were 0.85–24.04 mg L⁻¹ for hyperoside and chlorogenic acid, respectively. The predominant phenolic acid in amla and gooseberry is gallic acid: (5.37 ± 0.04) mg per 100 g of dry mass (d.m.) and (3.21 ± 0.03) mg per 100 g of d.m., respectively. The next one was caffeic acid, 0.65–1.22 mg per 100 g of d.m., followed by p-coumaric acid, 0.84–1.17 mg per 100 g of d.m. Out of the flavonols, rutin is predominant: (3.11 ± 0.13) mg per 100 g of d.m. and (2.12 ± 0.03) mg per 100 g of d.m., respectively. Anti-oxidant activity was also determined.     

The use of stable isotopes ratios for authentication of fruit juices

The determination of the content of stable isotopes, ¹⁸O and ²H, respectively, in juice water facilitates the distinction between authentic juices and juices made from concentrates by redilution with tap water. At the same time, the detection of C₄ cane or corn-derived sugar syrups in fruit juices which are produced from C₃ fruit types is thus facilitated by the characteristic differences in ¹³C/¹²C, expressed as δ ¹³C (‰) values due to photosynthetic CO₂ assimilation via the C₃₋, C₄₋, and crassulacean acid metabolism pathways. In this study, the quantitative determination of water added to an authentic juice, on the basis of δ ¹⁸O, and δ ²H values, respectively, was successfully performed. Also, the δ ¹⁸O, and δ ²H of juice water and δ ¹³C of the whole juice in 18 samples were also determined. The results obtained provided us with the possibility of distinguishing between authentic fruit juices and those obtained by redilution of concentrated fruit juices and the detection of C⁴ type added sugar.     

Custom-Made C18 Column for Simultaneous Determination of Endocrine Disrupting Substances in Water by Diode-Array and Fluorescence Detectors

A C₁₈ stationary phase was synthesized for a custom-made HPLC column. When compared to a commercial C₁₈ column, better chromatographic performances were obtained. This column was successfully applied for simultaneous determination of p,p′-DDT, o,p′-DDT, benzo(a)anthracene, benzo(b)fluoranthene, and benzo(a)pyrene in waters by high performance liquid chromatography coupled with dual detectors (diode array and fluorescence detectors) combined with solid phase extraction. Low method detection limits were obtained, i.e., p,p′-DDT: 0.5 µg L^?1, o,p′-DDT: 1 µg L^?1, benzo(a)anthracene: 2.5 ng L^?1, benzo(b)fluoranthene: 5 ng L^?1, and benzo(a)pyrene: 2.5 ng L^?1. High recoveries that ranged from 82 to 94% were obtained for all compounds.     

A Solid Film Electrode of Intermetallic Ag2Hg3.02 for the Direct Determination of Folic Acid in Fresh and Processed Fruit Juices

AgSIE was used for the direct analysis of folic acid (FA), with a detection limit and lower level of quantitation of 6.8×10^?10 mol L^?1 and 2.3×10^?8 mol L^?1. The analysis in fresh and processed fruits was done without any sample pretreatment. In strawberry and acerola juices, FA concentration level values were below the method detection limit. FA was detectable in peach (77.7±0.4 µg L^?1 and 64.4±0.5 µg L^?1), Persian lime (45.4±0.7 µg L^?1), pineapple Hawaii (66.2±0.4 µg L^?1), pear pineapple (35.3±0.6 µg L^?1), cashew (54.4±0.5 µg L^?1), passion fruit (73.2±0.3 µg L^?1), and apple (84.4±0.5 µg L^?1).     

Development of a sequential injection–square wave voltammetry method for determination of paraquat in water samples employing the hanging mercury drop electrode

This work describes the development and optimization of a sequential injection method to automate the determination of paraquat by square-wave voltammetry employing a hanging mercury drop electrode. Automation by sequential injection enhanced the sampling throughput, improving the sensitivity and precision of the measurements as a consequence of the highly reproducible and efficient conditions of mass transport of the analyte toward the electrode surface. For instance, 212 analyses can be made per hour if the sample/standard solution is prepared off-line and the sequential injection system is used just to inject the solution towards the flow cell. In-line sample conditioning reduces the sampling frequency to 44 h⁻¹. Experiments were performed in 0.10 M NaCl, which was the carrier solution, using a frequency of 200 Hz, a pulse height of 25 mV, a potential step of 2 mV, and a flow rate of 100 μL s⁻¹. For a concentration range between 0.010 and 0.25 mg L⁻¹, the current (i _p, μA) read at the potential corresponding to the peak maximum fitted the following linear equation with the paraquat concentration (mg L⁻¹): i _p = (−20.5 ± 0.3)C _paraquat − (0.02 ± 0.03). The limits of detection and quantification were 2.0 and 7.0 μg L⁻¹, respectively. The accuracy of the method was evaluated by recovery studies using spiked water samples that were also analyzed by molecular absorption spectrophotometry after reduction of paraquat with sodium dithionite in an alkaline medium. No evidence of statistically significant differences between the two methods was observed at the 95% confidence level.     

Determination of Monobromobimane-Labeled Phytochelatins by High-Performance Liquid Chromatography

A new method for phytochelatins by high-performance liquid chromatography (HPLC) was developed based on a condensation reaction with monobromobimane to produce fluorescent derivatives. Glutathione, H-(γ-glutamic acid-cysteine)₂-glycine-OH, H-(γ-glutamic acid-cysteine)₃-glycine-OH, H-(γ-glutamic acid-cysteine)₄-glycine-OH, H-(γ-glutamic acid-cysteine)₅-glycine-OH, and H-(γ-glutamic acid-cysteine)₆-glycine-OH were well separated, with retention times between 14.68 and 22.0 min. The HPLC method had good linearity (r < 0.9991) between 0.1 mg L^?1 and 100 mg L^?1. The limits of quantification for the analytes (S/N = 3) were 0.08, 0.3, 0.05, 0.3, 0.5, and 0.8 mg L^?1, respectively. The recoveries were between 83.0% and 101.33% with relative standard deviations less than 2%. The reported method is simple, accurate, and suitable for the determination of phytochelatins.     

Development and validation of a rapid LC-ESI-MS/MS method for quantification of fluoxetine and its application to MS binding assays

In the present study, a rapid and sensitive LC-ESI-MS/MS method for quantification of (S)-fluoxetine as a native marker in mass spectrometry (MS) binding assays addressing the human serotonin transporter (hSERT) was developed and validated. The concept of MS binding assays based on mass spectrometric quantification of a nonlabeled marker recently introduced by us represents a promising alternative to conventional radioligand binding without the drawbacks inherently connected with radioisotope labeling. For high-performance liquid chromatography (HPLC), a 20 × 2-mm RP-18 column with a mobile phase composed of acetonitrile and ammonium bicarbonate buffer (5 mmol L⁻¹, pH 9.5) at a ratio of 80:20 (v/v) and a flow rate of 800 μL min⁻¹ in an isocratic mode were used, resulting in a chromatographic cycle time of 60 s. Employing [²H₅]fluoxetine as internal standard enabled ESI-MS/MS quantification of (S)-fluoxetine between 3 nmol L⁻¹ and 50 pmol L⁻¹ (LLOQ) in matrix obtained from binding experiments without the need of any sample preparation. Validation of the method showed that linearity, intra-, and inter-batch accuracy as well as precision meet the requirements of the FDA guidance for bioanalytical method validation. Considering sensitivity and speed, the established method is clearly superior to those published for biological matrices so far. Furthermore, the method was transferred to other RP-18 columns of different lengths and respective validation experiments demonstrated its versatility and chromatographic robustness. Finally, the newly developed method was successfully applied to MS binding assays for hSERT. The affinity determined for (S)-fluoxetine in saturation experiments was in good agreement with literature data obtained in respective radioligand binding assays.     

Lactonization and Protonation of Gluconic Acid: A Thermodynamic and Kinetic Study by Potentiometry,NMR and ESI-MS

In acidic aqueous solutions, the protonation of gluconate is coupled with the lactonization of gluconic acid. With a decrease of pC _H, two lactones (δ- and γ-) are sequentially formed. The δ-lactone forms more readily than the γ-lactone. In 0.1 mol⋅L⁻¹ gluconate solutions, if pC _H>2.5 then only the δ-lactone is generated. When the pC _H is decreased below 2.0, formation of the γ-lactone is observed although the δ-lactone still predominates. In solutions with I=0.1 mol⋅L⁻¹ NaClO₄ and room temperature, the deprotonation constant of the carboxylic group was determined to be log ₁₀ K _a=3.30±0.02 using the NMR technique, and the δ-lactonization constant obtained by batch potentiometric titrations was log ₁₀ K _L=−(0.54±0.04). Using ESI-MS, the rate constants for the δ-lactonization and the reverse hydrolysis reaction at pC _H≈5.0 were estimated to be k ₁=3.2×10⁻⁵ s⁻¹ and k ₋₁=1.1×10⁻⁴ s⁻¹, respectively.     

Fast screening immunoassay of sulfonamides in commercial fish samples

An indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed in plate to detect three sulfonamide residues (sulfamerazine (SMR), sulfadimetoxine (SDM), and sulfadiazine (SDZ)) in gilthead sea bream (Sparus aurata) samples. Different extraction methodologies—using methanol/water 1:1 (v/v) + ethylene diamine tetraacetic acid (EDTA) 0.5% (m/v), acetonitrile, phosphate-buffered saline (PBS) 10 mmol L⁻¹ pH 7 and acetate buffer 100 mmol L⁻¹ pH 5—and cleanup steps, based on solid-phase extraction (C₁₈, SCX, Si) or liquid extraction with hexane, were assayed. As optimum, a fast and simple method using acetonitrile was selected to extract the sulfonamide residues from the edible muscle of fish. Due to matrix effects, a standard addition calibration curve in fish extract is necessary for quantification purposes. Sulfonamide-free samples were spiked at different concentration levels (between 30 and 90 ng g⁻¹, 5–15 ng mL⁻¹ in plate) and average recoveries (n = 8), ranging from 71% to 95%, 65% to 79%, and 72% to 95%, were obtained for SMR, SDM, and SDZ, respectively. The assay detection limits for these antibiotics were lower than 100 μg kg⁻¹ (maximum residue level established by the European Union). The accuracy was evaluated by spiking blank fish extracts at different concentrations (10–40 ng mL⁻¹, 5–20 ng mL⁻¹ in plate), and the relative errors ranged between ±20%. Finally, in order to confirm the utility of the developed ELISA as a screening methodology, fish samples from different supermarkets were analyzed, and results were compared with those obtained by a validated high-performance liquid chromatography (HPLC) method. The correlation between the results obtained by both ELISA and HPLC methods is satisfactory.      

Low-temperature thermodynamic properties of <Emphasis Type="Italic">L</Emphasis>-cysteine

Heat capacity C _p(T) of the orthorhombic polymorph of L-cysteine was measured in the temperature range 6–300 K by adiabatic calorimetry; thermodynamic functions were calculated based on these measurements. At 298.15 K the values of heat capacity, C _p; entropy, S _m⁰(T)-S _m⁰(0); difference in the enthalpy, H _m⁰(T)-H _m⁰(0), are equal, respectively, to 144.6±0.3 J K⁻¹ mol⁻¹, 169.0±0.4 J K⁻¹ mol⁻¹ and 24960±50 J mol⁻¹. An anomaly of heat capacity near 70 K was registered as a small, 3–5% height, diffuse ‘jump’ accompanied by the substantial increase in the thermal relaxation time. The shape of the anomaly is sensitive to thermal pre-history of the sample.     

Determination of p-nitroaniline by the tartrate-acetone-Mn2+-KBrO3-H2SO4 double organic substrate oscillating system using non-equilibrium stationary state

This paper described the determination of p-nitroaniline in a double organic substrate oscillating system of tartrate-acetone-Mn²⁺-KBrO₃-H₂SO₄. Under the optimum conditions, temperature was chosen as a control parameter to design the bifurcation point and proposed a convenient method for determination of p-nitroaniline. Results showed that the system consisting of 3.5 mL 0.06 mol L⁻¹ tartrate, 4.0 mL 0.7 mol L⁻¹ H₂SO₄, 1.5 mL 1.5×10⁻⁴ mol L⁻¹ MnSO₄, 4.0 mL 0.4 mol L⁻¹ acetone and 7.0 mL 0.05 mol L⁻¹ KBrO₃ was very sensitive to the surrounding at 33.5°C. A good linear relationship between the potential difference and the negative logarithm concentration of p-nitroaniline was obtained to be in the range of 2.50×10⁻⁷∼3.75×10⁻⁵ mol L⁻¹ with a lower detection limit of 2.50×10⁻⁸ mol L⁻¹.      

Determination of vitamin B<Subscript>1</Subscript> in seawater and microalgal fermentation media by high-performance liquid chromatography with fluorescence detection

A highly sensitive high-performance liquid chromatographic method with fluorescence detection has been developed for determination of vitamin B₁. Vitamin B₁ was converted into a fluorescent compound by treatment with hydrogen peroxide–horseradish peroxidase and the derivative was subsequently analyzed by HPLC on a Waters Spherisorb ODS2 column (250 mm×4.6 mm ID, 5 μm) with 40:60 methanol–pH 8.5 acetate buffer solution as mobile phase and fluorescence detection at 440 nm (with excitation at 375 nm). The calibration graph was linear from 5.00×10⁻¹⁰ mol L⁻¹ to 5.00×10⁻⁷ mol L⁻¹ for vitamin B₁ with a correlation coefficient of 0.9991 (n=9). The detection limit was 1.0×10⁻¹⁰ mol L⁻¹. The method was successfully used for determination of vitamin B₁ at pg mL⁻¹ levels in microalgal fermentation media and seawater after solid-phase extraction. Recovery was from 89 to 110% and the relative standard deviation was in the range 1.1 to 4.3%.     

Solubility of europium oxides in NaI melts at 700°C

The solubility product of EuO (pP _EuO = 8.65 ± 0.5) and its dissociation constant (pK _EuO = 5.67 ± 0.5) in NaI melts at 700°C have been determined by potentiometric titration with the use of a Pt(O₂)|ZrO₂(Y₂O₃) membrane oxygen electrode. Estimated on the basis of these parameters, the total solubility of EuO in NaI melts (1.12 × 10⁻³ mol/kg, logs _EuO = −2.95) is close to the value obtained by the consecutive additions method (2.8 × 10⁻³ mol/kg, logs _EuO = −2.55). The values obtained show that Eu²⁺ (EuI₂) is a stable cationic activator in NaI melt, but it yet cannot be recommended as an agent for the removal of oxygen-containing admixtures from this melt.     

Determination of Aldehydes and Ketones in Fuel Ethanol by High-Performance Liquid Chromatography with Electrochemical Detection

A new methodology was developed for analysis of aldehydes and ketones in fuel ethanol by high-performance liquid chromatography (HPLC) coupled to electrochemical detection. The electrochemical oxidation of 5-hydroxymethylfurfural, 2-furfuraldehyde, butyraldehyde, acetone and methyl ethyl ketone derivatized with 2,4-dinitrophenylhydrazine (DNPH) at glassy carbon electrode present a well defined wave at +0.94 V; +0.99 V; +1.29 V; +1.15 V and +1.18 V, respectively which are the basis for its determination on electrochemical detector. The carbonyl compounds derivatized were separated by a reverse-phase column under isocratic conditions with a mobile phase containing a binary mixture of methanol / LiClO_4(aq) at a concentration of 1.0 × 10⁻³ mol L⁻¹ (80:20 v/v) and a flow-rate of 1.1mL min⁻¹ . The optimum potential for the electrochemical detection of aldehydes-DNPH and ketones-DNPH was +1.0 V vs. Ag/AgCl. The analytical curve of aldehydes-DNPH and ketones-DNPH presented linearity over the range 5.0 to 400.0 ng mL⁻¹, with detection limits of 1.7 to 2.0 ng mL⁻¹ and quantification limits from 5.0 to 6.2 ng mL⁻¹, using injection volume of 20 μL. The proposed methodology was simple, low time-consuming (15 min/analysis) and presented analytical recovery higher than 95%.     

Voltammetry and amperometric detection of tetracyclines at multi-wall carbon nanotube modified electrodes

The voltammetric behaviour and amperometric detection of tetracycline (TC) antibiotics at multi-wall carbon nanotube modified glassy carbon electrodes (MWCNT-GCE) are reported. Cyclic voltammograms of TCs showed enhanced oxidation responses at the MWCNT-GCE with respect to the bare GCE, attributable to the increased active electrode surface area. Hydrodynamic voltammograms obtained by flow-injection with amperometric detection at the MWCNT-GCE led us to select a potential value E _det = +1.20 V. The repeatability of the amperometric responses was much better than that achieved with bare GCE (RSD ranged from 7 to 12%), with RSD values for i _p of around 3%, thus demonstrating the antifouling capability of MWCNT modified electrodes. An HPLC method with amperometric electrochemical detection (ED) at the MWCNT-GCE was developed for tetracycline, oxytetracycline (OTC), chlortetracycline and doxycycline (DC). A mobile phase consisting of 18:82 acetonitrile/0.05 mol L⁻¹ phosphate buffer of pH 2.5 was selected. The limits of detection ranged from 0.09 μmol L⁻¹ for OTC to 0.44 μmol L⁻¹ for DC. The possibility to carry out multiresidue analysis is demonstrated. The HPLC-ED/MWCNT-GCE method was applied to the analysis of fish farm pool water and underground well water samples spiked with the four TCs at 2.0 × 10⁻⁷ mol L⁻¹. Solid-phase extraction was accomplished for the preconcentration of the analytes and clean-up of the samples. Recoveries ranged from 87 ± 6 to 99 ± 3%. Under preconcentration conditions, limits of detection in the water samples were between 0.50 and 3.10 ng mL⁻¹.     

A study of Lux-Flood acid-base reactions in KBr melts at 800°C

The dissociation of CO₃²⁻ (pK = 2.4 ± 0.2) and precipitation of MgO (pL _MgO = 10.66 ± 0.1) in a KBr melt at 800°C were studied potentiometrically with the use of a Pt(O₂)|ZrO₂|(Y₂O₃) membrane oxygen electrode. The direct calibration of the electrochemical circuit allowed only the equilibrium concentration of O²⁻ (of strong bases) to be determined in the melt. The total concentration of oxygen-containing impurities, including CO₃²⁻ and CO₄²⁻ weak bases, can be found by the potentiometric titration of a sample of KBr by adding MgCl₂ (Mg²⁺), a strong Lux-Flood acid, which causes the decomposition of these oxygen-containing anions. This reaction can also be used to remove oxo anions from alkali metal halide melts.     

Reversed Capillary Electrochromatography: Investigation of Peak Symmetry for Eluting Curves of Solutes

Summary A clean method without use of organic solvents has been developed for isolation and high-performance liquid chromatographic (HPLC) determination of oxytetracycline (OTC) and sulphadimidine (SDD) in cow's milk. Isolation is rapid and simple—homogenization with an inorganic acid solution by means of a handy ultrasonic homogenizer, which is easy-to-use and portable, followed by centrifugation. Reversed-phase HPLC was performed on a C₄ column, with 1.25 mmol L⁻¹ succinic acid solution as mobile phase, and identification was by means of a photodiode-array detector. Separation of the analytes was achieved in less than 8 min. Significant linearity was established over the concentration range of 0.1–1.0 μg mL⁻¹ for both target compounds (r>0.99,P<0.01). Average recoveries of OTC and SDD (each spiked at 0.1–1.0 μg mL⁻¹) were ≥88.8, and inter- and intra-assay variability was ≤2.8%. The total time required for analysis of one sample was <20 min. The limits of quantitation of the method (μg mL⁻¹ in milk) were 0.044 for OTC and 0.023 for SDD. No organic solvent was used at any stage of the analysis.     

Development of an enzyme-linked immunosorbent assay for metolcarb residue analysis and investigation of matrix effects from different agricultural products

The development of a direct competitive enzyme-linked immunosorbent assay based on polyclonal antibodies for N-methylcarbamate insecticide metolcarb is described. Two new haptens for the metolcarb were designed and synthesized. Both haptens were conjugated with keyhole limpet hemocyanin to form the immunogens. Four rabbits were immunized with the immunogens for production of polyclonal antibodies against metolcarb. Antisera titers were tested on the homologous coating antigens using a noncompetitive indirect enzyme-linked immunosorbent assay. The high titer antisera were used to develop the direct competitive enzyme-linked immunosorbent assay for the detection of metolcarb. The antibody–antigen combination with the highest selectivity for metolcarb was further optimized and its tolerance to changes in chemical conditions (ionic strength, pH value, and organic solvent) was studied. Under optimum conditions, the sensitivity and the limit of detection were determined to be 22 μg L⁻¹ and 1.2 μg L⁻¹ respectively. Determination of metolcarb in fruit juices and vegetables was accomplished by simple, rapid, and efficient extraction methods. Recoveries of metolcarb from spiked samples ranged from 80.5% to 109.5%. Validation of the developed immunosorbent assay was conducted by comparison of results from high-performance liquid chromatography. The correlation between the data obtained using developed immunosorbent assay and high-performance liquid chromatography was high (R ² = 0.9884). Therefore, the developed immunosorbent assay in this study was suitable for the rapid quantitative determination of metolcarb in agricultural products.     

Development of a Reversed-Phase Liquid Chromatographic Assay for the Quantification of Total Persipeptides in Fermentation Broth

The emergence and prevalence of multi-drug-resistant bacterial strains increase the potential for outbreaks of incurable infections. The discovery of novel antibiotics and pharmacological preparations requires the identification of novel bioactive small molecules. A specific, sensitive, and reliable quantification method using high-performance liquid chromatography (HPLC) with UV detection was developed for the determination of total persipeptides (A and B), which are cyclic pentapeptides found in the fermentation broth of Streptomyces zagrosensis UTMC 1154 that exhibit bioactivity against methicillin-resistant Staphylococcus aureus (MRSA). A simple liquid–liquid extraction (LLE) method using butanol was employed to extract persipeptides from the fermentation broth prior to HPLC analysis. The chromatographic separation of persipeptides and the internal standard, virginiamycin, was achieved with a gradient of acetonitrile and water on a C18 reversed-phase analytical column in a 25-min analytical run utilizing a flow rate of 0.8 mL min⁻¹ and detection at 210 nm. The whole assay was validated, and the method presented a linear response range with a regression coefficient of determination R ² of 0.9996 for the quantification of persipeptides in the concentration range of 3.9–250.0 µg mL⁻¹, as well as extraction recoveries ranging from 54.78 ± 9.83 % to 56.45 ± 16.33 %. The bias and the precision of the proposed method were <10 %. The detection and quantification limits for the persipeptides were 27 and 83 µg L⁻¹, respectively.