首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
研究了离子色谱-直接电导检测法分离测定离子液体中的卤素离子(F~-、Cl~-、Br~-)杂质.采用Shim-pack IC-A3阴离子交换色谱柱,考察了淋洗液种类及浓度、流速和色谱柱温度对分离测定的影响.最佳色谱条件为:以1.25 mmol/L邻苯二甲酸氢钾为淋洗液,流速1.5 mL/min,色谱柱温45 ℃.在此条件下可以基线分离卤素离子,且NO~-_3、BF~-_4、SO~(2-)_4不干扰测定.该法测定卤素离子的检出限(S/N=3)为0.02 ~0.11 mg/L,峰面积的相对标准偏差(n=5)不大于0.7%,F~-、Cl~- 和Br~- 的标准曲线的线性范围分别为0.1 ~50、0.1 ~50、0.5 ~100 mg/L.将方法用于烷基咪唑四氟硼酸盐离子液体中卤素离子杂质的测定,加标回收率为98% ~102%.  相似文献   

2.
建立氧弹燃烧–自动电位滴定法测定助焊剂中卤素的分析方法。在氧弹罐加入20 mL 0.25 mol/L氢氧化钠溶液作为吸收液,通过氧弹罐燃烧使得助焊剂中共价态的卤素转变成为离子态,利用氢氧化钠溶液吸收氧弹燃烧所释放的离子态卤素,吸收后的溶液用硝酸溶液(1∶1)进行酸化,消除碳酸根、碳酸氢根、氢氧根离子的干扰。处理后的样品溶液用0.01 mol/L硝酸银标准溶液进行滴定。助焊剂样品中卤素测定结果的相对标准偏差为0.51%~3.24%(n=5),加标回收率为95.24%~100.49%。该方法样品处理简单,操作简便,成本低廉。  相似文献   

3.
建立了氧弹燃烧法处理电子产品连接线,离子色谱测定样品中卤素的分析方法。选用TSK-gelSuperIC-AZ阴离子分析柱,以NaHCO3(7.5mmol/L)+Na2CO3(1.1mmol/L)为流动相等度洗脱,抑制电导检测。结果表明,该条件下F-浓度在0.02~2mg/L,Cl-和Br-浓度在0.05~5mg/L范围内峰面积与浓度的线性关系良好(r>0.999),实际样品中卤素回收率为90.52%~97.24%,样品测定结果相对标准偏差均为0.73%~2.01%(n=5)。应用氧弹燃烧-离子色谱法测定电子产品连接线中的卤素离子,方法简便、快捷,测定结果准确。  相似文献   

4.
建立一种可同时测定混合卤素离子的电位滴定新方法.在这种方法中,滴定剂是硝酸银和氟化钠的混合溶液,被滴定液中同时插入了氟离子指示电极和银离子指示电极.在滴定过程中的任一滴定点,溶液中Ag 的浓度和滴定剂的加入体积可由两个电极的电位测定值同时获得,从而可应用多元校正法由相应的滴定曲线求得混合卤素离子中每一种离子的含量.用该方法对混合物样品中的Cl-、Br-、I-进行了同时测定,测定结果的相对标准偏差为0.13%~0.45%(n=5),回收率为97.3%~103.4%.  相似文献   

5.
卤素离子在化学、生物学以及材料学等方面都具有十分重要的作用.在生物体中,氟化物浓度的大小对生物体健康有着重要的影响;卤素化合物经常作为一种阻燃剂被添加到塑料等聚合物产品中,用以提高燃点.因此对于卤素离子的检测具有特别重要的意义.光化学传感器通常是指比色和荧光传感器,它具有选择性好以及灵敏度高等优点.近年来,一些基于卤素离子的化学传感器被广泛地报道.根据主客体分子的类型,卤素离子化学传感器主要包括氟离子化学传感器、碘离子化学传感器、双通道卤素离子化学传感器以及功能化卤素离子化学传感器.综述了近年来不同类型的卤素离子化学传感器的研究进展,总结了该类传感器的合成策略,对未来卤素离子化学传感器的研究方向进行了展望.  相似文献   

6.
采用微波消解技术,将电子电气产品中铅锡合金焊料样品用氢氟酸、硝酸和过氧化氢加热溶解后,加入硼酸以便掩蔽过量的氟离子,用双向视电感耦合等离子体原子发射光谱仪同时测定铅、镉、铬和汞,方法的检出限为0.002 1~0.017 mg·L -1,方法的回收率和精密度分别为94.9%~101.0%和0.25%~3.40%.  相似文献   

7.
采用回流冷凝技术,将电子电气产品中铝合金样品用稀盐酸加热溶解后,用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定电子电气产品铝合金中铅、镉、铬和汞,方法的检出限为0.001 8~0.019 mg.L-1,方法的回收率和精密度分别为92.3%~96.1%和0.16%~3.71%。  相似文献   

8.
建立了利用气相色谱-质谱测定电子、电气产品中多溴二苯醚及多溴苯的方法。对样品的粉碎、提取方法、色谱柱的选择、测定条件进行研究,并自建标准质谱图库;采用保留时间、Br同位素规则、质谱特征离子、谱库检索等4种方式相结合进行定性,避免了假阳性及漏检的情况,结果更加准确可靠。本法检出限为5mg/kg,PBDEs的回收率为91.3%,PBBs的回收率为92.5%,相对标准偏差(RSD)为4.3%。与现有方法相比,本法分离时间最短(6min),具有简便快速、实用性强、灵敏度高、准确可靠等特点,适用于电子电气产品、塑料、橡胶、汽车内饰材料等的溴系阻燃剂分析,满足欧盟RoHS指令检测的要求。  相似文献   

9.
应用密度泛函理论对杯[4]吡咯及卤素取代杯[4]吡咯模型分子的自由主体以及其卤素离子复合物体系进行计算研究.结果表明,杯[4]吡咯β位被卤素拉电子基团取代后,主体分子的构象特征受吡咯单元的偶极影响;β-卤素取代导致了杯[4]吡咯对卤素离子的结合作用增强,且当β位为氯取代时,杯[4]吡咯对卤素离子的结合能力最强.并从振动光谱、NBO电荷布居、相互作用的前线轨道、“活性”构象的偶极矩和Mulliken成键布居等方面阐述β-卤素取代对杯[4]吡咯与卤素离子之间的主-客体相互作用的影响.  相似文献   

10.
氧弹燃烧-离子色谱法测定高分子聚合物的卤素离子   总被引:2,自引:1,他引:1  
采用氧弹燃烧法对塑料样品进行燃烧,用碳酸钠作为吸收液进行吸收,建立了离子色谱法分离测定微量卤素离子的方法.离子色谱条件为:IonPac AS22离子交换柱,碳酸盐等度淋洗,抑制型电导检测.用该方法对塑料颗粒和塑料瓶盖中的氯离子进行测定,加标回收率分别为92.25%~95.68%、92.37% ~95.52%.  相似文献   

11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.  相似文献   

12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

13.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

14.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.  相似文献   

15.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

16.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

17.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

18.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.  相似文献   

19.
Zhanhui Yang  Shiyi Yang  Jiaxi Xu 《Tetrahedron》2017,73(23):3240-3248
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.  相似文献   

20.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号