Positive and negative ion chemistry of the anesthetic halothane (1-bromo-1-chloro-2,2,2-trifluoroethane) in air plasma at atmospheric pressure

The ion chemistry of 1-bromo-1-chloro-2,2,2-trifluoroethane (the common anesthetic halothane) in air plasma at atmospheric pressure was investigated by atmospheric pressure chemical ionization mass spectrometry (APCI-MS). The major positive ion observed at low declustering (API interface) energies is the ionized dimer, M(+.)M, an unexpectedly abundant species which possibly is stabilized by two H-bonding interactions. At higher energies [M--HF](+.) and [M--Br](+) prevail; the former, corresponding to ionized olefin [ClBrC=CF(2)](+.), appears to originate from M(+.)M and is quite stable towards fragmentation. The latter fragment ion ([M--Br](+)) and its analogue, [M--Cl](+), which is also observed though at much lower abundance, are originally ethyl cations (+)CHX--CF(3) (X = Br, Cl) which, upon collisional activation, rearrange and fragment to CHFX(+) via elimination of CF(2). All of the above described ions are also observed in humid air: in addition, the oxygenated ion [ClBrC=CFOH](+.) also forms in humid air via water addition to [ClBrC=CF(2)](+.) and HF elimination, as observed earlier for ionized trichloroethene. In contrast with similar chloro- and fluoro-substituted ethanes, halothane does not react with H(3)O(+) in the APCI plasma, a result confirmed by selected ion APCI triple-quadrupole (TQ) experiments. Major negative ions formed from halothane in the air plasma are Br(-) and, to a lesser extent, Cl(-), and their complexes with neutral halothane. APCI-TQ experiments indicated that Br(-) and Cl(-) are formed via reaction of halothane with O(2) (-.), O(2) (-.)(H(2)O) and O(3) (-.), possibly via dissociative electron transfer or nucleophilic substitution. Competing proton transfer was also observed in the reaction with O(2) (-.) and, at high halothane pressure, also with O(2) (-.)(H(2)O); at lower pressures the molecular anion M(-.) was observed instead. The other minor anions of the air plasma, NO(2) (-), N(2)O(2) (-.) and NO(3) (-), were found to be unreactive towards halothane.     

Selective ionization for elemental analysis with an ion trap mass spectrometer

The ion storage capacity (<10⁶) of ion trap mass spectrometers (ITMS) can sometimes limit the ability to analyze trace components in complex mixtures. We demonstrate here that resonant laser ablation (RLA) can offer a degree of selectivity in the ionization process, thus allowing the preferential accumulation of analyte ions in the trap. Selectivities of 75 and 50, for chromium and iron, respectively, are reported here for RLA of stainless steel in an ITMS. We offer suggestions to improve both the selectivity and the ionization efficiency, relative to the results reported here.     

Sodium dithionite initiated reactions of 1-bromo-1-chloro-2,2,2-trifluoroethane with enol ethers of cyclic ketones

Sodium dithionite initiated reactions of 1-bromo-1-chloro-2,2,2-trifluoroethane (1) with methyl and trimethylsilyl ethers of cyclopentanone and cyclohexanone enols (2a-d) in a MeCN/H₂O system were investigated. 2-(2,2,2-Trifluoroethylidene)cyclopentanone (4a) and 2-(2,2,2-trifluoroethylidene)-cyclohexanone (4b), respectively, were obtained as the main products and isolated in reasonable yields. The reaction with a 1:1 mixture of 5- and 3-methyl substituted 1-methoxycyclohexenes, 2e and 2f, revealed strong influence of steric hindrance on the reaction rate; a mixture of 2-(2,2,2-trifluoroethylidene)-5-methylcyclohexanone (6) and 2-(2,2,2-trifluoroethylidene)-3-methylcyclohexanone (7) in a 9:1 ratio was formed. Ketones 4a and 4b were reduced to the corresponding alcohols 8 and 9 and the reaction of 4b with hydrazine gave an indazole derivative 10.     

The highly stereoselective decarboxylation of (+)-1-bromo-1-chloro-2,2,2-trifluoropropanoic acid to give (+)-1-bromo-1-chloro-2,2,2-trifluoroethane [(+)-halothane] with retention of configuration

The absolute configuration of the title acid 2 has been determined to be S by X-ray crystallography. Thus, decarboxylation of 2 produces (S)-(+)-halothane with 99% retention of configuration. This behavior is compared to other stereoselective decarboxylation reactions of α-haloacids from the literature that also gave high degrees of retention of configuration when in the form of their quaternary ammonium salts, which contain one proton. The proton of the ammonium salt is necessary in order to protonate the anionic intermediate formed from decarboxylation. In the absence of this relatively acidic proton, we had previously found that using triethylene glycol (TEG) as both the solvent and proton source for the decarboxylation reaction of acid 2 caused poor stereoselectivity. This was in contrast to 1,2,2,2-tetrafluoro-1-methoxypropionic acid 6, which showed a high degree of retention of configuration in TEG. In order to rationalize this differing behavior, we report DFT studies at PCM-B3LYP/6-31++G⁷ level of theory (the results were additionally confirmed with 6-311++G⁷ and aug-cc-pVDZ basis sets). The energy barrier to inversion of configuration of the anionic reaction intermediate 11 of acid 2 is 10.23 kcal/mol. However, we find that the anionic intermediate 10 from acid 6 would rather undergo β-elimination instead of inversion of configuration. Thus the planar transition state required for inversion of configuration is never reached, regardless of the rate of proton transfer to the anion.     

Development and characterization of an electrospray ionization ion trap/linear time-of-flight mass spectrometer

On-line analysis of compounds from solution has been greatly facilitated by the advent of electrospray ionization mass spectrometry (ESI-MS). Although quadrupole mass analyzers are most commonly used with ESI at present, time-of-flight (TOF) mass spectrometers offer several potential advantages including high data acquisition rates, which are desirable for fast separation techniques. One method of coupling ESI and TOF uses an ion trap for temporary storage and accumulation of the electrosprayed ions prior to TOF mass analysis. Previous studies have not fully addressed the effects of several key variables on the analytical capabilities of this type of instrument. In this study, the characterization of an ion trap/linear TOF instrument for ESI is described. The behavior of various analytes is divided into two separate groups; each one is found to have its own optimal set of operating conditions. The reasons for the observed differences between groups are explored. Issues relevant to mass resolution, sensitivity, mass range, mass-to-charge ratio discrimination, and mass measurement accuracy are addressed. Finally, it is suggested that the analytical capability of this type of instrument could be significantly improved by changing the ion optics from the existing focusing lenses to a rf-only quadrupole lens.     

1-Bromo-1-chloro-2,2,2-trifluoroethane (Halothane) as a building block for fluorine compounds

This review provides an overview of several synthetic applications of the first fluorinated anaestetic, 1-bromo-1-chloro-2,2,2-trifluoroethane, leading to convenient preparation of numerous fluorine, and particularly, CF₃ group containing compounds via organometallic (Mg, Zn) and free radical “sulphinatodehalogenation” reactions.     

(Vapour + liquid) equilibria and excess molar enthalpies for mixtures with strong complex formation. Trichloromethane or 1-bromo-1-chloro-2,2,2-trifluoroethane (halothane) with tetrahydropyran or piperidine

Isothermal (vapour  +  liquid) equilibria were measured for (trichloromethane  +  tetrahydropyran or piperidine) at T =  333.15 K and {1-bromo-1-chloro-2,2,2-trifluoroethane (halothane)  +  tetrahydropyran or piperidine} atT =  323.15 K with a circulation still. The results were verified by effective statistical procedures and used to calculate activity coefficients and excess molar Gibbs free energiesG_m^E . Excess molar enthalpiesH_m^E for these mixtures were determined at T =  298.15 K by means of an isothermal CSC microcalorimeter equipped with recently reconstructed flow mixing cells. Reliable performance of the calorimetric setup was proved by the good agreement of H_m^Efor (hexane  +  cyclohexane), (2-propanone  +  water), and (methanol  +  water), with the best literature results. The trichloromethane- or halothane-containing mixtures exhibit strong negative deviations from Raoult’s law and are highly exothermic, thus indicating that complex formation via hydrogen bonding is a governing nonideality effect. A close similarity in the behaviour of corresponding mixtures with trichloromethane and halothane is observed, but for halothane-containing mixtures,G_m^E and H_m^Eare consistently more negative, confirming that halothane is a more powerful proton donor than chloroform.     

Fragmentation of phosphopeptides in an ion trap mass spectrometer

A systematic study of the fragmentation pattern of phosphopeptides in an electrospray (ESI) ion trap mass spectrometer is presented. We show that phosphotyrosine- and phosphothreonine-containing peptides show complicated fragmentation patterns. These phosphopeptides were observed to lose the phosphate moiety in the form of H₃PO₄ and/or HPO₃, but were also detected with no loss of the phosphate group. The tendency to lose the phosphate moiety depends strongly on the charge state. Thus, the highest observed charge state tends to retain the phosphate moiety with extensive fragmentation along the peptide backbone. We also show that phosphoserine-containing peptides have relatively simple fragmentation patterns of losing H₃PO₄. This loss is independent of the charge state. We suggest strategies for the accurate identification of phosphorylation sites using the ion trap mass spectrometer.     

A library of atmospheric pressure ionization daughter ion mass spectra based on wideband excitation in an ion trap mass spectrometer

A searchable library of MS/MS spectra obtained using a quadrupole ion trap mass spectrometer and electrospray or atmospheric pressure chemical ionization is presented. The application of wideband excitation (activation) and normalized collision energy leads to highly reproducible mass spectra which are searched using the NIST algorithm. Flow injection and LC/MS/MS applications of this powerful technique in the biomedical (diastereoisomeric steroids, morphine glucuronides, isovalerylcarnitine) and environmental (pirimicarb and desmethyl-pirimicarb) areas are described.     

Mass-selected reagent ion chemical ionization and multiple tandem mass spectrometry techniques in an ion trap mass spectrometer for structural analysis

Mass-selected reagent ion chemical ionization (CI) performed in an ion trap instrument is an efficient tool to investigate gas-phase ion reactivities and therefore to find out new and/or optimized applications for structural analysis. For instance, it was shown that the C₃H₆O^{+ .} (58 mass units) molecular ion originated from vinyl methyl ether (VME) should necessarily be used alone (i.e. unit-mass selected) to produce significant diagnostic-ions for double bond location in aliphatic alkenes. Regarding the assignment of epoxides, the previous NO⁺/CI method was adapted for an optimal use in the trap through isolation of NO⁺ cation from N₂O (instead of NO) plasma and production of the acylium diagnostic-ions via CID of [M − H]⁺ formed by NO⁺-induced hydride abstraction. New alkylation ion-products, e.g. RCH = O⁺-al , were also found to characterize isomeric epoxides as a result of either an initial electrophilic addition of the C₂H₅⁺ cation (with saturated epoxides) or a methyl-transfer from [VME]^{+ .} (with α,β-unsaturated epoxides). The multiple tandem mass spectrometry (MSⁿ) capabilities of the ion trap were essential to achieve reagent ion mass-selection, structural assignment of the diagnostic-ions, or to provide further selectivity. © 1997 John Wiley & Sons, Ltd.     

Application of self-ionization for enhancing stereochemical and positional effects from arylglycosides under electron ionization conditions in an ion trap mass spectrometer

Ion trap mass spectrometry has been used to structurally characterize and differentiate positional and stereo isomers of arylglycosides having potential antioxidant properties. The use of the self-ionization (SI) technique has allowed to evidence a strong reactivity of fragment ions produced from dissociations of the molecular ion towards the molecules introduced into the trap. Specific structural effects due to positional isomers and anomers have been also envisaged through the occurrence of bimolecular processes inside the ion trap analyzer. Under self-ionization conditions, even-electron ions are produced. The charge is retained on the sugar moiety, in agreement with its proton affinity higher than that of the substituted phenol moiety. Most of the fragmentation pathways involve elimination of acetic acid that protects the hydroxylic groups of the glycoside. SI also produces adduct ions, likely as covalent species, having higher m/z values than the molecular ion. The reaction site is mainly the double bond present in the pyranosidic ring. Even if some fragment ions have lost the initial stereochemistry, their formation can be related to the structure of the parent neutrals introduced into the cell. Collision-induced dissociation (CID) experiments, carried out on ions formed by ion-molecule reactions, have allowed to obtain further information on gas phase ion structures. The study of mass-selected ion-molecule reactions and their kinetics have evidenced a spectacularly different reactivity of the ion at m/z 111 towards the two anomers 2alpha and 2beta, with the latter showing a much more pronounced reactivity. The approach developed in this work revealed to be an useful tool in structural characterization, as well as in stereo and regiochemical differentiation of arylglycosides.     

Identification of137Cs in an individual microparticle by laser desorption/ionization ion trap mass spectrometer

The detection of radiocesium in microparticles was performed by using an ion trap mass spectrometer coupled with laser desorption and ionization. Pulsed laser desorbed particle and the resulted ions were analyzed by an ion trap mass analyzer. The presence of radiocesium, especially about¹³⁷Cs, in microparticles was verified by single as well as successive particle analysis. The detection limit was reached to ≈ag/particle level with a signal-to-background ratio of 4. The inhomogeneous distribution of particle size and the irregular shapes of particle limit the quantitative evaluation of¹³⁷Cs concentration in the microparticle. But this high sensitivity allows to monitor directly the radiocesium from small amounts of a microparticle sample.     

Fragmentation pathways of selectively labeled uropranolol using electrospray ionization on an ion trap mass spectrometer and comparison with ions formed by electron impact

Propranolol, deuterium- and 18O-labeled propranolol and related compounds were analyzed using an ion trap mass spectrometer equipped with a modified Finnigan API electrospray interface. Sequential product ion (MSn) experiments were used to elucidate fragmentation pathways for these compounds. The observed ions were compared to those observed under electron impact (EI) conditions. The electrospray ionization (ESI) ion trap spectra, as well as the EI spectra, afford useful information to allow assignments of most product ions, many of which retain portions of the aliphatic three-carbon side chain.     

Characterisation of new pyridazinofurocoumarins by electron ionisation and multiple stage tandem mass spectrometry using an ion trap mass spectrometer

The inverse electron-demand Diels-Alder reaction between furocoumarinones and 3,6-bis(methoxycarbonyl)-1,2,4,5-tetrazine was used to give pyridazinofurocoumarins in good yields. The structural characterisation of the synthesised compounds was achieved by NMR spectroscopy. The mass spectrometric behaviour was studied under electron ionisation conditions via sequential product ion fragmentation experiments (MS(n)). This study allowed the evaluation of the role played by the methyl substituent on the benzene ring of pyridazinofurocoumarins in their fragmentation pathways.     

Product ion scanning using a Q-q-Q linear ion trap (Q TRAP) mass spectrometer

The use of a Q-q-Q(linear ion trap) instrument to obtain product ion spectra is described. The instrument is based on the ion path of a triple quadrupole mass spectrometer with Q3 operable as either a conventional RF/DC quadrupole mass filter or a linear ion trap mass spectrometer with axial ion ejection. This unique ion optical arrangement allows de-coupling of precursor ion isolation and fragmentation from the ion trap itself. The result is a high sensitivity tandem mass spectrometer with triple quadrupole fragmentation patterns and no inherent low mass cut-off. The use of the entrance RF-only section of the instrument as accumulation ion trap while the linear ion trap mass spectrometer is scanning enhances duty cycles and results in increased sensitivities by as much as a factor of 20. The instrument is also capable of all of the triple quadrupole scans including multiple-reaction monitoring (MRM) as well as precursor and constant neutral loss scanning. The high product ion scanning sensitivity allows the recording of useful product ion spectra near the MRM limit of quantitation.     

Adduction of solvent molecules by ions isolated within an ion trap mass spectrometer under atmospheric pressure ionisation conditions

Benzylpyridine and papaverine, an alkyl quinoline, both produce product ions containing an azepinium ring during atmospheric pressure chemical ionisation or electrospray multistage mass spectrometry. By controlling the trapping conditions, an isolated azepinium ion was held within the trap for an extended period of time without excitation. A subsequent analytical scan revealed a mass spectrum containing ions at two mass-to-charge (m/z) ratios, the first at the m/z of the isolated product ion and the second at an m/z ratio corresponding to the adduction of a molecule of solvent. Isolation and resonance excitation of the adduct ion remove the solvent molecule, resulting in recovery of the azepinium ion at the same signal intensity as the adduct ion. Isolating and trapping the ion for a further period allowed the solvent adduct ion to be re-formed. Modulation of the solvent flowing into the source while the ion was trapped allowed variation in the solvent molecule adducted to the trapped ion. The proportion of the ion current due to the adduct ion depends on the nature of the isolated ion, the proton affinity of the solvent and the length of time for which the ion was trapped. Adduct ion formation, deliberately maximised in this study, can occur to a significant extent under standard ion trap operating conditions, reducing the ion current of product ions of interest and, ultimately, the response in tandem mass spectrometric assays.     

Fragmentation of N-linked glycans with a matrix-assisted laser desorption/ionization ion trap time-of-flight mass spectrometer

N-Linked glycans were ionized from several matrices with a Shimadzu-Biotech AXIMA-QIT matrix-assisted laser desorption/ionization quadrupole ion trap time-of-flight mass spectrometer. [M+Na]+ ions were produced from all matrices and were accompanied by varying amounts of in-source fragmentation products. The least fragmentation was produced by 2,5-dihydroxybenzoic acid and the most by alpha-cyano-4-hydroxycinnamic acid and 6-aza-2-thiothymine. Sialic acid loss was extensive but could be prevented by formation of methyl esters. Fragmentation produced typical low-energy-type spectra dominated by ions formed by glycosidic cleavages. MS(n) spectra (n = 3 and 4) were used to probe the pathways leading to the major diagnostic ions. Thus, for example, an ion that was formed by loss of the core GlcNAc residues and the 3-antenna was confirmed as being formed by a B/Y rather than a C/Z mechanism. The proposed structures of several cross-ring cleavage ions were confirmed and it was shown that MS3 spectra could be obtained from as little as 10 fmol of glycan.