Planar Four-Coordinate Carbon in Star-Like Perlithioannulenes C<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Li<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 3–6)

The structure and stability of perlithioannulenes C _n Li _n (n = 3–6) were examined ab initio [MP2(full)/6-311+G**] and in terms of the density functional theory (B3LYP/6-311+G**). The systems with n = 3, 5, and 6 may be stabilized as planar star-like structures with bridging lithium atoms and hypercoordinate carbon atoms. Star-like structures are the most stable isomers of odd-numbered annulenes (n = 3, 5), while the most stable isomers of even-numbered annulenes (n = 4, 6) have less symmetric nonplanar structures.     

Fast evaluation of molecular auxiliary functions <Emphasis Type="Italic">A</Emphasis><Subscript>α</Subscript> and <Emphasis Type="Italic">B</Emphasis><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> by analytical relations

Analytical relations through the initial values are derived for the molecular auxiliary functions A _α (x) and B _n (x), where α =n+ɛ, 0⩽ ɛ < 1 and n=0,1,2,.... These relations are useful in the fast calculation of multicenter molecular integrals over integer and noninteger n Slater type orbitals. It is shown that the formulas obtained are numerically stable for all values of n,ɛ and x.PACS No: 31.15.+q, 31.20.EjAMS subject classification: 81-V55, 81-V45     

Synthesis of (Ni<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)<Subscript>2</Subscript>P (0 ≤ <Emphasis Type="Italic">x</Emphasis> ≤ 0.65) substitution solid solution

The phosphides (Ni_{1 ? x} Co _x )₂P (0 ≤ x ≤ 0.65) crystallizing in the hexagonal system, space group P \(\bar 6\)2m, were synthesized in two steps starting from the continuous solid solution (Ni_{1 ? x} Co _x )₃(PO₄)₂ · 8H₂O. The initial phosphates were first completely dehydrated at 800°C and then reduced with hydrogen at 900–1000°C for 1–2 h.     

TiO<Subscript>2</Subscript>/TiO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>N<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> nanocomposite and its acetaldehyde photodecomposition ability

Nitrogen-doped titania was coupled with the commercial titania nanoparticles by mechanical milling in liquid medium. The as-prepared nanocomposites (TiO₂/TiO_2−x N _y ) were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area, UV–Vis spectroscopy, chemiluminescence, and acetaldehyde decomposition activity techniques. When a small amount of nitrogen-doped titania was added into the commercial titania, higher intensity and longer lifetime of ¹O₂ was observed, and the photocatalytic activity was efficiently improved. The TiO_2−x N _y acts as the acceptor of photoinduced holes. The recombination of the electron-hole was effectively depressed by the heterogeneous electron transfer. This could be an effective way to obtain highly active photocatalysts.     

Magnetic properties of CuCr<Subscript>2–<Emphasis Type="Italic">х</Emphasis></Subscript>Sb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript>4</Subscript> (<Emphasis Type="Italic">х</Emphasis> = 0–0.5) solid solutions

Magnetic properties of spinel solid solutions CuCr_2–х Sb _x Se₄ (х = 0–0.5) were measured in the temperature range 5–300 K in a constant (50 Oe and 10 kOe) magnetic field. The results are interpreted in terms of the ionic model suggested earlier for CuCr₂Х₄ compounds.     

Thermodynamic investigation of the systems <Emphasis Type="Italic">Ln</Emphasis>Se<Subscript>2</Subscript>–<Emphasis Type="Italic">Ln</Emphasis>Se<Subscript>1.5</Subscript> (<Emphasis Type="Italic">Ln</Emphasis> = La,Nd)

A detailed thermodynamic study of the systems LnSe₂–LnSe_1.5 (Ln = La, Nd) was performed by static method of vapour pressure measurement using quartz membrane-gauge manometers within the temperature range 713–1,395 K. The p _Se–T–x dependences obtained in this study have shown that the phase regions in composition intervals studied consist of discrete phases: LnSe_1.95 LnSe_1.90, LnSe_1.85, LnSe_1.80 (Ln = La, Nd). The enthalpies and the entropies for the stepwise dissociation process were calculated from the experimental data. The standard enthalpies of formation and the absolute entropies were estimated for the compounds investigated using literature data.     

Potassium–conducting K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Pb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> solid electrolytes

Solid electrolytes with potassium-cation conductivity in the K_{1 − 2x} Pb _x GaO₂ system were synthesized and studied. It was found that solid solutions based on potassium monogallate are formed in a wide range of compositions. They contain vacancies in the potassium sublattice that provide for high conductivity of electrolytes. The relationship is considered between electric characteristics of solid electrolytes and the composition and structure of solid solutions. The results are compared to the earlier obtained data for similar solid electrolytes based on potassium monoaluminate and monoferrite.     

Potassium-conducting solid electrolytes in K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> system

New solid electrolytes with a high conductivity by K⁺ ions in the K_{1 − 2x} Sr _x GaO₂ system are synthesized and studied. It is found that the introduction of Sr²⁺ ions into potassium monogallate leads to the formation of solid solutions with KGaO₂ structure in a wide range of additive concentration. These solid solutions exhibit a high conductivity; the conductivity increases monotonically with increasing concentration of strontium within the single-phase range. The electrical characteristics are related to the electrolyte structure. The results are compared with the earlier data for the gallate solid electrolytes with the additives of four-charged cations and the systems based on potassium monoferrite and monoaluminate.     

Isomerization reactions of RSNO (R=H,C<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>H<Subscript>2<Emphasis Type="Italic">n</Emphasis>+1</Subscript><Emphasis Type="Italic">n</Emphasis>≤ 4)

We have applied various theoretical methods to gain detailed insights into the isomers as well as the transition states (TSs) along the corresponding reaction pathways for RSNO (R=H, C _n H_2n+1 n ≤ 4). On the basis of G2 and G2MP2 results, the relative order of stability for R=H is estimated to be trans-HSNO > cis-HSNO > HNSO > cis-HONS trans-HONS, while it is cis-CH₃SNO trans-CH₃SNO > CH₃NSO > trans-CH₃ONS > cis-CH₃ONS for R=CH₃. A similar trend is also obtained from the B3P86 method with considerably less computing effort if the nearly isoenergetic isomers cis-HONS and trans-HONS are ignored. Based on the results of B3P86, cis-RSNO is more stable than trans-RSNO when R=H is replaced by alkyl groups except for R=t-Bu. Natural bond orbital analyses allow us to explore whether the high reactivity of S-nitrosothiols is due to the strong negative hyperconjugation (). The mesomeric effect of S-nitrosothiols, although non-negligible, does not cause the breakage of N–O bond due to the compensation of columbic attraction between N and O.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

<Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> Diagram of MgO–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System: Microstructure Design

A computer model of the T–x–y diagram of MgO–SiO₂–Al₂O₃ system is used to show the possibility of analysis of its microstructure constitution in terms of competition between primary and eutectic crystals by means of vertical mass balance diagrams calculated for a given centroid over the whole temperature range. The usefulness of horizontal mass balance diagrams is considered for studying phase relations at a fixed temperature along the chosen isopleth. Mass balances were used to determine the crystallization path at the quasi-peritectic liquidus point with the invariant reaction L + Al₂O₃ = 3Al₂O₃ · 2SiO₂ + MgO · Al₂O₃, whose composition was taken into account in giving a rationale to corundum armor element technology.     

Ionic conduction of Li<Subscript>8 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Mg<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>ZrO<Subscript>6</Subscript> solid solutions

A boundary of existence of solid solutions in the Li_8−2x Mg _x ZrO₆ system is found to be 7 mol % MgO. The transport properties of Li_{8 − 2x} Mg _x ZrO₆ solid solutions (the electronic component of total conductivity, the temperature and concentration dependences of conductivity and activation energy) are studied. It is supposed that, for Li₈ZrO₆ phase and solid solution based on it, an abrupt change of conductivity in the temperature range from 663 to 713 K is caused by the transition of electrolyte into the superionic state.     

Thermal analysis of the Ce<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Tb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> pigments

Compounds based on CeO₂ were synthesized as high-temperature environment-friendly inorganic pigments with interesting hues. The pigments have been synthesized by using the solid state reaction in the temperature range from 1,300 to 1,600 °C. The host lattice of these pigments is CeO₂ that is doped by terbium ions. The incorporation of doped ions provides interesting orange colours after application into ceramic glaze. The goal was to develop conditions for the synthesis of these compounds and to determine the influence of calcination temperature on their colouring effects. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. The pigments were also evaluated from the standpoint of their structure and particle sizes.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Electronic peltier effect in Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>(2 − <Emphasis Type="Italic">x</Emphasis>) − δ</Subscript>S

Temperature dependences of the Peltier coefficient are studied in the temperature range of 300–700 K under variation of the composition of the Li _x Cu_{(2 − x) − δ}S samples. The obtained values of the Peltier coefficient of the Li_0.05Cu_{1.95 − δ}S samples with a different copper content are within the range of 0.1–0.4 J/A, which is somewhat higher than the similar parameters of bismuth telluride, the basic material of semiconductor coolers.     

Phenyl(trimethylsiloxy)fluorosiloxanes PhSi(OSiMe<Subscript>3</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>F<Subscript>3−<Emphasis Type="Italic">n</Emphasis></Subscript>

The siloxane bond splitting reaction in hexamethyldisiloxanes PhSiCl _n F_3?n was studied.     

HNO(H<Subscript>2</Subscript>O)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1–4) clusters: a theoretical study

The geometrical structure, binding energy, and vibrational spectra of small clusters of nitrosyl hydride (HNO) and water molecules, HNO(H₂O) _n , where (n = 1–4), have been investigated at the MP2 level of theory, using 6-311++G(2d,2p) basis set. We located three dimers, six trimers, nine tetramers, and three pentamers at the MP2/6-311++G(2d,2p) computational level. Particular attention is given to existence and magnitude of NH···O blue-shifting hydrogen bonds. Blue shifts of the NH stretching frequency upon complex formation in the ranges between 28 and 151 cm⁻¹ is predicted. Cooperative effect in terms of stabilization energy along with the many-body interaction energies analysis was performed for the studied clusters. The Atoms in Molecules (AIM) theory was also applied to explain the nature of the complexes.     

Sol-Gel Synthesis and Properties of Y<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Ba<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> Nanocrystals

The sol-gel method was used to prepare Y_1–xBa_xFeO₃ (x = 0, 0.05, 0.1, 0.15, 0.2) nanocrystals. The influence of the dopant content on the particle size and magnetic properties of yttrium ferrite was examined.