酸处理活性炭催化水合肼还原硝基苯(英文)

以水合肼为还原剂,采用硝酸、盐酸、硫酸及氮气或氢气氛处理的活性炭为催化剂,考察了其催化硝基苯还原反应性能.结果表明,经化学处理后,活性炭表面形成了各种含氧官能团,它们可引发水合肼分解,并影响硝基苯的吸附.活性炭表面形成的含氧官能团越多,其催化硝基苯还原速率越快.其中经盐酸处理的活性炭表面形成的含氧官能团最多,因而表现出最高的硝基苯还原活性.     

The role of oxygen functionalities and edge plane sites on screen-printed carbon electrodes for simultaneous determination of dopamine,uric acid and ascorbic acid

The role of oxygen functionalities and edge plane sites on disposable screen-printed carbon electrodes (SPCE) was evaluated for simultaneous determination of dopamine, uric acid and ascorbic acid in this study. Both electrochemically preanodized and oxygen plasma treated SPCEs were adopted for the purpose of partially differentiating these two effects. Raman and XPS analyses verify that different treatment can indeed induce different surface characteristics. The electrocatalytic activity thereby increases by the substantial increase in surface bound carbon–oxygen functional groups and/or the generation of edge plane sites through surface reorientation. Possible mechanism is proposed to explain the voltammetric behavior. The peaks for dopamine, uric acid and ascorbic acid are especially well-resolved from each other at the electrochemically preanodized SPCE and simultaneous detection at neutral pH can thus be obtained by this simple approach.     

Functionalized multiwall carbon nanotube/gold nanoparticle composites

Multiwall carbon nanotubes (MWCNTs) were chemically oxidized in a mixture of sulfuric acid and nitric acid (3:1) while being ultrasonicated. The effect of oxidative ultrasonication at room temperature on development of functional groups on the carbon nanotubes was investigated. The dispersability and the carboxylic acid group concentration of functionalized MWCNTs (fMWNTs) varied with reaction time. The concentration of carboxylic acid groups on fMWNTs increased from 4 x 10(-4) mol/g of fMWNTs to 1.1 x 10(-3) mol/g by doubling the treatment period from 4 to 8 h. The colloidal stability of aqueous fMWCNTs dispersions was enhanced through elongated oxidation. fMWCNTs that were reacted longer than 4 h did not precipitate in aqueous media for at least 24 h. The layer-by-layer self-assembly of polyelectrolytes on fMWCNTs was characterized by zeta potential measurements. The zeta potential of fMWCNTs changed from negative charge to positive charge when cationic polyelectrolytes were self-assembled on their surface. With addition of anionic polyelectrolytes, cationic polyelectrolyte coated fMWCNTs showed the expected charge reversal as expected for multilayer self-assembly. Complex formation of positively charged gold nanoparticles and negatively charged fMWCNTs was achieved with and without polyelectrolyte coatings by electrostatic interaction. The complex formation was characterized by high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. The here found complex formation of positively charged colloidal gold and defect sites on fMWNTs indicates the location of functional groups on carbon nanotubes. It is suggested that positively charged colloids such as gold nanoparticles could be used for detection of defect sites on carbon nanotubes.     

Electrochemically Stimulated Insulin Release from a Modified Graphene‐functionalized Carbon Fiber Electrode

A graphene‐functionalized carbon fiber electrode was modified with adsorbed polyethylenimine to introduce amino functionalities and then with trigonelline and 4‐carboxyphenylboronic acid covalently bound to the amino groups. The trigonelline species containing quarterized pyridine groups produced positive charge on the electrode surface regardless of the pH value, while the phenylboronic acid species were neutral below pH 8 and negatively charged above pH 9 (note that their pK_a=8.4). The total charge on the monolayer‐modified electrode was positive at the neutral pH and negative at pH > 9. Note that 4‐carboxyphenylboronic acid was attached to the electrode surface in molar excess to trigonelline, thus allowing the negative charge to dominate on the electrode surface at basic pH. Negatively charged fluorescent dye‐labeled insulin (insulin‐FITC) was loaded on the modified electrode surface at pH 7.0 due to its electrostatic attraction to the positively charged interface. The local pH in close vicinity to the electrode surface was increased to ca. 9–10 due to consumption of H⁺ ions upon electrochemical reduction of oxygen proceeding at the potential of −1.0 V (vs. Ag/AgCl) applied on the modified electrode. The process resulted in recharging of the electrode surface to the negative value due to the formation of the negative charge on the phenylboronic acid groups, thus resulting in the electrostatic repulsion of insulin‐FITC and stimulating its release from the electrode surface. The insulin release was characterized by fluorescence spectroscopy (using the FITC‐labeled insulin), by electrochemical measurements on an iridium oxide, IrO_x, electrode and by mass spectrometry. The graphene‐functionalized carbon fiber electrode demonstrated significant advantages in the signal‐stimulated insulin release comparing with the carbon fiber electrode without the graphene species.     

Carbon nanotubes as conducting support for potential Mn-oxide electrocatalysts: Influences of pre-treatment procedures

Different oxygen and nitrogen containing functional groups were created on the surface of the multiwalled carbon nanotubes. The multi-walled carbon nanotubes were treated in ultrasonic bath with sulfuric or nitric acid. Furthermore the surface texture was modified by increase of the roughness. In particular after treatment with the oxidizing nitric acid, in comparison to the H_2SO_4 or ultra-sonic treated samples,craters and edges are dominating the surface structures. Manganese oxide was deposited on the multiwalled carbon nanotubes by precipitation mechanism. Various manganese oxides are formed during the deposition process. The samples were characterized by elemental analysis, microscopy, thermal analysis,Raman spectroscopy, and by the zeta potential as well as X-ray diffraction measurements. It was shown that the deposited manganese oxides are stabilized rather by surface texture of the multi-walled carbon nanotubes than by created functional groups.     

Catalytic oxidation with air of cyclohexanone to dicarboxylic acids on synthetic carbons. Effect of supported metals and solvents

The oxidation with air of cyclohexanone was conducted in the presence of synthetic carbons catalysts. The effect of carbon activation treatment (CO2 or air burnoff), phosphorus additive, platinum loading, and nature of the solvent (water or water/acetic acid mixture) were studied. Cyclohexanone oxidation at 140 degrees C yielded a mixture of C6, C5, and C4 dicarboxylic acids. Air activated carbons, including those containing phosphorus or those supporting platinum, resulted in a higher yield of adipic acid. The activity and selectivity was associated with the oxygenated functional groups, essentially carbonyl/quinone groups, created during air activation of the carbon. The incorporation of phosphorus into the carbon increased slightly the selectivity to 34.3%, probably because this additive increased the density of oxygenated functional groups. The deposition of platinum by impregnation and liquid-phase reduction with formaldehyde increased the reaction rate and improved the selectivity to adipic acid, where the highest figure was 38.8%. It was suggested that platinum contributed to molecular oxygen activation. In contrast platinum deposition by cationic exchange followed by reduction under H2 resulted often in a detrimental effect probably because the density of the oxygenated groups on carbon is decreased upon H2 reduction in the presence of platinum. When the oxidation of cyclohexanone was carried out in mixtures of water/acetic acid, the selectivity given by the different samples were quite close and generally smaller than those obtained in water which indicates that acetic acid interacts with the oxygenated surface functional groups responsible for the activity and selectivity. Oxidation experiments with methyl-labeled 4-methylcyclohexanone indicated that glutaric acid was produced by oxidative decarbonylation of both the C1 and C2 carbon atoms of the molecule.     

Effects of Surface Oxygen of Activated Carbon on Alkaloid Adsorption: A Molecular Dynamics Simulation Study

The influence of the density and the type of surface oxygen on the adsorption of berberine alkaloid onto activated carbon was investigated using the molecular dynamics simulation method in vacuum. The carbon surface consisted of a basal plane of graphite and surface oxygen groups which were bonded on the graphite plane in a regular square array with various densities. Two types of surface oxygen groups, =O and —OH, were employed. The simulation results showed that the berberine alkaloids were favorable to be adsorbed on the negative charged carbon surfaces. It was indicated that the vdw attraction of the carbon surface to the alkaloid molecule dominates the adsorption only at the lower surface density of oxygen. It is also indicated that a good adsorptive selectivity for a certain berberine alkaloid can be obtained by controlling the density of surface oxygen.The adsorption simulation of berberine alkaloids onto activated carbon in the presence of water was also carried out by using a dome-shape molecular model for presenting the alkaloid/water/carbon system. It was found that the adsorption of berberine alkaloids on the activated carbon which has a higher density of surface oxygen was strongly inhibited by the presence of water.     

多壁纳米碳管空气电极的交流阻抗研究

研究了多壁纳米碳管、活性炭和石墨等空气电极的交流阻抗特性.结果表明,纳米碳管空气电极的阻抗谱由两个半圆组成,高频区半圆对应欧姆极化阻抗,低频区半圆对应电化学极化阻抗.催化剂Pt以纳米颗粒的形式沉积在碳管的外表面,明显减小了电极的欧姆阻抗和电化学极化阻抗,提高了氧还原反应的电催化活性.活性炭电极除存在电化学阻抗外,还存在薄液膜扩散阻抗(Nernst扩散),石墨电极形成的薄液膜反应区域较小,电极反应呈Warburg扩散阻抗特征,相应的电催化活性较低.采用交流阻抗等效电路分析方法,对拟合的动力学数据进行了解释.     

Effect of tip functionalization on transport through vertically oriented carbon nanotube membranes

Ionic flux through a composite membrane structure, containing vertically aligned carbon nanotubes crossing a polystyrene matrix film, was studied as a function of chemical end groups at the entrance to carbon nanotubes' (CNTs) cores. Plasma oxidation during the membrane fabrication process introduced carboxylic acid groups on the CNTs' tips that were modified using carbodiimide mediated coupling between the carboxylic acid and an accessible amine groups of the functional molecule. Functionalization molecules included straight chain alkanes, anionically charged dye molecules, and an aliphatic amine elongated by polypeptide spacers. Functionalization was confirmed by FTIR spectroscopy, and areal functional density was estimated by transmission electron microscopy studies of thiol terminated sites decorated by nanocrystalline gold. The transport through the membrane of two different sized but equally charged molecules (ruthenium bipyridine [Ru-(bipy)3(2+)] and methyl viologen [MV2+]) was quantified in a U-tube permeation cell by UV-vis spectroscopy. Relative selectivity of the permeates varied from 1.7 to 3.6 as a function of tip-functionalization chemistry. Anionic charged functional groups sharply increased the flux of the cationic permeates. This effect was reduced at higher solution ionic strength consistent with shorter Debye screening length. The observed selectivities were consistent with a hindered diffusion model with functionalization at the CNT tip and not along the length of the CNT core.     

Oxygen reduction reaction catalysts prepared from acetonitrile pyrolysis over alumina-supported metal particles

Noble-metal-free active catalysts for the oxygen reduction reaction (ORR) in an acidic environment were prepared from the pyrolysis of acetonitrile at 900 degrees C over alumina and metal-doped alumina. This work includes analyses of the nitrogen-doped carbon preparation process, characterization of the carbon materials formed, and activity testing for the ORR. The nitrogen-containing carbon nanostructures that formed during the pyrolysis of acetonitrile could be purified by washing the product with hydrofluoric acid. A wide range of techniques were used to characterize the solid carbon products of the acetonitrile decomposition. While the samples have many similar physical properties, X-ray photoelectron spectroscopy and transmission electron microscopy showed evidence that differences in the nanostructure and surface functional groups of the samples are likely to account for observed differences in oxygen reduction activity. The most active catalysts were prepared over alumina impregnated with up to 2 wt % Fe, although the catalysts that were prepared by acetonitrile pyrolysis over alumina with no metal doping still had significant activity. In comparison to a 20 wt % platinum on Vulcan carbon catalyst, the most active samples only have an additional 100 mV overpotential. The selectivity of the catalysts for complete oxygen reduction to water followed a trend similar to activity. The best selectivity to water versus peroxide obtained was 99%, or equivalently, an n of 3.98 (i.e., 3.98 electrons transferred out of a maximum of 4 electrons per mole of oxygen that is reduced), as determined by rotating ring-disk electrode testing.     

Effect of activated graphite nanofibers on electrochemical activities of Pt–Ru nanoparticles for fuel cells

In this work, graphite nanofibers (GNFs) were chemically activated for high specific surface area, small pore diameter, and high oxygen-containing groups with different KOH/GNFs ratios and used as carbon supports of Pt–Ru nanoparticles for fuel cells. As a result, the oxygen functional groups and specific surface area of carbon supports were increased with increasing the ratios of KOH/GNFs up to 4:1, while the average of Pt–Ru nanoparticle size was decreased owing to the improvement of dispersibility of the Pt–Ru/K–GNFs catalysts. The electrochemical activity of the Pt–Ru/K–GNFs catalysts was improved by the larger available active surface area due to the increase of oxygen functional groups and specific surface area. Therefore, it was found that chemical activation using KOH could influence the surface characteristic of carbon supports, resulting in enhanced electrochemical activity of the Pt–Ru/K–GNFs catalysts of fuel cells.     

Enhanced electrocatalytic performance of functionalized carbon nanotube electrodes for oxygen reduction in proton exchange membrane fuel cells

Although nitrogen doped CNTs (N-CNTs) are considered as a promising alternative to platinized carbon for the oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cells (PEMFCs), the origin of the enhanced ORR activity with N-CNTs is not clear at present. Among several plausible reasons, the exposure of edge plane and creation of impurity band/surface states near the Fermi level are considered as major causes behind the catalytic activity. However, CNTs without nitrogen doping are not known to catalyze the ORR. In this work, we study the ORR activity of functionalized carbon nanotubes with different functional groups, such as sulfonic acid and phosphonic acid, in order to understand the role of surface functionalities in catalyzing the reaction. Functionalized CNTs show significantly enhanced activity towards the ORR, while CNTs without such surface functional groups do not reveal any such special ORR activity. Linear sweep voltammetry experiments with different rotation rates show diffusion controlled limiting current values for functionalized CNTs, and the 'n' values derived from Koutecky-Levich plots are 3.3 and 1.7 for S-MWCNTs and P-MWCNTs, respectively. This work demonstrates the ORR activity of functionalized MWCNTs, which opens up new strategies for electrocatalyst design in PEMFCs.     

锂离子电池负极碳材料的表面改性与修饰Ⅰ．表面的氧化、还原处理对碳材料电极性能的影响

通过各种氧化／还原体系对碳材料进行表面氧化、还原处理,研究了碳材料表面的痕量有机含氧官能团对以碳材料作为锂离子电池负极的电池性能的影响．结果表明,碳材料表面大量有机含氧官能团的存在将引起电池性能的严重恶化;相应地如对电极表面进行一定的还原处理、以减少碳表面有机官能团的含量及其氧化程度则可提高电极（碳材料）的容量及首次循环效率．文中还结合碳材料表面有机官能团对电解液溶剂的分解反应以及碳电极表面钝化膜形成的影响进行了解释．     

Pd/MWCNTs贫燃甲烷催化燃烧性能研究

以MWCNTs为载体,用HNO_3做氧化剂对MWCNTs进行处理,通过XPS研究了处理前后MWCNTs表面官能团的变化,并采用超声浸渍法制得Pd/MWCNTs催化剂,借助TEM,揭示了Pd粒子在催化剂表面分散度和粒径与MWCNTs表面含氧量、羟基和羰基间的关系。并考察了Pd/MWCNTs催化剂预处理方法对低浓甲烷催化燃烧活性和稳定性的影响,研究表明,Pd的价态以及Pd粒子的粒径,都与催化剂的甲烷燃烧活性直接关联。单质Pd的氧化和Pd粒径的长大是导致催化剂性能衰减的原因。通过原位FT-IR技术对反应气氛下中间物种的监测,提出了Pd/MWCNTs催化剂上的低浓度甲烷催化氧化反应机理。     

纳米碳纤维的表面性质和微结构对氧还原催化活性的影响

采用超声处理的方法分别对管式纳米碳纤维(t-CNF)和鱼骨式纳米碳纤维(f-CNF)进行了表面化学处理. XPS结果表明, 在混酸(浓硫酸+浓硝酸)和氨水中进行超声化学处理可以在CNF表面分别引入含氧官能团和含氮官能团. 电化学测试结果表明, 2种不同微结构CNF的氧还原催化活性都遵循相同的趋势, 即CNF-P相似文献   

活性炭纤维的预处理及其SCR催化活性研究

随着中国能源工业的继续发展,氮氧化物排放相应政策法规的制定,烟气脱硝已经成为污染控制的重要组成部分.     

纳米碳管表面羧基化及其电还原性能

应用红外吸收光谱、扫描电子显微镜分别对纳米碳管和硝化后的纳米碳管进行表征,将其制备成粉末微电极,并在碱性溶液中测试它对对硝基苯酚的电还原性能.实验表明:经硝化处理后,碳管表面修饰了羰基,其电还原性能明显提高.依据实验结果探讨了硝化后纳米碳管于对硝基苯酚电还原过程中的反应机理.     

Adsorption of ammonia and water on functionalized edge-rich carbon nanofibers

The preparation, characterization and ammonia and water adsorption properties of edge-rich carbon nanofibers (CNFs) were studied, including platelet CNFs (PCNFs) and cup-stacked CNFs (CSCNFs). Since PCNFs and CSCNFs have many chemically active exposed edges, functionalization by oxidizing the edges was carried out by ozone stream and by nitric acid. Transmission electron microscopy, N₂ adsorption isotherms and temperature-programmed desorption analysis showed that the nitric acid treatment partly destroyed the graphite structure of the PCNFs and created acid functional groups and micropores, whereas the ozone treatment created functional groups without damaging the structure. Ammonia adsorption isotherms clarified that NH₃ adsorption on PCNFs and CSCNFs occurred mainly on oxygen-containing groups, whereas the adsorption on activated carbon fibers (ACFs) occurred on both oxygen-containing groups and the carbon surface without the functional groups, and the CSCNFs showed larger amounts of adsorbed ammonia compared to the PCNFs. Especially at a relatively low pressure range (<0.2 atm), the PCNFs/CSCNFs/ACFs showed the same ammonia adsorption mechanism; that is, the one-to-one interaction between oxygen atoms in the functional groups and hydrogen atoms in ammonia molecules. In addition, the adsorption on the ACFs appeared to occur mainly by interaction with the carbon surface at relatively high pressure (0.3–1.0 atm). Our experimental results and previous findings suggest that NH₃ adsorption on PCNFs is due mainly to NH…O hydrogen bonding between oxygen-containing groups and ammonia rather than to chemical bonding.     

碱性燃料电池Co-N/C复合催化剂的电化学性能

碳黑经过酸处理后再加入醋酸钴经氨气900 ℃热处理后, 以其制备的气体扩散电极在6 mol•L^―1 KOH溶液中对氧还原反应(ORR)的电催化性能得到大大提高. XRD物相分析表明: 碳粉中加入醋酸钴经氨气热处理生成了氮化钴(Co_5.47N). 通过极化曲线和交流阻抗方法对制备的气体扩散电极在空气中的性能进行了研究. 室温时在－0.2 V (vs. Hg/HgO)电位下, 未经处理的碳电极对氧还原基本没有电流产生; 用酸处理后的碳电极在空气中的电流密度提高到57 mA•cm^―2; 而Co-N/C复合电极在同样条件下电流密度可达170 mA•cm^―2, 交流阻抗显示氮化物的生成减小了氧还原反应的阻抗, 增强了对氧还原反应的电催化作用.     

Carbon paste electrode modified with copper(II) phosphate immobilized in a polyester resin for voltammetric determination of <Emphasis Type="SmallCaps"> l </Emphasis>-ascorbic acid in pharmaceutical formulations

A carbon paste electrode modified with copper(II) phosphate immobilized in a polyester resin (CuP-Poly) is proposed for voltammetric determination of L-ascorbic acid in pharmaceutical formulations. The modified electrode allows the detection of L-ascorbic acid at lower anodic potentials than observed at unmodified electrodes. Several parameters that can influence the voltammetric response of the proposed electrode such as carbon paste composition, pH, scan rate, and possible interference were investigated. The peak current was proportional to the concentration of ascorbic acid in the range 2.0 x 10(-5) to 3.2 x 10(-3) mol L(-1) with a detection limit of 1.0 x 10(-5) mol L(-1). The stability and repeatability of the electrode for the determination of L-ascorbic acid are also discussed. Amperometric response was also recorded for electrocatalytic oxidation of the L-ascorbic acid. Concentrations of the vitamin C in pharmaceutical formulations (tablets) measured using the modified electrode and a titrimetric method are in agreement at the 95% confidence level and within an acceptable range of error.