用于苯催化燃烧的Cu-Mn-O/Ce/γ-Al_2O_3-TiO_2催化剂

采用不同的浸渍法制备了负载型催化剂Cu-Mn-O/Ce/γ-Al2O3-TiO2,应用X射线粉末衍射(XRD)、低温液氮吸附(BET)、H2程序升温还原(H2-TPR)和X射线光电子能谱(XPS)等测试技术对催化剂进行了表征。在200～500℃考察了催化剂催化燃烧较高浓度的苯(体积分数为3.6%)反应中的催化性能。结果表明,15%CuMn2Ox/Al2O3-TiO2催化剂(CuMn2Ox质量分数为15%)在300℃苯的转化率达到79%,其低温催化活性明显高于单独负载氧化铜或氧化锰的催化剂。而采用共浸渍法制备的催化剂15%CuMn2Ox-15%CeO2/Al2O3-TiO2在300℃苯的转化率达81%,其催化活性明显高于分步浸渍法制备的催化剂。CeO2的添加更利于提高共浸渍法制备的催化剂中各活性组分的分散度和相互作用。     

Catalytic performance of iron oxide loaded on electron-rich surfaces of carbon nitride

Carbon nitride(CN) in CN encapsulated Ni/Al_2O_3(denoted as CN/Ni/Al_2O_3) catalyst was evidenced previously as a material in electron-rich state and possessed H2-dissociative adsorption activity due to the electron doping effect from underlying nickel. In this report, iron oxide loaded on the CN/Ni/Al_2O_3 was synthesized and investigated by Fischer-Tropsch(F-T) synthesis to test the special effect of electron-rich support on the catalytic activity of iron oxide. The Fe/CN/Al_2O_3 and CN/Ni/Al_2O_3 samples were accordingly synthesized for comparison. In Fe/CN/Ni/Al_2O_3, the iron oxide was reduced to magnetite by syngas as evidenced by the in-situ XPS measurements and XRD pattern of used catalyst. Compared with Fe/CN/Al_2O_3, more light hydrocarbons over Fe/CN/Ni/Al_2O_3 were observed. It should be understood by the interaction between iron oxide and support mainly due to the effect of electron-rich state and thus enhanced H_2 adsorption ability. In addition, such a novel support facilitated the CO conversion and retarded the water-gas shift reaction and CO2 formation. The new type of adjustment on electronic state should be useful for novel catalyst design.     

混合硝酸镍和醋酸镍制备的催化剂的特征和催化加氢抗硫性能

使用直接还原镍盐前体[Ni(NO_3)_2/γ-Al_2O_3, NiAc_2/γ-Al_2O_3或Ni (NO_3)_2-NiAc_2/γ-Al_2O_3]和镍氧化物前体的方法制备催化剂,研究了它们的 表面特征和甲苯加氢抗硫性能。还原镍盐得到的催化剂比还原其焙烧成的氧化物制 得的催化剂金属的还原和分散程度高。Ni(NO_3)_2-NiAc_2/γ-Al_2O_3分解得到的 氧化物前体的TPR在约415 ℃出现了较小数量的块状NiO的还原峰;而Ni(NO_3)_2- NiAc_2/γ-Al_2O_3的TPR中镍盐分解成氧化物时的耗氢量变小。用氢溢流的概念和 镍盐分解时的耗氢量可以将TPR的结果和金属的分散性关联起来。在镍盐前体催化 剂上甲苯的加氢具有较高的活性,而两种盐摩尔比为1：1时,盐前体催化剂反应活 性出现了一极大值,同时盐和氧化物前体催化剂都给出了抗硫性能的极大值。     

负载型纳米ZrO_2/Al_2O_3复合载体的制备和表征及其Ni/ZrO_2/Al_2O_3催化性能的研究

以大孔Al2O3为基载体,采用沉积-沉淀法和溶胶-沉积法制备了负载型纳米ZrO2/Al2O3复合载体.用XRD、TEM和比表面与孔径测定等手段对载体进行了表征.结果表明,负载型纳米ZrO2/Al2O3复合载体具有较大的比表面积和适宜的孔径分布,纳米ZrO2在载体上呈单层均匀分布.以CH4-CO2重整制合成气为探针反应,考察了Ni/ZrO2/Al2O3催化剂的活性和选择性.     

负载型钌催化剂催化山梨醇氢解制乙二醇(英)

Supported Ru catalysts were prepared by wet impregnation to evaluate the role of different oxide supports(Al_2O_3,SiO_2,TiO_2,ZrO_2) in sorbitol hydrogenolysis to glycols.X-ray diffraction,transmission electron microscopy,hydrogen chemisorption,X-ray photoelectron spectroscopy,and NH3temperature-programmed desorption were used to characterize the catalysts,which were active in the hydrogenolysis of sorbitol.The support affected both the physicochemical properties and catalytic behavior of the supported Ru particles.The characterization results revealed that the Ru/Al_2O_3catalyst has a high surface acidity,partially oxidized Ru species on the surface,and a higher surface Ru/Al atomic ratio,which gave it the highest selectivity and yield to glycols.     

Reductive amination of 1,6-hexanediol with Ru/Al_2O_3 catalyst in supercritical ammonia

Hexamethylenediamine(HMDA) is an important reagent for the synthesis of Nylon-6,6, and it is usually produced by the hydrogenation of adiponitrile using a toxic reagent of hydrocyanic acid. Herein, we developed an environmental friendly route to produce HMDA via catalytic reductive amination of 1,6-hexanediol(HDO) in the presence of hydrogen. The activities of several heterogeneous metal catalysts such as supported Ni, Co, Ru, Pt, Pd catalysts were screened for the present reaction in supercritical ammonia without any additives. Among the catalysts examined, Ru/Al_2O_3 presented a high catalytic activity and highest selectivity for the desired product of HMDA. The high performance of Ru/Al_2O_3 was discussed based on the Ru dispersion and the surface properties like the acid-basicity. In addition, the reaction parameters such as reaction temperature,time, H_2 and NH_3 pressure were examined, and the reaction processes were discussed in detail.     

Steam reforming of acetic acid over Ni-Ba/Al_2O_3 catalysts:Impacts of barium addition on coking behaviors and formation of reaction intermediates

The influence of barium addition to a Ni/Al_2O_3 catalyst on the reaction intermediates formed,the activity,resistance of the catalyst to coking,and properties of the coke formed after acetic acid steam reforming were investigated in this study.The results showed the drastic effects of barium addition on the physicochemical properties and performances of the catalyst.The solid-phase reaction between alumina and BaO formed BaAl_2O_4,which re-constructed the alumina structure,resulting in a decrease in the specific surface area and an increase in the resistance of metallic Ni to sintering.The addition of barium was also beneficial for enhancing the catalytic activity,resulting from the changed catalytic reaction network.The in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) study of the acetic acid steam reforming indicated that barium could effectively suppress the accumulation of the reaction intermediates of carbonyl,formate,and C=C functional groups on the catalyst surface,attributed to its relatively high ability to cause the gasification of these species.In addition,coking was considerably more significant over the Ba-Ni/Al_2O_3 catalyst.Moreover,the Ba-Ni/Al_2O_3 catalyst was more stable than the Ni/Al_2O_3catalyst,owing to the distinct forms of coke formed (carbon nanotube form over the Ba-Ni/Al_2O_3 catalyst,and the amorphous form over the Ni/Al_2O_3 catalyst).     

聚苯乙烯的催化裂解研究

由于塑料性质稳定,难以自然降解,其废弃物不仅严重污染环境,更造成了资源浪费.因此,废旧塑料的再资源化对环境保护和可持续发展有着重要意义.废塑料再资源化回收技术是指将废塑料热裂解或催化裂解、回收燃料油和化工原料的技术~([1,2]).     

Characterization of Ni／AlMCM-41 Catalysts and Their Catalytic Performance in n-Dodecane Hydroconversion

A series of Ni/AIMCM-41 catalysts with different nickel contents was prepared via the incipient wetness impregnation method. The effects of the nickel content on the structure, acidity and metal function of the catalysts were studied by using different techniques. In the test of n-dodecane hydroconversion, it was found that the metal and acid functions were well balanced over a 2.0%Ni (mass fraction)/AIMCM-41 catalyst, which gave the maximal isomerization selectivity and a homolytic cleavage products.     

Ce1-xNixO2/Al2O3/FeCrAl催化剂的制备及其甲烷催化燃烧性能

以FeCrA l合金薄片为基体,A l2O3为过渡载体,Ce1-xN ixO2(x=0.1-0.3)、CeO2和N iO为活性组分,制备了Ce1-xN ixO2/A l2O3/FeCrA l、CeO2/A l2O3/FeCrA l和N iO/A l2O3/FeCrA l金属基整体式催化剂,在固定床微型反应器中评价了催化剂的甲烷催化燃烧性能,用SEM、XRD、TPR等方法对催化剂的物相、表面形貌和氧化还原性进行了表征.结果表明,Ce1-xN ixO2在催化剂表面的分散性比CeO2和N iO要好;Ce1-xN ixO2/A l2O3/FeCrA l(x=0.1-0.3)催化剂具有好的催化活性和高温稳定性,CeO2/A l2O3/FeCrA l和N iO/A l2O3/FeCrA l催化剂有好的初活性但高温稳定性较差;活性组分与A l2O3和FeCrA l金属基体之间存在较强的相互作用.     

A Novel Way to Prepareγ-A1_2O_3 Supported SO_4~(2-)/ZrO_2 Solid Superacid Catalysts for n-Butane Isomerization

The isomerization of n-butane to isobutane, which is a valuable precursor for theproduction of MTBE and alkylated gasoline, on strong acid catalysts is an importantprocess in refining industry. Solid superacid, especially sulfated zirconia, has highcatalytic activity in n-butane isomerization at comparatively low temperatures andtherefore has attracted more attention of researchers in the past twenty years.' However,from the view point of practice, the activity of SZ needs to be improved fur…     

SO2-4/ZrO2-Al2O3及载Pt催化剂上正丁烷异构化反应

研究了ＳＯ４＾２－／ＺrＯ２－Ａl２Ｏ３固体超强酸催化剂与制备条件的关系,探讨了催化剂表面结构及晶化程度,并在Ｎ２活化条件下用脉冲色谱法考察了催化剂催化正丁烷异构化反庆活性。结果表明,添加Ａ１可提高催化剂的催化剂的催化活性,降低反应温度,载铂对提高催化剂的活性和稳定性更为有效。     

单层分散型Pt/Ni双金属催化剂的制备及其C=C和C=O催化加氢性能

 利用金属置换反应制备了表面单层分散型Pt/Ni双金属催化剂,并测定了该催化剂对环己烯、苯乙烯、丙酮和丁醛气相加氢反应的催化性能. 结果发现,这种催化剂具有比传统浸渍法制备的相同Pt含量的Pt/Ni和Pt/Al2O3催化剂更高的催化活性.     

硫物种对负载型钯催化剂上氢吸附性质的影响

用X光光电子能谱(XPS)分析了负载型Pd/Al_2O_3催化剂上硫和钯的状态。以程序升温脱附-质谱(TPD-MS)方法研究了不同硫物种及不同气氛对催化剂氢吸附性质的影响。结果表明: 硫物种对氢吸附的影响按S_2~(2-)、S~(2-)、SO_4~(2-)的顺序减小, 且前两者的影响远比SO_4~(2-)的大。这与催化剂在H_2-O_2反应中的抗硫性评价结果一致。并用原子分子轨道理论对上述结果进行了讨论。     

一种TiO2修饰的Pd/Al2O3选择性加氢用催化剂的研究

 研制了一种用TiO2修饰的Pd/Al2O3(Pd/Al2O3-TiO2)选择性加氢催化剂,并采用N2吸附,XRD,SEM,FT-IR,TPD和TPR等手段对催化剂进行了表征,考察了催化剂的催化性能. 结果表明,Pd/Al2O3-TiO2催化剂具有较小的比表面积; 低的表面酸性,且以弱酸中心为主; TiO2在Al2O3表面呈高度分散,并集中于载体到一定的深度; 用含钛溶液浸渍次数以1次为佳. 载体中TiO2的添加使得PdO更易于被还原. 用这种复合氧化物作载体制备的催化剂表现出更高的加氢活性和选择性,优于单纯以Al2O3作载体的催化剂.     

氧化铝担载的贵金属铱基催化剂的制备及其对甲醇裂解反应的催化性能

 以ZrO2, La2O3或MgO为助剂制备了氧化铝担载型铱基催化剂,考察了其对甲醇裂解反应的催化性能,并用X射线光电子能谱、程序升温还原、 H2程序升温脱附和CO程序升温脱附等技术对催化剂进行了表征. 结果表明, ZrO2, La2O3和MgO助剂的引入均能提高主产物氢气和CO的选择性. ZrO2是甲醇裂解反应的优良助剂,可以显著提高甲醇的转化率和氢气的收率. 氧化铝担载型贵金属铱基催化剂上存在强的氢溢流现象,这使催化剂具有良好的反应性能,同时有利于产物的脱附,氧化物助剂的加入能够进一步促进氢的溢流.     

具有良好热稳定性的Al2O3改性Fe2O3基金催化剂

通过共沉淀法和沉积-沉淀法制备出了具有良好热稳定性的Al2O3改性Fe2O3基金催化剂, 并通过透射电镜(TEM)、X射线衍射(XRD)、N2吸附-脱附及热重和差示扫描量热(TG-DSC)分析等表征手段对催化剂的结构与表面形貌进行了研究分析. TEM测试结果表明: 500 ℃焙烧后, 未掺杂Al2O3的催化剂中金颗粒粒径分布较宽, 平均粒径约为7.0 nm, 载体颗粒尺寸在50-100 nm范围内; 而掺杂Al2O3的催化剂中金颗粒粒径分布变窄, 平均粒径约为5.0 nm, 且载体颗粒大小也明显小于未掺杂Al2O3的催化剂, 保持在30-50 nm的范围内. N2吸附-脱附测试结果表明, Al2O3的掺杂有利于保持催化剂的介孔结构和比表面积, 从而提高了载体的热稳定性. XRD和TG-DSC测试结果表明, Al2O3的掺杂可以有效地抑制Fe2O3的结晶, 进而抑制了高温焙烧过程中金颗粒的长大. 选用CO低温氧化反应对催化剂的活性进行了评价, 即使在500 ℃高温下焙烧12 h, 掺杂了Al2O3的催化剂仍然可在26.7 ℃将CO完全转化, 而未掺杂Al2O3的催化剂CO最低完全转化温度(T100)高达61.6 ℃. Al2O3的掺杂显著提高了催化剂的热稳定性能.     

低镍催化剂上CO和CO_2加氢反应的对比研究

采用ＣＯ和ＣＯ＿２对比加氢活性测试，ＸＲＤ及ＴＰＲ方法研究了两个不同Ｎａ助剂含量的低镍Ｎｉ／Ａｌ＿２Ｏ＿３体系的性能。实验发现，在低镍催化剂上ＣＯ＿２在较低温度下就可加氢生成甲烷，而ＣＯ则需要更高的温度，ＣＯ＿２无需先经逆变换生成ＣＯ，然后再加氢，它可直接加氢生成ＣＨ＿４。在同一催化剂上，ＣＯ＿２加氢生成ＣＨ＿４的表现活化能要低于ＣＯ加氢生成ＣＨ＿４反应的表现活化能。晶相ＮｉＯ还原后形成的活性相对ＣＯ＿２加氢反应的活性明显高于它对ＣＯ的加氢活性，非晶相镍氧化物还原后形成的活性相对ＣＯ的加氢反应特别有利。Ｎａ助剂的含量不同会造成Ｎｉ氧化物物种的分配不同，从而导致ＣＯ、ＣＯ＿２的加氢活性及其随温度的变化也不相同，催化剂对ＣＯ、ＣＯ＿２加氢反应作用的本质是不相同的。     

载体对Au-Pd双金属催化剂加氢脱硫性能的影响

研究了Al_2O_3,TiO_2-Al_2O_3等载体对Au-Pd双金属催化剂的噻吩加氢脱硫性能的影响,并运用XRD,TPD,BET,TPR等手段对Au-Pd双金属催化剂进行了表征.结果表明,Au-Pd/TiO_2-Al_2O_3催化剂有较好的噻吩加氢脱硫反应活性和稳定性,与Au-Pd/Al_2O_3催化剂相比,Au-Pd/TiO_2-Al_2O_3催化剂有较高的酸密度和酸强度、活性表面积、H_2及CO的吸附量.     

Co-Mo/Al2O3和Ru-Co-Mo/Al2O3催化剂的不同表面钴中心表征

利用IR、MS方法对还原态的Co-Mo/Al_2O_3和Ru-Co-Mo/Al_2O_3催化剂进行了考察。结果表明, 还原态的Co-Mo/Al_2O_3和Ru-Co-Mo/Al_2O_3表面上存在着不同的Co中心。可以十分明显地观察到, 在Co-Mo/Al_2O_3上, NO吸附的红外光谱显示了1895和1880 cm~(-1)谱带; 在TPD-MS图上显示了353, 423和473 K谱峰。通过比较Co-Mo/Al_2O_3和Ru-Co-Mo/Al_2O_3, 提出了在Ru-Co-Mo/Al_2O_3中Ru的加入主要是提高了NO在催化剂上的吸附速率和吸附量, 增强吸附键的强度。