Pt/Ce0.75Zr0.25O2的催化性能及其氧移动性的 18O 同位素交换表征

 采用浸渍法制备了Pt/Ce0.75Zr0.25O2催化剂,考察了催化剂对乙醇及CO的氧化活性,并采用 18O 同位素交换、乙醇程序升温表面反应(C2H5OH-TPSR)、一氧化碳程序升温脱附(CO-TPD)和程序升温还原(H2-TPR)等技术对催化剂进行了表征. 结果表明, Pt/Ce0.75Zr0.25O2催化剂表现出较高的乙醇和CO氧化活性,其催化活性随着Pt负载量的增加而提高. 当Pt负载量为3%时,活性最高. 继续增加Pt负载量,催化剂活性下降. C2H5OH-TPSR和CO-TPD结果表明,催化剂对乙醇或CO的氧化活性与从催化剂表面脱附出来的CO2量有对应关系, CO2脱附量越大,催化剂活性越高. 18O 同位素交换结果表明,表面氧交换能力与其氧化活性有一定对应关系,催化剂的表面氧交换能力越高,氧化活性越高.     

CeZrYLaO对Fe基整体式稀薄甲烷催化燃烧性能的影响

采用共沉淀法制备了高性能低铈储氧材料Ce_0.35Zr_0.55Y_0.07La_0.03O_1.95(OSM,储氧材料)和胶溶法制备了耐高温、高比表面的La-Al₂O₃并以它们为载体,制备了一系列整体式铁基催化剂。考察了该系列催化剂对甲烷稀薄燃烧的催化性能,并用低温N₂吸附-脱附,储氧能力(oxygen storage capacity,OSC),XRD,XPS和H₂-TPR等测试手段对载体和催化剂进行了表征。活性测试结果表明所制得的整体式催化剂Fe/OSM+La-Al₂O₃可在50 000 h^-1的高空速条件下使含量为1%的甲烷在474 ℃起燃,565 ℃完全转化;低温氮吸附-脱附测试结果表明,所制得的Ce_0.35Zr_0.55Y_0.07La_0.03O_1.95经1 050 ℃焙烧5 h后的BET比表面积达33 m²·g^-1,孔容为0.14 mL·g^-1;La-Al₂O₃经1 050 ℃焙烧5 h后的BET比表面积达125 m²·g^-1,孔容为0.46 mL·g^-1,是优良的催化剂载体;OSC测试结果表明,加入储氧材料(oxygen storage material(OSM))能增加催化剂的储氧性能,有利于催化活性的提高;XRD测试结果表明,OSM以均一固溶体存在;XPS测试结果表明,Fe₂O₃与OSM载体之间的相互作用最强;H₂-TPR测试结果表明,加入OSM能增加催化剂的还原性能,从而提高了催化活性。     

临氢还原处理对Al2O3负载的CuO-MOx催化剂的影响

研究了Ｈ２预处理对Ａｌ２Ｏ３负载ＣｕＯ和ＣｕＯ－ＭＯｘ催化剂的作用。考察了Ｈ２处理时间、Ｈ２处理浓度以及多次还原氧化循环对ＣｕＯ系催化剂ＣＯ氧化活性的影响规律,并用原位还原氧化反应技术、ＸＰＳ对Ｈ２预处理的作用进行了研究。结果表明,ＣｕＯ－ＣｏＯ／Ａｌ２Ｏ３和ＣｕＯ－Ｃｅ２Ｏ３／Ａｌ２Ｏ３催化剂受Ｈ２还原处理后ＣＯ氧化活性明显增加,并随Ｈ２处理时间、处理浓度的增加而增强。而且催化剂的ＣＯ氧化活性还     

Ni/MgO-Al2O3催化剂上高温焦油组分的催化转化

采用分步浸渍法制备了MgO-Al2O3负载的Ni基催化剂, 并运用N2吸附、载射线衍射(XRD)、透射电子显微镜(TEM)等手段进行表征. 该催化剂用于甲苯或萘为焦油模拟化合物的高温焦炉煤气(COG)的常压加氢裂解反应, 并考察了H2浓度、H2S对催化剂活性的影响. 结果表明: 催化剂还原后, 表面形成均匀分散、直径为8-14 nm的金属Ni纳米颗粒; 在较低的水碳摩尔比(nH2O/nC=0.28)时, 甲苯就能完全转化并选择性地加氢裂解形成CH4, 测试的时间内(480 min), 催化剂没有明显的失活和积炭现象, 显示出好的反应活性、稳定性和耐硫能力. 制得的Ni/MgO-Al2O3催化剂有望应用于较低水含量(10%-15%(φ, 体积分数))的高温焦炉煤气中焦油的直接转化.     

Ni/La_2O_3/Al_2O_3催化剂上甲烷干重整积炭表征与分析(英文)

用传统的等体积浸渍法或蒸发法制备了Ni/La_2O_3/γ-Al_2O_3与Ni/La_2O_3/α-Al_2O_3催化剂,在没有稀释气体的条件下进行了甲烷干重整反应.采用H_2程序升温还原、N_2吸附脱附、X射线衍射、透射电子显微镜、热重-差示扫描热量以及程序升温加氢等手段对新鲜的与反应后的催化剂以及沉积的碳进行了表征.结果表明,催化剂上有四种含碳物种,以三种形态存在,即无定形碳(聚合态)、丝状碳或石墨碳.这些催化剂上积炭的数量与种类各不相同,依赖于催化剂中金属Ni颗粒的大小与载体的织构特性.丝状碳的形成及其形貌与金属Ni颗粒的大小有着密切的联系.Ni颗粒小于15nm时能抑制丝状碳的形成与沉积.减少积炭的数量,同时能产生较多的活性C_a物种,从而在一定程度上导致催化剂具有较好的活性与稳定性.     

Cerium-modified Ni-La_2O_3/ZrO_2 for CO_2 methanation

The key point in CO_2 methanation is to improve the activity at low temperature and the stability.For this purpose,a new cerium-modified Ni-La_2O_3/ZrO_2 catalyst was prepared using La_(1-x)Ce_xNiO_3/ZrO_2 with perovskite phase as the precursor,which was obtained by citrate complexation combined with an impregnation method.The resulting catalyst was characterized through Nitrogen adsorption and desorption,X-ray diffraction (XRD),Transmission electron microscopy (TEM),Hydrogen temperature programmed reduction (H_2-)TPR),Temperature-programmed desorption of CO_2 (CO_2-TPD) and that of H_2 (H_2-TPD),and X-ray photoelectron spectroscopy (XPS) techniques,and the catalytic performances for CO_2 methanation was investigated.Cerium modification could improve the effective activation of CO_2,thus enhancing the activity at low temperature for CO_2 methanation.The metal Ni nanoparticles prepared using this method were highly dispersed and showed excellent resistance to sintering,leading to very good stability,which could be attributed to the following:Ni nanoparticles could be confined by cerium-modified La_2O_3;La_2O_3could be confined by the cerium ions at the La_2O_3/ZrO_2 interface;and the cerium ions were confined by ZrO_2.     

Methane reforming With CO2 to syngas over CeO2-promoted Ni/Al2O3-ZrO2 catalysts Prepared Via a direct sol-gel process

CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy (IR), thermal gravimetric analysis (TGA), microscopic analysis, X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.     

CO2重整甲烷反应高效稳定Ni/ZrO2催化剂的纳米结构特点

分别通过在常压流动N2气中加热处理ZrO(OH)2醇凝胶和在空气中焙烧ZrO(OH)2水凝胶制备了含不同晶相组成和不同尺寸ZrO2纳米粒子的Ni/ZrO2催化剂.Ni/ZrO2催化剂上CO2重整CH4反应的活性和稳定性以及多种催化剂表征(XRD,TEM,TPR及TPD等)数据表明,高效稳定的Ni/ZrO2催化剂必须具有“金属/氧化物”纳米复合物的特征.ZrO2纳米粒子的晶相组成对CO2重整甲烷反应中纳米复合物型Ni/ZrO2催化剂的稳定性没有明显影响.     

Ce0.63Zr0.37MnxO2复合氧化物在CH4选择性催化还原NO反应中的研究

以Ce0.63Zr0.37MnxO2复合氧化物(OSM)为载体,Pt为活性组分,制备Pt质量百分含量为1%的催化剂。考察了OSM中Mn含量对CH4催化还原NO反应的性能,并利用XRD和H2-TPR对催化剂进行了表征。结果表明Pt/OSM催化剂在有氧条件下对CH4催化还原NO具有较好的催化活性,Mn含量为10%和15%的OSM制备的催化剂活性最好。XRD结果表明,Ce0.63Zr0.37MnxO2复合氧化物以固熔体形式存在,且Pt高度分散于载体上。H2-TPR结果表明,Pt/OSM2和Pt/OSM3催化剂具有较强的可还原性能,而Pt/OSM1和Pt/OSM4催化剂的可还原性能较弱。     

Pt，Pd助剂对Ni基催化剂中Ni的分散度及抗积碳性能的影响

研究了添加少量贵金属(Pt,Pd)的Ni/Al2O3催化剂对甲烷水蒸汽重整反应抗积碳能力和催化性能的影响.催化活性实验表明,添加少量Pt的样品显著提高了Ni/Al2O3催化剂的活性,稳定性,抗积碳和抗氧化能力,而添加Pd的样品对Ni/Al2O3催化剂的催化性能提高并不明显.利用氢气程序升温还原(H2-TPR),X射线晶体衍射(XRD),热重-差热分析(TG-DTA)等手段对反应前后的催化剂进行了表征,研究发现在Ni-Pt/Al2O3催化剂中Ni与Pt之间存在较强的相互作用力,在主要由Ni覆盖的表面形成了Ni-Pt双金属簇,提高了Ni的分散度,在催化剂的表面易于形成较小的Ni颗粒,抑制了Ni的烧结,改善了Ni基催化剂的抗积碳能力;贵金属Pt通过H2的溢流效应促进了Ni的还原,抑制了催化剂的氧化.而在Ni-Pd/Al2O3中,Ni和Pd存在着一定的偏析效应,不能有效的形成Ni-Pd双金属簇,在还原过程中分别被还原.     

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

Aseries of Ni catalysts supported on alumina with different Ce contents(1.0%-6.0%, mass fraction) was prepared by the impregnation method and used for dry reforming of methane(DRM) at a relatively low temperature of 650 ^oC. The promotion effect of Ce with different loading amounts on the physicochemical properties of the catalysts was systematically characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD), N₂ adsorption-desorption, thermo elemental IRIS Intrepid inductively coupled plasma atomic emission spectrometer (ICP-AES), UV-visible diffuse reflectance spectroscopy(UV-Vis DRS), Fourier transformation infrared(FTIR) spectra, H₂-temperature programmed reduction(H₂-TPR) analysis, H₂-temperature programmed desorption(H₂-TPD), and the X-ray photoelectron spectroscopy(XPS) techniques. The results indicate that all the catalysts mainly exist in the NiAl₂O₄ phase after being calcined at 750 ^oC with small Ni particle sizes due to the strong metal-support interaction derived from the reduction of the NiAl₂O₄ phase. The Ce-promoted catalysts show better catalytic performance as well as the resistance against sintering of Ni particles and deposition of carbon compared to the Ni/Al₂O₃ catalyst. The Ni-6Ce/Al₂O₃ exhibits the best catalytic stability and coke resistance among the four catalysts studied, which is due to its small Ni nanoparticles sizes, excellent reducibility as well as high amount of active oxygen species. In a 400 h stability test for DRM reaction at 650 ^oC, Ni-6Ce/Al₂O₃ exhibits less coke deposition and small growth of Ni nanoparticles. This work provides a simple way to preparing the Ni-Ce/Al₂O₃ catalyst with enhanced catalytic performance in DRM. The Ni-6Ce/Al₂O₃ catalyst has great potential for industrial application due to its anti-sintering ability and resistance to carbon deposition.     

潮湿空气中YBa_2Cu_3O_(7-x)超导体表面分解的SIMS研究

本实验利用SIMS研究了YBa_2Cu_3O_(7-X)超导体长期暴露在潮湿空气中的表面分解问题。结果表明,YBC超导体与湿空气中H_2O和CO_2发生化学反应,则使表层分解成BaCO_3、Y_2O_3和CuO等物质。     

同轴静电纺丝技术制备Y_2O_3:Eu~(3+)@SiO_2豆角状纳米电缆与表征

采用同轴静电纺丝技术,以氧化钇、氧化铕、正硅酸乙酯(C8H20O4Si)、无水乙醇、PVP和DMF为原料,成功制备出大量的Y2O3:Eu3+@SiO2豆角状纳米电缆.用TG-DTA,XRD,SEM,TEM和荧光光谱等分析技术对样品进行了系统地表征.结果表明,得到的产物为Y2O3:Eu3+@SiO2豆角状纳米电缆,以无定型SiO2为壳层,晶态Y2O3:Eu3+球为芯,电缆直径约为200nm,内部球平均直径约150nm,壳层厚度约为25nm,电缆长度300μm.纳米电缆内部为球状结构,沿着纤维长度方向有序排列,形貌均一.Y2O3:Eu3+@SiO2豆角状纳米电缆在246nm紫外光激发下,发射出Eu3+离子特征的波长为614nm的明亮红光.对其形成机理进行了初步讨论.     

制备方法对Ni/MgO/Al2O3催化剂在甲烷与二氧化碳重整反应活性的影响

采用浸渍－还原法制备的Ｎｉ／ＭｇＯ／Ａｌ２Ｏ３在ＣＨ４与ＣＯ２重整制合成气反应中显示出良好的催化性能和一定的抗积炭能力;在１０２３Ｋ下流动反应气氛中连续运转１００ｈ,未见活性下降,ＣＨ４及Ｃ弦均为９０％左右,ＣＯ收率高于９０％,实验还发现,ＣＨ４转化率随着原料气中ＣＯ２浓度的增加而升高,当Ｖ（ＣＯ２）／Ｖ（ＣＨ４）＝２时ＣＨ４转化率可达１００％,通过ＢＥＴ比表面积测定及ＸＲＤ,ＴＥＭ等分析手段,比     

外掺Y2O3对镍氢电池正极高温性能的影响

研究了外掺Y2O3对镍氢电池镍正极高温性能的影响. 通常镍正极在高温下放电比容量会骤然降低, 为了提高其高温性能, 进行了球型Ni(OH)2外掺不同比例Y2O3的实验, 对压制的镍电极在不同温度下的充放电情况进行了细致的研究. 研究发现外掺Y2O3的球型Ni(OH)2电极比普通球型Ni(OH)2电极的放电比容量在高温下要高出很多, 在0.2 C充放电情况下外掺1%是最佳比例, 它比普通球型Ni(OH)2电极的放电比容量要高出35%以上, 在1 C充放电情况下外掺0.2%是最佳比例, 它比普通球型Ni(OH)2电极的放电比容量要高出15%以上. 同时对外掺Y2O3提高镍正极放电比容量的原因也进行了初步探讨.     

Catalytic performances of Ni/mesoporous SiO_2 catalysts for dry reforming of methane to hydrogen

Several mesoporous silicas with different morphologies were controllably prepared by sol-gel method with adjustable ratio of dual template,and they were further impregnated with aqueous solution of nickel nitrate,followed by calcination in air.The synthesized silica supports and supported nickel samples were characterized using N_2-adsorption/desorption,X-ray diffraction(XRD),H_2 temperature-programmed reduction(H_2-TPR),Scanning electron microscope(SEM),Transmission electron microscope(TEM) and thermo-gravimetric analysis(TGA-DTG) techniques.The Ni nanoparticles supported on shell-like silica are highly dispersed and yielded much narrower nickel particle-size than those on other mesoporous silica.The methane reforming with dioxide carbon reaction results showed that Ni nanoparticles supported on shell-like silica carrier exhibited the better catalytic performance and catalytic stability than those of nickel catalyst supported on other silica carrier.The thermo-gravimetric analysis on used nickel catalysts uncovered that catalyst deactivation depends on the type and nature of the coke deposited.The heterogeneous nature of the deposited coke was observed on nickel nanoparticles supported on spherical and peanut-like silica.Much narrower and lower TGA derivative peak was founded on Ni catalyst supported on the shell-like silica.     

Pt/Pr_6O_(11)催化巴豆醛选择性加氢性能研究

采用沉积一沉淀法制备了Pt/Pr_6O_(11)催化剂,应用于巴豆醛气相选择性加氢生成巴豆醇的反应.Pt/Pr_6O_(11)催化剂经700℃还原后,巴豆醇初始选择性可以达到75%以上.H_2-TPR和In situ FTIR结果表明,还原后的Pt/Pr_6O_(11)催化剂中存在低价态的Pr~(3+),在巴豆醛加氢过程中能够给Pt提供电子,增加活化C=0键的能力,从而提高生成巴豆醇的选择性.Raman光谱实验结果表明,反应过程中Pt/Pr_6O_(11)催化剂表面有积炭产生,而积炭是造成催化剂活性和选择性下降的主要原因.     

Effects of Ce/Zr ratio on the structure and performances of Co-Ce_(1-x)Zx_xO_2 catalysts for carbon dioxide reforming of methane

The Co-incorporated Ce_(1-x)Zr_xO_2 catalysts were prepared by co-precipitation for carbon dioxide reforming of methane. The ratio of Ce to Zr was varied to optimize the performances of co-precipitated Co-Ce-Zr-O_x catalysts. The prepared catalysts were characterized by various physico-chemical characterization techniques including TPR, X-ray diffraction, N2 adsorption at low temperature, XPS and CO_2-TPSR. The co-precipitated Co-Ce_(0.8)Zr_(0.2)O_2 sample containing 16% CoO exhibited a higher catalytic activity among the five catalysts, and the activity was maintained without significant loss during the reaction for 60 h. Under the conditions of 750 ℃, 0.1 MPa, 36000 ml/(h·g_(cat)), and CO_2/CH_4 molar ratio of 1 : 1, the CO_2 conversion over this catalyst was 75% while the CH_4 conversion was 67%. The cubic Ce_(0.8)Zr_(0.2)O_2 facilitated a higher dispersion and a higher reducibility of the cobalt component, and the apparent activation energy for Co-Ce_(0.8)Zr_(0.2)O_2 sample was 49.1 kJ/mol in the CO_2/CH_4 reforming reaction. As a result, the Co-Ce_(0.8)Zr_(0.2)O_2 sample exhibited a higher activity and stability for the reforming of CH_4 with CO_2.     

Integrated Ni_2P nanosheet arrays on three-dimensional Ni foam for highly efficient water reduction and oxidation

The large-scale synthesis of efficient nonprecious bifunctional electrocatalysts for overall water splitting is a great challenge for future renewable energy conversion systems. Herein, Ni_2P nanosheet arrays directly grown on three-dimensional(3 D) Ni foam(Ni P/NF) are fabricated by hydrothermal treatment of metallic Ni foam with H_2O_2 solution and subsequent phosphidation with NaH_2PO_2. The Ni P/NF as electrocatalyst exhibits superior activities for both hydrogen evolution reaction(HER) and oxygen evolution reaction(OER). Most importantly, employing both as the cathode and anode for an alkaline water electrolyzer, Ni P/NF only requires a cell voltage of 1.63 V to reach a current density of 10 mV cm~(-2), together with stronger durability. Preliminary catalytic information suggests that the tailored 3 D superstructure and integrated electrode configurations afford improved active sties and enhanced electron/mass transfer,responding for the outstanding activity and stability.     

La2O3对沼气重整制氢催化剂Ni/γ-Al2O3的影响

用浸渍法制备了不同La2O3含量的Ni/La2O3/γ-Al2O3催化剂, 用CH4/CO2体积比为1的混合气体模拟沼气, 考察了La2O3对沼气重整制氢催化剂Ni/γ-Al2O3的结构及催化性能的影响. 运用XRD、H2-TPR、BET及TEM等手段对催化剂进行了表征. 结果表明, La2O3对催化剂Ni/γ-Al2O3的影响主要取决于其含量. 载体中La2O3的添加增强了Ni与Al2O3之间的相互作用. 添加适量的La2O3能使催化剂具有更好的可还原性, 并能增加金属Ni的分散性, 抑制反应过程中Ni的烧结, 提高载体对CO2的吸附能力, 从而改善了催化剂的抗积炭性, 使催化剂具有较好的活性及稳定性. 反之, 过量La2O3的掺杂会使催化剂的抗积炭性及活性下降. 当La2O3含量为6%(w)时, 催化剂中Ni晶粒具有较好的分散性、还原性及抗积炭性, 从而使催化剂具有更好的活性及稳定性.