Influence of rubbing conditions of polyimide alignment layer on optical anisotropy of immobilized liquid crystal film

The relationship between the molecular orientation of a rubbed polyimide film (alignment layer) and that of mesogens in a photopolymerized liquid crystal (LC) coated on the film has been investigated using optical measurements. LC monomers were deposited on the alignment layer and were aligned in one direction. The LC monomers were subsequently photocured. Alignment layers under various rubbing conditions were prepared. It was found that the inclination angle of the refractive index ellipsoid and the optical retardation of photopolymerized LC films are strongly related to the optical anisotropy of the rubbed polyimide film. The photopolymerized LC film exhibited high optical anisotropy when alignment layers with an inclination angle of the refractive index ellipsoid smaller than 6° were used.     

Anisotropic reactive mesogens transfer onto polyimides-mixture layer via imprinting method for continuous pretilt angle control

We present a new approach for the alignment process to orient liquid crystal (LC) molecules. The process consists of fabrication of a stamp composed of reactive mesogens (RMs), transfer of RM from the stamp onto polyimide (PI) layers, and LC device fabrication using the resulting RM/PI layers. The RM stamp was made anisotropic by a rubbing treatment, and this anisotropy was transferred to the PI layers via contact imprinting, leading to an achievement of uniform LC alignment. In addition, the pretilt angle of the LC molecules could be controlled by varying the content of homogeneous PI in the PI layers. We describe the effects of high pretilt angle upon the electro-optical (EO) characteristics of twisted-nematic (TN) cells based on the RM transfer film/blended PI layers.     

Superior electro-optical performance in vertically aligned liquid crystal devices based on aluminum oxide films

We achieved vertically aligned (VA) liquid crystals (LCs) on aluminum oxide (Al₂O₃) films deposited via e-beam evaporation using a rubbing treatment. Uniform and vertical LC alignment was achieved and high thermal stability was obtained using these substrates. By analyzing measurements from optical retardations, we confirm that the LC orientation is adjustable using rubbing treatment. The superior electro-optical characteristics of the VA cells based on Al₂O₃ films are measured and compared with those based on polyimide layers, indicating that this approach will allow the fabrication of high-performance, advanced LC displays using a conventional rubbing process.     

Flow behaviours of liquid crystal droplets on polyimide alignment layers

The flow behaviours of liquid crystal droplets on polyimide alignment layers and during assembling between two substrates have been directly observed. The droplet shape became elliptical with time on the rubbed polyimide layer, where the major axis of the elliptical droplet was parallel to the rubbing direction. Rubbing enhanced the wettability between the liquid crystal and the polyimide layer. During the assembling process, the liquid crystal droplets elliptically splayed out between two substrates assembled antiparallel. The liquid crystal molecules preferentially flowed parallel to the rubbing direction in a two-step flow mode; the droplet diameter slowly increased at the first step, and then it rapidly increased at the second step. The two-step flow of the droplet proved to be due to the thickness of the droplet dependent on the rubbing strength.     

Surface morphology at nanometer level and optical phase retardation of rubbed alignment films

The surface morphology of rubbed polyimide LC aligning films has been studied by scanning force microscopy. We examined three types of alignment film: HT-210, AL-1051 (main chain type) and AL-8044 (side chain type) polyimide surfaces. The rubbed polyimide surfaces show anisotropic alignment of the polymer chain cluster, and a microgroove between the ripple pattern streaks. Also, they are periodically oriented along the rubbing direction. The optical phase retardation of the rubbed surface does not increase with increased cumulative time of rubbing, On the other hand, it increases monotonically with increasing rubbing depth.     

Surface morphology at nanometer level and optical phase retardation of rubbed alignment films

The surface morphology of rubbed polyimide LC aligning films has been studied by scanning force microscopy. We examined three types of alignment film: HT-210, AL-1051 (main chain type) and AL-8044 (side chain type) polyimide surfaces. The rubbed polyimide surfaces show anisotropic alignment of the polymer chain cluster, and a microgroove between the ripple pattern streaks. Also, they are periodically oriented along the rubbing direction. The optical phase retardation of the rubbed surface does not increase with increased cumulative time of rubbing, On the other hand, it increases monotonically with increasing rubbing depth.     

Rubbing-induced molecular reorientation on an alignment surface of an aromatic polyimide containing cyanobiphenyl side chains

Surface lamellar decoration (SLD), surface enhanced Raman scattering (SERS) and optical second harmonic generation (SHG) experiments have been utilized to study the molecular orientation and conformation changes at a rubbed polyimide alignment-layer surface. This aromatic polyimide containing pendent cyanobiphenyl mesogens was synthesized via a polycondensation of 2,2'-bis(3,4-dicarboxy-phenyl)hexafluoropropane dianhydride (6FDA) with bis[omega-[4-(4-cyanophenyl)phenoxy]hexyl] 4,4'-diamino-2,2'-biphenyldicarboxylate (nCBBP, n = 6), abbreviated as 6FDA--6CBBP. Uniform alignment layers, possessing high pretilt angles ranging from 39 degrees to 43 degrees, have been achieved after mechanical rubbing of the polyimide thin film surface at room temperature and subsequent annealing. This is the first time that high pretilt angles have been detected to possess a negative angle (-theta(c)) with respect to the rubbing direction (i.e., opposite to the rubbing direction), considerably different from the conventional pretilt angle (theta(c)) observed along the rubbing direction. This observation is confirmed using magnetic null and SHG methods. Combined polyethylene (PE) SLD and atomic force microscopy experiments reveal that the azimuthal orientation distribution of the long axis of the edge-on PE lamellar crystals is oriented normal to the rubbing direction, indicating that the PE chains are aligned parallel to the rubbing direction. This SLD technique probes the anisotropic surface orientation of the outermost molecules of the rubbed polyimide layer. The SERS results show that prior to rubbing the surface, both the pendent cyanobiphenyls in the side chains and backbones possess nearly planar chain conformations at the polyimide surface. Mechanical rubbing causes not only tilting of the backbone moieties, such as imide-phenylene structure, but also significant conformational rearrangements of the pendent side chains at the surfaces. The molecular mechanism of this unusual alignment is due to the fact that the pendent cyanobiphenyls forms a uniformly tilted conformation on the rubbed surface, and the polar cyano groups point down toward the layer surface deduced from SHG phase measurements. This conformational rearrangement of the side chains results in the formation of fold-like bent structures on the surface, which directly leads to the long axis of cyanobiphenyls having the -theta(c) pretilt angle with respect to the rubbing direction.     

Synthesis and characterization of novel polyimides with 1-octadecyl side chains for liquid crystal alignment layers

A series of poly(amic acid)s have been synthesized from cyclobutane-1,2,3,4-tetracarboxylic dianhydride (CBDA), a functional diamine, 1-(3,5-diaminophenyl)-3-(1-octadecyl)-succinicimide and 4,4-diaminodiphenylmethane (DDM) to give liquid crystal alignment layers with high pretilt angle after a rubbing process for vertically aligned liquid crystal display devices. Inherent viscosities of the poly(amic acid)s measured were in the range 0.2–1.56 dl/g, which decreased with an increase of content of 1-(3,5-diaminophenyl)-3-(1-octadecyl)-succinicimide. The cured polyimide films had good transparency, which was above 95% at 400 nm. Surface energies of all the polyimide films prepared from 1-(3,5-diaminophenyl)-3-(1-octadecyl)-succinicimide were below 40.7 dyn/cm before the rubbing process, which resulted in very high pretilt angles above 89°. By a rubbing process, the surface energy of the polyimide prepared from diamine mixture with 10 mol% of 1-(3,5-diaminophenyl)-3-(1-octadecyl)-succinicimide and 90% of DDM increased from 40.7 to 42.7 dyn/cm. Copyright © 2007 John Wiley & Sons, Ltd.     

Self-assembled submicron-height terrace structures of pentacene single crystals formed in liquid crystal cells

A flat-surface single crystal structure of pentacene organic semiconductor was formed, with a submicron-height terrace structure, in liquid crystal solvent cells; the formation mechanism is discussed. By cooling the pentacene solution in a heated cell until supersaturated, a variety of segregated crystal morphology was observed, including dendrite, lozenge and needle-like crystals. Segregation of lozenge crystals was promoted by the appropriate pentacene concentration combined with the rubbing process of polyimide alignment layers, and the crystal morphology was examined in detailed. As a result, based on terrace-structural growth, low-profile flat-surface crystal morphology was found in addition to conventional pyramidal morphology. The molecular alignment of the flat pentacene crystal was confirmed by anisotropy of the microscopic Raman scattering intensity of the polarized incident light used for excitation. The self-assembly of flat thin single crystal plates, whose maximum size reach 150 µm approximately, may be applicable to practical electronic devices such as organic transistors.     

Zigzag defect-free alignment of surface stabilized ferroelectric liquid crystal cells with a polyimide irradiated by polarized UV light

Zigzag defect-free surface stabilized ferroelectric liquid crystal (SSFLC) cells were prepared using a photodegradable polyimide (PI) having a cyclobutane ring in the backbone. The PI layers were irradiated by polarized ultraviolet light (PUVL) at normal incidence to the surface, and characterized by UV and FTIR spectroscopy. The anisotropy originates from preferential cleavage of PI chains oriented parallel to the polarization direction of the irradiating PUVL. After the polarized UV light irradiation, the PI surface was much flatter than that after rubbing, but it induced a similar order parameter of dye-doped nematic LC molecules to that for a rubbed cell. Alignment of both the FLC molecules and the layer structure is important in SSFLC. After 40 min irradiation, the FLC molecules were well aligned homogeneously, and the FLC cells showed a uniform texture without zigzag defects which also indicates a well aligned layer structure. Zigzag defect-free alignment may result from the flatter surface, the much smaller and more constant pretilt angles, and the bigger cone angle than those achieved by rubbing.     

Zigzag defect-free alignment of surface stabilized ferroelectric liquid crystal cells with a polyimide irradiated by polarized UV light

Zigzag defect-free surface stabilized ferroelectric liquid crystal (SSFLC) cells were prepared using a photodegradable polyimide (PI) having a cyclobutane ring in the backbone. The PI layers were irradiated by polarized ultraviolet light (PUVL) at normal incidence to the surface, and characterized by UV and FTIR spectroscopy. The anisotropy originates from preferential cleavage of PI chains oriented parallel to the polarization direction of the irradiating PUVL. After the polarized UV light irradiation, the PI surface was much flatter than that after rubbing, but it induced a similar order parameter of dye-doped nematic LC molecules to that for a rubbed cell. Alignment of both the FLC molecules and the layer structure is important in SSFLC. After 40 min irradiation, the FLC molecules were well aligned homogeneously, and the FLC cells showed a uniform texture without zigzag defects which also indicates a well aligned layer structure. Zigzag defect-free alignment may result from the flatter surface, the much smaller and more constant pretilt angles, and the bigger cone angle than those achieved by rubbing.     

A study of the transition of liquid-crystal alignment from homeotropic to planar on a polyimide layer

The alignment of nematic liquid crystals by rubbed polyimide surfaces has been well-studied and developed. A novel polyimide film which induced a homeotropic alignment of the nematic liquid crystal without rubbing or with weak rubbing strength was presented. However, there was a transition from homeotropic to planar alignment of the nematic liquid crystal after strong rubbing. In order to study the transition, the polyimide surface was investigated by atomic force microscopy, surface free energy measurement and angle-resolved analysis X-ray photo-electron spectroscopy before and after rubbing with a velvet fabric. It was found that both the change of surface polarity and surface morphology were not the reasons for the transition. The droop of the side chain on the polyimide surface after the rubbing treatment was detected by angle-resolved analysis X-ray photo-electron spectroscopy. Owing to the special structure of the novel polyimide, the X-ray photo-electron spectroscopy was successfully used for the first time to analyse the conformational change of the side chain of a polymer. In conclusion, the transition of nematic liquid crystal alignment from homeotropic to planar after rubbing was influenced by the side chain conformation of the polyimide.     

Synthesis of novel aromatic polyimides containing bulky side chain for vertical alignment liquid crystals

In this study, a novel 4-（4-octyloxybenzoyloxy）biphenyl-3′,5′-diaminobenzoate and polyimides based on it were synthesized. The polyimide with mesogenic unit side chain exhibited excellent vertical alignment for nematic liquid crystal （LC）. The pretilt angles of LCs above 89° were kept after the rubbing process with 220 mm rubbing strength. The polyimide films as the alignment layer were baked at 120℃ for 12 h, the vertical alignment of LCs was still uniform and stable. Meanwhile, the UV-vis spectra of the noyel polyimide films showed the high transparency in a visible wave length.     

Asymmetrically tilted alignment of rigid-rod helical polysilanes on a rubbed polyimide surface

The homogeneous alignments of helical rod-like polysilanes on a rubbed polyimide alignment layer were investigated by polarized optical microscopy (POM) and atomic force microscopy (AFM) analyses. The POM and AFM observations determined that polysilanes with a series of aliphatic side chains helically arranged around the main chains were tilted to the right and left by 33° from the rubbing direction when the handedness of the side-chain helical array is left and right, respectively. It is interesting to note that the side-chain arrays run perpendicular to the rubbing direction on the polyimide surface, which is different from intuitive "knob and hole" packing of the extended polyimide chain and the helical grooves between the side-chain arrays surrounding the polysilane backbone. More surprisingly, both right- and left-tilting smectic domains were simultaneously observed with an equal probability for an achiral polysilane, which apparently has the interconverting right- and left-handed helical segments separated by helical reversals. This might be the first observation of the chiral segregation of dynamic helical polymers.     

Atomic force microscopy of mechanically rubbed and optically buffed polyimide films

Polymer coated substrates modified both by mechanical rubbing and optical buffing have been found to cause liquid crystal molecules to align. Atomic force microscopy (AFM) was used to characterize the differences and similarities in polyimide substrate coatings after being subjected to these two processes. Though the buffing processes caused similar alignment on the surfaces, it was found that the mechanical rubbing created grooves on the order of 250nm, whereas optical buffing resulted in no changes to topographic structure on the order of 100nm scale and some variations at smaller scales. From this observation it was confirmed that the interaction causing the alignment must be associated with molecular alignment rather than large scale physical grooving.     

Novel alignment method for control of high pretilt angle by using a solvent dipping effect on polymer surfaces

A novel alignment method for control of high pretilt angle in nematic liquid crystals (NLC), using a solvent dipping effect on various alignment layers, was successfully investigated. The pretilt angle of a NLC is increased by dipping before rubbing treatment on three kinds of rubbed polyimide (PI) surfaces. The pretilt generated by the dipping after rubbing a PI surface with a short side chain is high compared with a PI surface with a long side chain. The pretilt generated by dipping before rubbing homeotropic layer of a positive type NLC (δε > 0) is lower than that of the negative type NLC (δε < 0). The generated NLC pretilt angle is attributed to the perpendicular component of the permittivity epsilon of the NLC.     

Cell processing on polyimide surface patterned by rubbing

In this study, we prepared a novel rubbed fluorinated polyimide film using a rubbing machine with a rubbing cloth and determined the surface properties of the rubbed film using an atomic force microscope and contact angle measurements. In addition, we evaluated the cell adhesion behavior on the rubbed polyimide film using a phase contrast microscope. Interestingly, a rubbed polyimide surface having a micrometer‐scale grooved pattern was prepared by the rubbing method, and the morphologies of rat primary hepatocytes and human liver cell lines attached to the rubbed surface were three‐dimensional multicellular spheroids, while the cells on an unrubbed surface showed two‐dimensional monolayers. This initial study indicates that the rubbing method without any chemical modification is simple and can easily produce large surface areas, suggesting that the rubbing may become a novel cell culture method. Copyright © 2008 John Wiley & Sons, Ltd.     

可溶性聚酰亚胺液晶取向膜的制备与性能

液晶取向膜是液晶显示器中的关键材料,为了制得性能优良的液晶取向膜,我们通过铃木偶联反应制备了3种含有不同末端基团的3,5-二氨基联苯,将制得的3种二胺单体分别与环丁烷四甲酸二酐聚合得到3种新型的聚酰亚胺。 利用核磁氢谱对单体和聚合物的结构进行了表征,测试了聚合物的溶解性、热稳定性以及用作液晶取向膜的性能。 结果表明,所得的聚酰亚胺具有良好的溶解性和热稳定性,经过机械摩擦后,末端带有甲氧基的聚酰亚胺能使液晶分子平行于摩擦方向取向,末端带有苯氧羰基和联苯氧羰基的聚酰亚胺能使液晶分子垂直于摩擦方向取向。 此类可溶性的聚酰亚胺液晶取向膜将简化制备工艺并在柔性显示器件中具有较大的应用价值。     

Influence of the washing process on the aligning capability of a nematic liquid crystal on polymer surfaces

The influence of washing processes on the liquid crystal (LC) aligning capability on rubbed polyimide (PI) surfaces containing the CONH moiety were investigated. The induced optical retardation from a non-washing process on a rubbed PI surface is larger than when the washing processes are included. The pretilt angles in 4-n-pentyl-4'-cyanobiphenyl (5CB) were decreased by the washing process. The polar anchoring energy of 5CB was decreased by the washing processes on a weakly rubbed PI surface. The surface order parameter S_S of 5CB strongly depends on the rubbing strength and washing materials. Consequently, the LC aligning capability may be strongly attributed to the polymer characteristics and the washing processes.     

Rubbing-induced anisotropy of long alkyl side chains at polyimide surfaces

Molecular organization at polyimide surfaces used as alignment layers in liquid crystal displays was investigated using vibrational sum frequency generation (SFG) spectroscopy. We focus on the orientation of the long alkyl side groups at the polymer surface using polarization-selected SFG spectra of the CH(3)- and CH(2)-stretch modes of the side chain. Mechanical rubbing and baking, an accepted industrial procedure used to produce pretilt of the liquid crystal, was found to induce pronounced azimuthal anisotropy in the orientational distribution of the alkyl side chains. Orientational analysis of the SFG vibrational spectra in terms of the azimuthal and tilt angles (in and out of plane, respectively) of the alkyl side chains shows their preferential tilt along the rubbing direction, with the azimuthal distribution narrower for stronger rubbed polymer samples.