Separation of phenolic acids in soil and plant tissue extracts by co-electroosmotic capillary electrophoresis with direct UV detection

Summary A capillary zone electrophoretic method for the analysis of phenolic acids in soil and plant extracts was developed with direct UV detection using a phosphate electrolyte solution. The electrophoretic separation required the phenolic acids to be charged at a pH above their pKa in order to achieve their migration towards the anode. Electroosmotic flow (EOF) was reversed in direction by adding tetradecyltrimethylammonium bromide (TTAB). Factors affecting the separation selectivity, including the buffer pH and EOF modifiers, were investigated systematically. Eight phenolic acids were separated and detected in 10 min using an electrolyte containing 25 mM phosphate, 0.5 mM TTAB and 15% acetonitrile (v/v) at pH of 7.20. Linear plots for the test phenolic acids were obtained in a concentration range of 0.01–1 mM with detection limits in the range of 1.0–7.0 μM. The recoveries ranged from 92.8 to 102.3% in soil and plant tissues samples spiked at 100 μM and the relative standard deviation based on the peak area were ranged 2.0 to 4.5%. The proposed method was used for the determination of phenolic acids in plant tissue and soil extracts with direct injection.     

Separation of organic and inorganic arsenic species by capillary electrophoresis using direct spectrophotometric detection

Capillary electrophoresis (CE) with UV detection was used for the determination of arsenite, arsenate, monomethylarsonic acid, dimethylarsinic acid, p-aminophenylarsonic acid, 4-hydroxy-3-nitrobenzenearsonic acid, 4-nitrophenylarsonic acid, phenylarsonic acid, and phenylarsine oxide. The electrophoretic mobilities of these anionic species were determined in a 20 mM phosphate buffer in a pH range from 4 to 11, which established pH 10 as the optimum for the separation. The target analytes were then separated in a fused-silica capillary using 20 mM NaHCO(3)-Na(2)CO(3) buffer, pH 10, as electrolyte and detected at 192 nm. Both normal- and reversed electroosmotic flow (EOF) separation modes were investigated and in the latter case, poly(diallydimethylammonium chloride) (PDDAC), was used for dynamic coating of the capillary and to provide a stable and reproducible reversed EOF (relative standard deviation RSD, 0.39%). The influence of electrolyte pH and composition, applied voltage, as well as EOF reversal protocols upon the method performance criteria were investigated. The optimised method provided limits of detection for the target analytes of 1.62, 6.22, 1.45, 1.83, 0.34, 0.40, 0.40, 0.18, and 0.30 mg/L As, respectively. Linearity was obtained in the range of 0.5-40 mg/L As (for aryl compounds) and from 5-100 mg/L As (for the remaining analytes). Reproducibility of peak areas was in the range of 0.8-5.5% RSD. The method was applied to the determination of four aryl arsenic compounds used as additives in animal feed. Analytes were extracted with 40 mM hydrochloric acid - acetonitrile 4:1 v/v, and then cleaned up by passing through a C(18) solid-phase extraction cartridge before analysis by CE with detection at 200 nm. Recoveries for the four analytes were in the range of 78.8-108.3%.     

Simultaneous determination of first-line anti-tuberculosis drugs by capillary zone electrophoresis using direct UV detection

An alternative methodology for simultaneous analysis of ethambutol, isoniazid, rifampicin and pyrazinamide in pharmaceutical formulations by capillary zone electrophoresis under UV direct detection with an analysis time of 8.0 min is proposed. Background running was based on the effective mobility curve of the analytes and an optimum separation condition was achieved using a 3³ Box-Behnken design, with Brij 35, Cu²⁺ and acetic acid/sodium acetate buffer as factors. An electrolyte consisting of 50.0 mmol L⁻¹ of acetic acid/sodium acetate buffer, 12.5 mmol L⁻¹ of CuSO₄, and standard and sample solutions prepared in 2.00 mmol L⁻¹ of Brij 35 and 12.5 mmol L⁻¹ of CuSO₄ were optimized. After evaluating validation parameters, the method was successfully applied to the analysis of samples in the form of tablets and sachets.     

Enhanced selectivity and sensitivity for inorganic anions using an ion-pairing reagent and sample stacking in capillary zone electrophoresis with direct UV detection

In this paper, the use of an ion-pairing reagent to improve the separation selectivity of inorganic anions in CZE was demonstrated by the addition of tetramethylammonium hydroxide (TMAOH) to the electrolyte. The separation of inorganic anions (Cl(-), I(-), Br(-), NO(2)(-), NO(3)(-) and SCN(-)) was performed using co-electroosmotic flow (EOF) with direct UV detection at 185 nm. The parameters affecting the mobility of the tested anions and the EOF such as the electrolyte pH and concentration of TMAOH in the electrolyte were examined to optimise the separation conditions. In addition, sample-stacking techniques were investigated to improve detection sensitivity. Detection sensitivities were improved 5-13-fold using electrokinetic sample stacking. The detection limits ranged from 1-3 micro mol L(-1). Finally, the proposed method was used for the separation of anions in groundwaters.     

The determination of bromide in a local anaesthetic hydrochloride by capillary electrophoresis using direct UV detection

The determination of residual amounts of bromide in a local anaesthetic hydrochloride by capillary electrophoresis was developed. Direct UV detection at 200 nm was used for the determination of the bromide content. The separation capacity of the system must be sufficient when bromide is determined in the presence of a large excess of chloride since electromigration dispersion of the highly concentrated chloride peak may impair the resolution. The background electrolyte (BGE) contained both acetonitrile and methanesulphonic acid in order to improve the selectivity and minimise the electromigration dispersion. The system was optimised with respect to resolution of the chloride and the bromide peaks by statistical experimental design using a multivariate optimisation program. The developed method was validated in accordance with the ICH guidelines and proved to be suitable for its intended use.     

Application of co-electroosmotic capillary electrophoresis for the determination of inorganic anions and carboxylic acids in soil and plant extract with direct UV detection

Summary Indirect UV detection in capillary zone electrophoresis (CZE) is frequently used for the determination of inorganic anions and carboxylic acids. However, there are few reports on direct UV detection of these solutes in real samples. This paper describes the use of direct UV detection of inorganic anions and organic acids in environmental samples using co-electroosmotic capillary zone electrophoresis (co-CZE) at 185 nm. The best separation and detection of the solutes was achieved using a fused silica capillary with an electrolyte containing 25 mM phosphate, 0.5 mM tetradecyltrimethylammonium bromide (TTAB) and 15% acetonitrile (v/v) at pH 6.0. Four common inorganic anions (Cl⁻, NO₂ ⁻, NO₃ ⁻ and SO₄ ²⁻) and 11 organic acids (oxalic, formic, fumaric, tartaric, malonic, malic, citric, succinic, maleic, acetic, and lactic acid), were determined simultaneously in 15 min. Linear calibration plots for the test solutes were obtained in the range 0.02–0.5 mM with detection limits ranging from 1–9 μM depending on the analyte. The proposed method was successfully used to determine inorganic anions and carboxylic acids in soil and plant tissue extracts with direct injection of the sample.     

Separation of arsenic anions by capillary zone electrophoresis with UV detection

Summary Capillary zone electrophoresis (CZE) in capillary silica columns has been used for the separation of arsenite (AsO ₂ ^– ), arsenate (AsO ₄ ^3– ), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA). The separation of these ionic species has been achieved using a capillary silica column (72 cm×50 m i.d.) with an acidic phosphate buffer and with an on-column UV detection (190 nm). Optimization of experimental parameters (pH, temperature, voltage) were studied. The selectivity of the separation can be improved by working in the pH-range of 4.5–6.5. For analytical inorganic separations of UV-absorbing anions, capillary zone electrophoresis has advantages because of the relatively simple equipment, the short analysis time (15 min), the high efficiency and the low mass detection limit (40 pg for arsenate).     

Determination of arsenic species by capillary zone electrophoresis with large-volume field-amplified stacking injection.

Determination of arsenic species by large-volume field amplified stacking injection-capillary zone electrophoresis (LV-FASI-CZE) is reported in this paper. Whole column injection was employed. The optimum buffer pH for the separation of weak acids was discussed. It was found that the optimum buffer to analyze the stacked arsenate (As(V)), monomethylarsonate (MMA), and dimethylarsinate (DMA) was 25 mM phosphate at pH 6.5. However, the optimum buffer to analyze the concentrated arsenite (As(III)) was 20 mM phosphate - 10 mM borate at pH 9.28. The limits of detection of the method developed were 0.026 mg/L for As(III), 0.023 mg/L for As(V), 0.043 mg/L for MMA, and 0.018 mg/L for DMA. An enrichment factor of 34-100 for several arsenic species was obtained. In the end, this method was applied to determine the arsenic concentration in the environmental reference materials to show the usefulness of the method developed.     

Separation and direct UV detection of lanthanides complexed with cupferron by capillary electrophoresis

Separation and detection of lanthanides by capillary zone electrophoresis in the presence of cupferron (N-nitroso-N-phenylhydroxylamine) as UV absorbing complexing agent were investigated. The resolution of partially complexed positively charged cupferron complexes is improved by using a buffer ligand competing with cupferron for metal ions. When hydroxyisobutyric acid (HIBA) is used as buffer and competing ligand, it provides complete separation of all 14 lanthanides with good peak shapes. An on-column separation of 14 lanthanides was achieved in only 7 min using 0.1 mmol/l cupferron, 15 mmol/1 HIBA at pH 4.9. The separation efficiencies for the optimum separation condition are between 77,000 and 208,000 theoretical plates. Determination of lanthanide complexes was performed by direct UV detection at 210 nm. Detection limits (signal-to-noise ratio=3) are ca. 0.24-0.47 microg/ml for lanthanides. Under optimum conditions, the complete separation of thorium and uranium from mixed lanthanides was achieved.     

高效毛细管电泳紫外检测法分离检测射干苷和鸢尾黄素

建立了毛细管电泳法测定射干药材中的射干苷和鸢尾黄素.探讨了检测波长、缓冲体系、缓冲液浓度和pH、分离电压等对分离的影响.在最优条件为20 mmol/L硼砂(pH 9.0),分离电压20 kV,被测物在10 min内实现基线分离.射干苷和鸢尾黄素的回收率分别为94.4%、93.5%,RSD分别为3.3%、2.8%.该法已...     

On-line concentration of trace genistein by acid barrage stacking in capillary electrophoresis with UV detection

A capillary electrophoresis method with UV detection was developed for high sensitively determining genistein. In this method, the online acid barrage stacking was applied. Four key factors influencing the stacking efficiency were systematically optimized. Genistein can be detected within 5 min at the concentration of 10 nmol/L, which was 300 times lower than that from conventional hydrodynamic injection. The repeatability, linear range, and limit of detection of the method were investigated with satisfactory result.     

Determination of oxalic acid in urine by co-electroosmotic capillary electrophoresis with amperometric detection

Co-electroosmotic capillary electrophoresis with amperometric detection at a Cobalt phthalocyanine (CoPC) modified carbon paste electrode was evaluated for the determination of oxalic acid in urine. The running buffer consisted of 10 mM phosphate (pH=5.70) and 0.25 mM Cetyltrimethylammonium bromide. Under the optimum conditions, a detection limit of 0.12 muM was achieved for oxalic acid. The response was linear between 0.5 and 1000 muM with a correlation coefficient of 0.9995. Applications of the method to real urine samples were described.     

Signal enhancement in capillary electrophoresis by using a sleeve cell arrangement for optical detection

This study comparts signal enhancement and efficiency in CZK employing three modes of detection: the sleeve cell (a simple method for creating a region of extended path length for absorption detection), the bubble cell (extended light path capillaries), and on-column detection in 75 μm i.d. capillary. Flow profile in the sleeve cell was monitored under a microscope. An abrupt change in capillary diameter in the sleeve cell region (from 50 μm to 220 μm) did not produce extensive band broadening. The sleeve-cell detection arrangement delivered a 3.5 fold increase in corrected peak area when compared with an oil-column detection in 75 μm i.d. column.     

Fast enantiomeric separation with vancomycin as chiral additive by co-electroosmotic flow capillary electrophoresis: increase of the detection sensitivity by the partial filling technique

A fast and sensitive method is described by using vancomycin as a chiral additive for enantiomeric separation by capillary electrophoresis (CE). In order to overcome disadvantages associated with use of vancomycin as chiral additive in CE, several strategies including the dynamic coating technique, the co-electroosmotic flow technique, and the partial filling technique were employed sequentially in this method. Using the polycationic polymer hexadimethrine bromide (HDB) as a buffer additive, the capillary wall was dynamically coated with a thin film formed by the adsorbed HDB. Consequently, the adsorption of vancomycin onto the capillary wall was minimized via electrostatic repulsion between the coating of the capillary wall and the vancomycin molecule. In addition, the reversed electroosmotic flow (from cathode to anode) produced by the positively charged capillary wall migrates in the same direction of negatively charged analytes (co-electroosmotic flow electrophoresis). Thereby the electrophoretic mobility of negatively charged analytes were drastically accelerated leading to a short separation time of less than 3.4 min. The separation time was further reduced by the use of a short-end-injection technique. For example, the analysis time was achieved by as short as 55 s for a baseline separation of dansyl-alpha-amino-n-butyric acid. Concurrently, the partial filling technique was used to avoid the loss of detection sensitivity caused by the presence of vancomycin in the running buffer. The effect of several parameters, such as HDB concentration, buffer pH, plug length of the chiral selector, concentration of the chiral selector and applied voltage, on enantioselectivity were investigated toward optimization. Besides the advantage of a very short separation time, the method is characterized by high detection sensitivity, high selectivity, and high efficiency.     

Simultaneous determination of inorganic anions, carboxylic and aromatic carboxylic acids by capillary zone electrophoresis with direct UV detection

Co-electroosmotic capillary zone electrophoresis (CZE) with direct UV detection was developed for simultaneous determination of inorganic anions, carboxylic and aromatic carboxylic acids. These solutes were separated using a 30 mM phosphate buffer containing 1.0 mM tetradecyltrimethylammonium bromide (TTAB) and 20% (v/v) acetonitrile at pH of 6.5 and directly detected by UV at 190 nm. Calibration curves were linear in the range 0.01-2.0 mM, depending of the solutes. The detection limits ranged from 1.0 to 8.0 microM and the relative standards deviations (n=5) in range from 1.9 to 3.6% for the peak area. The proposed method was used to determine inorganic anions and carboxylic and aromatic acids in soil and plant tissue extracts.     

Direct determination of sialic acids in serum by capillary electrophoresis with UV detection

Summary A novel method for the determination of N-acetylneuraminic acid (NANA) and N-glycolylneuraminic acid (NGNA) has been developed using high-performance capillary electrophoresis with UV detection at 195 nm, without pre or post-column derivatisation. The acids were separated in a 50-cm, fused-silica capillary (50μ i.d, 45.5-cm effective length) with Na₂B₄O₇−Na₂HPO₄ buffer. The detection limit for NANA is a concentration of 9.6×10⁻⁶ M or, in terms of mass:3.879×10⁻¹⁴ mol (39 fmol). This method is applicable to determination of NANA in normal human serum. The results were also compared with those of the colorimetrie method.     

Trace determination of sulfonylurea herbicides in water and grape samples by capillary zone electrophoresis using large volume sample stacking

A sensitive and reliable method using capillary zone electrophoresis with UV-diode array detection has been developed and validated for trace determination of residues of sulfonylurea herbicides in environmental water samples and grapes from different origins. The analytes included are triasulfuron, rimsulfuron, flazasulfuron, metsulfuron-methyl, and chlorsulfuron. Optimum separation has been achieved on a 48.5-cm × 50-μm (effective length 40 cm) bubble cell capillary using 90 mM ammonium acetate buffer, pH 4.8, by applying a voltage of 20 kV at 25 °C and using p-aminobenzoic acid as the internal standard. In order to increase sensitivity, large volume sample stacking with polarity switching has been applied as on-line preconcentration methodology. For water samples, a solid-phase extraction (SPE) procedure based on the use of Oasis HLB cartridges was applied for off-line preconcentration and cleanup. For grape samples, the SPE procedure was achieved with C₁₈ sorbent, after extraction of the compounds with MeOH:H₂O (1:1) by sonication. The limits of detection for the studied compounds were between 0.04 and 0.12 μg/L for water samples and 0.97 and 8.30 μg/kg in the case of grape samples, lower in all cases than the maximum residue limits permitted by the EU for this kind of food. The developed methodology has demonstrated its suitability for the monitoring of these residues in environmental water and grape samples with high sensitivity, precision, and satisfactory recoveries.     

Determination of lactate or oxalate using injected lactate oxidase and peroxidase by capillary electrophoresis with UV detection

Two reactions, catalyzed by lactate oxidase (LO) and peroxidase, are initiated by a single injection of the enzymes and the substrate 2,2'-azino-bis(3-ethylene-thiazoline-6-sulfonic acid) (ABTS) into the capillary previously filled with the sample (lactate or lactate-oxalate mixture) and the run buffer containing NADH. The oxidized ABTS product upon reaction with NADH is converted to NAD(+) which is separated and detected in less than 2 min at 266 nm with a sample throughput of 7 min (including wash steps between samples). Simplex trade mark software is used to optimize the enzyme concentrations and reaction temperature. Consumption of the more expensive LO enzyme is only 1.4 x 10(-3) U per assay assuming 27 nL per injection. Linearity is established within the range from 0.0025 to 1 mM with R(2) of 0.9982. Recoveries of lactate from five spiked serum samples averaged 101%. Application of this method for the determination of oxalate as an inhibitor of LO is demonstrated.     

Separation of perfluorocarboxylic acids using capillary electrophoresis with UV detection

A capillary electrophoretic method with UV detection for separation and quantitation of perfluorocarboxylic acids (PFCAs) from C6-PFCA to C12-PFCA has been developed. The optimization of measurement conditions included the choice of the most appropriate type and concentration of buffer in the background electrolyte (BGE), as well as the type and the content of an organic modifier. The optimal separation of investigated PFCAs was achieved with 50 mM phosphate buffer and 40% isopropanol in the BGE using direct UV detection. The optimum wavelength for direct UV detection was optimized at 190 nm. For indirect detection, several chromophores were studied. Five mM 3,5-Dinitrobenzoic acid (3,5-DNBA) in 20 mM phosphate buffer BGE and indirect UV detection at 280 nm gave the optimal detection and separation performance for the investigated PFCAs. The possibility of on-line preconcentration of solutes by stacking has been examined for indirect detection. The detection limits (LODs) determined for direct UV detection ranged from 2 microg/mL for C6-PFCA to 33 microg/mL for C12-PFCA. The LODs obtained for indirect UV detection were comparable to those obtained for direct UV detection.     

Separation of arsenic species by capillary electrophoresis with sample-stacking techniques

A simple capillary zone electrophoresis procedure was developed for the separation of arsenic species (AsO(2)(2-), AsO(4)(2-), and dimethylarsinic acid, DMA). Both counter-electroosmotic and co-electroosmotic (EOF) modes were investigated for the separation of arsenic species with direct UV detection at 185 nm using 20 mmol L(-1) sodium phosphate as the electrolyte. The separation selectivity mainly depends on the separation modes and electrolyte pH. Inorganic anions (Cl(-), NO(2)(-), NO(3)(-) and SO(4)(2-)) presented in real samples did not interfere with arsenic speciation in either separation mode. To improve the detection limits, sample-stacking techniques, including large-volume sample stacking (LVSS) and field-amplified sample injection (FASI), were investigated for the preconcentration of As species in co-CZE mode. Less than 1 micromol L(-1) of detection limits for As species were achieved using FASI. The proposed method was demonstrated for the separation and detection of As species in water.