4-(2-乙氧羰基乙基)苯基硼酸的合成及工艺优化

以对甲酰基苯硼酸为起始原料,经Wittig-Horne反应、催化氢化2步反应合成了目标化合物,终产物结构经1H-NMR确证.通过单因素实验,分析了每一步反应的关键影响因素,对合成条件进行了优化,反应总收率为77.33％.该方法合成条件简单、原料廉价易得、操作简便且收率较高.     

添加碳元素合成化学计量比LiNiO2

本文采用添加碳元素、葡萄糖及使用多种试剂为原料的合成方法,合成了具有化学计量比的LiNiO2.分析了这些方法在合成反应中的作用,同时给出了合成LiNiO2的最佳反应条件.     

金属取代的合成云母-蒙脱石的制备研究

考察了不同条件下制备的镍取代合成云母-蒙脱石(NiSMM)的结晶情况,并进行了这些合成样品的反应活性评价。结果表明,NiSMM的合成条件远比文献报道的缓和,合成产物不仅有良好的结晶度,而且对正辛烷加氢异构化具有很高的反应活性。     

异辛醇中酶催化高效合成阿莫西林的研究

通过比较6种有机溶剂作为反应介质时对阿莫西林合成的影响,发现反应介质在保持酶的催化活性和稳定性方面发挥着非常重要的作用,确定异辛醇为酶催化合成阿莫西林的反应介质.通过研究不同温度下异辛醇中酶催化合成阿莫西林的时间曲线,确定了最佳反应温度和反应时间,通过对底物浓度和酶浓度进行响应面优化,最终得到阿莫西林合成的最优反应条件,在最优条件下可得到91.37%的最大阿莫西林产率.     

间－四（4－羟基苯基）卟啉金属配合物的固相合成研究

本文研究了在固相条件下ＴＨＰＰ与金属铜或铅配合物的合成，反应温度和引发剂对反应速率影响较大。合成产物的可见光谱、红外光谱和荧光光谱与液相条件下合成的样品一致     

稀土(镧)硫醇盐的合成与表征

以三氧化二镧为原料, 经过醇化, 制备了三(月桂硫醇)镧及三(巯基乙酸异辛酯)镧, 并对合成方法进行了优化. 采用热失重分析、FTIR光谱、感应耦合等离子色谱、元素分析和1H NMR对目标产物进行了表征. 确定合成稀土异丙醇盐最佳反应条件为: 反应温度80 ℃, 反应时间2 h; 合成三(月桂硫醇)镧的反应条件为反应温度110 ℃, 反应时间2 h, 月桂硫醇的摩尔分数过量24％; 合成三(巯基乙酸异辛酯)镧的反应条件为反应温度60 ℃, 反应时间2 h, 月桂硫醇过量32％.     

甾酮类化合物的碱催化自氧化反应的研究

酮类化合物的碱催化自氧化反应受底物的结构和反应条件的影响较大。不同的底物或不同的反应条件,可得不同类型的产物。在油菜甾醇内酯 B 环的合成中,曾探索了用该反应来合成内酯环。本文报道一些与三元环共     

尿素法合成氨基甲酸酯类化合物反应的研究进展

综述了有机胺、尿素和醇一步合成氨基甲酸酯类化合物反应的研究进展,重点讨论了合成反应中所涉及的催化剂、反应条件和反应机理,并对该合成方法的应用前景进行了展望。     

甲基丙烯酸二环己基苯甲酯的合成

以溴代环己烷和苯甲酸乙酯为原料,经过两步反应合成了甲基丙烯酸二环己基苯甲酯．探讨了影响反应的各种因素,找到了较好的合成条件．     

咪唑啉还原开环反应研究

报道了２－咪唑啉在硼氢化钠作用下的还原开环反应,研究了反应条件对反应产率的影响,讨论了反应机理以及这一新反应在乙二胺衍生物合成中的应用,提出了通过咪唑啉的还原开环反应制备不对称取代乙二胺的新合成方法．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.