Optimum structural parameters of fibers in LED-graded index fiber transmission systems

The loss in a low-loss multimode optical fiber consists of Rayleigh scattering loss and microbending loss. These losses depend on the structural parameters of the fiber. On the other hand, the coupling optical power from optical source into fiber and connection loss of fibers also depend on the parameters. This paper considers the combination of light emitting diode as an optical source and a graded index fiber as a transmission line and discusses the optimum parameters that give the longest possible span length between an optical transmitter and receiver.     

Fiber optics in japan

Abstract

This paper describes the recent progress in research and development of fiber optics in Japan. A review is presented of recent developments in fiber manufacturing, cabling, and fiber splicing. Experimental results are given for an optical communication system with optoelectronic components. Theoretical analysis and fundamental experiments are not included, nor are research activities in such devices as lasers or in such applications as those in medical fields. Transmission characteristics of optical fibers—in particular loss and pulse spreading—are assessed from the viewpoint of their structures. Various methods of fiber strengthening and structuring cables are described from the viewpoint of mechanical strength. Coupling efficiencies of detachable connectors and methods of permanent fiber splicing are described. Experimental results on optical fiber communication systems are presented and coupling techniques between a light source and an optical fiber are described.     

Origin of temperature dependence of microbending attenuation in fiber optic cables

Abstract

Temperature-induced changes in the attenuation of multimode optical fiber cables are shown to be caused by mismatch between the thermal expansion coefficients of the fiber and the cabling materials. A quantitative theoretical model of low temperature loss, based on the formation of fiber microbends by microvariations in the jacket concentricity, is described. This model applies to tightly jacketed, soft buffered cable designs. An equation relating the low temperature optical attenuation to cable parameters is derived using this model. Good agreement is obtained between this theoretical prediction and experimental results. The theoretical model is used to compare the effectiveness of different cable designs on reducing excess loss at low temperature.     

Relative Intensity Noise in Optical Single Side Band Systems with Multiple In-Line Amplifiers: Analysis and Validation

Abstract

This article analyzes and validates through simulation the influence of fiber nonlinearity, dispersion, and loss on the Relative Noise Intensity (RIN) spectrum at fiber output in externally modulated optical single side band (OSSB) systems. The analysis includes the RIN generated by the laser source, the effect of the OSSB modulator, and noise generated by the in-line optical amplifiers. The analysis takes into account conversion between phase noise and intensity noise introduced by fiber transmission. It is shown that, depending on the operating conditions, the system performance may be predominantly affected either by the laser RIN or by the noise generated by the in-line optical amplifiers. The impact of the OSSB modulator can be relevant when the RIN of the system is dominated by the laser noise and should therefore be considered.     

Alternative Wired and 60-GHz Wireless Full Duplex Access Based on a Polarization Orthogonal Dual-Tone Optical Millimeter-Wave Signal

Abstract

A novel full duplex fiber wireless link providing alternative wired and 60-GHz wireless access is proposed based on a polarization orthogonal dual-tone optical millimeter-wave signal. In a hybrid optical network unit, the downlink optical signal can be decomposed as a single-sideband optical millimeter-wave signal (baseband optical signal) for wireless (wired) access by a polarization controller and polarization beam splitter. The uplink optical carrier abstracted from the downlink optical signal makes the hybrid optical network unit free from the optical source. The simulation results show that both downlinks and uplinks for either wired or wireless access can maintain quite good performance over 60 km of fiber.     

Quantum cryptography based on quantum dots

Network protocols are formulated for the phase-coding and correlated-photon-pairs quantum cryptosystems. These protocols are free of the restriction imposed on the distance between the two legitimate users by the transmission loss in the optical fiber. A single-photon source and a source of correlated photon pairs based on quantum dots are proposed. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 8, 646–651 (25 April 1996) Published in English in the original Russian journal. Edited by Steve Torstveit.     

Full-Duplex Link Providing Alternative Wired and Wireless Broadband Access for the Wavelength-Division Multiplexing Passive Optical Network with a Uniform Converged Signal Format

Abstract

A full-duplex link implementing alternative wired and wireless access for wavelength-division multiplexing passive optical network is proposed with the uniformed three-tone converged optical signal, which provides a wired or wireless downlink access signal alternatively and an uplink optical carrier. The uplink optical carrier reversed by the converged optical signal makes the hybrid optical node unit free from the optical source. The simulation results show that the full-duplex link with a 10-Gb/s 16-quadrature amplitude modulation (16-QAM) downstream and 5 Gb/s binary upstream can provide both wired access with a bit-error rate below 10^?9 and radio-over-fiber-based wireless access with a bit-error rate below 10^?7 over 40 km of fiber without an optical source and optical amplifier in the hybrid optical node unit.     

4 × 4 Plastic Optical Fiber Star Coupler Incorporated with a Common Polymer Waveguide Optical Power Distribution Region

Abstract

Two types of 4 × 4 plastic optical fiber star couplers incorporated with a polymer waveguide as the optical power distributor are proposed, and their high performances are demonstrated. The characteristics of the proposed star coupler are investigated based on ray optics, and its power distribution performance is evaluated in terms of the flatness of the coupling ratio and the amount of the excess loss. Under the best conditions, the flatness of the coupling ratio and the excess loss of the fabricated device have been obtained as 2.0 dB and 2.5 dB, respectively.     

Analytical performance bounds for multi-tensor diffusion-MRI

PurposeTo examine the effects of MR acquisition parameters on brain white matter fiber orientation estimation and parameter of clinical interest in crossing fiber areas based on the Multi-Tensor Model (MTM).Material and methodsWe compute the Cramér–Rao Bound (CRB) for the MTM and the parameter of clinical interest such as the Fractional Anisotropy (FA) and the dominant fiber orientations, assuming that the diffusion MRI data are recorded by a multi-coil, multi-shell acquisition system. Considering the sum-of-squares method for the reconstructed magnitude image, we introduce an approximate closed-form formula for Fisher Information Matrix that has the simplicity and easy interpretation advantages. In addition, we propose to generalize the FA and the mean diffusivity to the multi-tensor model.ResultsWe show the application of the CRB to reduce the scan time while preserving a good estimation precision. We provide results showing how the increase of the number of acquisition coils compensates the decrease of the number of diffusion gradient directions. We analyze the impact of the b-value and the Signal-to-Noise Ratio (SNR). The analysis shows that the estimation error variance decreases with a quadratic rate with the SNR, and that the optimum b-values are not unique but depend on the target parameter, the context, and eventually the target cost function.ConclusionIn this study we highlight the importance of choosing the appropriate acquisition parameters especially when dealing with crossing fiber areas. We also provide a methodology for the optimal tuning of these parameters using the CRB.     

A review of biconical taper couplers

Abstract

An optical coupler distributes light from a main fiber to one or more branch fibers. Optical signals can also be passed bidirectionally along a single fiber [1]. Usually couplers are passive devices which are attached to other components in a system by means of optical fiber connectors, or may be joined to them by splicing. Several basic coupler designs have been discussed in the literature, each having some advantages and disadvantages. The biconical taper coupler [2] consists of two fibers that are fused and subsequently tapered. These fibers may have step or graded index profiles. Beam-splitter types [3] (consisting of discrete components) are generally expensive. Mixing rods are simple and can be ruggedly constructed, but an extra 3dB loss above packing fraction loss is incurred when used with graded index fibers [4].     

Experimental Electrically Reconfigurable Time-Domain Spectral Amplitude Encoding/Decoding in an Optical Code Division Multiple Access System

Abstract

An electrically reconfigurable time-domain spectral amplitude encoding/decoding scheme is proposed herein. The setup is based on the concept of temporally pulse shaping dual to spatial arrangements. The transmitter is based on a short pulse source and uses two conjugate dispersive fiber gratings and an electro-optic intensity modulator placed in between. Proof of concept results are shown for an optical pulse train operating at 1.25 Gbps using codes from the Hadamard family with a length of eight chips. The system is electrically reconfigurable, compatible with fiber systems, and permits scalability in the size of the codes by modifying only the modulator velocity.     

Properties of silver halide core-clad fibers and the use of fiber bundle for thermal imaging

Abstract

Optical infrared (IR) fibers with core-clad structure are of great importance because they have better qualities than unclad fibers for most IR fiber applications, especially in CO₂ laser power delivery and radiometry. We have fabricated core-clad polycrystalline silver halide optical fibers with different compositions and core diameters, and although their loss is still higher than that of unclad fibers, they already have many advantages and new capabilities. The behavior of the scattering loss along these fibers and other optical properties was measured and compared with that of unclad silver halide fibers. We show that the higher loss of clad fibers results mainly from excessive scattering. The improvement in the process of fabricating clad fibers enabled the production of new elements such as single-mode fibers (SMFs) and fiber bundles for thermal imaging.     

Time Domain Optical Spectrometry with Fiber Optic Waveguides

Abstract

The transit time, τ, of a light pulse in a fiber optic waveguide is a function not only of the fiber length but also of the frequency content of the pulse and, to some extent, the electric and magnetic field distributions within the fiber. Thus, we can write τ = τ(L, γ, μ, v) where L is the fiber length and γ is the wavelength. The integers and v index the mode of propagation which is excited. The purpose of this article is to review a number of ways the various transit time effects in optical fibers can be used to measure optical spectra in the time domain. Conventional spectrometers disperse the light spatially. The spectrum is measured either with an array of detectors or, if a single detector is used, by mechanically scanning some element of the spectrometer. The instruments described in this review use optical fibers to selectively delay the wavelength components of a modulated light source so that these components arrive sequentially at a single detector. If the light source is already pulsed, these instruments have the same inherent capability as a multiple detector spectrometer in terms of measurement time or signal-to-noise ratio. For a steady source, special modulation schemes can be used to improve the signal collection and reduce the effective dead time required to measure the dispersed light.     

Performance of Optical OFDM Receiver in the Presence of System Impairments

Abstract

Recently, there is an increasing interest in using orthogonal frequency division multiplexing schemes in advanced optical communication systems to compensate fiber dispersion. This article presents a comprehensive theoretical analysis to treat the optical orthogonal frequency division multiplexing scheme as a special case of optical subcarrier multiplexing system. An analytical expression is derived to calculate the laser power required to achieve a specific level of signal-to-noise ratio, as a function of various system and noise parameters. Simulations show that the presence of laser relative intensity noise may cause a signal-to-noise ratio floor, where the bit error rate cannot be improved further even when the laser power increases dramatically.     

Optical activity of incommensurate crystals with plane-wave modulation

A phenomenological approach is used to discuss the propagation of polarized light in the incommensurately modulated phases of crystals of the family A₂BX₄ with spatially averaged inversion symmetry. The Jones-matrix technique for an anisotropic inhomogeneous medium is used to calculate the optical parameters of a crystal with sinusoidally modulated dielectric parameters. It is demonstrated that these crystals can exhibit a weak optical activity, i.e., weaker than that of crystals without inversion symmetry. Also discussed are boundary conditions on the phase of the modulation wave at the surface of a crystal plate. Results are obtained suggesting that the optical properties of an incommensurately modulated crystal need not depend on the shape of the modulation wave. Fiz. Tverd. Tela (St. Petersburg) 39, 1360–1365 (August 1996)     

脉冲γ射线对光纤的辐射效应

介绍了光纤的损耗机制和γ射线对光纤的辐射效应,设计了针对脉冲γ射线作用于光纤而产生辐射感生损耗的实验测量系统。利用平均光子能量为0.3 MeV、脉冲宽度25 ns、剂量率2.03×107Gy.s-1,和平均光子能量为1.0 MeV、脉冲宽度25 ns、剂量率5.32×109Gy.s-1的2种脉冲γ射线分别作用于多模和单模光纤,分别采用波长为405,660,850,1 310和1 550 nm的激光光纤传输系统对辐射感生损耗进行了测量。获得了光纤辐射感生损耗和辐射剂量的关系,并对实验结果进行分析。从实验结果可以看出:在近红外到可见光范围内,脉冲γ射线对光纤作用产生的辐射感生损耗随探测波长减小而增大;在0.1~3.5 Gy剂量范围内,多模光纤辐射感生损耗和辐射剂量呈线性关系。分析辐射对光纤的作用机制和实验结果后得出:光纤基质原子的电子能级对传输光子的共振吸收而造成吸收损耗增加;光纤折射率分布的改变从而导致波导损耗增加。     

Achieving Optical Tri-Stability Through Periodic Metal-Dielectric Structure

Abstract

Through the modified transfer matrix method, the transmission properties of a one-dimensional coupled-resonator optical waveguide structure composed of metal layers and non-linear material layers is studied. Given proper incident frequency and structure parameters, an optical tri-stability has been achieved. The effect of loss has been considered.     

Asymmetrically Apodized Linearly Chirped Fiber Bragg Gratings for Efficient Pulse Compression

Abstract

A simple and stable technique of optical short pulse generation for soliton transmission based on external modulation is reviewe.By using nonlinearity of absorption characteristics of an electroabsorption modulator, ultra-short optical pulse trains having a shape close to sech² shape can be generated just with sinusoidal modulation, without ultra-short driving pulses and ultra-broad bandwidth of the modulator. The pulse width and the repetition rate can be varied by changing the electrical driving conditions. Quasi-transform-limited optical pulseswith time-bandwidth product of 0.32 were successfully generated by the sinusoidally driven InGaAsP electroabsorption modulator with up to 20 GHz repetition rate. An application of a λ/4-shifted DFB laser-electroabsorption modulator integrated light source to a single-chip soliton source is also described. The high quality of the modulator-generator pulses has been proven by long-distance soliton transmission over 6400 km at 2.5 Gb/s using a recirculating fiber loop.     

光纤照明用LED耦合装置设计

光纤照明用LED光源耦合装置多采用透镜组,其汇聚光斑小,但透镜组光能损失大。针对LED光源发光特性及聚合物光纤孔径大的特点,提出LED灯珠侧式安装和反射器切割移位优化法,设计一种基于椭圆反射器的光纤照明用LED耦合装置。运用John OFarrell的逼近算法计算出不同偏心率的椭圆反射器结构参数,结合光纤光学参数仿真比较耦合光效,得到一组偏心率和光纤直径匹配的高效耦合装置结构参数,并运用该方法设计了一款光纤直径10 mm、数值孔径0.5的光纤照明用LED耦合装置,其理想耦合光效达93.35%。     

Novel Design Method for Single-Mode Bend-Insensitive Fiber Appropriate for Fiber-to-the-Home Application

Abstract

A proposal for a new single-mode optical fiber design technique with ultra-low bending loss applicable in fiber-to-the-home operation is presented. The suggested design method is based on reverse problem engineering, which evaluates the refractive index profile. The most remarkable feature of this methodology is designing a bend-insensitive fiber without core radius and mode field diameter reductions. The designed structures exhibit ultra-low bending loss and high effective area simultaneously. Meanwhile, the residual stress of the designed structures is small due to gradual variation of the refractive index in the core region. Simulation results show a bending loss of 4.3 × 10^?4 dB/turn at 1.55 μm for a single turn of 5-mm radius.