Study on the Determination of Heavy-Metal Ions in Tobacco and Tobacco Additives by Microwave Digestion and HPLC with PAD Detection

A new method for the simultaneous determination of heavy-metal ions in tobacco and tobacco additive by microwave digestion and reversed-phase high-performance liquid chromatography (RP-HPLC) was developed. The tobacco and tobacco additive samples were digested by microwave digestion. The lead, cadmium, mercury, nickel, copper, and tin ions in the digested samples were precolumn derivated with tetra-(4-aminophenyl)-porphyrin (T₄-APP) to form color chelates; the Hg-T₄-APP, Cd-T₄-APP, Pb-T₄-APP, Ni-T₄-APP, Cu-T₄-APP, and Sn-T₄-APP chelates were then enriched by solid-phase extraction with C₁₈ disks and the retained chelates were eluted from the disks using tetrahydrofuran (THF). The chelates were separated on a Waters Xterra RP₁₈ column by gradient using methanol (containing 0.05 mol/L pyrrolidine-acetic acid buffer salt, pH 10.0) and acetone (containing 0.05 mol/L pyrrolidine-acetic acid buffer salt, pH 10.0) as a mobile phase at a flow rate of 0.5 mL/min and detected with a photodiode array detector in the range 350–600 nm. The detection limits of lead, cadmium, mercury, nickel, copper, and tin were 5, 4, 2.5, 5, 8, and 4 ng/L, respectively, in the original samples. The method was applied to the determination of lead, cadmium, mercury, nickel, copper, and tin in tobacco and tobacco additive with good results.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 5, 2005, pp. 542–548.Original English Text Copyright © 2005 by Yang, Li, Shi, Wang.This article was submitted by the authors in English.     

Simultaneous determination of four heavy metal ions in tobacco and tobacco additive by online enrichment followed by RP-HPLC and microwave digestion

A new method for the simultaneous determination of tin, lead, cadmium, and mercury in tobacco and tobacco additive by reversed-phase high-performance liquid chromatography combined with microwave digestion and an online enrichment technique is developed. The tin, lead, cadmium, and mercury ions are precolumn derivatized with tetra-(4-dimethylaminophenyl)-porphyrin (T(4)-DMAPP) to form color chelates. The Sn-T(4)-DMAPP, Hg-T(4)-DMAPP, Cd-T(4)-DMAPP, and Pb-T(4)-DMAPP chelates are absorbed onto the front of the enrichment column using a buffer solution of 0.05 mol/L pyrrolidine-acetic acid (pH = 10.0) as the mobile phase. After the concentration is finished (by switching the six-port switching valve) the retained chelates are back-flushed by the mobile phase and move to the analytical column. The chelate separation on the analytical column is satisfactory using gradient elution with methanol (containing 0.05 mol/L pyrrolidine-acetic acid buffer salt, pH = 10.0) and tetrahydrofuran (containing 0.05 mol/L pyrrolidine-acetic acid buffer salt, pH = 10.0). The linearity range is 0.01-120 micro g/L for each metal ion. The detection limits (S/N = 3) of tin, lead, cadmium, and mercury are 0.6, 0.8, 0.5, and 0.6 ng/L, respectively. This method is applied to the determination of tin, lead, cadmium, and mercury in tobacco and it's additive with good results.     

Determination of trace lead, cadmium and mercury by on-line column enrichment followed by RP-HPLC as metal-tetra-(4-bromophenyl)-porphyrin chelates

This paper reports the utilization of tetra-(4-bromophenyl)-porphyrin (T(4)BPP) as a chelating reagent using Waters Xterratrade mark RP(18) column for the on-line column enrichment and the separation of trace lead, cadmium and mercury ions by reversed-phase high-performance liquid chromatography (RP-HPLC) with photodiode array detector. When the Hg-T(4)BPP, Pb-T(4)BPP and Cd-T(4)BPP chelates were injected into the injector and sent to the enrichment column with 0.05 mol l(-1) of pH 10.0 pyrrolidine-phosphoric acid buffer solution (containing 10% of tetrahydrofuran (THF)) as mobile phase. The chelates were retained on the top of the enrichment column. After the enrichment is finished, by switching the valve of six-ports switching valve, the retained metal-T(4)BPP chelates will be eluted by mobile phase in reverse direction and will travel towards analytical column. With THF (containing 0.05 mol l(-1), pH 10.0 pyrrolidine-phosphoric acid buffer salt) and 0.05 mol l(-1), pH 10.0 pyrrolidine-phosphoric acid buffer solution (containinging 10% THF) gradient elution as mobile phase, the chelates separation on the analytical column was satisfactory. The linearity ranges are 0.01-120 mug l(-1) for each metal ion. The detection limits (S/N=3) of lead, cadmium and mercury are 1.0, 0.5 and 1.0 ng l(-1), respectively. This method can be applied to the determination (mug l(-1)) level of lead, cadmium and mercury in drinking water with satisfactory results.     

Simultaneous Determination of Tin,Nickel, Lead,Cadmium and Mercury in Tobacco and Tobacco Additives by Microwave Digestion and RP‐HPLC Followed by On‐Line Column Enrichment

A new method for the simultaneous determination of five heavy metal ions, tin, nickel, lead, cadmium and mercury ions as metal‐tetra‐(2‐aminophenyl)‐porphyrin (T₂APP) chelates was developed using reversed‐phase high performance liquid chromatography (RP‐HPLC) equipped with a photodiode array detector and combined with an on‐line enrichment technique. The tin, nickel, lead, cadmium and mercury ions were pre‐column derivatized with T₂APP to form color chelates. The Sn‐T₂APP, Ni‐T₂APP, Hg‐T₂APP, Cd‐T₂‐APP and Pb‐T₂APP chelates can be absorbed onto the front of the enrichment column when they are injected into the injector and sent to the enrichment column [Waters Xterra? RP₁₈(5μ, 3.9 × 20 mm)] with a buffer solution of 0.05 mol/L pyrrolidine‐acetic acid (pH = 10.0) as mobile phase. After the enrichment had finished, by switching the six‐port switching valves, the retained chelates were back‐flushed by mobile phase and traveling towards the analytical column. These chelates separation on the analytical column [Waters Xterra? RP₁₈ (5μ, 3.9 × 150 mm)] was satisfactory by gradient elution with methanol (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) and acetone (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) as mobile phase. The linearity range is 0.01?120 μg/L for each metal ion. The detection limits (S/N = 3) of tin, nickel, lead, cadmium and mercury are 4.0 ng/L, 3.5 ng/L, 2.5 ng/L, 3.0 ng/L and 3.0 ng/L, respectively. This method was applied to the determination of tin, nickel, lead, cadmium and mercury ions in tobacco and tobacco additives with good results.     

Determination of copper,nickel, cobalt,silver, lead,cadmium, and mercury ions in water by solid-phase extraction and the RP-HPLC with UV-Vis detection

A new method for the simultaneous determination of seven heavy metal ions in water by solid-phase extraction and reversed-phase high-performance liquid chromatography (RP-HPLC) was developed. The copper, nickel, cobalt, silver, lead, cadmium, and mercury ions were pre-column derivatized with tetra( m-aminophenyl)porphyrin (T m-APP) to form colored chelates. The metal-T m-APP chelates in 100 mL of sample were preconcentrated to 1 mL by solid-phase extraction with a C(18 )cartridge; an enrichment factor of 100 was achieved. The chelates were separated on a Waters Xterra()RP(18) column by gradient elution with methanol (containing 0.05 mol L(-1) pyrrolidine-acetic acid buffer salt, pH 10.0) and acetone (containing 0.05 mol L(-1) pyrrolidine-acetic acid buffer salt, pH 10.0) as mobile phase at a flow rate of 1.0 mL min(-1) and detected with a photodiode array detector. The detection limits of copper, cobalt, nickel, silver, lead, cadmium, and mercury are 2, 2, 3, 4, 3, 3, and 3 ng L(-1), respectively, in the original sample. The method was also applied to the determination of these metals in water with good results.     

Simultaneous Determination of Palladium and Platinum by On‐Line Enrichment Followed by Rapid Column High Performance Liquid Chromatography

In this paper, a new method for the simultaneous determination of palladium and platinum ions was developed using a rapid column high performance liquid chromatograph equipped with an on‐line enrichment technique. The palladium and platinum ions were pre‐column derivatized with 5‐(p‐aminobenzylidene)‐thiorhodanine (ABTR) to form colored chelates. The Pd‐ABTR, Pt‐ABTR chelates can be absorbed onto the front of an enrichment column when they were injected into the injector and sent to the enrichment column [ZORBAX Stable Bound, 4.6 × 10 mm, 1.8 μm] with a buffer solution of 0.05 mol/L sodium acetate‐acetic acid buffer solution (pH 3.5) as mobile phase. After the enrichment had finished, by switching the six‐ports switching valve, the retained chelates were back‐flushed by mobile phase and traveled towards the analytical column. These chelates separation on the analytical column [ZORBAX Stable Bound, 4.6 × 50 mm, 1.8 μm] was satisfactory with 65% methanol (containing 0.05 mol/L of pH 3.5 sodium acetate‐acetic acid buffer salt and 0.01 mol/L of tritonX‐100) as mobile phase. The palladium and platinum were separated completely within 2 min. The detection limits (S/N = 3) of palladium and platinum are 1.4 ng/L and 1.6 ng/L, respectively. This method was applied to the determination of palladium and platinum in water and urine samples with good results.     

Determination of Heavy Metal Ions in Chinese Herbal Medicine by Microwave Digestion and RP-HPLC with UV-Vis Detection

A new method for the simultaneous determination of heavy metal ions in Chinese herbal medicine by microwave digestion and reversed-phase high-performance liquid chromatography (RP-HPLC) has been developed. The Chinese herbal medicine samples were digested by microwave digestion. Lead, cadmium, mercury, nickel, copper, zinc, and tin ions in the digested samples were pre-column derivatized with tetra-(4-chlorophenyl)-porphyrin (T₄-CPP) to form the colored chelates which were then enriched by solid phase extraction with C₁₈ cartridge and eluted from the cartridge with tetrahydrofuran (THF). The chelates were separated on a Waters Xterra RP₁₈ column by gradient elution with methanol (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) and THF (containing 0.05molL^–1 pyrrolidine-acetic acid buffer salt, pH=10.0) as mobile phase at a flow rate of 0.5mLmin^–1 and detected with a photodiode array detector in the range of 350–600nm. In the original samples the detection limits of lead, cadmium, mercury, nickel, copper, zinc and tin are 4ngL^–1, 3ngL^–1, 6ngL^–1, 5ngL^–1, 2ngL^–1, 6ngL^–1, and 4ngL^–1, respectively. This method was applied to the determination of lead, cadmium, mercury, nickel, copper, zinc and tin in Chinese herbal medicine samples with good results.     

Simultaneous Determination of Palladium,Platinum and Rhodium by On‐Line Column Enrichment and a Rapid Column High Performance Liquid Chromatography with 2‐Carboxyl‐1‐Naphthalthiorhodamine as Precolumn Derivatization Reagent

Abstract

In this paper, 2‐carboxyl‐1‐naphthalthiorhodamine (CNTR) was synthesized, and a new method for the simultaneous determination of palladium, platinum, and rhodium ions as metal‐CNTR chelates was developed using rapid column high performance liquid chromatography combined with on‐line enrichment. The palladium, platinum, and rhodium ions were precolumn derivatized with CNTR to form colored chelates. The Pb‐CNTR, Pt‐CNTR, and Rh‐CNTR chelates could be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column (ZORBAX Stable Bound, 4.6×10 mm, 1.8 µm) with a buffer solution of 0.05 mol/L sodium acetate–acetic acid buffer solution (pH 3.5) as mobile phase. After enrichment, and by switching the six ports switching valve, the retained chelates were back‐flushed by mobile phase and traveling towards the analytical column. The separation of these chelates on the analytical column (ZORBAX Stable Bound, 4.6×50 mm, 1.8 µm) was satisfactory with 54% methanol (v/v) in 0.05 mol/L sodium acetate buffer (pH 3.5) containing 1 g/L Triton X‐100 as mobile phase. Palladium, platinum, and rhodium were separated completely within 2 min. The detection limits (S/N=3) of palladium, platinum, and rhodium are 1.4 ng/L, 1.2 ng/L, and 1.8 ng/L, respectively. This method was applied to the determination of palladium, platinum, and rhodium in water, urine, and soil samples with good results.     

Determination of palladium,platinum, and rhodium by HPLC with online column enrichment using 4-carboxylphenyl-thiorhodanine as a precolumn derivatization reagent

In the present work, 4-carboxylphenyl-thiorhodanine (CPTR) was synthesized. A new method for the simultaneous determination of palladium, platinum, and rhodium ions as metal-CPTR chelates was developed using rapid column high-performance liquid chromatography equipped with an online enrichment capability. Palladium, platinum, and rhodium ions were precolumn-derivatized with CPTR to form colored chelates. The Pd-CPTR, Pt-CPTR, and Rh-CPTR chelates can absorbed onto the front of the enrichment column (ZORBAX Stable Bound, 4.6 × 10 mm, 1.8 μm) when they are injected with a buffer solution of 0.05 M sodium acetate-acetic acid (pH 3.5) as mobile phase. After the enrichment had finished, by switching the six-port switching valve, the retained chelates were back-flushed by mobile phase and moved towards the analytical column. The chelate separation on the analytical column (ZORBAX Stable Bound, 4.6 × 50 mm, 1.8 μm) was achieved with 46% acetonitrile (containing 0.05 M of pH 3.5 sodium acetate-acetic acid buffer and 0.01 M tritonX-100) as mobile phase. The palladium, platinum, and rhodium were separated completely within 2 min. The detection limits (S/N = 3) of palladium, platinum, and rhodium are 1.4, 1.6, and 2.0 ng/L, respectively. The method was applied to the determination of palladium, platinum, and rhodium in water, urine, and soil samples with good results. The text was submitted by the authors in English.     

Determination of organic and inorganic mercury compounds by reverse-phase high-performance liquid chromatography after extraction of the compounds as their dithizonates

A sensitive and selective method is described for the simultaneous determination of inorganic and organic mercury compounds. The mercury compounds are extracted into toluene or chloroform with dithizone, and the dithizonates are separated by liquid chromatography on an ODS column. Complete resolution was obtained between methylethyl-, phenyl- and inorganic mercury with a mobile phase of THF/methanol (2:1) with 0.05 M acetate buffer pH 4 (62 + 38), containing 50 μM EDTA. The mercury chelates were detected spectrophotometrically at 475 nm. The detection limits were at the subnanogram level. The method is applicable to human urine, tap water and tomatoes.     

Simultaneous determination of palladium, platinum and rhodium by on-line column enrichment and HPLC with 5-(2,4-dihydroxyphenylazo)-rhodanine as pre-column derivatization reagent

In this paper, a new method for the simultaneous determination of palladium, platinum and rhodium ions was developed using a rapid column high performance liquid chromatography equipped with on-line enrichment technique. The palladium, platinum and rhodium ions were pre-column derivatized with DHAR to form colored chelates. The Pb-DHAR, Pt-DHAR and Rh-DHAR chelates could be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column [ZORBAX Stable Bound, 4.6 x 10 mm, 1.8 microm] with a 0.05 mol L(-1) of phosphoric acid solution as mobile phase. After enrichment, and by switching the six ports switching valve, the retained chelates were back-flushed by mobile phase and traveling towards the analytical column. The separation of these chelates on the analytical column [ZORBAX Stable Bound, 4.6 x 50 mm, 1.8 microm] was satisfactory with 54% acetonitrile (containing 0.05 mol L(-1) of phosphoric acid and 0.1% of tritonX-100) as mobile phase. Palladium, platinum and rhodium were separated completely within 2 min. By on-line enrichment technique, the enrichment factor of 100 was achieved, and the detection limits (S/N = 3) of palladium, platinum and rhodium reaches 1.4 ng L(-1), 1.6 ng L(-1) and 2.0 ng L(-1), respectively. This method was applied to the determination of palladium, platinum and rhodium in water, urine and soil samples with good results.     

Simultaneous determination of palladium, platinum, rhodium and gold by on-line solid phase extraction and high performance liquid chromatography with 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine as pre-column derivatization regents

In this paper, 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine (HNATR) was synthesized. A new method for the simultaneous determination of palladium, platinum, rhodium and gold ions as metal-HNATR chelates was developed using a rapid analysis column high performance liquid chromatography equipped with on-line solid phase extraction technique. The samples (Water, human urine, geological samples and soil) were digested by microwave acid-digestion. The palladium, platinum, rhodium and gold ions in the digested samples were pre-column derivatized with HNATR to form colored chelates. The Pd-HNATR, Pt-HNATR, Rh-HNATR and Au-HNATR chelates can be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] with a buffer solution of 0.05 mol L(-1) phosphoric acid as mobile phase. After the enrichment had finished, by switching the six ports switching valve, the retained chelates were back-flushed by mobile phase and travelling towards the analytical column. These chelates separation on the analytical column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] was satisfactory with 72% acetonitrile (containing 0.05 mol L(-1) of phosphoric acid and 0.1% of Triton X-100) as mobile phase. The palladium, platinum, rhodium and gold chelates were separated completely within 2.5 min. Compared to the routine chromatographic method, more then 80% of separation time was shortened. By on-line solid phase extraction system, a large volume of sample (10 mL) can be injected, and the sensitivity of the method was greatly improved. The detection limits (S/N=3, the sample injection volume is 10 mL) of palladium, platinum, rhodium and gold in the original samples reaches 1.4, 1.8, 2.0 and 1.2 ng L(-1), respectively. The relative standard deviations for five replicate samples were 2.4-3.6%. The standard recoveries were 88-95%. This method was applied to the determination of palladium, platinum, rhodium and gold in human urine, water and geological samples with good results.     

Study on Determination of Six Transition Metal Ions in Biological Samples by SPE and RP‐HPLC

This paper reports the utilization of solid phase extraction and the reversed‐phase high‐performance liquid chromatography (RP‐HPLC) for the determination of six transition metal ions (iron, cobalt, nickel, copper, zinc and manganese) in biological samples. The samples were digested by microwave digestion. The iron, cobalt, nickel, copper, zinc and manganese ions in the digested samples can react with 2‐(2‐quinolinylazo)‐5‐diethylaminophenol (QADEAP) to form colored chelates in pH 4.0 acetic acid‐sodium acetic buffer solutions and cetyl trimethylammonium bromide (CTMAB) medium. These chelates were enriched by solid phase extraction with C₁₈ cartridge. Then the chelates were separated on a Waters Nova‐Pak‐C₁₈ column (3.9 × 150 mm, 5 μm) by gradient elution with methanol (containing 0.5% of acetic acid and 0.1% of CTMAB) and 0.05 mol/L pH 4.0 acetic acid‐sodium acetic buffer solution (containing 0.1% of CTMAB) as mobile phase at a flow rate of 0.5 mL/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 3 ng/L, 4 ng/L, 2 ng/L, 4 ng/L, 8 ng/L, 10 ng/L, respectively. This method was applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in biological samples with good results.     

Study on the Determination of Cobalt,Nickel, Copper,Zinc and Vanadium in Environmental Samples by a Rapid High‐Performance Liquid Chromatography

A new method for the simultaneous determination of five transition metal ions in water and food by rapid high‐performance liquid chromatography was developed. The cobalt, nickel, copper, zinc and vanadium ions were pre‐column derivatized with 2‐(2‐quinolinylazo)‐4‐methyl‐1,3‐dihydroxidebenzene (QAMDHB) to form colored chelates, then the Co‐QAMDHB, Ni‐QAMDHB, Cu‐QAMDHB, Zn‐QAMDHB and V‐QAMDHB chelates were enriched by solid phase extraction with a C18 cartridge. The enrichment factor of 50 was achieved by eluting the retained chelates from the cartridge with tetrahydrofuran (THF). These chelates were separated on a ZORBAX Stable Bound rapid analysis column (4.6 × 50 mm, 1.8 um) with 68% methanol (containing 0.1% of acetic acid and 0.1% of CTMAB) as mobile phase at a flow rate of 2.0 mL/min and detected with a photodiode array detector from 450?600 nm. The Co‐QAMDHB, Ni‐QAMDHB, Cu‐QAMDHB, Zn‐QAMDHB and V‐QAMDHB chelates were separated completely within 2.0 min. The detection limits of cobalt, nickel, copper, zinc and vanadium are 2 ng/L, 1.5 ng/L, 2 ng/L, 3 ng/L, and 3 ng/L, respectively, in the original samples. This method was applied to the determination of the five transition metal ions in water and food samples with good results.     

Simultaneous Determination of Palladium, Platinum and Rhodium by On-Line Column Enrichment and HPLC with 4-Hydroxy-1-Naphthalthiorhodanine as Pre-Column Derivatization Reagents

In this paper, 4-hydroxy-1-naphthalthiorhodanine (HNTR) was synthesized, and a new method for the simultaneous determination of palladium, platinum and rhodium ions as metal-HNTR chelates was developed using rapid column high-performance liquid chromatography combined with on-line enrichment. The palladium, platinum and rhodium ions were pre-column derivatized with HNTR to form colored chelates. The Pb-HNTR, Pt-HNTR and Rh-HNTR chelates could be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column [ZORBAX Stable Bound, 4.6 × 10 mm, 1.8 μm] with a buffer solution of 0.05 mol L⁻¹ sodium acetate-acetic acid (pH 4.0) as mobile phase. After enrichment, and by switching the six-ports switching valve, the retained chelates were back-flushed by mobile phase and traveling towards the analytical column. Separation of these chelates on the analytical column [ZORBAX Stable Bound, 4.6 × 50 mm, 1.8 μm] was satisfactory with 68% acetonitrile (containing 0.05 mol L⁻¹ of pH 4.0 sodium acetate-acetic acid buffer salt and 0.1% of tritonX-100) as mobile phase. Palladium, platinum and rhodium were separated completely within 2 min. The detection limits (S/N = 3) of palladium, platinum and rhodium are 1.2 ng L⁻¹, 1.5 ng L⁻¹ and 1.8 ng L⁻¹, respectively. This method was applied to the determination of palladium, platinum and rhodium in water, urine and soil samples with good results.     

Determination of lead, cadmium and mercury in microwave-digested foodstuffs by RP-HPLC with an on-line enrichment technique.

A new method for the simultaneous determination of lead, cadmium and mercury ions in microwave-digested foodstuffs by reversed-phase high-performance liquid chromatography combined with on-line enrichment technique has been developed. The foodstuff samples were digested by microwave digestion. The lead, cadmium and mercury ions can be precolumn derivatized with 5,10,15,20-tetrakis(3-aminophenyl)porphine (T3APP) to form color chelates; then, the Hg-T3APP, Cd-T3APP and Pb-T3APP chelates can be enriched and separated on a valve switching HPLC system combined with on-line enrichment technique. The linearity ranges are 0.01-120 microg/l for each metal ion. The detection limits (S/N = 3) of lead, cadmium and mercury are 1.2 ng/l, 0.5 ng/l and 0.8 ng/l, respectively. This method was applied to the determination of lead, cadmium and mercury in foodstuffs with good results.     

Reversed phase HPLC determination of titanium(IV) and iron(III) with sodium 1,2-dihydroxybenzene-3,5-disulfonic acid

A highly sensitive method has been developed for the determination of titanium(IV) and iron(III) by ion-pair reversed phase liquid chromatography using sodium 1,2-dihydroxybenzene-3,5-disulfonic acid (Tiron) as a precolumn chelating reagent. The metal - Tiron chelates were separated on a C₁₈ (ODS) column; the mobile phase was a 2:8 (v/v) mixture of acetonitrile and acetate buffer (0.04 mol/L, pH 6.2) containing 2.0 × 10^?3 mol/L Tiron, 0.04 mol/L tetrabutylammonium bromide, and 0.1 mol/L potassium nitrate. The detection limits for titanium(IV) and iron(III) are 0.5 and 2.0 μg/L, respectively. The method has been applied to the simultaneous determination of titanium(IV) and iron(III) in river water samples and has furnished highly precise results.     

4－（2－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Fe、Co、Ni

４－（２－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Ｆｅ、Ｃｏ、Ｎｉ格日勒，李惠梅，李南强，汪尔康（中国科学院长春应用化学研究所电分析化学开放实验室，北京大学化学系，长春，１３００２２）关键词液相色谱，Ｆｅ，Ｃｏ，Ｎｉ，４－（２－氨基噻唑）...     

Chromatographic behavior of cadmium in an ion-pair reversed-phase micro HPLC system and its application to the determination of bio-available cadmium in soil samples

A novel reversed phase ion-pair micro HPLC system with on-line fluorescence detection has been developed systematically and studied for the determination of cadmium in its bio-available fractions of soil samples. In this system, a micro ODS column of 1.0 mm i.d.×150 mm length and a mobile phase containing 6 mmol L^-1 8-hydroxyquinoline 5-sulphonic acid (HQS), 3 mmol L^-1 cetyltrimethylammonium bromide (CTMABr), 10 mmol L^-1 acetic acid-acetate buffer (pH 5.1) as well as 50% acetonitrile at 50 L min^-1 flow rate were employed to determine cadmium with a 2 L flow cell through its fluorescence at 518 nm under 338 nm excitation. Furthermore, the composition of Cd-HQS chelate formed on the column was confirmed to be [Cd(HQS)₂]^2- through a log–log plot method, and then combined with the ion-pair reagent by the electrostatic force under the chromatographic condition proposed. With such a method, the detection limit of cadmium was 8.48 ng mL^-1 (3) with 1 L sample injection, and the linear range for the determination of cadmium was 30–800 ng mL^-1 (R²=0.992). This method has been successfully applied to determination of cadmium in its bio-available fractions of BCR-483 and soil samples without interference from other coexistent metal ions. The RSD (n=6) was less than 7.3%. The results were in agreement with the indicative value for BCR-483 and those for the soil samples obtained by ICP-MS with a pretreatment of bis(1,1,3,3-tetramethylbutyl) phosphinic acid extraction.     

The formation of mixed ligand complexes by metal chelates and some buffer components

A method for the determination of the stability constants of mixed ligand Complexes of metals is described. The influence of the buffer components ammonia (NH₃), imidazole (Im)and hexamethylenetetramine (U) on the murcury (II)-TTHA system was investigated. The binuclear mercury (II)-TTHA chelate has a strong tendancy to coordinate two additional ligands. The following stability constants of mixed ligand chelates were determined:

. Potentiometric titrations were performed to check the effects of the buffers on compleximetric titrations.