Rh NMR studies of organometallic rhodium(I) derivatives

Organometallic rhodium(I) derivatives have been studied by ¹⁰³Rh NMR. The chemical shift range extends from 609 ppm ([Rh.cp.cod]) to 2714.7 ppm ([Rh.fod.cod]). These results are supported by ¹³C and ³¹P NMR results, and give information about the bonding in these derivatives. Most of the complexes contain the cycloocta-1,5-diene ligand. For these complexes a linear correlation is observed between δRh and δC (olefinic carbons) (27 points, R = 0.960). For the phosphine derivatives a linear correlation is found between δRh and ¹J(RhP) and, also, between δRh and parameters characterizing the basicity of the phosphine ligand. The correlation of δRh with ligand properties has been extended to a wider range of complexes by using the ‘influence parameters’ defined previously (10 points, R = 0.947). The sensitivity of δRh to steric factors is also proved.     

Some new rhodium(I)-iridium(III) complexes with bridging hydride and chloride ligands

[IrH₅(PEt₃)₂] reacts with [(PR₃)₂Rh(μ₂-Cl)₂(PR₃)₂] (PR₃ = PEt₃ or 2 PR₃ = Ph₂PCH₂CH₂PPh₂) to give the hydrido-bridged binuclear species [(PR₃)₂Rh(μ₂-H)(μ₂-Cl)IrH₂(PR₃)₂] which show catalytic activity in alkene hydrogenation.     

N-substituted salicylaldimine complexes of rhodium(III) and related rhodium(III) organometallic derivatives

A series of new Rh^III complexes with N-substituted salicylaldimines have been prepared of the form [RhSBPy₂]PF₆ where SB is a tetradentate N,N′-substituted bis(salicylaldimine) or represents two molecules of a corresponding bidentate derivative. Several of these complexes have been reduced with 0.5% sodium amalgam and the products reacted with CH₃I to yield the organometallic derivatives CH₃RhSBPy.     

Some cationic carbonyl complexes of rhodium(I)

A number of cationic rhodium(I) complexes of the type [Rh(CO)₂(NN)]ClO₄, [Rh(CO)₂L₃]ClO₄ and [Rh(CO)(NN)L₂]ClO₄, where (NN) is 2,2^′-bipyridine or 1,10-phenanthroline and L is a tertiary phosphine or arsine, have been isolated and their structures assigned. The configuration of the complexes ion [Rh(CO)₂L₃]⁺ appears to depend critically on the size of the ligand L.     

Some reactions of π-cyclopentadienylbis(triphenylphosphine) rhodium(I)

Reactions of π-cyclopentadienylbis(triphenylphosphine)rhodium(I) (I) with alkyl halides, olefins, acetylenes, carbon disulfide and elementary sulfur have been investigated. Methyl iodide gives the oxidative-addition product [πC₅H₅ Rh(PPh₃)₂CH₃]I but isopropyl iodide produces the alkyl substituted-cyclopentadienyl complex (π-i-C₃H₇C₅H₄)Rh(PPh₃)I₂. Under a nitrogen atmosphere, olefins and acetylenes give compounds of the composition π-C₅H₅ Rh(PPh₃)(L) (L = CH₂—CHCN, CH₂—CHCO₂CH₃, CH₃O₂—CCOO₂CH₃).In the presence of air, however, complexes of the composition π-C₅H₅Rh(L)₂ (L = CH₂—CHCN, CH₂—CHCO₂CH₃, CH₂—C(CH₃)CN) and π-C₅H₅Rh(L)₃ (L = CH₃O₂ CC—CCO₂ CH₃, PhC—CCO₂ CH₃) are formed. The reaction of carbon disulfide or sulfur with (I) also gives the compounds π-C₅H₅Rh(PPh₃)(L) (L = CS₂, CS₃, S₅).     

Diphenyllead(IV) chloride complexes with benzilthiosemicarbazones. The first bis(thiosemicarbazone) derivatives

Reactions of diphenyllead(IV) chloride with benzil bis(thiosemicarbazone) (L1H6) and benzil bis(4-methyl-3-thiosemicarbazone) (L1Me2H4) afforded the first complexes containing the diphenyllead(IV) moiety with bis(thiosemicarbazone) ligands. The new complexes show diverse structural characteristics depending on the ligand and the working conditions. Complexes [PbPh2Cl(L1H5)].3H2O (1) and [PbPh2Cl(L1Me2H3)] (3) are mononuclear species in which the ligands are partially deprotonated and the lead atom has a C2N2S2Cl environment in a distorted pentagonal bipyramid coordination geometry. Complex [PbPh(L1Me2H2)](2).2H2O (4) was also obtained, which contains two lead atoms in a binuclear structure with a C2N2S3 coordination sphere for each lead atom, since both dideprotonated ligands act as N2S2 chelate and as sulfur bridge. Reaction from L1H6, in the same conditions in which complex 4 was prepared, gave a mixture of products: the lead (II) complex [Pb(L1H4)]2 (2) and [PbPh3Cl]n. Reactions with the cyclic molecules 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]-triazine-3-thione (L2H2OCH3) and 5-methoxy-4-methyl-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]-triazine-3-thione (L2MeHOCH3) were also explored. In all the complexes, the ligands are deprotonated. The complexes [PbPh2(L2)2] (5) and [PbPh2(L2MeOCH3)2] (7) present the same characteristics. The X-ray structure of 5 shows a distorted octahedral geometry around the lead atom, with the ligand molecules acting as NS chelates, but the nitrogen bonded to the metal is different; one of the triazines shows a novel behavior, since the nitrogen atom of the new imine group formed is the one that is bonded to the lead center, being a good example of linkage isomerism. The complex [PbPh2Cl(L2)] (6), which was also isolated, could not be crystallized. All the complexes were characterized by elemental analysis, mass spectrometry, IR and 1H, 13C, and 207Pb NMR spectroscopy and some of them by X-ray diffraction studies.     

Photoelectron spectroscopy of actinide organometallic compounds I. Bis(cyclooctatetraene)actinide(IV) complexes

The He(I) photoelectron spectra of the antinocene species Th(cot)₂ and U(cot)₂ (cot = cyclooctatetraene) have been determined. The 5f metal ionization has been detected at the onset of the uranocene spectrum. The low ionization energy region of both spectra is discussed in terms of simple qualitative molecular orbital scheme.     

The chemistry of hetero-allene and -allylic derivatives with rhodium : I. The reactions of rhodium(I)-hetero-allylic compounds with hetero-allenes; B. Carbon Disulfide

The rhodium(I) complexes Rh[X-C(Z)-Y] (PPh₃)₂, in which [X-C(Z)-Y] represents an uninegative unsaturated heteroallylic bidentate ligand, coordinating via two of the three hetero atoms (X, Y, Z  P, S or N), react at elevated temperature with an excess of the hetero-allene SCS to give the rhodium(I)-thiocarbonyl complexes Rh[X-C(Z)-Z](CS)(PPh₃). In the initial step a first CS₂ molecule is coordinated side-on by one of the CS double bands. Subsequent reactions can be blocked at this stage by addition of pyridine, resulting in RhCl(η²-CS₂)(PPh₃)(py)₂. The formation of the CS complexes occurs in two ways. Either by direct sulfur abstraction from the Rh^I(η²-CS₂) complex by PPh₃ or by a dimerisation of two CS₂ molecules and elimination of a CS moiety, resulting in a Rh^III-thiocarbonyl-trithiocarbonato complex, immediately followed by demolition of the trithiocarbonato-CS^?2₃ fragment, by PPh₃ to SPPh₃ and CS₂.Complexes containing a CS^?2₃ fragment, but no CS moiety, can also be identified by IR measurements. These products may be formed in a sidereaction upon elimination of CS.     

Mechanism of one-electron reactions of copper(I) chloride complexes with chlorohydrocarbons

The reactivity of chlorohydrocarbons with different electron affinities (A _e) and C-Cl bond dissociation energies (E _C-Cl) in the oxidation of copper(I) chloride complexes was studied. The rate of oxidation depends only on A_e. Chain initiation, involving Cu(I), occurs by an electron-transfer mechanism.Translated from Kinetika i Kataliz, Vol. 46, No. 1, 2005, pp. 59–63.Original Russian Text Copyright © 2005 by Kharitonov, Golubeva.     

ESR investigation of the substitution reactions in rhodium(I) complexes with spin-labeled ligands

A number of new spin-labelled Rh^I complexes containing both the 3,6-ditert-butyl-o-benzosemiquinone (3,6-SQ) fragment and n- and π-donor ligands have been prepared. The tetracoordinate derivatives of the composition L₂Rh-(3,6-SQ), where L  CO, P(OPh)₃, L  1/2 1,5-COD and the pentacoordinate complex (PPh₃)₂Rh(3,6-SQ)(CO) were isolated in individual state, the formation of other rhodium compounds was registered by ESR spectroscopy. The presence of an o-benzosemiquinolate ligand in the molecule with the unpaired electron located essentially on this fragment does not significantly influence on the reactivity of the metal ion in most cases; the n- and π-donor ligands exchange reactions studied by ESR confirm this fact. (PPh₃)₂Rh(3,6-SQ) has an abnormal distribution of spin density of the unpaired electron in the molecule, mostly located on the metal atom, this derivative bearing a close analogy to the rhodium(II) (d⁷) complexes.     

Ligating properties of thionitrosoamines: IV. Cationic complexes of rhodium(I), rhodium(III), and ruthenium(II) containing N-thionitrosodimethylamine

The solvento species obtained by treatment of the complexes [Rh(1,5-cyclooctadiene)Cl]₂, [Rh(norbornadiene)Cl]₂, [Rh(CO)₂Cl]₂, C₅H₅Rh(CO)I₂, [C₅Me₅RhCl₂]₂, and [Ru(C₆H₆)Cl₂]₂ with AgPF₆ in acetone or acetonitrile react with a large excess of Me₂NNS to give the compounds [Rh(1,5-C₈H₁₂)-(SNNMe₂)₂]PF₆ (1a), [Rh(C₇H₈)(SNNMe₂)₂]PF₆ (1b), [Rh(CO)₂(SNNMe₂)₂]PF₆ (2), [C₅H₅Rh(SNNMe₂)₃](PF₆)₂ (3), [C₅Me₅Rh(SNNMe₂)₃](PF₆)₂ (4), and [Ru(C₆H₆(SNNMe₂)₃](PF₆) (5). If the thionitroso ligand is not preent in large excess decomposition often occurs. The use of AgClO₄ allows isolation of the perchlorate salts of 1a, 1b, 2, 4, and 5, and the complexes [C₅H₅Rh-(SNNMe₂)₂(ClO₄)ClO₄ (6) and Rh(1,5-C₈H₁₂)(SNNMe₂)(ClO₄) (7). In the H¹ NMR spectra the methyl protons of Me₂NNS are observed as two quadruplets, in the range δ 3.75–4.25 (⁴J(HH) ca. 0.7 Hz) because of restricted rotation around the NN bond. The rhodium(I) complexes (1a, 1b, and 2) reacts with PPh₃ or p-tolylPPh₂ to give labile products, and only [Rh(1,5-C₈H₁₂)(SNNMe₂)(PPh₃)]ClO₄ (8) and [Rh(1,5-C₈H₁₂)(SNNMe₂)(p-tolylPPh₂)]ClO₄ (9) were isolated and characterized.     

Monocarbonyl cationic rhodium(I) complexes

Summary The preparations and characterisation of cationic complexes of the type [Rh(CO)(MeCN)(PR₃)₂]ClO₄, [Rh(CO)L(PR₃)₂]ClO₄ (L=py or 2-MeOpy), [Rh(CO)(L-L)(PR₃)₂]ClO₄ (L-L = bipy or phen) and [Rh(CO)(PR₃)₃]ClO₄ with PR₃ = P(p-YC₆H₄)₃ (Y=Cl, F, Me or MeO) are described.     

Hydrogen transfer reactions catalyzed by neutral rhodium(I) Schiff base complexes

Summary Hydrogen transfer reactions from 2-propanol to acetophenone or cyclohexene are catalyzed by neutral rhodium(I) complexes of the type [Rh(COD)L] and [Rh₂(COD)₂L] (where L and L are Schiff base ligands and COD=cycloocta-1,5-diene). Some dependency of the catalytic activity on the electronic and steric properties of the ligands are discussed.     

On rhodium(III) chloride complexes with N,N-dimethylformamide

A prolonged storage of a solution of RhCl₃·nH₂O in N,N-dimethylformamide (DMF) at room temperature is attended by the consecutive formation of two precipitates, which mainly contain the [(CH₃)₂NH₂][RhCl₅(DMF)] complex (I) and the complex [RhCl₃(DMF)₃] (II) liberates. The addition of PPh₄Cl to an aqueous solution of complex I brings about the precipitation of [PPh₄][RhCl₄(H₂O)₂] (III). Complex II (a mixture of mer-and fac-isomers) can be obtained also by treatment of [RhCl₃(CH₃CN)₃] with DMF. In the course of the latter reaction, the formation of intermediate complex [RhCl₃(CH₃CN)₂(DMF)] (IV) is observed. Complexes I–IV are characterized by elemental analysis; complexes I, II, and IV are characterized by the IR and ¹H and ¹³C NMR spectra. The structures of III and IV are determined by X-ray diffraction analysis.     

Carbonyl complexes of rhodium(I) and rhodium(III) with 2,2′-biquinoline

Novel carbonyl complexes of rhodium(I) and rhodium(III) containing the bidenate nitrogen donor ligand 2,2′-biquinoline (biq) have been prepared; they are of the types RhX(CO)₂ biq and RhX(CO)biq (X = Cl, Br, I). Cationic carbonyl and substituted carbonyl complexes of the types [Rh(CO)₂biq]ClO₄ and [Rh(CO)biqL₂]ClO₄, where L is tertiary phosphine or arsine have also been isolated. In spite of considerable steric crowding around the nitrogen atoms, 2,2′-biquinoline behaves much like 2,2′-bipyridine in forming carbonyl complexes of rhodium.     

Indolylgold(I) derivatives and indole as π-arene ligands in cationic rhodium(I) complexes

The reaction of LAuIn (L = P(C₆H₅)₃, P(2-MeC₆H₄)₃ or P(4-MeC₆H₄)₃; In = indolyl group) with the solvated complexes [(diolefin)Rh(Me₂CO)_x]ClO₄ gives the novel heterometallic complexes [(diolefin)Rh(μ-In)AuL]ClO₄. The mononuclear arene derivatives [(diolefin)Rh(η⁶-HIn)]ClO₄ react with methanolic KOH to give the binuclear complexes [(diolefin)Rh(μ-OMe)]₂, while [(COD)Rh(η⁶-HIn)]ClO₄ reacts with KOH in water/acetone to give the hydroxo-bridged complex [(COD)Rh(μ-OH)]₂.     

Cationic thiocarbonyl complexes of rhodium(I)

The syntheses are described of a range of cationic rhodium(I) thiocarbonyl complexes containing tertiary phosphine, phosphinite, phosphonite and phosphonite ligands.     

on the existence of organometallic palladium(IV) complexes

The reactions of palladium(II) compounds of the type Cl₂PdL₂ with bromobis(pentafluorophenyl)thallium(III) has been reexamined. The reported preparation of the organo palladium(IV) complex Cl₂Pd(C₆F₅)₂(PPh₃)₂ could not be repeated, and instead mixtures of binuclear palladium(II) compounds, Cl₂Pd(C₆F₅)₂L₂, and mononuclear palladium(II) compounds were obtained. The binuclear are transformed into the mononuclear complexes on addition of an excess of ligand L.The chlorine bridging atoms of the binuclear complexes can be replaced by other halogens or pseudohalogens by treatment with salts of the MX type (X = Br, I, SCN).