Photometric titration of vanadium(IV) with 8-hydroxyquinoline-5-sulphonic acid

Vanadium(IV) at concentrations of 10^-2–10^-4 M can be titrated at pH 5–6; the 1:2 metal—ligand complex is formed. Back-titrations with copper(II) solution and reverse titrations are also feasible. Absorbances are measured at 385 nm.     

Photometric titration of iron with ethylenediaminedi(o-hydroxyphenylacetic acid)

Fractional mg quantities of ferric iron in 100 ml of solution can be titrated at PH 3.5 with a solution of ethylenediaminedi(o-hydroxyphenylacetic acid). The end-point is found photo- metrically. Errors are generally under 1%, and a number of metals do not interfere. By scaling down the volume of the solution and the titrant concentration, the titration can be extended to μg quantities of iron, and mg quantities are also accessible by changing to a wave length where the sensitivity is not so great. The titration may be useful in certain applications.     

Spectrophotometric titration of mercury(II) with ethylenedithiodiacetic acid

Summary Mercuric ions may be determined by titration with ethylenedithiodiacetic acid at a wavelength of 260 nm at any pH less than 1. The method is simple, rapid, and selective, and is applicable in solutions of high electrolyte concentration. Mercury(II) can be determined down to 1.5×10^–5 M with a relative standard deviation less than 2%.

---

Zusammenfassung Quecksilber (II) läßt sich mit Äthylendithiodiessigsäure bei 260 nm und pH1 titrieren. Das Verfahren ist einfach, rasch und selektiv. Es läßt sich auch für Lösungen mit hoher Elektrolytkonzentration anwenden. Hg(II)-Konzentrationen über 1,5×10^–5 M sind mit einer relativen Standardabweichung unter 2% bestimmbar.

     

Photometric titration of titanium(III) with iron(III)

An oxidimetric titration of titanium(III) with iron(III) with a photometric end-point is proposed. Acetylacetone was used to obtain an intensely coloured titanium(III) complex; titanium(III) was formed by prereduction with chromium(II) or vanadium(II). Amounts of titanium down to 35 μg were determined with fairly good accuracy and precision. Few common elements interfere.     

聚5-磺基水杨酸修饰电极上对苯二酚的电化学行为

用循环伏安法将 5 磺基水杨酸修饰于玻碳电极表面 ,制备出对对苯二酚具有电催化作用的聚合物膜修饰电极。研究了对苯二酚 (HQ)在该聚合物薄膜修饰电极上的电化学行为。在 0 5mmol/LH2 SO4底液中 ,HQ在该电极上的线性范围为 2 0× 1 0 - 6～ 1 0× 1 0 - 4 mol/L。该修饰电极可将对苯二酚和邻苯二酚(CC)的氧化峰分开约 1 0 5mV     

Photometric titration of small quantities of metals with ethylenediaminetetra-acetic acid

A commercially available photometric titration apparatus has been used for the determination ofAl, Ba, Bi, Ca, Cd, Co, Mg, Mn, Ni and Zn in the 4-20 mug range and of Hg in the 16-32 mug range. Pooled standard deviations (32 determinations) of between 0.09 and 0.15 mug were found for all the metals except Ba (0.20 mug) and Hg (0.44 mug, 24 determinations).     

Polymeric structures in the metal complexes of 5-sulfosalicylic acid: The rubidium(I), caesium(I) and lead(II) analogues

The complexes of 3-carboxy-4-hydroxybenzenesulfonic acid (5-sulfosalicylic acid, H₃SSA) with rubidium(I), caesium(I) and lead(II) have been synthesized and characterized using single-crystal X-ray methods at 130 K. The rubidium(I) complex 1, [Rb₃(H₂SSA)(HSSA)(H₂O)₄]_n, is an unstable hydrate variant of a previously described complex [Rb(H₂SSA)(H₂O)]_n, and comprises three independent and different seven-coordinate metal polyhedra interlinked through oxygen donors of the sulfonate, carboxylate and phenolate groups of the 5-sulfosalicylate ligands (one of which is dianionic, the other monoanionic), and one bridging water, giving a three-dimensional hydrogen-bonded framework polymer structure. The anhydrous caesium(I) complex 2 [Cs(H₂SSA)]_n, which has been previously described in a room-temperature determination, has a three-dimensional framework polymer structure based on an irregular Cs–O₉ repeating unit. Complex 3 with lead(II), [Pb(H₂SSA)₂(H₂O)]_n, forms helical step-polymer ribbon substructures having an irregular Pb–O₇ coordination centre comprising a single monodentate water and six sulfonate-O donors bridging three separate metals. The carboxylic acid and phenol substituent groups of the 5-sulfosalicylate ligand link the ribbons peripherally through hydrogen bonds, giving a three-dimensional layered framework polymer structure.     

Coulometric titration of copper(II) with electro-generated chromium(II)

The current efficiency for the electrogeneration of chromium(II) for use as a coulometric titrant was studied for several supporting electrolytes. With a mercury cathode and a 0.1 M chromic sulfate-0.1 M potassium chloride medium, 0.8 to 2.8 mg of copper (II) in 110 ml of solution can be titrated using potentiometric end-point detection.     

A thermodynamic study of the complexation reaction of beryllium(II), magnesium(II) and calcium(II) with 3-hydroxy-2-naphtoic acid

The thermodynamic stability constants and thermodynamic parameters for the complexation reaction of Be²⁺, Mg²⁺ and Ca²⁺ with 3-hydroxy-2-naphthoic acid have been determined pH metrically in a 70% v/v dioxane-water medium in the presence of potassium nitrate. The study showed the formation 1:1 and 1:2 complexes of Be²⁺, Mg²⁺ and 1:1 complex of Ca²⁺ with 3-hydroxy-2-naphthoic acid. The order of overall stability is Be²⁺>Mg²⁺>Ca²⁺.     

Synthesis,characterization, and pharmacological evaluation of the proton transfer salts of 2-aminobenzothiazole derivatives with 5-sulfosalicylic acid and their Cu(II) complexes

Abstract

Two proton transfer compounds, formed between 2-aminobenzothiazole derivatives (2-aminobenzothiazole (abt) and 2-amino-6-ethoxybenzothiazole (EtOabt)) and 5-sulfosalicylic acid dihydrate (H₃ssa) as parent compounds, (Habt)⁺(H₂ssa)^? (1) and (HEtOabt)⁺(H₂ssa)^? (2) and their Cu(II) complexes (3 and 4, respectively) have been prepared and characterized using spectroscopic techniques. The single crystal X-ray diffraction method has been also applied to 3 and 4. Although 3 has a distorted octahedral form, 4 exhibits a distorted square pyramidal geometry. All compounds, including saline and diclofenac sodium as standards, have been evaluated pharmacologically for their anti-inflammatory and analgesic activities in rats and mice. Parent compounds (abt, EtOabt, and H₃ssa) 3 and 4 show significant anti-inflammatory and analgesic activities as compared with control compounds.     

Thermodynamic stability constants of beryllium(II) and p-substituted N-phenyl benzohydroxamic acid complexes

The thermodynamic stability constants of beryllium(II) complexes of p-substituted N-phenylbenzohydroxamic acids have been determined in 50% v v aqueous dioxan at 35 degrees. The effect of methoxy, methyl, chloro, bromo, and nitro groups as substituents is discussed. There is a linear relationship between log K(1) and pK(a) and the Hammett equation is applicable. The beryllium complexes have been compared with those of Cu, Zn, Ni and Mn.     

The direct spectropolarimetric titration of palladium(II) ion with d-(-)-1,2-propylenediaminetetraacetic acid

A direct spectropolarimetric titration of palladium(II) at 40°C with the optically active ligand D-(—)-1,2-propylenediaminetetraacetic acid (D(—)PDTA) is described. The optical rotation is monitored with a modified photoelectric polarimeter, and both the palladium-D(—)PDTA complex and the titrant serve as optically active indicators. End-points are obtained by extrapolations. The proposed titration is compared with the visual back-titration method.     

Photometric titration of metal ions,based on ultraviolet absorption by a lead(II) complex. I

Summary A method is described for the complexometric determination of alkaline earth metals with EDTA and EGTA by means of photometric end-point indication at 242 nm, using lead(II) as indicator ion. Determinations of 10^–5 M solutions of calcium and barium appeared to be possible with good accuracy.

---

Zusammenfassung Eine komplexometrische Bestimmung von Erdalkalimetallen mit ÄDTA und ÄGTA wurde beschrieben. Die Endpunktindikation wird photometrisch bei 242 nm unter Verwendung vom Blei(II) als Indikatorion durchgeführt. Bestimmungen von 10^–5-m Lösungen von Calcium und Barium sind mit guter Genauigkeit durchführbar.

     

Selective thermometric titration of manganese(II) with edta

The differential thermometric titrations of mixtures of Mn(II) and Zn(II), or Mn(II) and Cd(II), and the selective thermometric titrations of Mn(II) in the presence of larger amounts of Cu(II) or Ni(II) are described. The optimal conditions for these titrations are considered based on the effective enthalpy.     

1H and 13C NMR studies of lanthanide complex with 5-sulfosalicylic acid

In this paper, paramagnetic shifts have been measured for all ¹H and ¹³C nuclei of 5-sulfosalicylic acid (SSA) in the presence of the lanthanide ions in the second half of the series. The ligand forms isostructural complexes with these ions in aqueous solution. The separation of LISs was carried out by the use of the Reilley method and the calculated dipolar shifts were used to simulate the coordination structure of the complex. The result reveals that SSA is coordinated to lanthanide ion via two oxygens, one from the carboxylic group and the other from the phenolic group with Ln–O bond lengths equal to 2.47 Å. The lanthanide ion lies on the benzene plane and the carboxylic group is twisted 20° from the benzene ring. Of all the nuclei examined, those in the six-membered chelate ring experience significant dipolar interactions and contact interactions. Small |G/A| ratios were obtained for two protons five bonds away from the central lanthanide ion, which shows that the number of bonds alone cannot be used as a criterion for neglecting contact shifts in aromatic ligand.