N,N-dihalophosphoramides-XV: The addition of diethyl N,N-dichlorophosphoroamidate (DCPA) to conjugated 1,3-dienes

The addition of DCPA to several conjugated 1,3-dienes has been studied. The reaction was found to proceed in dichloromethane and was spontaneously or photolytically initiated depending on the structure of the dienes. N-chloro adducts, formed upon addition, could be reduced “in situ” with sodium sulphite solution to give the corresponding diethyl N-(chloroalkenyl)posphoroamidates. Addition of DCPA to terminal double bond 1,3-dienes (butadiene, isoprene and 2,3-dimethyl-1,3-butadiene) leads regiospecifically to (E)-1,4-adducts. Similarly, 1,4-addition is also observed for 1,3-cyclohexadiene. Reaction of DCPA with nonterminal double bond 1,3-dienes (trans-piperylene, 4-methyl-1,3-pentadiene, 2,5-dimethyl-2,4-hexadiene and 1,4-diphenyl-1,3-butadiene) usually affords a mixture of adducts. Spectral data and chemical transformations pertinent to the proof of structure of DCPA addition products are presented. A possible mechanism for the addition is discussed.     

Reactions of dodecacarbonyltriosmium with dienic ligands

Dodecacabonyltriosmium reacts with diene ligands (D) such as 2,4-trans, trans- and 2,4-cis, trans-hexadiene and 1,6- and 1,5-heptadiene to give H₂Os₃D(CO)₉, H₄Os₄(CO)₁₂ and two isomers of molecular formula HOs₃-(D  H)(CO)₉ in addition to Os₂(D  2H)(CO)₆ and OsD(CO)₃. The structures of the trimetal complexes show that dehydrogenation, isomerization and rearrangement of the organic substrates occur before the coordination to the metal cluster. 2,3-Dimethyl-1,3-butadiene and dodecacabonyltriosmium give only the well known bi- and mono-metal complexes. The results are compared with those obtained in the reactions of the some organic molecules with dodecacabonyltriruthenium.     

Mercury(II) iodide coordination polymers generated from polyimine ligands

A series of new HgI₂ organic polymeric complexes, [Hg₂(L1)I₄]_n (1), [Hg(L2)I₂]_n (2), [Hg(L3)I₂]_n (3), [Hg₂(L4)I₄]_n (4), [Hg(L5)I₂]_n (5), [Hg(L6)I₃](HL6) (6) {L1 = 1,4-bis(2-pyridyl)-2,3-diaza-1,3-butadiene, L2 = 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene, L3 = 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene, L4 = 2,5-bis(2-pyridyl)-3,4-diaza-2,4-hexadiene, L5 = 2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene and L6 = 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene} was prepared from reactions of mercury(II) iodide with six organic nitrogen donor-based ligands under thermal gradient conditions using the branched tube method. All these compounds were structurally characterized by single-crystal X-ray diffraction. The HgI₂ coordination polymers obtained with the ligands L2, L3 and L5 show one-dimensional zig-zag motifs and in these compounds the HgI₂ units are connected to each other by the ligands L2, L3 and L5 through the pyridyl nitrogen atoms. The L1 and L4 ligands in the compounds 1 and 4 act as both a chelating and bridging group. In the compound 6 the ligand L6 acts as a monodentate ligand, resulting form a discrete compound. The thermal stabilities of compounds 1–6 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

Heptacarbonyl-μ-(2,5:2–5-η-2,4-hexadien-2,5-diyl)dimangan,synthese und molekülstruktur eines zweikernigen manganacyclopentadien-komplexes

The photochemical reaction of Mn₂(CO)₁₀ with cis-,trans-2,4-hexadiene yields three tetracarbonyl-η³-enyl-manganese complexes with E-2,4-hexadien-1-yl, EE-3-hexen-2-yl EZ-3-hexen-2-yl ligands. In an unexpected side-reaction, heptacarbonyl-μ-(2,5:2–5-η-2,4-hexadiene-2,5-diyl)dimanganese is formed. This novel dinuclear manganacyclopentadiene complex was characterized by C and H elemental analysis, IR and ¹H NMR spectroscopy, and by X-ray structure analysis.     

Synthesis and polymerization of optically active trans-(R)(–)-5-phenyl-1,3-hexadiene and trans-(R)(–)-6-phenyl-1,3-heptadiene

The monomers trans-(R)(–)-5-phenyl-1,3-hexadiene (I) and trans-(R)(–)-6-phenyl-1,3-heptadiene (II) were prepared by dehydration of (R)(–)-3-acetoxy-5-phenyl-1-hexene and (R)(–)-3-acetoxy-6-phenyl-1-heptene, respectively. Monomers I and II were polymerized in heptane with three catalyst systems: γ-TiCl₃–Al(i-Bu)₃, VCl₃–Alet₃, and nBuLi. Polymers of identical structures were obtained with all three catalysts; according to infrared and NMR spectra, only the 1,4 structure was present. Acetone-insoluble fractions of poly-I and poly-II have higher optical rotations than the corresponding monomers ([M]_D of poly-I, -46.45°, of monomer I, -28.6°: [M]_D of poly-II, -46.8°, of monomer II, -32.55°). There is no difference in the rotation of poly-I and poly-II.     

Cationic polymerization of dimethyl-1,3-butadienes

The cationic polymerizations of dimethyl-1,3-butadienes with various catalysts in methylene chloride and toluene have been investigated. The activity of catalysts decreased in the order WCl₆ > AcClO₄ > SnCl₄·TCA > BF₃OEt₂. The homopolymerization rate of dimethyl-1,3-butadienes with WCl₆, AcClO₄, and SnCl₄·TCA decreased in the order 1,3-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,4-hexadiene. The polymers prepared with WCl₆, SnCl₄.TCA, and BF₃OEt₂ were rubberlike polymers or white powders, whereas those prepared with AcClO₄ were oily oligomers. The 1,4-propagation increased in the order 1,2-dimethyl-1,3-butadiene < 1,3-dimethyl-1,3-butadiene < 2,3-dimethyl-1,3-butadiene < 2,4-hexadiene. This order may indicate that the steric effect of methyl group determine primarily the microstructure of the polymer. The relative reactivity of dimethyl-1,3-butadienes toward a styryl cation decreased in the order 1,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 2,4-hexadiene. This order may be explained in terms of the stability of the resulting allylic cation.     

Synthesis and characterization of polymers of 1,4-hexadienes

The homopolymerization of trans-1,4-hexadiene, cis-1,4-hexadiene, and 5-methyl-1,4-hexadiene was investigated with a variety of catalysts. During polymerization, 1,4-hexadienes undergo concurrent isomerization reactions. The nature and extent of isomerization products are influenced by the monomer structure and polymerization conditions. Nuclear magnetic resonance (NMR) and infrared (IR) data show that poly(trans-1,4-hexadiene) and poly(cis-1,4-hexadiene) prepared with a Et₃Al/α-TiCl₃/hexamethylphosphoric triamide catalyst system consist mainly of 1,2-polymerization units arranged in a regular head-to-tail sequence. A 300-MHz proton NMR spectrum shows that the trans-hexadiene polymer is isotactic; it also may be the case for the cis-hexadiene polymer. These polymers are the first examples of uncrosslinked ozone-resistant rubbers containing pendant unsaturation on alternating carbon atoms of the saturated carbon-carbon backbone. Polymerization of the 1,4-hexadienes was also studied with VOCl₃- and β-TiCl₃-based catalysts. Microstructures of the resulting polymers are quite complicated due to significant loss of unsaturation, in contrast to those obtained with the α-TiCl₃-based catalyst. In agreement with the literature, there was no discernible monomer isomerization with the VOCl₃ catalyst system.     

Thermal decomposition of trans-chloro(2-allylphenyl)bis(triethylphospine)nickel(II)

Thermolysis of trans-chloro(2-allylphenyl)bis(triethylphosphine)nickel(II), I, in tetrachloroethylene has afforded indene as the major hydrocarbon product along with lesser amounts of allylbenzene and trans-β-methylstyrene. Organonickel products were trans-chloro(trichlorovinyl)bis(triethylphosphine)nickel(II), II, chloro[2-(trans-propenyl)phenyl]bis(triethylphosphine)nickel(II), III, and trans-dichlorobis(triethylphosphine)nickel(II). Compound III was the major product from thermolysis of I in benzene. Chloro[2-(cis-propenyl)phenyl]bis(triethylphosphine)nickel(II), IV, and III could be synthesized independently by treatment of chloro-2-(cis-propenyl)benzene and chloro-2-(trans-propenyl)benzene, respectively, with nickel acetylacetonate and triethylaluminium in the presence of triethylphosphine. Thermolysis of I in benzene containing allylbenzene led to the formation of trans-β-methylstyrene. The thermolysis of I in benzene in the presence of cis-1,4-hexadiene caused the skeletal rearrangement of the diene to trans-2-methyl-1,3-pentadiene. A catalyst derived from ethylenebis(triphenylphosphine)nickel(0) and hydrogen chloride isomerized allylbenzene to trans-β-methylstyrene.     

rac-[CH2(3-tert-butyl-1-indenyl)2]ZrCl2/MAO in the Copolymerization of Olefins and Dienes

Olefin-diene copolymerizations in the presence of C₂ symmetric zirconocene rac-[CH₂(3-tert-butyl-1-indenyl)₂]ZrCl₂/MAO catalytic system have been reported and rationalized by experimental and molecular modeling studies. Ethene gives 1,2-cyclopropane and 1,2-cyclopentane, 1,3-cyclobutane, and 1,3-cyclopentane units in copolymerization with 1,3-butadiene, 1,4-pentadiene, and 1,5-hexadiene, respectively. Propene-1,3-butadiene copolymerizations lead to 1,2 and 1,4 butadiene units and to a low amount of 1,2-cyclopropane units.     

Synthesis and crystal structure of an unusual mixed crystal containing an oxorhenium(V) and imidorhenium(V) complex

An unusual mixed crystal of a square-pyramidal oxorhenium(V), [ReOCl(Hdua)], and an octahedral imidorhenium(V) complex, [Re(dua)Cl₂(PPh₃)], was prepared from the reaction of trans-[ReOCl₃(PPh₃)₂]_and (6Z)-6-(2-aminobenzylideneamino)- 5-amino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione (H₃dua) in ethanol. Characterization was performed by single crystal X-ray structure determination and IR spectroscopy. The chelate Hdua is coordinated as a tridentate diamido-imine, and dua is chelated as an imido-imino-amide.     

Syntheses and characterization of different zinc(II) oxide nano-structures from direct thermal decomposition of 1D coordination polymers

Three zinc(II) nitrite coordination polymers, [Zn(4-bpdb)(NO₂)₂]_n (1), {[Zn(3-bpdb)(NO₂)]·0.5H₂O}_n (2) and [Zn(3-bpdh)(NO₂)₂]_n (3), 4-bpdb = 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene, 3-bpdb = 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene and 3-bpdh = 2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene} were prepared and characterized by elemental analyses and IR spectroscopy. Compound 3 was structurally characterized by single-crystal X-ray diffraction and is one-dimensional polymer with coordination environments of distorted octahedral, ZnN₂O₄. The thermal stabilities of compounds 1–3 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). Direct calcination of the compounds 1–3 at 600 °C under air atmospheres yields different morphologies of nano-sized ZnO.     

Normal coordinate analyses of 2,4-hexadienes

Measurement and assignment of the i.r. and Raman spectra of trans,trans- and cis,trans-2,4-hexadienes were carried out. The normal coordinate analyses of these two isomers were done to obtain a force field transferable to 1,4-diphenyl-trans,trans-1,3-butadiene and trans- and cis-polyacetylenes.     

Synthesis of conjugated (1E,3E)- and (1Z,3Z)-1,4-di(n-pyridyl) (or n-quinolyl)-1,3-butadienes from n-(2′-chloroethenyl)pyridine (or quinoline)

The homocoupling reaction between the conjugated n-(2-chloroethenyl)pyridine; n, 2-, 3- and 4- (or quinoline; n, 2- and 4-) mediated by zero-valent nickel complexes at room temperature affords to the corresponding 1,4-diaryl-1,3-butadiene, always as the 1E,3E stereoisomer. The yield in 1,4-diaryl-1,3-butadiene increases with the nickel catalyst and hence, the active zero-valent nickel catalyst is not regenerated during the homocoupling reaction.The stereospecific synthesis of (1Z,3Z)-1,4-di(4′-pyridyl)-1,3-butadiene stereoisomer was efficiently carried out by partial hydrogenation of the appropriate 1,4-di(4′-pyridyl)-1,3-butadiyne.     

Synthesis and structure of 1,3-bis(hydroxysilyl)-2,4-dimethyl-2,4-diphenylcyclodisilazane

Trans-silylation reactions of (Me₃Si)₂NH with PhRSiCl₂ (R = Me, Ph) gave HN(SiMePhCl)₂ (1) or ClMePhSiNHSiPh₂Cl (2). The treatment of 1,3-dichlorodisilazane (1 or 2) with an equimolar amount of n-BuLi led to the formation of 1,3-bis(chloro-silyl)-2,4-dimethyl-2,4-diphenylcyclodisilazane (ClSiMePh)₂(NSiMePh)₂ (3) or (ClSiPh₂)₂(NSiMePh)₂ (4), which was allowed to hydrolyze to form 1,3-bis(hydroxysilyl)-2,4-dimethyl-2,4-diphenylcyclodisilazane (HOSiMePh)₂(NSiMePh)₂ (5) or (HOSiPh₂)₂(NSiMePh)₂ (6), respectively. The cyclodisilazane monomers were characterized by elemental analysis, NMR and IR spectroscopy. Compound 3 was obtained as a 4:6 cis/trans mixture while 4 adopted trans-structure considering the hindrance of pendent groups. In addition, the molecular structures of trans-5 and trans-6 were determined by X-ray crystallographic analysis and discussed in detail.     

Halogen-Bond Mediated [2+2] Photodimerizations: À la Carte Access to Unsymmetrical Cyclobutanes in the Solid State

The ditopic halogen-bond (X-bond) donors 1,2-, 1,3-, and 1,4-diiodotetrafluorobenzene (1,2-, 1,3-, and 1,4-di-I-tFb, respectively) form binary cocrystals with the unsymmetrical ditopic X-bond acceptor trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (2,4-bpe). The components of each cocrystal (1,2-di-I-tFb)·(2,4-bpe), (1,3-di-I-tFb)·(2,4-bpe), and (1,4-di-I-tFb)·(2,4-bpe) assemble via N···I X-bonds. For (1,2-di-I-tFb)·(2,4-bpe) and (1,3-di-I-tFb)·(2,4-bpe), the X-bond donor supports the C=C bonds of 2,4-bpe to undergo a topochemical [2+2] photodimerization in the solid state: UV-irradiation of each solid resulted in stereospecific, regiospecific, and quantitative photodimerization of 2,4-bpe to the corresponding head-to-tail (ht) or head-to-head (hh) cyclobutane photoproduct, respectively.     

Reactions of allylic compounds such as allyl alcohols,allyl ethers,and allylamines using trans-Mo(N2)2(Ph2PCH2CH2PPh2)2

Double-bond migration of allylic alcohols and allylic alkyl ethers was catalytically effected with trans-Mo(N₂)₂(dpe)₂(dpe = Ph₂PCH₂CH₂PPh₂). Decarbonylation occurred simultaneously in the case of allyl alcohol. Diallyl ether and allyl phenol ether gave the fragmentation products presumably through initial oxidative addition of the allylO bond. Allylamine was converted to N-propylideneallylamine and NH₃. N,N-Dimethylallylamine was isomerized to N-trans-propenyldimethylamine, which was further transformed into 4-dimethylamino-1,3-hexadiene and dimethylamine on addition of oxygen. The catalytic allylation of methyl acetoacetate with allylic ethers and amines was achieved by use of trans-Mo(N₂)₂(dpe)₂.     

Cationic (fluoromesityl)palladium(II) complexes

Halide abstraction from [Pd(μ-Cl)(Fmes)(NCMe)]₂ (Fmes = 2,4,6-tris(trifluoromethyl)phenyl or nonafluoromesityl) with TlBF₄ in CH₂Cl₂/MeCN gives [Pd(Fmes)(NCMe)₃]BF₄, which reacts with monodentate ligands to give the monosubstituted products trans-[Pd(Fmes)L(NCMe)₂]BF₄ (L = PPh₃, P(o-Tol)₃, 3,5-lut, 2,4-lut, 2,6-lut; lut = dimethylpyridine), the disubstituted products trans-[Pd(Fmes)(NCMe)(PPh₃)₂]BF₄, cis-[Pd(Fmes)(3,5-lut)₂(NCMe)]BF₄, or the trisubstituted products [Pd(Fmes)L₃]BF₄ (L = CN^tBu, PHPh₂, 3,5-lut, 2,4-lut). Similar reactions using bidentate chelating ligands give [Pd(Fmes)(L-L)(NCMe)]BF₄ (L-L = bipy, tmeda, dppe, OPPhPy₂-N,N′, (OH)(CH₃)CPy₂-N,N′). The complexes trans-[Pd(Fmes)L₂(NCMe)]BF₄ (L = PPh₃, tht) (tht = tetrahydrothiophene) and [Pd(Fmes)(L-L)(NCMe)]BF₄ (L-L = bipy, tmeda) were obtained by halide extraction with TlBF₄ in CH₂Cl₂/MeCN from the corresponding neutral halogeno complexes trans-[Pd(Fmes)ClL₂] or [Pd(Fmes)Cl(L-L)]. The aqua complex trans-[Pd(Fmes)(OH₂)(tht)₂]BF₄ was isolated from the corresponding acetonitrile complex. Overall, the experimental results on these substitution reactions involving bulky ligands suggest that thermodynamic and kinetic steric effects can prevail affording products or intermediates different from those expected on purely electronic considerations. Thus,water, whether added on purpose or adventitious in the solvent, frequently replaces in part other better donor ligands, suggesting that the smaller congestion with water compensates for the smaller M-OH₂ bond energy.     

Singlet oxygenation of 1,2-poly(1,4-hexadiene)s

The microstructural changes that occur in cis and trans forms of 1,2-poly(1,4-hexadiene) during methylene blue-photosensitized oxidation were examined by infrared (IR) and ¹³C-NMR spec-troscopy. The singlet oxygenation of these polymers yielded the expected allylic hydroperoxides accompanied by double bond shifts to new vinyl and trans-vinylene double bonds. The photosensitized oxidation exhibited zero-order kinetics; the relative rates for the cis- and trans-1,2-poly(1,4-hexadiene)s were approximately 3.8:1.0.     

Novel sequence of two base-catalyzed 1,3 proton shifts and [1,2] Wittig rearrangement in the synthesis of 2,4-bis-(trifluoromethyl)-6-phenylpyridine

The reaction of 1,1,1,5,5,5-hexafluoro-2,4-pentanedione with (R)-phenylglycinol was found to proceed via intermediate formation of (R, 4E, 6Z)-5,7-bis-(trifluoromethyl)-2,3-dihydro-3-phenyl-1,4-oxazepine which further underwent a base-catalyzed 1,3-proton shift reaction followed by [1,2] Wittig rearrangement giving rise to 2,4-bis-(trifluoromethyl)-6-phenylpyridine.     

Assignments of the vibrational spectra of 2,5-dimethyl-2,4-hexadiene, 4-methyl-1,3-pentadiene and (E)-2-methyl-1,3-pentadiene. Effect of the terminal and lateral methyl groups

The complete assignment of the vibrational spectra of 2,5-dimethyl-2,4-hexadiene, 4-methyl-1,3-pentadiene and (E)-2-methyl-1,3-pentadiene was obtained from a comparative analysis of their i.r. and Raman spectra (solid, liquid and gas) in the range 3200-50 cm⁻¹. It is shown that particular vibrational motions strongly interact to give rise to very characteristic modes depending on the site of methyl substitution. The comparison of our results with those of analogous shorter and larger polyenes and polyenals allows us to discuss the various local coupled motions characteristic of unsubstituted (CHCH CH)CH and methyl substituted (CHC(CH₃)CH), ((CH₃)₂CCH) or (CH₃CHCH) fragments in polyenic chains.