Atomic-absorption spectrometric determination of silver,bismuth and cadmium in sulfide ores by direct atomization from the solid state

Atomic absorption spectrometric determinations of silver, bismuth and cadmium in the Canadian SU-1 and the Nordic ASK reference sulfide ores and in a series of Norwegian sulfide ores of technical importance, were carried out by atomizing the elements directly from the solid state. Atomizations were made in a high-frequency induction-heated graphite furnace. For comparison purposes, samples were also decomposed, and analyses made by atomizing sample solutions in the furnace and in the flame.     

The determination of zinc,cadmium, lead and copper in human hair by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode after nitrate fusion

Samples of hair are digested with nitric acid and fused with alkali metal nitrates, prior to the determination of Zn, Cd, Pb and Cu by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode. Recoveries from spiked samples range from 91 to 101%. Relative standard deviations vary from 2.6 to 13%, depending on the metal and sample source. Some causes of poor reproducibility are discussed.     

Direct atomic absorption spectrometry determination of tin, lead, cadmium and zinc in high-purity graphite with flame furnace atomizer

This work described methodology of Sn, Pb, Cd and Zn impurities determination in high-purity graphite at direct atomic absorption spectrometry (AAS) with flame furnace (FF) atomizer. It was evidence that quality of AAS measurements are depended from sample amount, its homogeneity, particle size, as well as calibration procedure and operation parameters of FF atomizer. Prior to analysis the method has been developed and optimized with respect to the furnace heating temperature and flame composition of FF atomizer. Conditions of absorption peak areas (Q_A) formation to each element were studied on the basis of contribution into its value some of individual parameters of analytes, including mass-transporting process from increasing mass of graphite samples into gas phase. Because particle size and homogeneous distribution of analyte in powdered materials has an enormous influence on accuracy and precision of measurement results, graphite as well as appropriate series of powdered reference standards was previously ground and investigated. Graphite samples to be analyzed and standard reference materials with mass from 0.025 to 0.200 g was previously briquetted as pellet and insert on corresponding hole in furnace. The characteristic mass (g₀) of Sn, Pb, Cd and Zn were 0.35, 0.1, 0.008 and 0.025 ng, respectively, and relative standard deviation (S_r) not more than 20%.     

石墨炉原子吸收法快速测定血液中铅和镉

建立了快速测定血液中铅和镉的石墨炉原子吸收光谱法。使用5%硝酸溶液对样品进行脱蛋白处理,然后在旋涡混合器上振摇,离心后取上清液上石墨炉原子吸收进行测定。 结果表明,Pb、Cd工作曲线线性关系良好,相关系数均大于0.9994;方法检出限分别为4.32μg/L和0.27μg/L;Pb的回收率为91.60%～97.31%,镉的回收率为97.04%～98.86%;Pb测定的RSD（n=7）为2.35%,Cd测定的RSD（n=7）为1.53%。冻干牛血铅、镉标准物质GBW09139k和GBW09140k的测定值与参考值吻合。该方法快速准确,精密度、准确度、检出限等测定结果令人满意。可以作为日常血铅、血镉的检测的方法。     

Determination of cadmium,zinc, and lead by non-dispersive atomic fluorescence spectrometry with a new graphite furnace atomizer

A new graphite furnace atomizer has been developed and applied to the determination of cadmium, zinc, and lead by non-dispersive atomic fluorescence spectrometry. A solar-blind photomultiplier, a lock-in amplifier, and microwave-excited electrodeless discharge lamps are used. The detection limits for cadmium, zinc, and lead in the non-dispersive atomic fluorescence mode are 1·10^?13g, 2·10^?13g, and 2·10^?11g, respectively, which are 20-, 10-, and 2-fold better than those in the atomic absorption mode. The analytical working curves are linear over about three decades of concentration from the detection limits.     

Atomic absorption spectrometric determination of cadmium and lead in dental material by atomization directly from the solid state

The direct-atomization technique of atomic absorption spectrometry was applied to the determination of cadmium and lead in 14 whole erupted or unerupted human teeth. Pulverized samples of 0.5–3 mg were dried, ashed and atomized in a graphite furnace; hydroxyapatite was used as the solid standard. The method is simple, rapid and sensitive, and no reagents are added to the samples.     

Direct determination of lead in bovine liver by solid sampling with graphite furnace atomic absorption spectrometry—a comparison of tube wall atomization, platform atomization and probe atomization

A comparative study of three atomization techniques is presented: tube wall atomization, platform atomization and probe atomization, in graphite furnace atomic absorption spectrometry for direct determination of lead in bovine liver. Also presented is the effect of oxygen ashing on the lead atomic absorption signal and on the background absorption due to the organic matrix of bovine liver. Study of the lead atomic absorption pulses given by the three atomization techniques using a detection system having a short time constant relative to the atomization and the residence time of lead from Bovine Liver, SRM No. 1577, has provided a new insight into the atomization processes involved in the techniques. The importance of isothermal atomization in reducing or eliminating matrix interferences and the role of oxygen gas in the ashing cycle are presented and discussed.     

Simultaneous determination of tin and lead by a.c. anodic stripping voltammetry at a hanging mercury drop electrode sensitized by cetyltrimethylammoniu

The influence of cetyltrimethylammonium bromide (CTAB) on the simultaneous determination of tin(IV) and lead(II) by anodic stripping voltammetry at a hanging mercury drop electrode (HMDE) in a 0.1 M hydrochloric acid—0.1 M oxalic acid medium was studied using d.c. and a.c. stripping. In the presence of CTAB, tin and lead show voltammetric peaks separated by 100 mV, the sensitivity depending on the concentration of CTAB. The best conditions for the simultaneous determination of both elements (2 × 10^-3 M) were found. A method is proposed for the determination of tin in the presence of lead and three procedures are given for the determination of lead in the presence of tin.     

The determination of cadmium in environmental samples by slurry atomization graphite furnace atomic absorption spectrophotometry using platforms and matrix modification

The conditions which allow the accurate and precise determination of cadmium in environmental samples using direct solid introduction and electrothermal atomization atomic absorption spectrometry have been investigated. Cadmium was successfully determined in three certified reference materials (an aquatic plant, olive leaves, and mussels). Utilization of platform atomization and a 0.5% solution of ammonium phosphate as matrix modifier eliminated matrix interference effects. Excellent agreement was obtained with the certified values, with precision equivalent to that found by conventional acid digestion procedures.     

Adsorptive stripping voltammetric determination of dimenhydrinate at a hanging mercury drop electrode

Dimenhydrinate exhibits a single adsorptive stripping peak at a hanging mercury drop electrode after accumulation at 0.0V vs Ag/AgCl electrode at pH 3.8 (acetate buffer). The addition of trace amounts of copper ions enhanced the dimenhydrinate peak and its height depends on the concentration of each dimenhydrinate and Cu²⁺. The adsorptive stripping response was evaluated with respect to accumulation time and potential, concentration dependence, electrolyte, the presence of other purines, surfactants and other metal ions, and some variables. The calibration graph for dimenhydrinate determination is linear over the range 2.0×10^–8–2.0×10^–7 M (pre-concentration for 60s). The correlation factor is found to be 0.985 and RSD is 3.2% at 1.0×10^–7 M. Detection limit is 1.0×10^–8 M after 5 min accumulation. The determination of dimenhydrinate in pharmaceutical formulations by the proposed method is also reported.     

Cadmium,copper, lead,and zinc determination in precipitation: A comparison of inductively coupled plasma atomic emission spectrometry and graphite furnace atomization atomic absorption spectrometry

Selected trace element analysis for cadmium, copper, lead, and zinc in precipitation samples by inductively coupled plasma atomic emission Spectrometry (ICP) and by atomic absorption spectrometry with graphite furnace atomization (AAGF) have been evaluated. This task was conducted in conjunction with a longterm study of precipitation chemistry at high altitude sites located in remote areas of the southwestern United States. Coefficients of variation and recovery values were determined for a standard reference water sample for all metals examined for both techniques. At concentration levels less than 10 micrograms per liter AAGF analyses exhibited better precision and accuracy than ICP. Both methods appear to offer the potential for cost-effective analysis of trace metal ions in precipitation.     

Determination of cadmium in urine specimens by graphite furnace atomic absorption spectrometry using a fast atomization program

A simple, fast, and reliable method was developed for the determination of cadmium in urine specimens by graphite furnace atomic absorption spectrometry (GFAAS). The method involved dilution (1:1) of the specimens with a 4.0% HNO₃, direct injection of a 10 μl aliquot of the corresponding solution into a hot transversely-heated graphite atomizer (110 °C), and application of a fast atomization program (42 s) in which the conventional dry-pyrolysis sequence was substituted by a high-temperature (300 °C) drying step. The effect of the injection temperature (A), injection rate (B), pyrolysis’ ramp (C) and hold (D) times over the analyte’s integrated absorbance, peak-shape and repeatability of the measurements was evaluated by means of a 2^4-1 fractional factorial design. All those individual variables, as well as their first-order interactions (AB-, AC- and AD-type interactions) were found to exert a statistically significant effect (P<0.05). The lack of a chemical modifier other than the nitric acid itself benefited the overall methodology by allowing low-temperature atomization (1200 °C), enhanced atomic and background signals separation, and reduced blank values. A detection limit (3s, n=20) of 0.06 μg l⁻¹ Cd, corresponding to 0.12 μg l⁻¹ Cd in the urine specimen, and a characteristic mass of 1.78 pg/0.0044 s were obtained under the optimized conditions. The standard calibration technique (SCT) was used for quantitation. The successful determination of cadmium in Seronorm™ Trace Elements Urine Batch No. 115 (Nycomed Pharma AS) and in four urine specimens from volunteer donors (recoveries: 91.3-103.4%) attested to the robustness of the proposed method.     

Low-level determination of silicon in steels by anodic stripping voltammetry on a hanging mercury drop electrode

The sensitive differential pulse anodic stripping voltammetry (DPASV) proposed originally by Ishiyama et al. (2001) has been revised and improved to allow the accurate measurement of silicon on a hanging mercury drop electrode (HMDE) instead of a glassy carbon electrode. We assessed the rate of formation of the partially reduced β-silicododecamolybdate and found that metallic mercury promotes the reaction in the presence of a large concentration of Fe³⁺. The scope of the method has been broadened by carrying out the measurements in the presence of a constant amount of Fe³⁺. The limit of detection (LOD) of the method described in the present paper is 100 μg Si g⁻¹ of steel, with a relative precision ranging from 5% to 12%. It can be further enhanced to 700 ng Si g⁻¹ of steel provided the weight of the sample, the dilution factors, the duration of the electrolysis and the ballast of iron are adequately revised. The tolerance to several interfering species has been examined, especially regarding Al³⁺, Cr³⁺ and Cr VI species. The method was validated using four low-alloy ferritic steels certified by the National Institute of Standards and Technology (NIST). Its application to nickel base alloys as well as to less complicated matrixes is straightforward. It has also been successfully applied to the determination of free silicon into silicon carbide nano-powder.     

Sensitive detection of cyclophosphamide using DNA-modified carbon paste, pencil graphite and hanging mercury drop electrodes

The interaction of cyclophosphamide (CP) with calf thymus double-stranded DNA (dsDNA) and thermally denatured single-stranded DNA (ssDNA) immobilized at the carbon paste (CPE) and pencil graphite electrodes (PGE), was studied electrochemically based on oxidation signals of guanine and adenine using differential pulse voltammetry (DPV).As a result of the interaction of CP with DNA, the voltammetric signals of guanine and adenine increased in the case of dsDNA while a slight increase was observed in ssDNA. The effect of experimental parameters such as the interaction time between CP and DNA forms and the concentration of CP, were studied using DPV with CPE and PGE. Additionally, reproducibility and detection limits were determined using both electrodes. A comparison of the analytical performance between CPE and PGE was done. Our results showed that these two different DNA biosensors could be used for the sensitive, rapid and cost effective detection of CP itself as well as of CP-DNA interaction.Furthermore, the interaction of CP with dsDNA and ssDNA was studied in solution and at the electrode surface by means of alternating current voltammetry (ACV) in 0.3 M NaCl and 50 mM sodium phosphate buffer (pH 8.5) supporting electrolyte, using a hanging mercury drop electrode (HMDE) as working electrode.The conclusions of this study were mainly based on tensammetric peaks I (at −1.183 V) and II (−1.419 V) of DNA. This study involved the interaction of CP with surface-confined and solution phase DNA where experimental parameters, such as the concentration of CP and the interaction time, were studied. By increasing the concentration of CP, an increase of peak II was observed in both ds and ssDNA, while an increase of peak I was observed only in the case of dsDNA. An overall conclusion of the study using HMDE was that the interaction of CP with surface-confined DNA significantly differed from that with solution phase DNA. The increase of peaks I and II was lower in the case of interaction of CP with surface-confined DNA, probably due to steric positioning of DNA at the electrode surface.     

石墨炉原子吸收光谱法测定中药口服液中的铬铅镉

利用石墨炉原子吸收光谱法测定,采用常温消解和密闭微波消解等方式处理口服液样品,并进行比较。结果表明,采用HNO3 HClO4 H2O2作为消解试剂用常温消解方式进行消解后,可不加基体改进剂直接进行测定,在此基础上研究了石墨炉原子吸收测定的最佳条件。应用这种方法测定了双黄连、清开灵、生脉饮和抗病毒口服液中痕量镉、铬和铅,RSD小于5．0％,回收率在83．4％～113％。     

The atomic absorption determination of zinc with a graphite furnace

The use of a heated graphite furnace has been evaluated for the atomic absorption determination of zinc. Interferences were found to occur with most elements when present in large amounts; solvent extraction procedures have been investigated to avoid such effects. Results are reported for the solvent extraction and determination of zinc in the range 0.002–1 p.p.m.     

The atomic absorption determination of antimony,arsenic, bismuth, cadmium, lead, and tin in iron, copper,and zinc alloys with the graphite furnace

Antimony, arsenic, bismuth, cadmium, lead, and tin can be determined in metallurgical samples by flame atomic absorption spectrometry at levels of 0.005 wt%, but lower concentrations frequently necessitate preconcentration. The graphite furnace allows determination of these elements at concentrations 1–2 orders of magnitude lower than is possible with flame techniques. All six elements have detection limits at or below 1μg g⁻¹ in a variety of alloys. Calibration for antimony and load was done with standards containing the principal component of the alloy as a synthetic matrix. Bismuth, cadmium, and tin could be determined accurately only by the standard addition method. Arsenic could be determined in iron alloys with synthetic standards, but standard additions were required for copper alloys.     

Cloud point extraction for the determination of cadmium and lead in biological samples by graphite furnace atomic absorption spectrometry

The phase-separation phenomenon of non-ionic surfactants occurring in aqueous solution was used for the extraction of Cd and Pb from digested biological samples. After complexation with O,O-diethyldithiophosphate (DDTP) in hydrochloric acid medium, the analytes are quantitatively extracted to the phase rich in the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114) after centrifugation. Methanol acidified with 0.1 mol L⁻¹ HNO₃ was added to the surfactant-rich phase prior to its analysis by electrothermal atomic absorption spectrometry (ET AAS). The adopted concentrations for DDTP, Triton X-114 and hydrochloric acid were all optimized. Pyrolysis and atomization temperatures were optimized using the extracts and pyrolysis temperatures of 700 °C for both elements and atomization temperatures of 1400 and 1600 °C for cadmium and lead, respectively, were used without adding any modifier, which shows that considerable analyte stabilization is provided by the medium itself. A more detailed investigation was carried out to determine which components of the extract were responsible for the high thermal stability achieved and it revealed that the amount of DDTP added and the phosphorus content of the digested samples contributed significantly to this phenomenon. Detection limits (3σ_B) of 6 and 40 ng g⁻¹, along with enrichment factors of 129 and 18 for Cd and Pb, respectively, were achieved. The proposed procedure was applied to the analysis of five certified biological reference materials after microwave-assisted acid digestion in a mixture of H₂O₂ and HNO₃. Comparison with certified values was performed for accuracy evaluation, resulting in good agreement according to the t-test for a 95% confidence level. The high efficiency of cloud point extraction to carry out the determination of the studied analytes in complex matrices was, therefore, demonstrated.