二茂锆羧酸配合物的合成——二茂锆氢化物与α,β—不饱和酸或钠盐反应的研究

本文研究了Cp_2ZrH_2与丙烯酸和Cp_2Zr(H)Cl与丙烯酸钠、巴豆酸钠的反应。产物由IR 1~H和~(13)CNMR、ESR谱、气相色谱以及化学方法分析鉴定。产物水解得到与底物相应的饱和酸.用~1H NMR方法考察了Cp_2ZrH_2与丙烯酸的反应过程,用IR方法考察了Cp_2Zr(H)Cl与丙烯酸钠的反应过程。实验结果表明,上面两种反应首先消除H_2或NaCl,形成锆氧健,然后碳碳双键还原生成二茂锆羧酸盐配合物,其中羧酸根离子与二茂锆桥式双齿配位。     

Transition-metal-promoted or -catalyzed exocyclic alkyne insertion via zirconacyclopentene with carborane auxiliary: formation of symmetric or unsymmetric benzocarboranes

Reactions of Cp(2)Zr(μ-Cl)(μ-C(2)B(10)H(10))Li(OEt(2))(2) with alkynes R(1)C≡CR(2) gave as insertion products zirconacyclopentenes incorporating a carboranyl unit, 1,2-[Cp(2)ZrC(R(1))═C(R(2))]-1,2-C(2)B(10)H(10) (1). Treatment of 1 with another type of alkyne R(3)C≡CR(4) in the presence of stoichiometric amounts of NiCl(2) and FeCl(3) or a catalytic amount of NiCl(2) afforded symmetric or unsymmetric benzocarboranes. The regioselectivity was dominated by the polarity of the corresponding alkynes. These reactions could also be carried out in one pot, leading to the equivalent of a three-component [2 + 2 + 2] cycloaddition of carboryne and two different alkynes promoted by transition metals. A reaction mechanism was proposed after the isolation and structural characterization of the key intermediate nickelacycle. These results show that nickel complexes are more reactive than the iron ones toward the insertion of alkynes but that the latter do not initiate the trimerization of alkynes, making the insertion of activated alkynes possible. This work also demonstrates that a catalytic amount of nickel works as well as a stoichiometric amount of nickel in the presence of excess FeCl(3) for the reactions. Such a catalytic reaction may shed some light on the development of zirconocene-based catalytic reactions.     

Reactivity of Zirconocene Azametallacyclobutenes: Insertion of Aldehydes, Carbon Monoxide, and Formation of alpha,beta-Unsaturated Imines. Formation and Trapping of [Cp(2)Zr=O] in a [4 + 2] Retrocycloaddition(1)

Azametallacyclobutene Cp(2)ZrN-t-BuCEt=CEt (1) underwent an insertion reaction with CO to form the acyl complex 2 (Cp(2)Zr(N-t-BuCEtCEtCO), 67% yield). The addition of acetone to azametallacyclobutene 3 (Cp(2)Zr(NArCMeCPh), Ar = 2,6-dimethylphenyl) yielded the N-bonded enamine and O-bonded enolate complex of zirconocene 4 (Cp(2)Zr(NArCMeCPhH)(OCMeCH(2)), 76% yield). The addition of aldehydes RCOH to metallacycle 3 resulted in the insertion of the aldehyde into the Zr-C bond to form complexes Cp(2)Zr(NArCMeCPhCRHO) (8a) and Cp(2)Zr(NArCMeCPhC(i-Pr)HO (9) in 85% (R = Ph) and 73% yields, respectively. Similarly, treatment of metallacycle 10 (Cp(2)Zr(NArCEtCEt)) with benzaldehyde yielded the insertion product 11 (Cp(2)Zr(NArCEtCEtCPhHO)) in 56% isolated yield. The structure of complex 11 was confirmed by an X-ray crystallographic study. Heating the insertion products 8a and 9 led to elimination of the alpha,beta-unsaturated imines 13 and 14a (ArN=CMeCPh=CRH) in 53% and 72% yields, respectively, and the formation of oxozirconocene oligomer (Cp(2)ZrO)(n)(). The oxozirconocene monomer was trapped by dimethylzirconocene, preventing the formation of oligomer and resulting in the isolation of product 15. A kinetic study of this retrocycloaddition produced the following activation parameters: DeltaH() = 26.5 kcal/mol, DeltaS() = 3.48 eu. A Hammett sigma/rho study showed that electron-donating groups alpha to the metallacycle oxygen accelerate the retrocycloaddition (rho = -0.8).     

Transformation of zirconocene-olefin complexes into zirconocene allyl hydride and their use as dual nucleophilic reagents: reactions with acid chloride and 1,4-diketone

Zirconocene-olefin complexes Cp(2)Zr(H(2)C=CHR), prepared in benzene-THF at 0 degrees C, react with acid chlorides to provide homoallylic alcohols. The key is an equilibrium between the zirconocene-olefin complexes and the corresponding zirconocene allyl hydride complexes via allylic C-H bond cleavage of the coordinating alkenes. Furthermore, the zirconocene-olefin complexes are also available for the reaction with 1,4-diketone to afford anti-1,4-diols with excellent diastereoselectivity. Thus, Cp(2)Zr(H(2)C=CHR) serves as a donor of both hydride and an allylic group. These reactions also proceed efficiently by using zirconocene-olefin complexes, derived from Cp(2)ZrCl(2), Mg metal, and 1-alkenes.     

Is an M?N σ‐Bond Insertion Route a Viable Alternative to the MN [2+2] Cycloaddition Route in Intramolecular Aminoallene Hydroamination/Cyclisation Catalysed by Neutral Zirconium Bis(amido) Complexes? A Computational Mechanistic Study

This study examines alternative reaction channels for intramolecular hydroamination/cyclisation (IHC) of primary 4,5-hexadien-1-ylamine aminoallene (1) by a neutral [Cp(2)ZrMe(2)] zirconocene precatalyst (2) by using the density functional theory (DFT) method. The first channel proceeds through a [Cp(2)Zr(NHR)(2)] complex as the reactive species and relevant steps including the insertion of an allenic C=C linkage into the Zr--NHR sigma-bond and ensuing protonolysis. This is contrasted to the [2+2] cycloaddition mechanism involving a [Cp(2)Zr=NR] transient species. The salient features of the rival mechanisms are disclosed. The cycloaddition route entails the first transformation of the dormant [Cp(2)Zr(NHR)(2)] complex 3 B into the transient [Cp(2)Zr=NR] intermediate 3 A', which is turnover limiting. This route features a highly facile ring closure together with a substantially slower protonolysis (k(cycloadd)>k(protonolysis)) and can display inhibition by high substrate concentration. In contrast, protonolysis is the more facile step for the channel proceeding through the [Cp(2)Zr(NHR)(2)] complex as the catalytically active species. Here, C=C insertion into the Zr--C sigma-bond of 3 B, which represents the catalyst resting state, is turnover limiting and substrate concentration is unlikely to influence the rate. The regulation of the selectivity is elucidated for the two channels. DFT predicts that five-ring allylamine and six-ring imine are generated upon traversing the cycloaddition route, thereby comparing favourably with experiment, whereas the cycloimine should be formed solely along the sigma-bond insertion route. The mechanistic analysis is indicative of an operating [2+2] cycloaddition mechanism. The Zr--NHR sigma-bond insertion route, although appearing not to be employed for the reactants studied herein, is clearly suggested as being viable for hydroamination by charge neutral organozirconium compounds.     

Vinylierung und 91Zr-NMR-Spektren von Substituierten Zirconocendichloriden

Vinylation and ⁹¹Zr N.M.R. Spectra of substituted Zirconocene Dichlorides Substituted zirconocene dichlorides react with vinyl lithium with formation of zirconacyclopent-2-enes, Cp₂ZrCH = CHCH₂CH₂, or zirconocene butadiene complexes, Cp₂Zr(C₄H₆). The compounds obtained were characterized by their ¹H and ¹³C n.m.r. spectra. The ⁹¹Zr n.m.r. chemical shifts of substituted zirconocene dichlorides correlate with the bond angles Cp′? Zr? Cp′ and Cl? Zr? Cl respectively. They can be used to estimate the reaction behaviour of zirconocene dichlorides.     

Catalytically active,recyclable zirconocene supported at cross-links within porous polymer disks

[reaction: see text] Copolymerization of bis(4-vinylbenzylcyclopentadienyl)zirconium dichloride and styrene in a test tube, followed by extraction of the bulk polymer and slicing into "disks" 1 mm thick and 5 mm in diameter, gives a supported zirconocene species that exhibits both stoichiometric and catalytic chemical activity. The disks catalyze reaction of trimethylaluminum and phenylacetylene to give alpha-methylstyrene with modest turnover numbers and are active over at least six recyclings.     

Postulation of the mechanism of the selective synthesis of isotactic poly(methyl methacrylate) catalysed by [Zr[(Cp)(Ind)CMe2](Me)(thf)](BPh4): a Hartree-Fock, MP2 and density functional study

The bridged. C1-symmetric, single-component zirconocene [Zr((Cp)(Ind)CMe2](Me)(thf)](BPh4) (Ind = indenyl, Cp = cyclopentadienyl) polymerises methyl methacrylate (MMA) selectively to isotactic poly(methyl methacrylate) (PMMA) without further cocatalysts or activators. To elucidate the stereoselective steps of the polymerisation of MMA by using this catalyst we studied the propagation steps occurring with the derivative [Zr[(Cp)(Ind)CH2][-O-C(OMe)=C(Me)(Et)](MMA)]+ by ab initio calculations at the Hartree-Fock(HF) level of theory. After the initiation step, which consumes the first two MMA molecules, each new catalytic cycle begins with the stereoselective addition of a new MMA molecule at the indenyl side of the zirconocene fragment. At the same time the enolate ring undergoes a stereoselective in-plane ring shift to the side opposite to the indenyl ring. These findings are used to postulate a mechanism for the polymerisation that explains the stereoselective synthesis of isotactic PMMA.     

Zirconium-mediated metathesis of imines: a study of the scope, longevity, and mechanism of a complicated catalytic system

By kinetically stabilizing imidozirconocene complexes through the use of a sterically demanding ligand, or by generating a more thermodynamically stable resting state with addition of diphenylacetylene, we have developed transition metal-catalyzed imine metathesis reactions that are mechanistically analogous to olefin metathesis reactions catalyzed by metal carbene complexes. When 5 mol % of Cp*Cp(THF)Zr=N(t)Bu is used as the catalyst precursor in the metathesis reaction between PhCH=NPh and p-TolCH=N-p-Tol, a 1:1:1:1 equilibrium mixture with the two mixed imines p-TolCH=NPh and PhCH=N-p-Tol is generated in C(6)D(6) at 105 degrees C. The catalyst was still active after 20 days with an estimated 847 turnovers (t(1/2) 170 m; TON = 1.77 h(-1)). When the azametallacyclobutene Cp(2)Zr(N(Tol)C(Ph)=C(Ph)) is used as the catalyst precursor under similar reaction conditions, a total of 410 turnovers are obtained after 4 days (t(1/2) 170 m; TON = 4.3 h(-1)). An extensive kinetic and equilibrium analysis of the metallacyclobutene-catalyzed metathesis of PhCH=N-p-Tol and p-F-C(6)H(4)CH=N-p-F-C(6)H(4) was carried out by monitoring the concentrations of imines and observable metal-containing intermediates over time. Numerical integration methods were used to fit these data to a detailed mechanism involving coordinatively unsaturated (16-electron) imido complexes as critical intermediates. Examination of the scope of reaction between different organic imines revealed characteristic selectivity that appears to be unique to the zirconium-mediated system. Several zirconocene complexes that could generate the catalytically active "CpCp'Zr=NAr" (Cp' = Cp or Cp*) species in situ were found to be effective agents in the metathetical exchange between different N-aryl imines. N-Alkyl aldimines were found to be completely unreactive toward metathesis with N-aryl aldimines, and metathesis reactions involving the two N-alkyl imines TolCH=NPr and PhCH=NMe gave slow or erratic results, depending on the catalyst used. Metathesis was observed between N-aryl ketimines and N-aryl aldimines, but for N-aryl ketimine substrates, the catalyst resting state consists of zirconocene enamido complexes, generated by the formal C-H activation of the alpha position of the ketimine substrates.     

Stereo-electronic interaction in complex molecules: cyclopropyl conjugation with Lewis acidic centres across connecting carbon-carbon triple bonds

Bis(cyclopropylethynyl)zirconocene shows a bisected conformation in the crystal: the magnitude of the stabilizing conjugation of the Cp2Zr Lewis acid centre with the cyclopropyl substituent across the connecting C[triple bond]C triple bond is assessed by DFT calculations and a comparison with a series of cationic organic and organometallic reference systems.     

Conformational, steric and electronic effects on the site- and chemoselectivity of the metal-catalyzed reaction of N-bis(trimethylsilyl)methyl, N-(2-indolyl)methyl α-diazoamides

The Rh(II)- and Cu(II)-catalyzed reactions of N-bis(trimethylsilyl)methyl, N-(2-indolyl)methyl α-diazoamides are investigated to delineate how conformational, steric and electronic factors influence the site- and chemoselectivity of the metallocarbenoid reaction. The N-bis(trimethylsilyl)methyl (N-BTMSM) group is found to be essential in promoting the metallocarbenoid reaction at the N-(2-indolyl)methyl moiety as well as providing subtle but effective conformational influence about the amide N-C(α) sigma bond in diazoamides carrying an N-C(α) alkoxymethyl side-chain, to afford excellent site- and chemoselectivity. In general, the metal-catalyzed reactions are found to favor metallocarbenoid addition to the indole C(2)-C(3) double bond over C-H insertion to give cyclopropanated products (tetracyclic γ-lactams); however, chemoselectivity is also affected by steric effects, as revealed in the N-[2-(3-methylindolyl)]methyl diazoamides, and to some extent by the nature of the catalyst employed, as seen in the N-C(α)-alkoxymethyl diazoamides. The tetracyclic γ-lactams are found to rearrange to give good to high yields of the tricyclic indole derivatives under the metallocarbenoid reaction conditions or under acidic conditions. The propensity of the tetracyclic γ-lactams to undergo rearrangement is found to be dependent on the nature of the α-substituent on the original diazo carbon and the indole N-substituent.     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.     

A Convergent,Modular Approach to Trifluoromethyl-Bearing 5-Membered Rings via Catalytic C(sp3)−H Activation

Trifluoromethyl-bearing 5-membered rings are prevalent in bioactive molecules, but modular approaches to these compounds by functionalization of robust C(sp³)−H bonds in a direct and selective manner are extremely challenging. Herein we report the rhodium-catalyzed α-CF₃-α-alkyl carbene insertion into C(sp³)−H bonds of a broad range of substrates to access 7 types of CF₃-bearing saturated 5-membered carbo- and heterocycles. The reaction is particularly effective for benzylic C−H insertion exerting good site-, diastereo- and enantiocontrol, and applicable to the synthesis of chiral CF₃ analogues of bioactive molecules. Ruthenium α-CF₃-α-alkyl carbene complexes underwent stoichiometric reactions to give C−H insertion products, lending evidence for the involvement of metal α-CF₃-α-alkyl carbene species in the catalytic cycle. DFT calculations revealed that the π⋅⋅⋅π attraction and intra-carbene C−H⋅⋅⋅F hydrogen bond elucidate the origin of selectivity of the benzylic C−H insertion reactions.     

Catalytic versus stoichiometric coupling of alkynes with trimethylvinylsilane mediated by zirconocene

Trimethylvinylsilane and disubstituted alkynes underwent coupling reactions in the presence of the lanthanide-originated zirconocene equivalent. Both reactions, stoichiometric and catalytic in zirconium, could be carried out; in the latter case the addition of a stoichiometric amount of AlCl₃ was needed. The catalytic cycle involving bimetallic polarization and a transmetallation step has been proposed.     

Synthesis, characterization, and activity in ethylene polymerization of silica supported cationic cyclopentadienyl zirconium complexes

Cp*ZrMe3 reacts with silica pretreated at 800 degrees C, SiO(2-(800)) through two pathways: (a) protolysis of a Zr-Me group by surface silanols and (b) transfer of a methyl group to the surface by opening of strained siloxane bridges, in a relative proportion of ca. 9/1, respectively, affording a well-defined surface species [([triple bond]SiO)ZrCp*(Me)2], 3, but with two different local environments 3a, [([triple bond]SiO)ZrCp*(Me)2][[triple bond]Si-O-Si[triple bond]], and the other with 3b, [structure: see text]. The reaction of the species 3 with B(C6F5)3 is controlled by this local environment and gives three surface species [([triple bond]SiO)ZrCp*(Me)](+)[MeB(C6F5)3]- [[triple bond]Si-O-Si[triple bond]], 4a (20%), [([triple bond]SiO)ZrCp*(Me)](+)[(Me)B(C6F5)3]- [[triple bond]Si-Me], 4b (10%), and [([triple bond]SiO)2ZrCp*](+)[(Me)B(C6F5)(3)](-)[[triple bond]Si-O-Si[triple bond]], 5 (70%). On the contrary, the reaction of Cp*Zr(Me)3, Cp2Zr(Me)2 with [[triple bond]SiO-B(C6F5)3](-)[HNEt2Ph]+, 6, leads to a unique species [([triple bond]SiO)B(C6F5)3](-)[Cp*Zr(Me)2.NEt2Ph]+, 7, and [([triple bond]SiO)ZrCp2](+)[(Me)B(C6F5)3]-, 9 respectively. The complexes 4 and 7 are active catalysts in ethylene polymerization at room temperature, 93 and 67 kg PE mol Zr1- atm(-1) bar(-1), respectively, indicating that covalently bounded Zr catalyst 4 is slightly more active than the "floating" cationic catalyst 7.     

Cyclopentadienyl substituent effects on reductive elimination reactions in group 4 metallocenes: kinetics,mechanism, and application to dinitrogen activation

The rate of reductive elimination for a family of zirconocene isobutyl hydride complexes, Cp(CpR(n)())Zr(CH(2)CHMe(2))H (Cp = eta(5)-C(5)Me(5), CpR(n)() = substituted cyclopentadienyl), has been measured as a function of cyclopentadienyl substituent. In general, the rate of reductive elimination increases modestly with the incorporation of sterically demanding substituents such as [CMe(3)] or [SiMe(3)]. A series of isotopic labeling experiments was used to elucidate the mechanism and rate-determining step for the reductive elimination process. From these studies, a new zirconocene isobutyl hydride complex, Cp' '(2)Zr(CH(2)CHMe(2))(H) (Cp' ' = eta(5)-C(5)H(3)-1,3-(SiMe(3))(2)), was designed and synthesized such that facile reductive elimination of isobutane and activation of dinitrogen was observed. The resulting dinitrogen complex, [Cp' '(2)Zr](2)(mu(2), eta(2),eta(2)-N(2)), has been characterized by X-ray diffraction and displays a bond length of 1.47 A for the N(2) ligand, the longest observed in any metallocene dinitrogen complex. Solution magnetic susceptibility demonstrates that [Cp' '(2)Zr](2)(mu(2), eta(2), eta(2)-N(2)) is a ground-state triplet, consistent with two Zr(III), d(1) centers. Mechanistic studies reveal that the dinitrogen complex is derived from the reaction of N(2) with the resulting cyclometalated zirconocene hydride rather than directly from reductive elimination of alkane.     

Organic reactions mediated by electrochemically generated ArS+

Low-temperature electrochemical oxidation of ArSSAr was carried out to generate a pool of "ArS(+)". Spectroscopic studies ((1)H NMR and CSI-MS) of the resulting solution revealed the accumulation of ArS(ArSSAr)(+). The resulting "ArS(+)" pool reacted with alkenes and alkynes to give diarylthio-substituted products. The "ArS(+)" pool rapidly reacted with thioacetals to give the corresponding alkoxycarbenium ion pools, which reacted with various carbon nucleophiles (indirect cation pool method). The reaction of the alkoxycarbenium ion pools with stilbene derivatives in the presence of ArSSAr gave thiochroman derivatives. In addition to such stoichiometric reactions, a catalytic amount of "ArS(+)" serves as an initiator and a chain carrier of some cationic chain reactions involving intramolecular carbon-carbon bond formation. In situ generation of "ArS(+)" by electrochemical oxidation of ArSSAr with a catalytic amount of electricity in the presence of a substrate is also effective for such cationic chain reactions.     

Different C-C coupling reactions of permethyltitanocene and permethylzirconocene with disubstituted 1,3-butadiynes

Herein we describe different C-C coupling reactions of permethyltitanocene and -zirconocene with disubstituted 1,3-butadiynes. The outcomes of these reactions vary depending on the metals and the diyne substituents. The reduction of [Cp2*MCl2] (Cp* = C5Me5; M = Ti, Zr) with Mg in the presence of disubstituted butadiynes RC triple bond C-C triple bond CR' is suitable for the synthesis of different C-C coupling products of the diyne and the permethylmetallocenes, and provides a new method for the generation of functionalized pentamethyl-cyclopentadienyl derivatives. For M = Zr and R = R' = tBu, the reaction gives, by a twofold activation of one pentamethylcyclopentadienyl ligand, the complex [Cp*Zr[-C(=C=CHtBu)-CHtBu-CH2-eta5-C5Me3-CH2-]] (3), containing a fulvene ligand that is coupled to the modified substrate (allenic subunit). When using the analogous permethyltitanocene fragment "Cp2*Ti", the reaction depends strongly on the substituents R and R'. The coupling product of the butadiyne with two methyl groups of one of the pentamethylcyclopentadienyl ring systems, [Cp*Ti[eta5-C5Me3-(CH2-CHR-eta2-C2-CHR'-CH2)]], is obtained with R = R' = tBu (4) and R = tBu, R' = SiMe3 (5). In these complexes one pentamethylcyclopentadienyl ligand is annellated to an eight-membered ring with a C-C triple bond, which is coordinated to the titanium center. A different activation of both pentamethylcyclopentadienyl ligands is observed for R = R' = Me, resulting in the complex [[eta5-C5Me4(CH2)-]Ti[-C(=CHMe)-C(=CHMe)-CH2-eta5-C5Me4]] (6), which displays a fulvene as well as a butadienyl-substituted pentamethylcyclopentadienyl ligand. The influence exerted by the size of the metal is illustrated in the reaction of [Cp2*ZrCl2] with MeC triple bond C-C triple bond CMe. Here the five-membered metallacyclocumulene complex [Cp2*Zr(eta4-1,2,3,4-MeC4Me)] (7) is obtained. The reaction paths found for R = R' = Me are identical to those formerly described for R = R' = Ph.     

Cp*RuCl(COD) in catalysis: A unique role in the addition of diazoalkane carbene to alkynes

The catalytic transformations of functional alkynes with diazoalkanes in the presence of the catalyst precursor RuCl(COD)Cp* are presented. They show the unique role played by the Ru(X)Cp* moiety in catalysis and that the nature of the formed products strongly depends on the alkyne functionality. Simple alkynes generate dienes via double diazoalkane carbene addition to the triple bond. Enynes with terminal triple bond lead to alkenyl bicyclo[x.1.0]alkanes, including bicyclic aminoacid derivatives. 1,6-enynes with disubstituted propargylic carbon produce in priority alkenyl alkylidene cyclopentanes. 1,6-Allenynes offer the direct access to alkenyl alkylidene bicyclo[3.1.0]hexanes. Propargylic carboxylates lead to conjugated dienes by coupling of the diazoalkane carbene with the alkyne terminal carbon and 1,2-shift of the carboxylate. All catalytic reactions can be explained by the initial formation of the 16 electron RuCl(CHR)Cp* moiety giving first a 2+2 cycloaddition with the alkyne triple bond.     

Synthesis and structure of 1-zirconacyclopent-3-yne complexes without substituents adjacent to the triple bond

Five-membered metallacyclic alkynes that have no substituents adjacent to the triple bond have been synthesized, isolated, and structurally characterized. Zirconocene dichlorides, Cp'2ZrCl2 (Cp' = C5H5, C5H4-t-Bu), reacted with 1,4-dichlorobut-2-yne in the presence of magnesium to give 1-zirconacyclopent-3-yne compounds (5 (a) Cp' = C5H5, (b) Cp' = C5H4-t-Bu) that have a -CH2CCCH2- moiety in good yields. They are stable enough to be isolated in a pure form, despite the absence of substituents. 5a reacted with an equimolar amount of Cp2Zr(but-1-ene)(PMe3) to produce a bimetallic complex in which the zirconacyclopentyne coordinates to the other zirconocene moiety as an alkyne.