Cyto-mechanoresponsive polyelectrolyte multilayer films

Cell adhesion processes take place through mechanotransduction mechanisms where stretching of proteins results in biological responses. In this work, we present the first cyto-mechanoresponsive surface that mimics such behavior by becoming cell-adhesive through exhibition of arginine-glycine-aspartic acid (RGD) adhesion peptides under stretching. This mechanoresponsive surface is based on polyelectrolyte multilayer films built on a silicone sheet and where RGD-grafted polyelectrolytes are embedded under antifouling phosphorylcholine-grafted polyelectrolytes. The stretching of this film induces an increase in fibroblast cell viability and adhesion.     

Fibronectin adsorption onto polyelectrolyte multilayer films

The Layer-by-layer deposition of positively and negatively charged macromolecular species is an ideal method for constructing thin films incorporating biological molecules. We investigate the adsorption of fibronectin onto polyelectrolyte multilayer (PEM) films using optical waveguide lightmode spectroscopy (OWLS) and atomic force microscopy (AFM). PEM films are formed by adsorption onto Si(Ti)O2 from alternately introduced flowing solutions of anionic poly(sodium 4-styrenesulfonate) (PSS) and cationic poly(allylamine hydrochloride) (PAH). Using OWLS, we find the initial rate and overall extent offibronectin adsorption to be greatest on PEM films terminated with a PAH layer. The polarizability density of the adsorbed protein layer, as measured by its refractive index, is virtually identical on both PAH- and PSS-terminated films; the higher adsorbed density on the PAH-terminated film is due to an adsorbed layer of roughly twice the thickness. The binding of monoclonal antibodies specific to the protein's cell binding site is considerably enhanced to fibronectin adsorbed to the PSS layer, indicating a more accessible adsorbed layer. With increased salt concentration, we find thicker PEM films but considerably thinner adsorbed fibronectin layers, owing to increased electrostatic screening. Using AFM, we find adsorbed fibronectin layers to contain clusters; these are more numerous and symmetric on the PSS-terminated film. By considering the electrostatic binding of a segmental model fibronectin molecule, we propose a picture of fibronectin adsorbed primarily in an end-on-oriented monolayer on a PAH-terminated film and as clusters plus side-on-oriented isolated molecules onto a PSS-terminated film.     

Photopatterned nanoporosity in polyelectrolyte multilayer films

We report on spatial control of nanoporosity in polyelectrolyte multilayer (PEM) films using photopatterning and its effects on film optical and adsorption properties. Multilayers assembled from poly(acrylic acid-ran-vinylbenzyl acrylate) (PAArVBA), a photo-cross-linking polymer, and poly(allylamine hydrochloric acid) (PAH) were patterned using ultraviolet light followed by immersion in low pH and then neutral pH solutions to induce nanoporosity in unexposed regions. Model charged small molecules rhodamine B, fluorescein, and propidium iodide and the model protein albumin exhibit increased adsorption to nanoporous regions of patterned PEM films as shown by fluorescence microscopy and radiolabeling experiments. Films assembled with alternating stacks of PAH/poly(sodium-4-styrene sulfonate) (SPS), which do not become nanoporous, and stacks of PAH/PAArVBA were patterned to create nanoporous capillary channels. Interdigitated channels demonstrated simultaneous, separate wicking of dimethyl sulfoxide-solvated fluorescein and rhodamine B. In addition, these heterostack structures exhibited patternable Bragg reflectivity of greater than 25% due to refractive index differences between the nanoporous and nonporous stacks. Finally, the PEM assembly process coupled with photo-cross-linking was used to create films with two separate stacked reflective patterns with a doubling in reflectivity where patterns overlapped. The combined adsorptive and reflective properties of these films hold promise for applications in diagnostic arrays and therapeutics delivery.     

Fabrication of polyelectrolyte multilayer films comprising nanoblended layers

Polyelectrolyte multilayer thin films were prepared via the alternate deposition of poly(allylamine hydrochloride) (PAH) and a blend of poly(acrylic acid) (PAA) and poly(styrenesulfonate) (PSS). When the pH of the blend solution was 3.5, the presence of PAA in this solution significantly increased the total film thickness. With only 10 wt % PAA in the blend adsorption solution, a large increase in film thickness was observed (92 nm cf. 18 nm). It was also demonstrated that the total amount of PSS adsorbed was enhanced by the presence of PAA in the blend solution, showing that the blend solution composition influenced that of the multilayer films. Thin films prepared with nanoblended layers also showed improved pH stability, because they exhibited reduced film rearrangement upon exposure to acidic conditions (pH = 2.5).     

Cell surface engineering with polyelectrolyte multilayer thin films

Layer-by-layer assembly of polyelectrolyte multilayer (PEM) films represents a bottom-up approach for re-engineering the molecular landscape of cell surfaces with spatially continuous and molecularly uniform ultrathin films. However, fabricating PEMs on viable cells has proven challenging owing to the high cytotoxicity of polycations. Here, we report the rational engineering of a new class of PEMs with modular biological functionality and tunable physicochemical properties which have been engineered to abrogate cytotoxicity. Specifically, we have discovered a subset of cationic copolymers that undergoes a conformational change, which mitigates membrane disruption and facilitates the deposition of PEMs on cell surfaces that are tailorable in composition, reactivity, thickness, and mechanical properties. Furthermore, we demonstrate the first successful in vivo application of PEM-engineered cells, which maintained viability and function upon transplantation and were used as carriers for in vivo delivery of PEMs containing biomolecular payloads. This new class of polymeric film and the design strategies developed herein establish an enabling technology for cell transplantation and other therapies based on engineered cells.     

Separation of acetylcholinesterase inhibitors using polymeric surfactants in polyelectrolyte multilayer coatings

The main objective of this study is the use of polymeric surfactants in polyelectrolyte multilayer (PEM) coatings for the separation of the pharmaceutical substances acetylcholinesterase inhibitors (AChEIs). AChEIs are used for the treatment of Alzheimer's Disease and Myasthenia Gravis. In the open-tubular capillary electrochromatography (OT-CEC) mode, the PEM coating is evaluated using nine AChEIs. Optimal conditions are established by altering several experimental parameters such as the pH of the background electrolyte (BGE), the anionic polymer for the PEM coating, the concentration of NaCl, which is used as an additive in the polymer deposition solutions, the number of bilayers, the deposition time, and the concentration of the polymeric surfactant. 25 mM NaH(2)PO(4).H(2)Ο and 25 mM Na(2)HPO(4) at pH 7 is used as BGE. Two bilayers of poly(diallyl dimethyl ammonium chloride) and poly(sodium N-undecanoyl L-leucinate) provide a baseline separation of all nine analytes in less than 4.5 min. Run-to-run reproducibility studies are also performed, and the relative standard deviation values of the migration times of the nine-analyte peaks are less than 2%. In addition, day-to-day, week-to-week and capillary-to-capillary reproducibilities are evaluated, and the relative standard deviation values of the electroosmotic flow are less than 2%. Finally, using the PEM coating approach, we were able to perform more than 150 runs in the same column. Neither the addition of the polymeric surfactant to the mobile phase, nor the reconstruction of the coating was necessary.     

The effect of surfactants on adsorbed layers of a cationic polyelectrolyte

A comparative study of the influence of anionic (sodium dodecyl sulfate, SDS), cationic (tetradecyltrimethylammonium bromide, TTAB) and non-ionic (penta-ethyleneglycol mono n-dodecyl ether, C₁₂E₅) surfactants on the structure and composition of adsorbed layers of cationic hydrophobically modified hydroxyethylcellulose (Quatrisoft LM 200) on hydrophilic surfaces (mica and silica) was carried out using surface force apparatus andin situ null ellipsometry. It is shown that a complex interplay of electrostatic, hydrophobic, and steric effect govern polymer/surfactant/surface interactions and that the effect of surfactant addition strongly depends on its nature and concentration.Both anionic and non-ionic surfactants exhibit aggregation on the polymer hydrophobes. SDS has the most profound influence on Quatrisoft interfacial behavior due to the changes in electrostatics accompanying formation of the polymer/surfactant complex. In the case of C₁₂E₅, large surfactant clusters bound to the polymer affect the macromolecules' conformation in the adsorbed layer via steric effects. In contrast to SDS and C₁₂E₅, no evidence of interaction between the polycation and a like-charged surfactant, TTAB, was obtained. At the same time, TTAB adsorbs on the surface in competition with the polyelectrolyte. This results in partial displacement of the latter and its looser attachment to the surface.     

Modulation of hemocompatibility of polysulfone by polyelectrolyte multilayer films

Polyelectrolyte multilayer (PEM) films have been recently applied to surface modification of biomaterials. Cellular interactions with PEM films consisted of weak polyelectrolytes are greatly affected by the conditions of polyelectrolyte deposition, such as pH of polyelectrolyte solution. Previous studies indicated that the adhesion of several types of mammalian cells to PAH/PAA multilayer films was hindered by low pH and high layer numbers. The objective of this study is to evaluate whether the hemocompatibility of polysulfone can be modulated by deposition of poly(allylamine hydrochloride) (PAH)/poly(acrylic acid) (PAA) multilayer films. PAH/PAA multilayer films with different layer numbers were assembled onto polysulfone at either pH 2.0 or pH 6.5. The number of platelet adhesion and the morphology of adherent platelets were determined to evaluate hemocompatibility of modified substrates. Compared to non-treat polysulfone, the PEM films developed at pH 2.0 decreased platelet adhesion, while those built at pH 6.5 enhanced platelet deposition. Platelet adhesion was found positively correlated to polyclonal antibodies binding to surface-bound fibrinogen. The extent of platelet spreading was increased with layer numbers of PEM films, suggesting that the adherent platelets on thick PEM films were prone to activation. In conclusion, PAH/PAA films with few layers developed at pH 2.0 possessed better hemocompatibility compared to other substrates.     

Nanomechanical properties of polyaniline and azo polyelectrolyte multilayer films

<正>Nanomechanical properties of multilayer films constructed of polyaniline(PANI) and azobeneze-containing polyelectrolytes(PNACN and PPAPE) were studied by using nanoindentation method.The multilayer films were prepared by the electrostatic layer-by-layer self-assembly through alternately dipping in the polymer solutions.The multilayer films deposited onto the glass slides after proper dry were used for the nanomechanical property testing.The nanomechanical measurement indicated that the PANI/PNACN and PANI/PPAPE multilayers possessed the mean elastic modulus of 5.42 GPa and 4.35 GPa,and hardness of 0.26 GPa and 0.18 GPa,respectively.The nanoscratch properties of the PANI/PNACN and PANI/PPAPE multilayer films were also measured.The critical loads of PANI/PNACN and PANI/PPAPE films were 103.52 mN and 100.59 mN.The degree of electrostatic cross-linking in the multilayers could be altered by exposing the films to aqueous solutions with different pH values.As a result,the modulus and hardness of the multilayer films were changed through the solvent treatment.Both modulus and hardness of the PANI/PNACN films obviously increased after dipping the multilayer films in solutions with pH in a range from 9 to 11.     

Amperometric uric acid sensors based on polyelectrolyte multilayer films

Uricase (UOx) and polyelectrolyte were used for preparation of a permselective multilayer film and enzyme multilayer films on a platinum (Pt) electrode, allowing the detection of uric acid amperometrically. The polyelectrolyte multilayer (PEM) film composed of poly(allylamine) (PAA) and poly(vinyl sulfate) (PVS) were prepared via layer-by-layer assembly on the electrode, functioning as H₂O₂-selective film. After deposition of the permselective film (PAA/PVS)₂PAA, UOx and PAA were deposited via layer-by-layer sequential deposition up to 10 UOx layers to prepare amperometric sensors for uric acid. Current response to uric acid was recorded at +0.6 V vs. Ag/AgCl to detect H₂O₂ produced from the enzyme reaction. The response current increased with increasing the number of UOx layers. Even in the presence of ascorbic acid, uric acid can be detected over the concentration range 10⁻⁶-10⁻³ M. The response current and deposited amount of UOx were affected by deposition bath pH and the addition of salt. The deposition of PAA/UOx film prepared in 2 mg ml⁻¹ solution (pH 11) of PAA with NaCl (8 mg ml⁻¹) and 0.1 mg ml⁻¹ solution (pH 8.5) of UOx with borate (100 mM) resulted in an electrode which shows the largest response to uric acid. The response of the sensor to uric acid was decreased by 40% from the original activity after 30 days.     

Multilayer films of cationic surfactants incorporating polyoxometalate on electrodes

A new kind of multilayer of didodecyldimethylammonium bromide (DDAB) and 1:12 phosphomolybdic anions (PMo₁₂) was achieved on the surface of a wax-impregnated graphite (WIG) electrode by ion exchange and electrostatic interaction. The characterization and electrochemical behavior of the multilayer films of DDAB/PMo₁₂ is described in detail. The chemically modified electrode was shown to exhibit an excellent electrocatalytic activity toward the reduction of BrO₃ ^– anion in 0.5 M H₂SO₄ and possesses several attractive features, such as simple preparation, fast response, good stability, etc. Electronic Publication     

Selective Ni-P electroless plating on photopatterned cationic adsorption films influenced by alkyl chain lengths of polyelectrolyte adsorbates and additive surfactants

We demonstrated that the photopatterned single-layer adsorption film of poly(1-dodecyl-4-pyridinium bromide) on a silica surface was available for a template of nickel-phosphorus (Ni-P) electroless plating through sensitization with a SnCl(2) aqueous solution and activation with a PdCl(2) aqueous solution. Four kinds of poly(1-alkyl-4-vinylpyridinium halide)s bearing methyl, propyl, hexyl, and dodecyl groups were prepared. The cationic polymers were adsorbed by a negatively charged silica surface from their solutions, to form single-layer adsorption films exhibiting desorption-resistance toward deionized water and ethanol. The organic adsorption films could be decomposed completely by exposure to 172 nm deep-UV light. The formation and decomposition of the single-layer films were confirmed by deep-UV absorption spectral measurement and zeta-potential measurement. Ni-P electroless plating was carried out on the photopatterned adsorption films, using three types of SnO(x) colloidal materials without and with cationic or anionic surfactant as catalyst precursors in the sensitization step. In the case of the negatively charged SnO(x) colloids surrounded by anionic surfactant, Ni-deposition took place preferentially on the cationic adsorption films remaining in unexposed regions. The Ni-deposition was accelerated significantly on the cationic adsorption film bearing dodecyl groups. It was obvious by ICP-AES analyses that the hydrophobic long-chain dodecyl groups in the adsorption film could promote the adsorption of the negative SnO(x) colloids on the film surface, followed by much nucleus formation of zerovalent Pd catalysts useful for the electroless plating. The result of our experiment clearly showed that, in addition to electrostatic interaction, van der Waals interaction generating between the hydrophobic long-chain hydrocarbons of the adsorption film and the surfactant improved significantly the adsorption stability of the SnO(x) colloids, resulting in highly selective Ni-deposition in accord with the photopattern shape of the cationic single-layer adsorption film.     

Direct surface force measurements of polyelectrolyte multilayer films containing nanocrystalline cellulose

Polyelectrolyte multilayer films containing nanocrystalline cellulose (NCC) and poly(allylamine hydrochloride) (PAH) make up a new class of nanostructured composite with applications ranging from coatings to biomedical devices. Moreover, these materials are amenable to surface force studies using colloid-probe atomic force microscopy (CP-AFM). For electrostatically assembled films with either NCC or PAH as the outermost layer, surface morphology was investigated by AFM and wettability was examined by contact angle measurements. By varying the surrounding ionic strength and pH, the relative contributions from electrostatic, van der Waals, steric, and polymer bridging interactions were evaluated. The ionic cross-linking in these films rendered them stable under all solution conditions studied although swelling at low pH and high ionic strength was inferred. The underlying polymer layer in the multilayered film was found to dictate the dominant surface forces when polymer migration and chain extension were facilitated. The precontact normal forces between a silica probe and an NCC-capped multilayer film were monotonically repulsive at pH values where the material surfaces were similarly and fully charged. In contrast, at pH 3.5, the anionic surfaces were weakly charged but the underlying layer of cationic PAH was fully charged and attractive forces dominated due to polymer bridging from extended PAH chains. The interaction with an anionic carboxylic acid probe showed similar behavior to the silica probe; however, for a cationic amine probe with an anionic NCC-capped film, electrostatic double-layer attraction at low pH, and electrostatic double-layer repulsion at high pH, were observed. Finally, the effect of the capping layer was studied with an anionic probe, which indicated that NCC-capped films exhibited purely repulsive forces which were larger in magnitude than the combination of electrostatic double-layer attraction and steric repulsion, measured for PAH-capped films. Wherever possible, DLVO theory was used to fit the measured surface forces and apparent surface potentials and surface charge densities were calculated.     

Direct transfer of preformed patterned bio-nanocomposite films on polyelectrolyte multilayer templates

Microarrays containing multiple, nanostructured layers of biological materials would enable high-throughput screening of drug candidates, investigation of protein-mediated cell adhesion, and fabrication of novel biosensors. In this paper, we have examined in detail an approach that allows high-quality microarrays of layered, bionanocomposite films to be deposited on virtually any substrate. The approach uses LBL self-assembly to pre-establish a multilayered structure on an elastomeric stamp, and then uses microCP to transfer the 3-D structure intact to the target surface. For examples, different 3-D patterns containing dendrimers, polyelectrolyte multilayers and two proteins, sADH and sDH, have been fabricated. For the first time, the approach was also extended to create overlaid bionanocomposite patterns and multiple proteins containing patterns. The approach overcomes a problem encountered when using microCP to establish a pattern on the target surface and then building sequential layers on the pattern via LBL self-assembly. Amphiphilic molecules such as proteins and dendrimers tend to adsorb both to the patterned features as well as the underlying substrate, resulting in low-quality patterns. By circumventing this problem, this research significantly extends the range of surfaces and layering constituents that can be used to fabricate 3-D, patterned, bionanocomposite structures. [image in text]     

Absorption of light and heavy water vapours in polyelectrolyte multilayer films

We studied the swelling and the uptake of water (H₂O or D₂O) vapours in polyelectrolyte (PE) multilayer (PEM) samples deposited on solid support (Si wafers) as a function of the isotope nature of the vapour and the charge of the last polymer layer. The samples were prepared with deuterated poly(sodium 4-styrenesulfonate) (dPSS) and poly(allylamine hydrochloride) (PAH). Two types of samples were studied. The sample with a structure Si/PEI/(dPSS/PAH)₆/dPSS was negatively charged. A positively charged sample was PAH terminated and had the structure Si/PEI/(dPSS/PAH)₆. The film thickness and scattering length density were estimated from neutron reflectometry (NR) experiments and the results were complemented with in-situ QCM measurements.We demonstrate that the swelling of PEM in H₂O and D₂O vapours is similar. However, the amount of adsorbed D₂O is around 10% more than the adsorbed H₂O. Such isotope effect correlates well with the rough estimation that the isotope effect usually scales with the difference in the mass density of the different isotope forms of the substances. For precise analysis of the NR data we assumed existence of empty voids in the structure of the PEM. These voids might be filled with “condensed” water when the samples are exposed to water vapors. We show that the layers we studied consist of up to 25% of such voids.We showed that the amount of sorbed water depends on the nature of the last layer which builds the PEM thus confirming the “odd-even effect” already shown in the literature.     

Thin adsorbed films of a strong cationic polyelectrolyte on silica substrates

The adsorption of poly(diallyldimethyl ammonium chloride) (DADMAC) on planar silica substrates was examined as a function of ionic strength and pH. The study was carried out with reflectometry in an impinging-jet cell and complemented by atomic force microscopy (AFM) and ellipsometry investigations. The adsorption process is initially transport limited, whereby the adsorption rate increases somewhat with increasing ionic strength. This effect is caused by a simultaneous decrease of the hydrodynamic radius of the polymer. After a transient period, the adsorption process saturates and leads to an adsorption plateau. The plateau value increases strongly with increasing ionic strength. This increase can be explained by progressive screening of the electrostatic repulsion between the adsorbing polyelectrolyte chains, as can be rationalized by a random sequential adsorption (RSA) model. The adsorbed amount further increases with increasing pH, and this effect is probably caused by the corresponding increase of the surface charge of the silica substrate.     

Metal-enhanced fluorescence using silver nanoparticles-embedded polyelectrolyte multilayer films for microarray-based immunoassays

Metal-enhanced fluorescence (MEF) of quantum dots (QDs) and its potential application in microarray-based immunoassays was investigated using silver nanoparticles (AgNPs) prepared by the in situ photoreduction of Ag⁺ inside a multilayer film consisting of poly(ethyleneimine) (PEI) and hyaluronic acid (HA). UV–Vis spectroscopy, X-ray diffraction, atomic force microscopy, scanning electron microscopy, and transmission electron microscopy confirmed the formation of well-dispersed AgNPs within the multilayer films, the thickness and the amount of which depended on the number of HA layers. Using AgNPs-containing hybrid multilayered films, it was possible to observe the MEF effect of adsorbed QDs, which could be tuned by the thickness of interlayer spacer film prepared of the layer-by-layer assembly of PEI and poly(styrene sulfonate). When the MEF-inducing hybrid film was used as a platform for immunoassay, a significant improvement in the fluorescence signal and sensitivity of the biosensing were observed in the presence of AgNPs in comparison with films that did not contain the nanoparticles.     

Controlling primary hepatocyte adhesion and spreading on protein-free polyelectrolyte multilayer films

The development of new methods for fabricating thin films that provide precise control of the three-dimensional topography and cell adhesion could lead to significant advances in the fields of tissue engineering and biosensors. This Communication describes the successful attachment and spreading of primary hepatocytes on polyelectrolyte multilayer (PEM) films without the use of adhesive proteins such as collagen or fibronectin. We demonstrate that the attachment and spreading of primary hepatocytes can be controlled using this layer-by-layer deposition of ionic polymers. In our study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated poly(styrene) (SPS) as the polycation and polyanion, respectively, to build the multilayers. Primary hepatocytes attached and spread preferentially on SPS surfaces over PDAC surfaces. SPS patterns were formed on PEM surfaces, either by microcontact printing of SPS onto PDAC surfaces or vice versa, to obtain patterns of primary hepatocytes. PEM is a useful technique for fabricating controlled co-cultures with specified cell-cell and cell-surface interactions on a protein-free environment, thus providing flexibility in designing cell-specific surfaces for tissue engineering applications.     

Aqueous films on silica in the presence of cationic surfactants

Summary The existence of thick, stable water films on silica as described byDerjaguin and Kussakov (1939) has been confirmed in several laboratories. There is much evidence showing that their thicknesses can be substantially accounted for by electrical double layer theory. Such wetting films can be influenced by a third component. For example, they are thinned in the presence of inorganic electrolytes or rendered unstable (or metastable) by prior methylation of the silica surface.Here, we consider the influence of alkyltrimethyl ammonium bromides on the stability of aqueous films on polished fused silica. In particular, the thickness and stability of aqueous films of C₅, C₈, C₁₀ and C₁₆ trimethyl ammonium bromides were studied over a range of surfactant concentrations. Contact angles of the TAB solutions on silica were also measured.The concentration of each cationic surfactant proved important in determining film stability. In dilute solution (well below the bulk CMC) uniform films could be formed only below a critical concentration which varied with the chainlength of the surfactant. The longer the chainlength, the lower was the critical concentration. In this regime, the film thickness decreased significantly with increasing surfactant concentration. This decrease was greater than that found for a simple 1:1 electrolyte such as KCl at the same concentration. As the surfactant concentration increased towards the critical value, the uniform films became increasingly more prone to rupture.Once the critical concentration of each surfactant was exceeded, uniform wetting films on silica could not be formed. The films ruptured immediately regardless of their initial diameter. In this regime, the contact angles, measured through the aqueous phase, increased with TAB concentration up to a maximum value which occurred near the CMC.For C₈, C₁₀ and C₁₆ trimethyl ammonium bromides, wetting films were again formed at concentrations above the CMC. At these concentrations, films were studied in detail only for the C_l6 surfactant. In this case, the wetting films were found to be somewhat thicker than free aqueous films of anionic surfactants formed at similar concentrations and hydrostatic pressures.

---

Zusammenfassung Die Existenz dicker stabiler Wasserfrlme auf SiO₂ (Derjaguin undKussakov (1939)) ist in verschiedenen Laboratorien bestätigt worden. Es gibt zahlreiche Hinweise, nach denen die Dicke durch die elektrische Doppelschichttheorie gedeutet werden kann. Solche benetzenden Filme können durch eine dritte Komponente beeinflußt werden; in Gegenwart anorganischer Elektrolyte werden sie dünner, durch vorhergehende Methylierung der SiO₂-Oberfläche instabil oder metastabil.In der Arbeit wird der Einfluß von Alkyltrimethylammoniumbromiden (C₅, C₈, C₁₀ und C₁₆ auf die Stabilität von Wasserfilmen auf polierten Quarzglasoberflächen untersucht. Die Konzentration der kationischen Tenside auf die Filmstabilität erwies sich als wichtig. In verdünnten Lösungen bilden sich einheitliche Filme nur unter einer kritischen Konzentration, die von der Kettenlänge des Tensids abhängt. Über der kritischen Konzentration bilden sich keine einheitlich benetzenden Filme; sie reißen sofort unabhängig von ihrem ursprünglichen Durchmesser. Es wird versucht, die Ergebnisse auf der Basis einer Doppelschichttheorie zu deuten.

---

---

With 7 figures and 2 tables     

Polymer-metal complexes in polyelectrolyte multilayer films as catalysts for oxidation of toluene

We report on the binding of metal ions (Me(2+); Co(2+) and Cu(2+)) with weak polyelectrolyte multilayers (PEMs), as well as on catalytic activity of PEM-Me(2+) films for oxidation of toluene. Using several types of PEM films constructed using branched polyethyleneimine (BPEI) or quaterinized poly-4-vinylpyridines (QPVPs) as polycations and poly(acrylic acid) (PAA) or poly(styrene sulfonate) (PSS) as polyanions, we found that binding of Co(2+) and Cu(2+) ions with a PEM matrix can occur both through coordination to polycationic amino groups and/or ionic binding to polyacid groups. The amount of metal ions loaded within the film increased linearly with film thickness and was strongly dependent on polyelectrolyte type, film assembly pH, and fraction of permanent charge in polymer chains. Among various PEM-Me(2+) systems, BPEI/PAA-Co(2+) films assembled at pH 8.5 show the best catalytic performance, probably because of the preservation of high mobility of Co(2+) ions coordinated to amino groups of BPEI in these films. With BPEI/PAA-Co(2+) films, we demonstrated that films were highly permeable to reagents and reaction products within hundreds of nanometers of the film bulk; i.e., film catalytic activity increased linearly with layer number up to 30 bilayers and slowed for thicker films.