A repeatable assembling and disassembling electrochemical aptamer cytosensor for ultrasensitive and highly selective detection of human liver cancer cells

In this work, a repeatable assembling and disassembling electrochemical aptamer cytosensor was proposed for the sensitive detection of human liver hepatocellular carcinoma cells (HepG2) based on a dual recognition and signal amplification strategy. A high-affinity thiolated TLS11a aptamer, covalently attached to a gold electrode through Au–thiol interactions, was adopted to recognize and capture the target HepG2 cells. Meanwhile, the G-quadruplex/hemin/aptamer and horseradish peroxidase (HRP) modified gold nanoparticles (G-quadruplex/hemin/aptamer–AuNPs–HRP) nanoprobe was designed. It could be used for electrochemical cytosensing with specific recognition and enzymatic signal amplification of HRP and G-quadruplex/hemin HRP-mimicking DNAzyme. With the nanoprobes as recognizing probes, the HepG2 cancer cells were captured to fabricate an aptamer-cell-nanoprobes sandwich-like superstructure on a gold electrode surface. The proposed electrochemical cytosensor delivered a wide detection range from 1 × 10² to 1 × 10⁷ cells mL⁻¹ and high sensitivity with a low detection limit of 30 cells mL⁻¹. Furthermore, after the electrochemical detection, the activation potential of −0.9 to −1.7 V was performed to break Au–thiol bond and regenerate a bare gold electrode surface, while maintaining the good characteristic of being used repeatedly. The changes of gold electrode behavior after assembling and desorption processes were investigated by electrochemical impedance spectroscopy and cyclic voltammetry techniques. These results indicate that the cytosensor has great potential in disease diagnostic of cancers and opens new insight into the reusable gold electrode with repeatable assembling and disassembling in the electrochemical sensing.     

Electrochemical detection of hydrazine using a highly sensitive nanoporous gold electrode

A facile alloy–dealloy technique performed in aqueous media was employed to prepare a nanoporous gold (NPG) electrode that demonstrated extremely high sensitivity toward hydrazine oxidation. An Ag_∼60Au_∼40 alloy was electrodeposited at a constant potential on sequentially Cr- and Au-deposited indium tin oxide (Au/Cr/ITO) from a bath that contained sulfuric acid, thiourea, HAuCl₄·3H₂O, and AgNO₃. The dealloying step was performed in concentrated HNO₃, where Ag in the alloy was selectively oxidized to leave the NPG structure. The NPG electrode was employed to study the hydrazine oxidation in basic phosphate buffer solution (PBS), and the results were compared with those obtained using the gold nanoparticle (AuNP)-modified ITO (AuNP/ITO) electrode. The NPG electrode demonstrated an unusual surface-confined behavior, which probably resulted from the thin-layer characteristics of the nano-pores. Hydrazine was detected by hydrodynamic chronoamperometry (HCA) at +0.2 V (vs. Ag/AgCl). The steady-state oxidative current exhibited a linear dependence on the hydrazine concentration in the concentration range of 5.00 nM–2.05 mM, and the detection limit was 4.37 nM (σ = 3). This detection limit is the lower than the detection limits reported in the current literature concerning the electrochemical detection of hydrazine. The NPG electrode indeed demonstrates greater stability after hydrazine detection than the AuNP/ITO electrode.     

Reversible fluorescent probe for highly selective and sensitive detection of mercapto biomolecules

A coumarin-derived complex, Hg(2)L(2), was reported as a highly sensitive and selective probe for the detection of mercapto biomolecules in aqueous solution. The addition of Cys to a 99% aqueous solution of Hg(2)L(2) resulted in rapid and remarkable fluorescence OFF-ON (emission at 525 nm) due to the ligand-exchange reaction of Cys with L coordinated to Hg(2+). The increased fluorescence can be completely quenched by Hg(2+) and recovered again by the subsequent addition of Cys. Such a fluorescence OFF-ON circle can be repeated at least 10 times by the alterative addition of Cys and Hg(2+) to the solution of Hg(2)L(2), indicating that it can be used as a convertible and reversible probe for the detection of Cys. The interconversion of Hg(2)L(2) and L via the decomplexation/complexation by the modulation of Cys/Hg(2+) was definitely verified from their crystal structures. Other competitive amino acids without a thiol group cannot induce any fluorescence changes, implying that Hg(2)L(2) can selectively determine mercapto biomolecules. Using confocal fluorescence imaging, L/Hg(2)L(2) as a pair of reversible probes can be further applied to track and monitor the self-detoxification process of Hg(2+) ions in SYS5 cells.     

Subphthalocyanines as fluoro-chromogenic probes for anions and their application to the highly selective and sensitive cyanide detection

The use of a subphthalocyanine derivative as a selective chromo-fluorogenic reporter for the anion cyanide in mixed aqueous solutions is reported.     

Dual-site fluorescent probe for highly selective and sensitive detection of sulfite and biothiols

A dual-site fluorescent probe that could discriminatively respond to Cys and HSO^3- through two emission channels was reported, and it could further applied in imaging biothiols in living cells.     

Porous organic polymer nanotubes as luminescent probe for highly selective and sensitive detection of Fe~(3+)

Two porous organic polymer nanotubes(PNT-2 and PNT-3) were synthesized via Ni-catalyzed Yamamoto reaction, using2,4,6-tris-(4-bromo-phenyl)-[1,3,5]-triazine(TBT) as one monomer, and 2,7-dibromopyrene(DBP) or 1,3,6,8-tetrabromopyrene(TBP) as another monomer. The scanning electron microscope(SEM) images show that both PNT-2 and PNT-3 possess clear hollow tube structures. Luminescent measurements indicate that both PNT-2 and PNT-3 can serve as luminescent probe for highly selective and sensitive detection of Fe~(3+) by luminescent quenching effect. Absorption competition quenching(ACQ) mechanism is also proposed to explain luminescent quenching behavior, i.e., the overlap of the UV-spectra between Fe~(3+) and PNTs causes the energy competition, and therefore leads to luminescent quenching. Moreover, both PNT-2 and PNT-3 still show high selectivity and sensitivity for sensing Fe~(3+) in 10% ethanol aqueous solution, which means that the two porous PNTs are promising candidates as luminescent probes for detecting Fe~(3+) in practical applications.     

A highly sensitive and selective chemosensor for cyanide

A highly sensitive and selective cyanide chemosensor based on fused indoline and benzooxazine fragment was reported with fast response. The detection of cyanide was performed via the nucleophilic attack of cyanide anion on the oxazine. (1)H NMR and MS studies confirmed the cleavage of C-O bond of oxazine and binding of cyanide to the spiro center of oxazine. The specific reaction results in high selectivity for cyanide ion. Addition of cyanide anion to the oxazine in MeCN/H(2)O solution results in a loss in absorbance at 343 nm and an increase in new absorbance at 411 nm, thus resulting in obvious color changes. Cyanide can be detected down to 1 microM levels in a fast response of less than 30s with no interference of other anionic species. The cyanide detection method should have potential application in a variety of settings requiring rapid and accurate analysis of cyanide anion for drinking and fresh water.     

Cyanine dye-based chromofluorescent probe for highly sensitive and selective detection of cyanide in water

Cyanine dye Cy5 was used to be a probe for highly selective detection of trace cyanide in water by using a convenient two-phase strategy. The detection limit of both the fluorescent and colorimetric assay for cyanide is below 1.9 μM, the maximal allowance level for drinking water set by the World Health Organization.     

DNAzyme-based fluorescent microarray for highly selective and sensitive detection of lead(II)

A facile microarray-based fluorescent sensor for the detection of lead (II) was developed based on the catalytic cleavages of the substrates by a DNAzyme upon its binding to Pb(2+). The release of the fluorophore labelled substrates resulted in the decrease of fluorescence intensity. The sensor had a quantifiable detection range from 1 nM to 1 μM and a selectivity of >20 fold for Pb(2+) over other metal ions.     

Hybridization chain reaction-based aptameric system for the highly selective and sensitive detection of protein

We introduce here a novel assay for the detection of platelet-derived growth factor BB (PDGF-BB) via hybridization chain reaction (HCR) based on an aptameric system, where stable DNA monomers assemble only upon exposure to a target PDGF-BB aptamer. In this process, two complementary stable species of biotinylated DNA hairpins coexist in solution until the introduction of initiator aptamer strands triggers a cascade of hybridization events that yields nicked double helices analogous to alternating copolymers. In detail, the aptamer firstly opens the hairpins in the solution, creating long concatemers, and then reacts with the antibody captured PDGF-BB on the well surface. Moreover, several experimental conditions including different PDGF-BB aptamers, the spacer length of the selected aptamer and hairpin, etc. are investigated and optimized. Our results show that the coupling of HCR to aptamer triggers for the amplification detection of PDGF-BB achieves a better performance in the fluorescence detection of PDGF-BB as compared to the traditional antibody-antigen-aptamer assays. Upon modification, the approach presented herein could be extended to detect other types of targets. We believe such advancements will represent a significant step towards improved diagnostics and more personalized medical treatment and environmental monitoring.     

A rhodamine-cyclen conjugate as a highly sensitive and selective fluorescent chemosensor for Hg(II)

A rhodamine-cyclen conjugate (1) behaves as a highly sensitive and selective fluorescent chemosensor for Hg(2+). The high emission selectivity is due to the formation of 1-Hg(2+) 1:2 complex leading to spirocycle opening of 1.     

A novel signal-amplified electrochemical aptasensor based on supersandwich G-quadruplex DNAzyme for highly sensitive cancer cell detection

A novel electrochemical biosensor for cancer cell detection was developed based on aptamer-based competition and supersandwich G-quadruplex DNAzyme amplification strategy. Due to the stronger affinity between the aptamer and cancer cells than that with its complementary oligonucleotide, the complementary oligonucleotide will be facilely replaced. As a consequence, we can detect cancer cells indirectly by detecting the releasing DNA which is proportional to the concentration of K562 cells. Through the supersandwich G-quadruplex DNAzyme amplification strategy, the sensitivity can be dramatically enhanced with detection limit down to 14 cells.     

Development of highly selective and sensitive probes for hydrogen

Probes that react specifically with hydrogen peroxide to release chromophoric or fluorescent reporter groups were designed and synthesized.     

A highly sensitive and selective immunoassay for the detection of tetrabromobisphenol A in soil and sediment

Tetrabromobisphenol A is the most widely used brominated flame retardant. A sensitive and selective enzyme-linked immunosorbent assay (ELISA) for the detection of tetrabromobisphenol A was developed. The limit of detection and the inhibition half-maximum concentration of tetrabromobisphenol A in phosphate buffered saline with 10% methanol were 0.05 and 0.87 ng mL⁻¹, respectively. Cross-reactivity values of the ELISA with a set of important brominated flame retardants including tetrabromobisphenol A-bis(2,3-dibromopropylether), 2,2′,6,6′-tetrabromobisphenol A diallyl ether, hexabromocyclododecane, 1,2-bis(pentabromodiphenyl) ethane, 1,2-bis(2,4,6 tribromophenoxy) ethane, bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate, 2-ethylhexyl-2,3,4,5-tetrabromobenzoate, and polybrominated diphenyl ethers were <0.05%. Concentrations of tetrabromobisphenol A determined by ELISA in the soils from farmlands, the soils from an e-waste recycling site, and the sediments of a canal were in the range of non-detectable–5.6 ng g⁻¹, 26–104 ng g⁻¹ and 0.3–22 ng g⁻¹ dw, respectively, indicating the ubiquitous pollution of tetrabromobisphenol A. The results of this assay for 16 real world samples agreed well with those of the liquid chromatography–tandem mass spectrometry method, indicating this ELISA is suitable for screening of tetrabromobisphenol A in environmental matrices.     

A label-free DNA reduced graphene oxide-based fluorescent sensor for highly sensitive and selective detection of hemin

G-quadruplex structure aptamer (PS2.M) can capture acridine orange (AO) from reduced graphene oxide (rGO). When the AO-PS2.M/rGO mixture is incubated with hemin, the specific binding of hemin with PS2.M results in a release of AO from PS2.M and return of AO back to rGO. Based on the quenching of fluorescence, the target hemin was detected sensitively and selectively, giving a detection limit of 50 nM.     

A new ESIPT-based fluorescent probe for highly selective and sensitive detection of HClO in aqueous solution

A new ESIPT-based fluorescent probe, PHC2, for the detection of hypochlorous acid has been rationally designed and developed. Endowed by the specific reaction between hypochlorous acid and phenyl azo group, PHC2 features high degree of selectivity and sensitivity for HClO with a low detection limit (13.2 nM) under physiological conditions in neutral aqueous solution.     

New sensitive fluorophores for selective DNA detection

4,7-Disubstituted benzothiadiazoles containing 1-arylethynyl and 4-methoxyphenyl groups are selective photoluminescent "light up" probes to duplex DNA with unprecedented sensibility in both spectrophotometric and spectrofluorimetric measurements.     

A highly selective and sensitive method for identification of gold

Summary A highly sensitive method for detection of gold, almost free from interferences, is described. The reaction is performed on a short column of anion-exchange resin Dowex 1 X8 (100–200 mesh) in iodide form. To the test solution containing 0.13g/ml of gold(III) is added Sb-solution (weight ratio Au: Sb=1 200) and the mixture is then passed through the resin, followed by 1N NaOH. A crimson colour appearing within 2–3 min indicate gold. Many metal ions, including Pt-metals, Tl(I), Tl(III), Ir(IV), In (III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) do not interfere. In the presence of 50-fold excess of Ag(I) or Bi(III) there is no colour because of the formation of a precipitate on the resin.

---

Zusammenfassung Ein hochempfindliches und selektives Verfahren zum qualitativen Gold-nachweis wurde vorgeschlagen. Die Reaktion wird in einer 10 mm hohen Anionenaustauschersäule Dowex 1 X8 in Jodidform durchgeführt. Zu der aufgetragenen Probelösung fügt man Sb(III) und (V) (im Verhältnis Au: Sb= 1 200) und versetzt nachher auf der Säule mit 1-n NaOH. Nach einigen Minuten entsteht um die Harzkörner eine himbeerrote Färbung. Pt-Metalle, Tl(I), Tl(III), Ir(IV), In(III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) stören nicht; Ag(I) und Bi(III) stören gleichfalls nicht, solange sie in nicht mehr als 50facher Menge neben Gold vorliegen. Bei höheren Konzentrationen setzen sie sich als unlösliche Jodide um die Harzkörner ab und stören. Die Nachweisgrenze der Reaktion liegt bei 0,13g/ml.

     

Bowl-shaped hollow N-doped carbon as an electrochemical platform for the highly selective and sensitive electrochemical detection of isoprenaline in pharmaceutical injection

In this study, bowl-shaped N-doped hollow carbon sphere-containing mesoporous nanomaterials (BNHC) were used for the ultrasensitive electrochemical detection of isoprenaline (ISOP). The linear ranges of the BNHC-based sensor were as follows: 0.05 – 15 μM; 15 – 70 μM, with the limit of detection (LOD) of 6.8 nM. And the BNHC-based electrochemical sensor showed a good current response to ISOP and maintained 95.6 % of the initial current after 30 days of storage. Notably, when the BNHC-modified sensor was used to detect the actual ISOP injection and urine samples, the sensor exhibited satisfactory recovery.