基于溶胶-凝胶壳聚糖／SiO2杂化材料的安培型葡萄糖生物传感器

近年来，基于溶胶-凝胶技术的有机/无机杂化复合材料由于具有有机物的柔性和易修饰性，以及无机物的刚性和稳定性等，因此有利于保持生物分子的活性和生物传感器的研制．壳聚糖(CS)具有易成膜性和生物相容性，其在生物传感器中的研究已受到重视．本文通过原位溶胶-凝胶(Sol-gel)技术，     

溶胶-凝胶法制备壳聚糖/SiO2杂化材料

以正丁酐（Butyric anhydride)、壳聚糖(Chitosan）、甲基丙烯酰氧基丙基三甲氧基硅烷（MPTMS）、正硅酸乙酯（TEOS）为原料,采用迈克尔加成反应合成了丁酰壳聚糖-MPTMS,配合酸催化sol-gel过程,制备了透明的壳聚糖/SiO2杂化材料,FTIR表征了杂化材料的结构。TGA,SEM以及力学性能测试结果表明,杂化材料的成型工艺对材料的表面形貌、热分解温度以及力学性能的影响显著。     

溶胶-凝胶壳聚糖/二氧化硅杂化复合膜固定辣根过氧化酶的H2O2电化学生物传感器的研制

利用溶胶 凝胶法制备壳聚糖 二氧化硅有机无机复合杂化膜,用于对辣根过氧化酶进行固定,制得测定H2O2的电流型生物传感器。以1mmol/LK4Fe(CN)6作为电子媒介体。研究了各种因素如壳聚糖与二氧化硅的比率、pH、温度、工作电位等对传感器响应电流的影响。计时电流法测定H2O2的线性范围为2.0×10-6～6.8×10-4mol/L,检出限为8.0×10-7mol/L。测得酶催化动力学参数米氏常数Km=0 87mmol/L。用该法对实际样品进行了测定。     

高稳定性安培型葡萄糖生物传感器的研究

采用有机改性溶胶凝胶-聚乙烯醇(Ormosil-PVA)包埋葡萄糖氧化酶,制备普鲁士蓝修饰玻碳电极,并基于此制备了安培型葡萄糖生物传感器。以含有FeCl3,K3Fe(CN)6和EDTA的溶液为沉积液,通过循环伏安电沉积法制备了高稳定性的普鲁士蓝修饰电极。考察了扫描电位范围、外加电位、pH和温度等因素对传感器的影响。葡萄糖浓度在20μmol/L~2 mmol/L范围内与响应电流呈线性关系,相关系数R=0.9965,以3倍空白值的标准偏差计算此传感器的检出限为8.1μmol/L。其中,在低浓度(20~100μmol/L)范围内,电流与浓度也呈良好的线性关系(R=0.9938)。     

基于纳米复合材料/壳聚糖膜的葡萄糖生物传感器研究

采用纳米普鲁士蓝/金纳米粒子/壳聚糖(nano-PB/AuNPs/Chit)复合膜固定葡萄糖氧化酶(GOD)构建新型葡萄糖生物传感器。通过电化学阻抗谱以及电流-时间曲线法(I-t)研究了传感器的电化学特性。结果表明,传感器在葡萄糖浓度为0.01～1.0 mmol/L范围内呈线性,响应灵敏度为68.15μA.(mmol/L)-1.cm-2,表观米氏常数为5.1 mmol/L。该传感器可用于糖尿病人血糖的测定。     

壳聚糖/SiO2杂化材料膜制备的研究

由甲壳质制得不同脱乙酰度、粘度的壳聚糖;制成的壳聚糖盐酸溶液与正硅酸乙酯在不同的条件下混合,得到一种杂化材料;通过红外光谱检测和物理性质观测到部分产物有新键形成;反应温度、时间ｐＨ值对产物形成膜的物理和机械性质有影响;与壳聚糖膜相比,部分杂化膜不溶解于稀酸溶液。     

掺杂纳米普鲁士蓝溶胶-凝胶修饰葡萄糖生物传感器

采用溶胶-凝胶法制备了纳米普鲁士蓝微粒,将含纳米普鲁士蓝微粒的TiO2溶胶-凝胶固定在玻碳电极表面得到纳米普鲁士蓝修饰电极,该电极对H2O2产生灵敏的响应,线性范围为0．5～400μmoL／L,较常规普鲁士蓝修饰电极(线性范围为25～500μmol／L)灵敏。电极表面再用溶胶．凝胶法固定葡萄糖氧化酶后构建了葡萄糖生物传感器,响应范围0～20mmoL／L,葡萄糖氧化酶表观米氏常数为8．04mmoL／L。实验表明,该法适合于批量制作高灵敏和高重现性的生物传感器。     

溶胶-凝胶法制备光固化聚氨酯丙烯酸酯杂化材料的研究

以溶胶-凝肢法制备的硅溶胶为无机相,聚氨酯丙烯酸酯为有机相,以γ-甲基丙烽酰氧丙基三甲氧基硅烷(TMSPM)为两相间的偶联剂,制得了光固化杂化材料。研究了未固化的杂化体系的稳定性问题,并对其进行了结构表征和性能研究。无机相与有机相通过共价键相连。使得杂化体系光固化膜高硬度的获得并没有以柔韧性的损失为代价。在无机物含量较低时,聚氨酯丙烯酸酯／二氧化硅杂化体系先固化膜的耐磨性略有提高。     

光固化环氧丙烯酸酯/SiO2杂化材料的研究

用FTIR、SEM、DSC和TGA表征了光固化环氧丙烯酸酯／SiO2杂化材料[(EA-TMSPM)／SiO2]，研究了盐酸、γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)和无机物浓度对(EA-TMSPM)／SiO2结构与性能的影响。结果表明，无机物浓度高的(EA-TMSPM)／SiO2杂化体系中SiO2粒子尺寸略大于无机物浓度低的体系；盐酸和无机物浓度的增加，都可以增强杂化材料的耐磨性。     

普鲁士蓝修饰电极结合硅溶胶-凝胶技术制备高灵敏葡萄糖传感器

基于普鲁士蓝修饰玻碳电极结合二氧化硅溶胶 凝胶固定化酶技术构造具有“三明治”式结构的酶电极。考察了酶电极对葡萄糖的电化学响应以及操作条件。结果表明 :所制备的传感器在pH 6 .5 ,电位为- 0 .0 5V条件下对葡萄糖在 0～ 5mmol/L呈线性响应 ,响应时间为 12s ,检出限为 0 .0 2mmol/L ,灵敏度高达1 182 μA/ (mmol·L-1)。传感器的稳定性好 ,4 5d其响应值仍保持 90 %。     

Organically Modified Sol‐Gel/Chitosan Composite Based Glucose Biosensor

A new type of organically modified sol‐gel/chitosan composite material was developed and used for the construction of glucose biosensor. This material provided good biocompatibility and the stabilizing microenvironment around the enzyme. Ferrocene was immobilized on the surface of glassy carbon electrode as a mediator. The characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The effects of enzyme‐loading, buffer pH, applied potential and several interferences on the response of the enzyme electrode were investigated. The simple and low‐cost glucose biosensor exhibited high sensitivity and good stability.     

High-Sensitive Glucose Biosensor Based on Ionic Liquid Doped Polyaniline/Prussian Blue Composite Film

The Prussian blue/ionic liquid-polyaniline/multiwall carbon nanotubes (PB/IL-PANI/MWNTs) composite film was fabricated by using cyclic voltammetry. The ion liquid acting as a lubricating agent, could enhance the electron delocalization degree and reduce the struc-tural defects of the polyaniline. The surface morphology of the composite film revealed that the PB nanoparticles have smaller size than that in pure PB film. Due to the introduction of ion liquid, the PB/IL-PANI/MWNTs composite film showed wonderful synergistic effect which can remarkably enhance sensitivity, expand linear range and broaden acidic adapt-ability for hydrogen peroxide detection. The composite film demonstrated good stability in neutral solution contrast to pure PB film, with a linear range from 2.5 μmol/L to 0.5 mmol/Land a high sensitivity of 736.8 μA·(mmol/L)^-1·cm^-2 for H₂O₂ detection. Based on the com-posite film, an amperometric glucose biosensor was then fabricated by immobilizing glucose oxidase. Under the optimal conditions, the biosensor also exhibits excellent response to glucose with the linear range from 12.5 μmol/L to 1.75 mmol/L and a high sensitivity of 94.79 μA (mmol/L)^-1·cm^-2 for H₂O₂. The detection limit was estimated 1.1 μmol/L. The resulting biosensor was applied to detect the blood sugar in human serum samples without any pretreatment, and the results were comparatively in agreement with the clinical assay.     

Preparation of GOD/Sol‐Gel Silica Film on Prussian Blue Modified Electrode for Glucose Biosensor Application

A novel amperometric glucose biosensor was fabricated by in situ incorporating glucose oxidase (GOD) within the sol‐gel silica film on a Prussian blue (PB) modified electrode. The method is simple and controllable, which combined the merits of in situ immobilizing biomolecules in sol‐gel silica film by electrochemical method and the synergic catalysis effects of PB and GOD molecules. Scanning electron microscopy (SEM) showed that the GOD/sol‐gel silica film was homogeneous with a large number of three‐dimensional nanopores, which not only enhanced mass transport, but also maintained the active configuration of the enzyme molecule and prevented the leakage of enzyme, therefore improved the stability and sensitivity of the biosensor. The fabricated biosensor showed fast response time (10 s), high sensitivity (26.6 mA cm^?2 M^?1), long‐term stability, good suppression of interference, and linear range of 0.01 mM–5.8 mM with a low detection limit of 0.94 μM for the detection of glucose. In addition, the biosensor was successfully applied to determine glucose in human serum samples.     

Unadulterated Glucose Biosensor Based on Direct Electron Transfer of Glucose Oxidase Encapsulated Chitosan Modified Glassy Carbon Electrode

Glucose oxidase (GOD) was encapsulated in chitosan matrix and immobilized on a glassy carbon electrode, achieving direct electron transfer (DET) reaction between GOD and electrode without any nano‐material. On basis of such DET, a novel glucose biosensor was fabricated for direct bioelectrochemical sensing without any electron‐mediator. GOD incorporated in chitosan films gave a pair of stable, well‐defined, and quasireversible cyclic voltammetric peaks at about ?0.284 (E_pa) and ?0.338 V (E_pc) vs. Ag/AgCl electrode in phosphate buffers. And the peak is located at the potentials characteristic of FAD redox couples of the proteins. The electrochemical parameters, such as midpoint potential (E_1/2) and apparent heterogeneous electron‐transfer rate constants (k_s) were estimated to ?0.311 V and 1.79 s^?1 by voltammetry, respectively. Experimental results indicate that the encapsulated GOD retains its catalytic activity for the oxidation of glucose. Such a GOD encapsulated chitosan based biosensor revealed a relatively rapid response time of less than 2 min, and a sufficient linear detection range for glucose concentration, from 0.60 to 2.80 mmol L^?1 with a detection limit of 0.10 mmol L^?1 and electrode sensitivity of 0.233 μA mmol^?1. The relative standard deviation (RSD) is under 3.2% (n=7) for the determination of practical serum samples. The biologic compounds probably existed in the sample, such as ascorbic acid, uric acid, dopamine, and epinephrine, do not affect the determination of glucose. The proposed method is satisfactory to the determination of human serum samples compared with the routine hexokinase method. Both the unique electrical property and biocompatibility of chitosan enable the construction of a good bio‐sensing platform for achieved DET of GOD and developed the third‐generation glucose biosensors.     

A Chemiluminescence Optical Fiber Glucose Biosensor Based on Co-immobilizing Glucose Oxidase and Horseradish Peroxidase in a Sol-gel Film

IntroductionIn recent years chemiluminescence (CL)biosensor prepared by immobilization of a sensitivereagent such as peroxidase or oxidase onto a solidmatrix has attracted much attention due to the highsensitivity of the chemiluminescent reaction of thesensitive reagent even with a simple instrument.Generally,CL biosensors can be divided into twocategories.One consists of hydrogen peroxide sen-sors prepared by immobilizing a kind of peroxidaseonto a suitable solid support[1,2 ] ,and the immo…     

New Nanocomposite Based on Prussian Blue Nanoparticles/Carbon Nanotubes/Chitosan and Its Application for Assembling of Amperometric Glucose Biosensor

Abstract

A new nanocomposite was developed by combination of prussian blue (PB) nanoparticles and multiwalled carbon nanotubes (MWNTs) in the matrix of biopolymer chitosan (CHIT). The PB and MWNTs had a synergistic electrocatalytic effect toward the reduction of hydrogen peroxide. The CHIT/MWNTs/PB nanocomposite‐modified glassy carbon (GC) electrode could amplify the reduction current of hydrogen peroxide by ～35 times compared with that of CHIT/MWNTs/GC electrode and reduce the response time from ～60 s for CHIT/PB/GC to 3 s. Besides, the CHIT/MWNTs/PB nanocomposite‐modified GC electrode could reduce hydrogen peroxide at a much lower applied potential and inhibit the responses of interferents such as ascorbic acid (AA) uric acid (UA) and acetaminophen (AC). With glucose oxidase (GOx) as an enzyme model, a new glucose biosensor was fabricated. The biosensor exhibited excellent sensitivity (the detection limit is down to 2.5 µM), fast response time (less than 5 s), wide linear range (from 4 µM to 2 mM), and good selection.     

Development of a Novel Silver Nanoparticles-Enhanced Screen-Printed Amperometric Glucose Biosensor

Abstract

A disposable glucose biosensor is developed by immobilizing glucose oxidase into silver nanoparticles-doped silica sol-gel and polyvinyl alcohol hybrid film on a Prussian blue-modified screen-printed electrode. The silver nanoparticles-enhanced biosensor shows a linear amperometric response to glucose from 1.25 × 10^?5 to 2.56 × 10^?3 with a sensitivity of 20.09 mA M^?1 cm^?2, which is almost double that of the biosensors without silver nanoparticles. The immobilized glucose oxidase retained 91% of its original activity after 30 days of storage in phosphate buffer (pH 6.9; 0.1 M) at 4°C. Blood glucose in a rabbit serum sample was successfully measured with the biosensor.     

硅溶胶-凝胶包埋纳米金和酶的葡萄糖生物传感器

采用溶胶-凝胶技术将金纳米粒子和葡萄糖氧化酶一次性固定于硅溶胶-凝胶的网络结构中,制备了葡萄糖生物电化学传感器并优化了传感器的制备条件。酶电极对葡萄糖具有良好的电化学响应,葡萄糖浓度在0.02~2.0 mmol/L范围内和催化电流呈线性关系,检出限为0.005 mmol/L。酶电极在4 ℃下贮存100 d后对葡萄糖的响应仅下降8%。该酶电极灵敏度高、响应快、稳定性好。     

壳聚糖-纳米金-葡萄糖氧化酶生物传感器的制备及其应用于葡萄糖的测定

采用了一种简便快捷的电沉积方法制备了壳聚糖-纳米金复合膜并应用于葡萄糖生物传感器的构建.氯金酸和壳聚糖的混合液在玻碳电极表面电化学还原为金纳米粒子,再将葡萄糖氧化酶通过戊二醛交联的方式固定在纳米金复合膜修饰的玻碳电极表面,制成一种新型的葡萄糖氧化酶生物传感器.该传感器对葡萄糖的响应十分快速,在5 S内即达到平衡.测定葡萄糖的线性范围为20μmol·L-1～5 mmol·L-1,检出限(3S/N)为12μmol·L-1.