Silver-particle-based surface-enhanced resonance Raman scattering spectroscopy for biomolecular sensing and recognition

We demonstrate in this work that 2-μm-sized Ag (μAg) powders can be used as a core material for constructing biomolecular sensing/recognition units operating via surface-enhanced resonance Raman scattering (SERRS). This is possible because μAg powders are very efficient substrates for both the diffuse reflectance IR and the surface-enhanced Raman scattering–SERRS spectroscopic characterization of molecular adsorbates prepared in a similar manner on silver surfaces. Besides, the agglomeration of μAg particles in a buffer solution can be prevented by the layer-by-layer deposition of cationic and anionic polyelectrolytes such as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA). In this particular study, we used rhodamine B isothiocyanate (RhBITC) as a SERRS marker molecule, and μAg powders adsorbed consecutively with RhBITC and PAH–PAA bilayers were finally derivatized with biotinylated poly(l-lysine). On the basis of the nature of the SERRS peaks of RhBITC, those μAg powders were confirmed to selectively recognize streptavidin molecules down to concentrations of 10⁻¹⁰ g mL⁻¹. Since a number of different molecules can be used as SERS–SERRS marker molecules, the present method proves to be an invaluable tool for multiplex biomolecular sensing/recognition via SERS and SERRS.     

Nanoparticle-mirror sandwich substrates for surface-enhanced Raman scattering

Sandwich surface-enhanced Raman scattering (SERS) substrates (3S) utilizing coupling between continuous metal films and plasmonic particles were fabricated using silver mirrors, electrochemically roughened films, and various sizes of silver nanoparticles. The effect of excitation wavelength and nanoparticle size on SERS spectra of poly(vinylpyridine), selected as a model compound, was studied to determine the optimum conditions for the strongest SERS signal. The Raman enhancement resulted from the plasmon coupling of silver nanoparticles to the underlying continuous film as well as the lateral plasmon coupling between the silver nanoparticles. The formation of the charge transfer complex was also observed. The 3S configuration was used to obtain SERS spectra of dipicolinic acid (DPA), a chemical signature for Bacillus anthracis.     

Novel fabrication of Ag thin film on glass for efficient surface-enhanced Raman scattering

This paper describes a very simple electroless-plating method used to prepare optically tunable nanostructured Ag films. Very stable Ag films can be reproducibly fabricated simply by soaking glass substrates in ethanolic solutions of AgNO3 and butylamine. The grain size of silver can be readily controlled to range from 20 to 150 nm, and these nanostructural features correlated well with their UV/vis absorption characteristics, as well as with their surface-enhanced Raman scattering (SERS) activities. It is also very advantageous that the Ag films prepared exhibit very even SERS activity over an area up to hundreds thousand square-micrometers, and the enhancement factor estimated using benzenethiol as a prototype adsorbate reaches approximately 2 x 10(5). Since the proposed method is cost-effective and is suitable for the mass production of diverse Ag films irrespective of the shapes of the underlying substrates, it is expected to play a significant role in the development of surface plasmon-based analytical devices.     

Nanoparticle-based substrates for surface-enhanced Raman scattering detection of bacterial spores

The development of ultrasensitive and rapid methods for the detection of bacterial spores is important for medical diagnostics of infectious diseases. While Surface-Enhanced Raman Spectroscopic (SERS) techniques have been increasingly demonstrated for achieving this goal, a key challenge is the development of sensitive and stable SERS substrates or probes. This Minireview highlights recent progress in exploring metal nanoparticle-based substrates, especially gold nanoparticle-based substrates, for the detection of biomarkers released from bacterial spores. One recent example involves assemblies of gold nanoparticles on a gold substrate for the highly sensitive detection of dipicolinic acid (DPA), a biomarker for bacterial spores such as Bacillus anthracis. This type of substrate exploits a strong SERS effect produced by the particle-particle and particle-substrate plasmonic coupling. It is capable of accurate speciation of the biomarker but also selective detection under various reactive or non-reactive conditions. In the case of detecting Bacillus subtilis spores, the limit of detection is quite comparable (0.1 ppb for DPA, and 1.5 × 10(9) spores per L (or 2.5 × 10(-14) M)) with those obtained using silver nanoparticle-based substrates. Implications of the recent findings for improving the gold nanoparticle-based SERS substrates with ultrahigh sensitivity for the detection of bacterial spores are also discussed.     

Silver-particle-based surface-enhanced Raman scattering spectroscopy for biomolecular sensing and recognition

In this study, we demonstrate that 2-microm-sized Ag (microAg) powders can be used as a core material for constructing molecular sensing/recognition units operating via surface-enhanced Raman scattering (SERS). This is possible because microAg powders are very efficient substrates for both the infrared and Raman-spectroscopic characterization of molecular adsorbates prepared in a similar manner on silver surfaces; we can obtain an infrared spectrum of organic molecules adsorbed on microAg particles with a very high signal-to-noise ratio by diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), and the Raman spectrum of organic monolayers on powdered silver is an SERS spectrum. The agglomeration of microAg particles in a highly concentrated buffer solution could be prevented by the layer-by-layer deposition of cationic and anionic polyelectrolytes such as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA). In fact, prior to depositing PAA and PAH, 4-aminobenzenethiol (4-ABT) was assembled on the surfaces of the microAg particles as SERS markers. Because of the presence of amine groups of 4-ABT, PAA could be readily deposited on the microAg particles. On the other hand, the outermost PAA layer could also be derivatized with biotin-derivatized poly(L-lysine). The nonspecific interaction of poly(L-lysine) with proteins could be suppressed by grafting poly(ethylene glycol) into the biotin-derivatized poly(L-lysine) molecules. On the basis of the nature of the SERS peaks of 4-ABT, it was confirmed that these biotinylated microAg powders were effective in selectively recognizing the streptavidin arrays. Because a number of different molecules can be used as SERS-marker molecules, such as probable 4-ABT, commercially available microAg powders must be a prospective material in molecular sensing/recognition, particularly via SERS.     

Plasma-induced formation of Ag nanodots for ultra-high-enhancement surface-enhanced Raman scattering substrates

We report here plasma-induced formation of Ag nanostructures for surface-enhanced Raman scattering (SERS) applications. An array of uniform Ag patterned structures of 150 nm diameter was first fabricated on a silicon substrate with imprint lithography; then the substrate was further treated with an oxygen plasma to fracture the patterned structures into clusters of smaller, interconnected, closely packed Ag nanoparticles (20-60 nm) and redeposited Ag nanodots ( approximately 10 nm) between the clusters. The substrate thus formed had a uniform ultrahigh SERS enhancement factor (1010) over the entire substrate for 4-mercaptophenol molecules. By comparison, Au patterned structures fabricated with the same method did not undergo such a morphological change after the plasma treatment and showed no enhancement of Raman scattering.     

Fourier transform surface-enhanced Raman scattering of single-layer nucleolipid Langmuir-Blodgett films on silver island film substrates

Surface-enhanced Raman scattering (SERS) spectra of four amphiphilic nucleolipids in single-layer Langmuir-Blodgett (LB) films deposited on silver island film substrates from pure water and complementary nucleotide-containing subphase and corresponding powder normal Raman spectra were obtained. The analysis of these spectra indicates that the SERS effect is mainly caused by a charge-transfer mechanism, and only the nucleobase headgroup moieties and complementary bases combined with them through hydrogen bonds, which are directly in contact with the silver island film substrates, could be enhanced. For the amphiphilic nucleolipids with the identical nucleobase headgroups, the SERS spectra of the LB films are similar, implying that the orientations of these nucleobase moieties on the silver substrates are analogous. However, the nucleobase takes different orientations on the silver substrates before and after complementary binding. The nucleobases in the LB films deposited from pure water are nearly lying flat on the silver surface, while the complementary binding pairs transferred from the air/water interface tend to take an end-on orientation on the metal surface.     

Patterning of triblock copolymer film and its application for surface-enhanced Raman scattering

In this paper,microphase behavior of an ABC triblock copolymer,polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide),namely PS-b-P2VP-b-PEO,was systematically studied during spin-coating and solvent vapor annealing based on various parameters,including the types of the solvent,spin speed and thickness.The morphological features and the microdomain location of the different blocks were characterized by atomic force microscope (AFM) and high resolution transmission electron microscopy (HRTEM).With increasing thickness,the order-order transition from nanopores array to the pattern of nanostripes was observed due to microdomain coarsening.These processes of pattern transformation were based on the selectivity of toluene for different blocks and on the contact time between solvent molecules and the three blocks.This work provides different templates for preparation of gold nanoparticle array on silicon wafer,which can be adopted as an active surface-enhanced Raman scattering (SERS) substrate for poly(3-hexylthiophene) (P3HT).     

Partition layer-modified substrates for reversible surface-enhanced Raman scattering detection of polycyclic aromatic hydrocarbons

Herein, we present progress towards an analytical sensor for polycyclic aromatic hydrocarbons (PAHs) using surface-enhanced Raman scattering (SERS) on partition layer-modified nanostructured substrates. Specifically, a 1-decanethiol monolayer has been assembled on a silver film over nanospheres substrate to concentrate PAHs within the zone of SERS detection. Both anthracene and pyrene were detected with limits of detection at 300 and 700 pM, respectively. The measured SERS spectra allowed for easy distinction of the two PAH compounds, due to varying peak locations, and insight into the partitioning mechanism. Additionally, exposure to a common environmental interferant, Suwannee River fulvic acid, did not impede the measurement of the PAHs, and the sensor is reusable after a short exposure to 1-octanol. Finally, the utility of this sensing platform for PAH detection was compared to that achievable for other classes of organic pollutants such as polychlorinated biphenyls and polybrominated diphenyl ethers. Figure SERS detection of polycyclic aromatic hydrocarbons facilitated via partition layer modified substrates.

Quantitative analysis of methyl green using surface-enhanced resonance Raman scattering

Surface-enhanced resonance Raman scattering (SERRS) spectra of aqueous solutions of the triphenylmethane dye methyl green have been obtained for the first time by use of citrate-reduced silver colloids and a laser excitation wavelength of 632.8 nm. Given the highly fluorescent nature of the analyte, which precluded collection of normal Raman spectra of the dye in solution and powdered state, it was highly encouraging that SERRS spectra showed no fluorescence due to quenching by the silver sol. The pH conditions for SERRS were optimised over the pH range 0.5–10 and the biggest enhancement for SERRS of this charged dye was found to be at pH 2.02, thus this condition was used for quantitative analysis. SERRS was found to be highly sensitive and enabled quantitative determination of methyl green over the range 10⁻⁹ to 10⁻⁷ mol dm⁻³. Good fits to correlation coefficients were obtained over this range using the areas under the vibrational bands at 1615 and 737 cm⁻¹. Finally, a limit of detection of 83 ppb was calculated, demonstrating the sensitivity of the technique.     

Gold nanoparticle embedded, self-sustained chitosan films as substrates for surface-enhanced Raman scattering

In this work, self-sustained, biocompatible, biodegradable films containing gold nanostructures have been fabricated for potential application in nanobioscience and ultrasensitive chemical and biochemical analysis. We report a novel synthesis of gold nanoparticles mediated by the biopolymer chitosan. Self-supporting thin films are formed from the resultant gold-chitosan nanocomposite solutions and characterized by UV-visible surface plasmon absorption, transmission electron microscopy, atomic force microscopy, infrared absorption, and Raman scattering measurements. Results demonstrate control over the size and distribution of the nanoparticles produced, which is promising for several applications, including the development of biosensors. As a proof of principle, we demonstrate that gold-chitosan films can be employed in trace analysis using surface-enhanced Raman scattering.     

Planar monolithic porous polymer layers functionalized with gold nanoparticles as large-area substrates for sensitive surface-enhanced Raman scattering sensing of bacteria

For the first time, large-area surface-enhanced Raman scattering sensing active substrates using porous polymer monolithic layers have been successfully prepared. Our approach includes a simple photoinitiated polymerization process using glycidyl methacrylate and ethylene dimethacrylate in a glass mold, followed by a chemical reaction of the epoxy functionalities leading to thiols, and the attachment of preformed gold nanoparticles. We demonstrated that this very simple process produced uniform and reproducible large area surfaces that significantly enhance sensitivity of Raman spectroscopy. Experiments were also carried out that confirmed preferential adsorption of living bacteria Escherichia coli from a very dilute solution on the surface of the monolithic layer, and immediate detection of the captured microorganisms using the SERS spectrum.     

Green synthesis of Au nanoparticles immobilized on halloysite nanotubes for surface-enhanced Raman scattering substrates

A facile and green route was introduced to synthesize Au nanoparticles immobilized on halloysite nanotubes (AuNPs/HNTs) used for surface-enhanced Raman scattering substrates. The naturally occurring HNTs were firstly functionalized with a large amount of -NH(2) groups by N-(β-aminoethyl)-γ-aminopropyl trimethoxysilane (AEAPTES), which possesses one lone electron pair and will "anchor" Au ions to form a chelate complex. Then, with the addition of tea polyphenols (TP), the Au ions were reduced on the surface of the previously formed Au-NH(2) chelate complex to form AuNPs. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM) observations indicate that a large amount of AuNPs were synthesized on HNTs. The AuNPs are irregularly spherical and densely dispersed on HNTs and the diameter of the nanoparticles varies from 20 to 40 nm. The interactions between AuNPs and -NH(2) groups were verified by X-ray photoelectron spectroscopy (XPS) and the results showed that the functional groups can "anchor" AuNPs through the chelating effect. The as-prepared AuNPs/HNTs nanomaterials with several nanometers gaps among nanoparticles were used as a unique surface-enhanced Raman scattering substrate, which possessed strong and distinctive Raman signals for R6G, indicating the remarkable enhancement effect of the AuNPs/HNTs.     

Deep-UV surface-enhanced resonance Raman scattering of adenine on aluminum nanoparticle arrays

We report the ultrasensitive detection of adenine using deep-UV surface-enhanced resonance Raman scattering on aluminum nanostructures. Well-defined Al nanoparticle arrays fabricated over large areas using extreme-UV interference lithography exhibited sharp and tunable plasmon resonances in the UV and deep-UV wavelength ranges. Theoretical modeling based on the finite-difference time-domain method was used to understand the near-field and far-field optical properties of the nanoparticle arrays. Raman measurements were performed on adenine molecules coated uniformly on the Al nanoparticle arrays at a laser excitation wavelength of 257.2 nm. With this technique, less than 10 amol of label-free adenine molecules could be detected reproducibly in real time. Zeptomole (~30,000 molecules) detection sensitivity was readily achieved proving that deep-UV surface-enhanced resonance Raman scattering is an extremely sensitive tool for the detection of biomolecules.     

Identification and characterization of active and inactive species for surface-enhanced resonance Raman scattering

The surface-enhanced resonance Raman scattering (SERRS) activity of a statistically significant number of silver nanoparticles has been studied using a correlated SERRS mapping and transmission electron microscopy (TEM) method. TEM allowed the nature of each entity to be directly identified, and the SERRS activity was obtained from the corresponding SERRS map. Particles in various states of aggregation were analyzed to establish relative activities. It was established that SERRS activity is dependent on the specific batch of colloid tested. By averaging different colloid batches, it was shown that increasing SERRS activity is observed with increasing numbers of particles in the aggregates. By reducing the surface coverage of the particles to the extent that single moieties could be examined optically, the ratio of the relative activities of single particles, dimers, trimers, and larger aggregates was estimated. High-resolution TEM images of a number of active and inactive particles are reported. However, no clear correlation between microstructure and SERRS activity was observed.     

Detection of human serum albumin through surface-enhanced Raman scattering using gold "pearl necklace" nanomaterials as substrates

We describe a surface-enhanced Raman scattering (SERS)-based sensor for the detection of human serum albumin (HSA) using gold "pearl necklace" nanomaterials (Au PNNs) as the substrate and AB 580 as the reporter.     

Labeled gold nanoparticles immobilized at smooth metallic substrates: systematic investigation of surface plasmon resonance and surface-enhanced Raman scattering

This paper experimentally and theoretically investigates the influence of an underlying metallic substrate (i.e., gold and silver) on the surface plasmon resonance (SPR) of labeled gold nanoparticles and the concomitant impact on the surface-enhanced Raman scattering (SERS) signal from the labels. These experiments employ nanoparticles of varied sizes (30-100 nm) that are coated with a bifunctional Raman scatterer composed of (1) a disulfide for chemisorption to the nanoparticle surface, (2) a succinimidyl ester for formation of a covalent linkage to an amine-terminated self-assembled monolayer on the underlying substrate, and (3) an aryl nitro group with an intrinsically strong Raman active vibrational mode. This approach allows facile systematic assessments of how variations in nanoparticle size, substrate composition, and the gap between the nanoparticle and substrate affect the SPR of the bound particles. Both UV-vis transmission and reflection absorption (incident angle of 58 degrees ) spectroscopy are used to characterize the effect of each of these parameters on SPR. These results are then correlated with SERS enhancement factors (EFs) that were determined by accounting for particle surface concentrations, which were measured by atomic force microscopy, and the absolute number of labels, which were calculated on the basis of the surface area of each of the different-sized particles. All SERS spectra were collected at an incident angle of 58 degrees with respect to the surface normal. As expected, the SPR for particles in solution red-shifts with increasing particle size. More importantly, the SPR moves to even longer wavelengths as the size of immobilized particles increases and as the gap between the immobilized particle and substrate decreases. The red shift is also greater for a gold nanoparticle tethered to a gold substrate compared to a silver substrate. A theoretical model for the extinction of a particle above a flat substrate, corrected for surface scattering, radiation damping, and dynamic depolarization, is also briefly detailed. SPR results calculated with the model are consistent with the shifts observed in the SPR position for each of the manipulated experimental variables. The largest EFs are found for samples with an SPR maximum (lambda(max)) between the wavelengths for laser excitation (633 nm) and the Raman band for the symmetric nitro stretch of the particle coating (690 nm). As an example, an order of magnitude in the SERS enhancement factor is gained for a 60-nm particle immobilized 1.2 nm above a gold substrate (SPR lambda(max) = 657 nm) compared to that for a 30-nm particle (SPR lambda(max) = 596 nm).     

Designed fabrication of ordered porous au/ag nanostructured films for surface-enhanced Raman scattering substrates

This article reports the designed preparation of two different kinds of novel porous metal nanostructured films, namely, an ordered macroporous Au/Ag nanostructured film and an ordered hollow Au/Ag nanostructured film. Different from previous reports, the presently proposed method can be conveniently used to control film structures by simply varying the experimental conditions. The morphology of these films has been characterized by scanning electron microscopy (SEM), and their performance as surface-enhanced Raman scattering (SERS) substrates has been evaluated by using rhodamine 6G (R6G) as a probe molecule. We show that such porous nanostructured films consisting of larger interconnected aggregates are highly desirable as SERS substrates in terms of high Raman intensity enhancement, excellent stability, and reproducibility. The interconnected nanostructured aggregate, long-range ordering porosity, and nanoscale roughness are important factors responsible for this large SERS enhancement ability.     

Applicability of surface-enhanced resonance Raman scattering for the direct discrimination of ballpoint pen inks

In situ surface-enhanced resonance Raman spectroscopy (SERRS) with excitation at 685 nm is suitable for the direct discrimination of blue and black ballpoint pen inks on paper. For black inks, shorter excitation wavelengths can also be used. For blue inks, SERRS at 514.5 and 457.9 nm does not provide adequate discriminative power. At these excitation wavelengths, the SERRS signals of the Methyl Violet derivatives present in inks easily dominate the overall spectrum because of resonance enhancement and preferential interaction with silver sol particles. At 685 nm, this problem is not encountered as the Methyl Violet derivatives do not show resonance enhancement, while other components may still exhibit resonance. Thirteen blue and thirteen black ink lines were examined. For the blue and black inks, on the basis of the 685 nm SERR spectra, eight and six groups of spectra, respectively, could be distinguished. This discrimination largely agrees with information from thin layer chromatography (TLC) experiments, although some differences in group compositions are found. The in situ SERR spectra show good repeatability with regard to the Raman frequencies, band shapes and relative intensities of the spectral bands. However, absolute intensities cannot be used for discrimination purposes.