加强基础不断更新 培养能力提高素质──有机化学实验课改革体会

几年来，对有机化学实验课进行了改革探索，加强了基础训练，设立以常量、小量－半微量序列实验的合成训练，增加了应用性化合物的合成，保证了实验教学质量，积累了一些经验，受到学生的欢迎。     

火焰原子吸收光测定合成羰基镍残渣中高含量的铜钴镍铁

本文研究了用火焰原子吸收光谱法测定合成羰基镍残渣中高含量Ｃｕ，Ｃｏ，Ｎｉ，Ｆｅ，系统地试验了测定条件和Ｈ２ＳＯ４浓度，Ｓｉ含量对测定的影响，以及Ｃｕ，Ｃｏ，Ｎｉ，Ｆｅ之间相互干扰情况，研究了合适的溶样方法，选择理想了的分析谱线等，有效地消除了共存元素的干扰，实现了在同一溶液中测定合成羰基镍残渣中的高含量多元素，方法简便，快速，准确。     

塑料成型工艺实习CAI课件的开发

针对当前学生实习面临的困难，以Authorware为开发工具，编制了塑料成型工艺实习CAI课件，整个软件图文并茂，图像，动画，解说，音乐相结合，形象地介绍了塑料各种成型工艺的主要原理，生产设备，工艺流程和相关产品，应用本软件学生可以进行模拟实习，该软件激发了学生学习的兴趣，提高了实习质量。     

标准强化竹豆型营养保健米膳微量元素模式营养评分研究

测定了竹豆营养保健米的Ｚｎ，Ｃｕ，Ｆｅ，Ｍｎ，Ｓｅ含量，作了营养评分，并对该型保健米的科学配膳进行了研究，为改革主食营养结构，防治疾病提供了依据。     

氟碳铈矿提取稀土的绿色化学进展

氟碳铈矿是稀土工业的重要原材料，目前从氟碳铈矿提取稀土主要采用酸法工艺，该工艺虽然稀土回收高，但流程长，试剂消耗长，成本较高，同时酸法产生ＨＦ及废酸碱污染环境。因此寻找低成本，低污染的绿色化学处理工艺是近几十年中人们一直努力的方向。本文系统介绍了氟碳铈矿分解工艺的发展，并着重介绍邓氯化铵法提取氟碳铈矿稀土的的新工艺。该工艺采用盐类分解并氯化氟碳铈矿，直接用水浸取回收稀土，不引入酸和碱，提高了反应选择性，减轻了稀土在稀土杂质分负荷，降低了化工材料消耗，简化了工艺，提高了回收率，是符合绿色化学要求的工艺。     

La2O3掺杂对SrTiO3压敏电容双功能陶瓷显微结构及电性能的影响

用CALPHAD技术优化计算了稀土卤化物熔盐TbCl3-ACl(A=Li，Na，K，Rb，Cs)五个二元系相图以及其热力学性质。优化采用了短程有序-扩展似化学模型，得到了热力学性质和相图自洽一致的结果，并与相应的实验相图进行了比较，对其中差异的部分进行了分析和修正。讨论了热力学优化结果，并探讨了过剩热力学性质变化的规律和特征。     

甲基叔丁基醚（MTEB）的合成

介绍了甲醇，异丁烯合成甲基叔丁基醚的催化剂，热力学，动力学。综述了合成ＭＴＢＥ的主原原料异丁烯的生产过程，并总结了甲醇，异丁醇和甲醇，叔丁醇合成了ＭＴＢＥ的研究开发进展，参考文献１６篇。     

周岁内幼儿头发中锌钙含量的动态分析

对合肥市16671名1－12个月幼儿的发锌，钙含量进行了测定，并对测定值进行了统计分析。结果表明，锌，钙的含量随着月龄的增加呈直线递减。并给出了发锌，钙含量的趋势线方程，丰富了目前文献给出的发锌，钙的标准值，为及时准确判断周岁内幼儿微量元素锌，钙缺乏程度提出依据。     

高纯氧化镨中痕量稀土杂质的ICP—MS测定

本文研究了用等离子质谱法测定高纯氧化镨中十三个稀土杂质。确定了仪器最佳工作条件，试验了功率，雾化器流量对基体抑制效应的影响，考察了镧，铈，镨氧化物离子及氢氧化物离子的干扰，选择了测定同位素，用标准加入法校正基体的抑制作用，以改善测量精度。通过加料回收及实际分析认为本法具有耗样少，灵敏度高，操作简单的优点，可用于４Ｎ－６Ｎ纯度的氧化镨的分析。     

O,O,S-三甲基硫赶磷酸酯在甲胺磷中毒检验中的应用

利用气相色诤质谱(GC-MS)分析了甲胺磷中毒者的检材(血，胃内容物)，均检出了O，O，S-三甲基硫赶磷酸酯，确未检出过甲胺磷。研究了这一现象的原因和确定了O，O，S-三甲基硫赶磷酸酯(O，O，S-TMTP)可作为甲胺磷中毒的佐证物。     

Simultaneous Determination of Copper and Bismuth by Anodic Stripping Voltammetry Using H‐Point Standard Addition Method with Simultaneous Addition of Analytes

Simultaneous determination of bismuth and copper by anodic stripping voltammetry using H‐point standard addition method (HPSAM) with simultaneous addition of analytes is described. The effect of various parameters including acid concentration, accumulation time, accumulation potential and concentration ratio of analytes in the standard solution on the sensitivity and accuracy of method were investigated. The results of applying the H‐point standard addition method showed that Cu²⁺ and Bi³⁺ could be determined simultaneously with the concentration ratios of Cu²⁺ to Bi³⁺ varying from 1 : 15 to 16 : 1 in the mixed sample. The method was successfully applied to the simultaneous determination of copper and bismuth in some synthetic mixtures.     

Simultaneous Determination of Ultra Trace of Uranium and Cadmium by Adsorptive Cathodic Stripping Voltammetry Using H‐Point Standard Addition Method

A sensitive adsorptive cathodic stripping voltammetry with H‐point standard addition method for simultaneous determination of uranium and cadmium has been developed. The trace amounts of these metal ions can be simultaneously determined using the Levodpa as complexing agent. Optimal conditions were: accumulation time 50 s, accumulation potential 0.0 mV, scan rate 40 mV s^?1, supporting electrolyte 0.1 M ammonium buffer pH 9.6, and 1×10^?5 M of Levodopa. The results revealed that the cadmium and uranium could be simultaneously determined by H‐point standard addition method with different concentration ratios of uranium to cadmium. The method was successfully applied in a several of real samples.     

Simultaneous Spectrophotometric Determination of Aluminum and Iron in Micellar Media by Using the H‐Point Standard Addition Method

A very simple spectrophotometric method for simultaneous determination of aluminum(III) and iron(III) based on formation of their complexes with pyrocatechol violet (PCV) in micellar media, using the H‐point standard addition method (HPSAM), is described. In micellar media, the metal complexes of Al‐PCV and Fe‐PCV are formed very fast. Formation of both of the complexes was complete within 5 min at pH 8.5. The linear ranges for aluminum and iron were 0.05‐2.50 and 0.10‐4.00 μg mL^?1, respectively. The relative standard deviation (R.S.D.) for the simultaneous determination 0.40 μg mL^?1 of Al(III) and 0.20 μg mL^?1 of Fe(III) were 3.24% and 4.22%, respectively. Interference effects of common anions and cations were studied. The method was applied to simultaneous determination of Al(III) and Fe(III) in standard reference material and alloy samples.     

H‐Point Standard Addition Method Applied to Voltammetry of Microparticles. Quantitation of Dyes in Pictorial Samples

A solid‐state electrochemical application of the H‐point standard addition method (HPSAM) for quantifying two electroactive compounds, A, B, that produce strongly overlapped voltammetric peaks is described. It is based on peak current measurement in square‐wave voltammograms recorded for solid samples containing a reference compound R, upon additions of a A‐ (or B‐) containing standard compound. The method allows to the determination of the mass fraction of A and B by applying the H‐point standard addition method to solid state voltammetry. The quotients between the currents measured at two selected potentials and the peak current of R vary linearly with the mass ratio of the added standard and the reference compound, thus providing an electrochemical method for determining the content of A and B in the sample avoiding matrix effects. The method is applied to the simultaneous determination of alizarin and purpurin in madder pigments and pictorial specimens using morin as a reference material.     

Simultaneous Kinetic Determination of Phosphate and Silicate by Spectrophotometric H‐Point Standard Addition Method

The H‐point standard addition method (HPSAM), based on spectrophotometric measurements for simultaneous determination of phosphate and silicate, has been established. The method is based on the difference between their reactions rates with molybdenum in the presence of ascorbic acid. The results revealed that phosphate and silicate could be determined simultaneously with the concentration ratios of phosphate to silicate varying from 1:10 to 12:1 in the binary mixtures. The effects of chelating agent nature, time, interferents and experimental variables are also investigated. Under working conditions, the proposed method was successfully applied to the simultaneous determination of phosphate and silicate in synthetic detergents.     

Simultaneous Determination of Tyrosine and Histidine by Differential Pulse Cathodic Stripping Voltammetry Using H‐point Standard Addition Method in Tap and Seawater

H‐point standard addition method (HPSAM) has been applied for simultaneous determination of tyrosine and histidine in trace levels using copper ions by adsorptive cathodic stripping voltammetry. The amino acids‐Cu(II) complexes were accumulated onto the surface of a hanging mercury drop electrode for 40 s. The reduction peaks of preconcentrated complexes were used for simultaneous determination of amino acids in the range 8.0–180 and 30–1100 nM for tyrosine and histidine respectively. The effect of various parameters such as pH, concentration of copper, accumulation time and scan rate on the selectivity were studied. Under the optimized conditions the method was successfully applied for determination of tyrosine and histidine in synthetic and real samples.     

叠加内标法色谱定量分析

 叠加内标法是指在色谱定量分析中将内标法与叠加法结合的一种新的定量方法。叙述了叠加内标法定量的理论依据 ,规定了其操作步骤 ,并详细说明了这种方法的适用条件和优缺点。     

气相色谱叠加定量方法的研究

叠加法是由内标法衍生而来的一种气相色谱定量方法。对于较复杂混合物的分析,当选择内标物困难时,用叠加法定量更为方便。本文在大量实验的基础上,提出了叠加法定量过程中应注意的一些问题。     

流动注射梯度技术-广义标准加入法校正ICP-AES测定中的干扰

提出了流动注射梯度技术和广义标准加入法用于校正ICP-AES测定中的基体和光谱干扰,该方法只需配制待测元素的一个标准溶液就可获得GSAM方法中所需要的信息.详细讨论了载流流速、延迟时间等操作参数的选择并分析了两个合成试样、铜合金和钢铁试样中的锌、锰和砷,相对标准偏差在0.5～1.9%之间.     

Simultaneous Spectrophotometric Determination of Uranium and Thorium Using Arsenazo III by H‐Point Standard Addition Method and Partial Least Squares Regression

Simultaneous determination of uranium and thorium using arsenazo III as a chromogenic reagent at pH 1.70 by H‐point standard addition method (HPSAM) and partial least squares (PLS) calibration is described. Under optimum conditions, the simultaneous determinations of uranium and thorium by HPSAM were performed. The absorbencies at one pair of wavelengths, 649 and 669 nm, were monitored with the addition of standard solutions of uranium. The results of applying the HPSAM showed that uranium and thorium can be determined simultaneously with weight concentration ratios of uranium to thorium varying from 20:1 to 1:15 in the mixed sample. By multivariate calibration methods such as PLS, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. In this study, the calibration model is based on absorption spectra in the 600–750 nm range for 25 different mixtures of uranium and thorium. Calibration matrices contained 0.10–21.00 and 0.25–18.5 μg mL^?1 of uranium and thorium, respectively. The RMSEP for uranium and thorium were 0.7400 and 0.7276, respectively. Both proposed methods (HPSAM and PLS) were also successfully applied to the determination of uranium and thorium in several synthetic and real matrix samples.