Synthesis and Characterization of Ge(II), Sn(II), and Pb(II) Monoamides with -NH2 Ligands

The synthesis and characterization of the first divalent germanium, tin, and lead monoamide derivatives of the parent amide group -NH(2) are presented. They have the general formula (ArMNH(2))(2) (M = Ge, Ar = Ar'(C(6)H(3)-2,6-Pr(i)(2)) or Ar* (C(6)H(3)-2,6(C(6)H(2)-2,4,6-Pr(i)(3))); M = Sn, Ar = Ar*; M = Pb, Ar = Ar*). For germanium and tin, they were obtained by reacting the corresponding terphenyl halides of the group 14 elements with liquid ammonia in diethyl ether. The lead amide derivative (Ar*PbNH(2))(2) was synthesized by reaction of LiNH(2) with Ar*PbBr in diethyl ether. The compounds were characterized by IR and multinuclear NMR spectroscopies and by X-ray crystallography in the case of the (Ar'GeNH(2))(2) or (Ar*SnNH(2))(2) derivatives. They possess dimeric structures with two -NH(2) groups bridging the germanium and tin centers. For lead, the reaction with ammonia led to isolation of a stable ammine complex of formula Ar*PbBr(NH(3)) which was characterized by IR and NMR spectroscopies and by X-ray crystallography. It is the first structural characterization of a divalent lead ammine complex.     

Synthesis and characterisation of selected group 14 derivatives of the 2,5-(CF3)2C6H3 (Ar) ligand

Selected group 14 tetrahalides EX(4) (E = Si, Ge or Sn; X = Cl or Br) have been reacted in various molar ratios with ArLi, where Ar = 2,5-(CF(3))(2)C(6)H(3). The compounds Ar(2)SiCl(2)1, Ar(3)SiF 3, Ar(2)Si(OH)(2)4, Ar(2)GeCl(2)7, Ar(2)Ge(Br)Ge(Br)Ar(2)8, Ar(3)SnCl 10, Ar(4)Sn 11 and Ar(3)SnBr 12 have been isolated, and characterised by single-crystal X-ray diffraction, elemental analysis and (19)F solution-state NMR spectroscopy.     

Terphenyl ligand stabilized lead(II) derivatives: steric effects and lead-lead bonding in diplumbenes

The reaction of PbBr(2) with the lithium reagents LiC(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2) (LiArPr(i)(2)) and Et(2)O.LiC(6)H(3)-2,6-(2,6-Pr(i)-4-Bu(t)C(6)H(2))(2) (Et(2)O.LiArPr(i)(2)Bu(t)) furnished the bromide bridged organolead(II) halides [Pb(mu-Br)ArPr(i)(2)](2) (1) and[Pb(mu-Br)ArPr(i)(2)Bu(t)](2) (2) as orange crystals. Treatment of 1 with a stoichiometric amount of methylmagnesium bromide resulted in the "diplumbene" Pr(i)(2)Ar(Me)PbPb(Me)ArPr(i)(2) (3). The addition of 1 equiv of 4-tert-butylphenylmagnesium bromide to 1 afforded the feebly associated, Pb-Pb bonded species [Pb(C(6)H(4)-4-Bu(t))ArPr(i)(2)](2) (4), whereas the corresponding reaction of tert-butylmagnesium chloride and 1 afforded the monomer Pb(Bu(t))ArPr(i)(2) (5). The reaction of the more crowded aryl lead(II) bromide [Pb(mu-Br)ArPr(i)(3)](2) (Ar = C(6)H(3)-2,6(C(6)H(2)-2,4,6-Pr(i)(3))(2)) with 4-isopropyl-benzylmagnesium bromide or LiSi(SiMe(3))(3) yielded the monomers 6, [Pb(CH(2)C(6)H(4)-4-Pr(i))ArPr(i)(3)], or 7, [Pb(Si(SiMe(3))(3))ArPr(i)(3)]. All compounds were characterized with use of X-ray crystallography, (1)H, (13)C, and (207)Pb NMR (3-7), and UV-vis spectroscopy. The dimeric Pb-Pb bonded (Pb-Pb = 3.1601(6) A) structure of 3 may be contrasted with the previously reported monomeric structure of Pb(Me)ArPr(i)(3), which differs from 3 only in that it has para Pr(i) substituents on the flanking aryl rings. The presence of these groups is sufficient to prevent the weak Pb-Pb bonding seen in 3. The dimer 4 displays a Pb-Pb distance of 3.947(1) A, which indicates a very weak lead-lead interaction, and it is possible that this close approach could be caused by packing effects. The monomeric structures of 6 and 7 are attributable to steric effects and, in particular, to the large size of ArPr(i)(3).     

Extremely bulky amido-group 14 element chloride complexes: potential synthons for low oxidation state main group chemistry

The preparation of a series of extremely bulky secondary amines, Ar*N(H)SiR(3) (Ar* = C(6)H(2){C(H)Ph(2)}(2)Me-2,6,4; R(3) = Me(3), MePh(2) or Ph(3)) is described. Their deprotonation with either LiBu(n), NaH or KH yields alkali metal amide complexes, several monomeric examples of which, [Li(L){N(SiMe(3))(Ar*)}] (L = OEt(2) or THF), [Na(THF)(3){N(SiMe(3))(Ar*)}] and [K(OEt(2)){N(SiPh(3))(Ar*)], have been crystallographically characterised. Reactions of the lithium amides with germanium, tin or lead dichloride have yielded the first structurally characterised two-coordinate, monomeric amido germanium(II) and tin(II) chloride complexes, [{(SiR(3))(Ar*)N}ECl] (E = Ge or Sn; R = Me or Ph), and a chloride bridged amido-lead(II) dimer, [{[(SiMe(3))(Ar*)N]Pb(μ-Cl)}(2)]. DFT calculations on [{(SiMe(3))(Ar*)N}GeCl] show its HOMO to exhibit Ge lone pair character and its LUMO to encompass its Ge based p-orbital. A series of bulky amido silicon(IV) chloride complexes have also been prepared and several examples, [{(SiR(3))(Ar*)N}SiCl(3)] (R(3) = Me(3), MePh(2)) and [{(SiMe(3))(Ar*)N}SiHCl(2)], were crystallographically characterised. The sterically hindered group 14 complexes reported in this study hold significant potential as precursors for kinetically stabilised low oxidation state and/or low coordination number group 14 complexes.     

Cyclic and polycyclic tellurium-tin and tellurium-lead compounds--synthesis, structures and thermal decomposition

The miscellaneously substituted silyltellanes tBu(2)PhSiTeSiMe(3) (1) and (Me(3)Si)(3)SiTeSiMe(3) were used to synthesize the cyclic tin(II) and lead(II) tellurolates [(tBu(2)PhSiTe)(4)M(2)] (M = Sn (2), Pb (3)), [tBu(2)PhSiTePbC(SiMe(3))(3)](2) (4) and the uncommon cluster compound [{(Me(3)Si)(3)SiTe}(4)Te(2)Sn(4)] (5).     

Group 14 triple-decker cations

The triple-decker cations trans-[(Cp*Sn)(2)(mu-eta(5):eta(5)-Cp*)](+) and trans-[(Cp*Pb)(2)(mu-eta(5):eta(5)-Cp*)](+) have been prepared and structurally characterized as their [B(C(6)F(5))(4)](-) salts from the reactions of [Cp*M][B(C(6)F(5))(4)](M = Sn, Pb) with the appropriate decamethylmetallocene. Both triple-decker cations adopt a cisoid arrangement of terminal Cp* groups, whereas the two known triple-decker main-group anions possess a transoid arrangement of terminal Cp groups. The reason for this conformational difference has been probed on the basis of DFT calculations.     

Iridium derivatives of fluorinated aromatics by C-H activation: isolation of classical and non-classical hydrides

A reaction of trans-[Ir(H)(5)(PiPr(3))(2)] (1) with 2,3,5,6-tetrafluoropyridine, pentafluorobenzene or 1,3-difluorobenzene in the presence of neohexene affords the square-pyramidal C-H activation products cis-trans-[Ir(4-C(5)NF(4))(H)(2)(PiPr(3))(2)] (2), cis-trans-[Ir(C(6)F(5))(H)(2)(PiPr(3))(2)] (4) and cis-trans-[Ir(2-C(6)H(3)F(2))(H)(2)(PiPr(3))(2)] (6). Irradiation of complex 1 with 2,3,5,6-tetrafluoropyridine or pentafluorobenzene gave the hydrides cis-trans-[Ir(4-C(5)NF(4))(H)(2)(H(2))(PiPr(3))(2)] (3) or cis-trans-[Ir(C(6)F(5))(H)(2)(H(2))(PiPr(3))(2)] (5). The presence of non-classical bound H(2) moieties has been demonstrated by the measurement of T(1) times at different temperatures. For 3 the H-H distance in the H(2) ligand can be estimated to be 0.82 A. The dihydride compounds 2, 4 and 6 react with CO to yield the complexes cis-trans-[Ir(Ar)(H)(2)(CO)(PiPr(3))(2)] (7: Ar = 4-C(5)NF(4), 8: Ar = C(6)F(5), 9: Ar = 2-C(6)H(3)F(2)). A reaction of 2 or 3 with an excess of ethylene leads to the formation of ethane and the Ir(i) ethylene complex trans-[Ir(4-C(5)NF(4))(eta(2)-C(2)H(4))(PiPr(3))(2)] (10). Treatment of 10 with CO furnishes the Ir(i) complex trans-[Ir(4-C(5)NF(4))(CO)(PiPr(3))(2)] (11).     

Polytypism in columnar group 14 halide salts: structures of (Et2NH2)3Pb3X9 x nH2O (X = Cl,Br) and (beta-alaninium)2SnI4

The crystal structures of three hybrid organoammonium metal halide salts composed of edge-sharing MX(6) octahedra have been determined. The genesis of these structures can be traced to the parent hexagonal MX(2) structure via dimensional reduction and recombination arguments. The structures of (Et(2)NH(2))(3)Pb(3)X(9) x nH(2)O (X = Br, I) contain unique columnar (Pb(3)X(9))(n)(3)(n)(-) structures, built up of edge-shared PbX(6) octahedra. The interaction of the Et(2)NH(2)(+) cations with the parent PbX(2) structures leads to a rearrangement of the lattice into the observed columnar structure. Groups of six Et(2)NH(2)(+) cations are hydrogen bonded to these columns, girdling them at their narrowest points. These hydrogen bonds contribute to the formation of the zigzag nature of the columnar inorganic framework. The resultant structures are recombinate analogues (polytypes) of the (Pb(3)X(9))(n)(3)(n)(-) stacks that would be obtained by the dimensional reduction process of the parent layer PbX(2) structure into simple edge-shared ribbons of PbX(6) octahedra. These structures can be described in terms of the stacking of planar bibridged Pb(3)X(8)(2-) units decorated with a single halide ion at a terminal lead ion site. In a similar fashion, (beta-alaH)(2)Sn(2)I(6) contains corrugated (Sn(2)I(6))(n)(2)(n)(-) columns (beta-ala = beta-alanine), with the cations sitting in the clefts of the columns.     

Bismuth pyrostannate, Bi2Sn2O7, from the first structurally characterized heterobimetallic Bi:Sn alkoxides

The first heterobimetallic Bi:Sn alkoxide complexes [Bi(2)SnO(OCH(CF(3))(2))(5)(O(t)Bu)(3)(THF)] (1) and [BiSnO(OCH(CF(3))(2))(3)(O(t)Bu)(2)](2) (2) are described. The complexes were obtained through mixing and heating equimolar quantities of the component alkoxides, Bi(OCH(CF(3))(2))(3) and Sn(O(t)Bu)(4), under solvent-free conditions (1) and in THF (2). The solid-state structures were determined by single crystal X-ray diffraction showing ligand redistribution from Bi(III) to Sn(IV) in the two molecular species. Compound 2 behaves as a single-source precursor for the thermolytic formation of bismuth pyrostannate, Bi(2)Sn(2)O(7).     

Why the mechanisms of digermyne and distannyne reactions with H2 differ so greatly

Despite their formal relationship to alkynes, Ar'GeGeAr', Ar'SnSnAr', and Ar*SnSnAr* [Ar' = 2,6-(2,6-iPr(2)C(6)H(3))(2)C(6)H(3); Ar* = 2,6-(2,4,6-iPr(3)C(6)H(2))(2)-3,5-iPr(2)C(6)H] exhibit high reactivity toward H(2), quite unlike acetylenes. Remarkably, the products are totally different. Ar'GeGeAr' can react with 1-3 equiv of H(2) to give mixtures of Ar'HGeGeHAr', Ar'H(2)GeGeH(2)Ar', and Ar'GeH(3). In contrast, Ar'SnSnAr' and Ar*SnSnAr* react with only 1 equiv of H(2) but give different types of products, Ar'Sn(μ-H)(2)SnAr' and Ar*SnSnH(2)Ar*, respectively. In this work, this disparate behavior toward H(2) has been elucidated by TPSSTPSS DFT computations of the detailed reaction mechanisms, which provide insight into the different pathways involved. Ar'GeGeAr' reacts with H(2) via three sequential steps: H(2) addition to Ar'GeGeAr' to give singly H-bridged Ar'Ge(μ-H)GeHAr'; isomerization of the latter to the more reactive Ge(II) hydride Ar'GeGeH(2)Ar'; and finally, addition of another H(2) to the hydride, either at a single Ge site, giving Ar'H(2)GeGeH(2)Ar', or at a Ge-Ge joint site, affording Ar'GeH(3) + Ar'HGe:. Alternatively, Ar'Ge(μ-H)GeHAr' also can isomerize into the kinetically stable Ar'HGeGeHAr', which cannot react with H(2) directly but can be transformed to the reactive Ar'GeGeH(2)Ar'. The activation of H(2) by Ar'SnSnAr' is similar to that by Ar'GeGeAr'. The resulting singly H-bridged Ar'Sn(μ-H)SnHAr' then isomerizes into Ar'HSnSnHAr'. The subsequent facile dissociation of the latter gives two Ar'HSn: species, which then reassemble into the experimental product Ar'Sn(μ-H)(2)SnAr'. The reaction of Ar*SnSnAr* with H(2) forms in the kinetically and thermodynamically more stable Ar*SnSnH(2)Ar* product rather than Ar*Sn(μ-H)(2)SnAr*. The computed mechanisms successfully rationalize all of the known experimental differences among these reactions and yield the following insights into the behavior of the Ge and Sn species: (I) The active sites of Ar'EEAr' (E = Ge, Sn) involve both E atoms, and the products with H(2) are the singly H-bridged Ar'E(μ-H)EHAr' species rather than Ar'HEEHAr' or Ar'EEH(2)Ar'. (II) The heavier alkene congeners Ar'HEEHAr' (E = Ge, Sn) cannot activate H(2) directly. Instead, Ar'HGeGeHAr' must first isomerize into the more reactive Ar'GeGeH(2)Ar'. Interestingly, the subsequent H(2) activation by Ar'GeGeH(2)Ar' can take place on either a single Ge site or a joint Ge-Ge site, but Ar'SnSnH(2)Ar' is not reactive toward H(2). The higher reactivity of Ar'GeGeH(2)Ar' in comparison with Ar'SnSnH(2)Ar' is due to the tendency of group 14 elements lower in the periodic table to have more stable lone pairs (i.e., the inert pair effect) and is responsible for the differences between the reactions of Ar'EEAr' (E = Ge, Sn) with H(2). Similarly, the carbene-like Ar'HGe: is more reactive toward H(2) than is Ar'HSn:. (III) The doubly H-bridged Ar'E(μ-H)(2)EAr' (E = Ge, Sn) species are not reactive toward H(2).     

Syntheses, crystal structures and properties of new lead(II) or bismuth(III) selenites and tellurite

Four new lead(II) or bismuth(III) selenites and a tellurite, namely, Pb(3)(TeO(3))Cl(4), Pb(3)(SeO(3))(2)Br(2), Pb(2)Cd(3)(SeO(3))(4)I(2)(H(2)O), Pb(2)Ge(SeO(3))(4) and BiFe(SeO(3))(3), have been prepared and structurally characterized by single crystal X-ray diffraction (XRD) analyses. These compounds exhibit five different types of structures. The structure of Pb(3)(TeO(3))Cl(4) features a three-dimensional (3D) lead(II) chloride network with tellurite anions filling in the 1D tunnels of Pb(4) 4-member rings (MRs) along the c-axis. Pb(3)(SeO(3))(2)Br(2) contains a 3D network composed of lead(II) selenite layers interconnected by bromide anions. Pb(2)Cd(3)(SeO(3))(4)I(2)(H(2)O) is a 3D structure based on 2D cadmium(II) selenite layers which are further connected by 1D lead(II) iodide ladder chains with lattice water molecules located at the 1D tunnels of the structure. Pb(2)Ge(SeO(3))(4) features a 3D framework constructed by the alternate arrangement of lead(II) selenite layers and germanium(iv) selenite layers in the [100] direction. The structure of BiFe(SeO(3))(3) is built on the 3D anionic framework of ion(III) selenite with the bismuth(III) ions located at its Fe(6)Se(6) 12-MR tunnels. Pb(3)(TeO(3))Cl(4) (Pna2(1)) is polar and BiFe(SeO(3))(3) (P2(1)2(1)2(1)) is noncentrosymmetric. Powder second-harmonic generation (SHG) measurements using 1064 nm radiation indicate that BiFe(SeO(3))(3) exhibits a weak SHG efficiency of about 0.2 × KH(2)PO(4) (KDP). Magnetic property measurements for BiFe(SeO(3))(3) show a dominant antiferromagnetic interaction with weak spin-canting at low temperatures. IR, UV-vis and thermogravimetric, as well as electronic structure calculations were also performed.     

Synthesis and Structure of Ba(2)Sn(3)Sb(6), a Zintl Phase Containing Channels and Chains

The new Zintl phase dibarium tritin hexaantimonide, Ba(2)Sn(3)Sb(6) has been synthesized, and its structure has been determined by single-crystal X-ray diffraction methods. It crystallizes in the orthorhombic space group -Pnma with a = 13.351(1) ?, b = 4.4100(5) ?, c = 24.449(3) ?, and Z = 4 (T = -50 degrees C). The structure of Ba(2)Sn(3)Sb(6) comprises large channels [010] defined by 30-membered rings constructed from an anionic framework. This framework is built up from Sn-centered trigonal pyramids and tetrahedra, as well as zigzag chains of Sb atoms. Within the channels reside the Ba(2+) cations and additional isolated zigzag Sb-Sb chains. The simultaneous presence of Sn trigonal pyramids and tetrahedra implies that Ba(2)Sn(3)Sb(6) is a mixed-valence compound whose oxidation state notation can be best represented as (Ba(2+))(2)[(Sn(II))(2)(Sn(IV))(Sb(-)(III))(3)(Sb(-)(I))](2)(-)[(Sb(-)(I))(2)](2)(-).     

New vanadium selenites: centrosymmetric Ca2(VO2)2(SeO3)3(H2O)2, Sr2(VO2)2(SeO3)3, and Ba(V2O5)(SeO3), and noncentrosymmetric and polar A4(VO2)2(SeO3)4(Se2O5) (A = Sr2+ or Pb2+)

Five new vanadium selenites, Ca(2)(VO(2))(2)(SeO(3))(3)(H(2)O)(2), Sr(2)(VO(2))(2)(SeO(3))(3), Ba(V(2)O(5))(SeO(3)), Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), have been synthesized and characterized. Their crystal structures were determined by single crystal X-ray diffraction. The compounds exhibit one- or two-dimensional structures consisting of corner- and edge-shared VO(4), VO(5), VO(6), and SeO(3) polyhedra. Of the reported materials, A(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) (A = Sr(2+) or Pb(2+)) are noncentrosymmetric (NCS) and polar. Powder second-harmonic generation (SHG) measurements revealed SHG efficiencies of approximately 130 and 150 × α-SiO(2) for Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), respectively. Piezoelectric charge constants of 43 and 53 pm/V, and pyroelectric coefficients of -27 and -42 μC/m(2)·K at 70 °C were obtained for Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)) and Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), respectively. Frequency dependent polarization measurements confirmed that the materials are not ferroelectric, that is, the observed polarization cannot be reversed. In addition, the lone-pair on the Se(4+) cation may be considered as stereo-active consistent with calculations. For all of the reported materials, infrared, UV-vis, thermogravimetric, and differential thermal analysis measurements were performed. Crystal data: Ca(2)(VO(2))(2)(SeO(3))(3)(H(2)O)(2), orthorhombic, space group Pnma (No. 62), a = 7.827(4) ?, b = 16.764(5) ?, c = 9.679(5) ?, V = 1270.1(9) ?(3), and Z = 4; Sr(2)(VO(2))(2)(SeO(3))(3), monoclinic, space group P2(1)/c (No. 12), a = 14.739(13) ?, b = 9.788(8) ?, c = 8.440(7) ?, β = 96.881(11)°, V = 1208.8(18) ?(3), and Z = 4; Ba(V(2)O(5))(SeO(3)), orthorhombic, space group Pnma (No. 62), a = 13.9287(7) ?, b = 5.3787(3) ?, c = 8.9853(5) ?, V = 673.16(6) ?(3), and Z = 4; Sr(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), orthorhombic, space group Fdd2 (No. 43), a = 25.161(3) ?, b = 12.1579(15) ?, c = 12.8592(16) ?, V = 3933.7(8) ?(3), and Z = 8; Pb(4)(VO(2))(2)(SeO(3))(4)(Se(2)O(5)), orthorhombic, space group Fdd2 (No. 43), a = 25.029(2) ?, b = 12.2147(10) ?, c = 13.0154(10) ?, V = 3979.1(6) ?(3), and Z = 8.     

Metal ion-controlled self-assembly using pyrimidine hydrazone molecular strands with terminal hydroxymethyl groups: a comparison of Pb(II) and Zn(II) complexes

Metal complexation studies were performed with the ditopic pyrimidine-hydrazone (pym-hyz) strand 6-hydroxymethylpyridine-2-carboxaldehyde (2-methyl-pyrimidine-4,6-diyl)bis(1-methylhydrazone) (1) and Pb(ClO(4))(2)·3H(2)O, Pb(SO(3)CF(3))(2)·H(2)O, Zn(SO(3)CF(3))(2), and Zn(BF(4))(2) to examine the ability of 1 to form various supramolecular architectures. X-ray crystallographic and NMR studies showed that coordination of the Pb(II) salts with 1 on a 2:1 metal/ligand ratio in CH(3)CN and CH(3)NO(2) resulted in the linear complexes [Pb(2)1(ClO(4))(4)] (2), [Pb(2)1(ClO(4))(3)(H(2)O)]ClO(4) (3), and [Pb(2)1(SO(3)CF(3))(3)(H(2)O)]SO(3)CF(3) (4). Two unusually distorted [2 × 2] grid complexes, [Pb1(ClO(4))](4)(ClO(4))(4) (5) and [Pb1(ClO(4))](4)(ClO(4))(4)·4CH(3)NO(2) (6), were formed by reacting Pb(ClO(4))(2)·6H(2)O and 1 on a 1:1 metal/ligand ratio in CH(3)CN and CH(3)NO(2). These grids formed despite coordination of the hydroxymethyl arms due to the large, flexible coordination sphere of the Pb(II) ions. A [2 × 2] grid complex was formed in solution by reacting Pb(SO(3)CF(3))(2)·H(2)O and 1 on a 1:1 metal/ligand ratio in CH(3)CN as shown by (1)H NMR, microanalysis, and ESMS. Reacting the Zn(II) salts with 1 on a 2:1 metal/ligand ratio gave the linear complexes [Zn(2)1(H(2)O)(4)](SO(3)CF(3))(4)·C(2)H(5)O (7) and [Zn(2)1(BF(4))(H(2)O)(2)(CH(3)CN)](BF(4))(3)·H(2)O (8). (1)H NMR studies showed the Zn(II) and Pb(II) ions in these linear complexes were labile undergoing metal ion exchange. All of the complexes exhibited pym-hyz linkages in their cisoid conformation and binding between the hydroxymethyl arms and the metal ions. No complexes were isolated from reacting either of the Zn(II) salts with 1 on a 1:1 metal/ligand ratio, due to the smaller size of the Zn(II) coordination sphere as compared to the much larger Pb(II) ions.     

Heteroligated metallomacrocycles generated via the weak-link approach

Sequential reaction of two different hemilabile ligands (Ph(2)PCH(2)CH(2)X)(2)Ar (X = S, Ar = C(6)H(4) or C(6)(CH(3))(4); X = NCH(3), Ar = C(6)H(4); X = O, Ar = 9,10-C(14)H(8)) with a Rh(I) metal center resulted in the formation of heteroligated metallomacrocycles in high yield. The specific reaction conditions for each pair of hemilabile ligands are discussed. The solid-state structure of [[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)H(4)]-[1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)(CH(3))(4)]Rh(2)](BF(4))(2), as determined by X-ray crystallography, is presented.     

1,2-Distanna-closo-dodecaborate--a rare example of a 1,2-distannylene ligand in transition metal chemistry

The coordination chemistry of the novel bidentate tin ligand 1,2-distanna-closo-dodecaborate is illustrated for the first time by reactions with molybdenum, platinum and gold metal complexes. Up to three clusters coordinate two metal centers in close proximity. For all these metal complexes the typical μ-bridging coordination mode was observed exclusively. Furthermore, two cluster anions react with dichloromethane via substitution of the chloride ions. The carbon functionalized tin cluster [Et(4)N](2)[CH(2)(Sn(2)B(10)H(10))(2)] and the coordination complexes [Et(3)NMe](6)[Mo(2)(CO)(6)(Sn(2)B(10)H(10))(3)], [Et(3)NMe](2)[{HPt(PEt(3))(2)(Sn(2)B(10)H(10))}(2)], [Et(4)N](2)[{HPt(PPh(3))(2)(Sn(2)B(10)H(10))}(2)] and [{(TP)Au}(2)(Sn(2)B(10)H(10))] (TP = PhP(o-Ph(2)PC(6)H(4))(2)) are fully characterized by multinuclear NMR spectroscopy, elemental analyses and crystal structure analyses.     

Chemistry of a novel family of tridentate alkoxy tin(II) clusters

The chemical interconversions observed for a novel family of trihydroxymethyl ethane (THME-H(3)) ligated Sn(II) compounds have been determined using single-crystal X-ray and (119)Sn NMR experiments. (mu-THME)(2)Sn(3) (1) was isolated from the reaction of 3 equiv of [Sn(NR(2))(2)](2) (R = SiMe(3)) with 4 equiv of THME as a unique trinuclear species capped above and below the plane of Sn atoms by two THME ligands. Upon reaction with "Sn(NR(2))(2)", compound 1 rearranged to yield another novel molecule [(mu-THME)Sn(2)(NR(2))](2) (2). Compound 2 could also be formed directly from the stoichiometric mixture of THME-H(3) and [Sn(NR(2))(2)](2). Further studies revealed that 1 would also rearrange in the presence of Sn(OR)(2) to form [(mu-THME)Sn(2)(mu-OR)](2) [OR = OMe (3), OCH(2)Me (4), OCH(2)CH(Me)CH(2)CH(3) (5), OCH(2)CMe(3) (6, ONep), OC(6)H(5) (7, not structurally characterized), OC(6)H(4)Me-3 (8), OC(6)H(4)Me-2 (9), OC(6)H(3)(Me)(2)-2,6 (10), OC(6)H(3)(CHMe(2))(2)-2,6 (11). Additionally, 3-11 could by synthesized from the reaction of 2 and the appropriate H-OR. (119)Sn solution NMR studies of 2-11, in THF-d(8), indicate that an equilibrium between the parent complex and its disassociation products (1 and the free parent Sn alkoxy or amide precursor) exists at room temperature. This is a likely reason behind the ease of interconversion observed for 1. The generality of this exchange was further verified through the reaction of 1 with [Ti(mu-ONep)(ONep)(3)](2), which led to the isolation of (mu-ONep)(2)Sn(3)(mu-THME)(2)Ti(ONep)(2) (12). For 12, the solid-state structure was maintained in solution with no indication of an equilibrium.     

Activation of carbodiimide and transformation with amine to guanidinate group by Ln(OAr)3(THF)2 (Ln: lanthanide and yttrium) and Ln(OAr)3(THF)2 as a novel precatalyst for addition of amines to carbodiimides: influence of aryloxide group

Reaction of Ln(OAr(1))(3)(THF)(2) (Ar(1)= [2,6-((t)Bu)(2)-4-MeC(6)H(2)] with carbodiimides (RNCNR) in toluene afforded the RNCNR coordinated complexes (Ar(1)O)(3)Ln(NCNR) (R = (i)Pr (isopropyl), Ln = Y (1) and Yb (2); R = Cy (cyclohexyl), Ln = Y (3)) in high yields. Treatment of 1 and 2 with 4-chloroaniline, respectively, at a molar ratio of 1:1 yielded the corresponding monoguanidinate complex (Ar(1)O)(2)Y[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (4) and (Ar(1)O)(2)Yb[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (5). Complexes 4 and 5 can be prepared by the reaction of Ln(OAr(1))(3)(THF)(2) with RNCNR and amine in toluene at a 1:1:1 molar ratio in high yield directly. A remarkable influence of the aryloxide ligand on this transformation was observed. The similar transformation using the less bulky yttrium complexes Y(OAr(2))(3)(THF)(2) (Ar(2) = [2,6-((i)Pr)(2)C(6)H(3)]) or Y(OAr(3))(3)(THF)(2) (Ar(3) = [2,6-Me(2)C(6)H(3)]) did not occur. Complexes Ln(OAr(1))(3)(THF)(2) were found to be the novel precatalysts for addition of RNCNR with amines, which represents the first example of catalytic guanylation by the lanthanide complexes with the Ln-O active group. The catalytic activity of Y(OAr(1))(3)(THF)(2) was found to be the same as that of monoguanidinate complex 4, indicating 4 is one of the active intermediates in the present process. The other intermediate, amide complex (Ar(1)O)(2)Ln[(2-OCH(3)-C(6)H(4)NH)(2-OCH(3)-C(6)H(4)NH(2))] (6), was isolated by protonolysis of 4 with 2-OCH(3)-C(6)H(4)NH(2). All the complexes were structurally characterized by X-ray single crystal determination.     

Infrared predissociation spectroscopy of M+ (C6H6)(1-4)(H2O)(1-2)Ar(0-1) cluster ions, M = Li, Na

Infrared predissociation (IRPD) spectra of Li(+)(C(6)H(6))(1-4)(H(2)O)(1-2)Ar(0-1) and Na(+)(C(6)H(6))(2-4)(H(2)O)(1-2)Ar(1) are presented along with ab initio calculations. The results indicate that the global minimum energy structure for Li(+)(C(6)H(6))(2)(H(2)O)(2) has each water forming a π-hydrogen bond with the same benzene molecule. This bonding motif is preserved in Li(+)(C(6)H(6))(3-4)(H(2)O)(2)Ar(0-1) with the additional benzene ligands binding to the available free OH groups. Argon tagging allows high-energy Li(+)(C(6)H(6))(2-4)(H(2)O)(2)Ar isomers containing water-water hydrogen bonds to be trapped and detected. The monohydrated, Li(+) containing clusters contain benzene-water interactions with varying strength as indicated by shifts in OH stretching frequencies. The IRPD spectra of M(+)(C(6)H(6))(1-4)(H(2)O)(1-2)Ar are very different for lithium-bearing versus sodium-bearing cluster ions emphasizing the important role of ion size in determining the most favorable balance of competing noncovalent interactions.     

Cyclopropenylidene carbene ligands in palladium catalysed coupling reactions: carbene ligand rotation and application to the Stille reaction

Reaction of [Pd(PPh(3))(4)] with 1,1-dichloro-2,3-diarylcyclopropenes gives complexes of the type cis-[PdCl(2)(PPh(3))(C(3)(Ar)(2))] (Ar = Ph 5, Mes 6). Reaction of [Pd(dba)(2)] with 1,1-dichloro-2,3-diarylcyclopropenes in benzene gave the corresponding binuclear palladium complexes trans-[PdCl(2)(C(3)(Ar)(2))](2) (Ar = Ph 7, p-(OMe)C(6)H(4)8, p-(F)C(6)H(4)9). Alternatively, when the reactions were performed in acetonitrile, the complexes trans-[PdCl(2)(NCMe)(C(3)(Ar)(2))] (Ar = Ph 10, p-(OMe)C(6)H(4)11 and p-(F)C(6)H(4)) 12) were isolated. Addition of phosphine ligands to the binuclear palladium complex 7 or acetonitrile adducts 11 and 12 gave complexes of the type cis-[PdCl(2)(PR(3))(C(3)(Ar)(2))] (Ar = Ph, R = Cy 13, Ar = p-(OMe)C(6)H(4), R = Ph 14, Ar = p-(F)C(6)H(4), R = Ph 15). Crystal structures of complexes 6·3.25CHCl(3), 10, 11·H(2)O and 12-15 are reported. DFT calculations of complexes 10-12 indicate the barrier to rotation about the carbene-palladium bond is very low, suggesting limited double bond character in these species. Complexes 5-9 were tested for catalytic activity in C-C coupling (Mizoroki-Heck, Suzuki-Miyaura and, for the first time, Stille reactions) and C-N coupling (Buchwald-Hartwig amination) showing excellent conversion with moderate to high selectivity.