Using oxidized carbon nanotubes as matrix for analysis of small molecules by MALDI-TOF MS

Oxidized carbon nanotubes are tested as a matrix for analysis of small molecules by matrix assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS). Compared with nonoxidized carbon nanotubes, oxidized carbon nanotubes facilitate sample preparation because of their higher solubility in water. The matrix layer of oxidized carbon nanotubes is much more homogeneous and compact than that of nonoxidized carbon nanotubes. The efficiency of desorption/ionization for analytes and the reproducibility of peak intensities within and between sample spots are greatly enhanced on the surface of oxidized carbon nanotubes. The advantage of the oxidized carbon nanotubes in comparison with alpha-cyano-4-hydroxycinnamic acid (CCA) and carbon nanotubes is demonstrated by MALDI-TOF-MS analysis of an amino acid mixture. The matrix is successfully used for analysis of synthetic hydroxypropyl beta-cyclodextrin, suggesting a great potential for monitoring reactions and for product quality control. Reliable quantitative analysis of jatrorrhizine and palmatine with a wide linear range (1-100 ng/mL) and good reproducibility of relative peak areas (RSD less than 10%) is achieved using this matrix. Concentrations of jatrorrhizine (8.65 mg/mL) and palmatine (10.4 mg/mL) in an extract of Coptis chinensis Franch are determined simultaneously using the matrix and a standard addition method.     

MALDI-TOF-MS analysis of small molecules using modified mesoporous material SBA-15 as assisted matrix

Mesoporous silica, SBA-15 was successfully functionalized with quinoline moiety, and was applied as a matrix in the MALDI-TOF-MS analysis of small molecules. The modified SBA-15 material [SBA-15-8-(3-(triethoxysilyl)propoxy) quinoline, SBA-15-8QSi] was obtained by using calcined SBA-15 and 8-hydroxy quinoline. The structure of the functionalized mesoporous material was systemically characterized by TEM, the N₂ adsorption-desorption isotherm technique and FT-IR spectra. Compared with DHB and SBA-15, SBA-15-8QSi demonstrated several advantages in the analysis of small molecules with MALDI-TOF-MS, such as less background interference ions, high homogeneity, and better reproducibility. Based on these results, the various analytical parameters were optimized. The ideal operating conditions were (1) methanol used as the dissolving solvent; (2) sample first dropping method; (3) a ratio between the analyte and the matrix of 3.5:10. Under these optimization conditions, a low detection limit (8 pmol for L-Arginine-HCl) and high reproducibility (≤29%) were obtained. This technique was successfully applied to the analysis of various types of small molecules, such as saccharides, amino acids, metabolites, and natural honey.     

Monitoring enzyme reaction and screening enzyme inhibitor based on MALDI-TOF-MS platform with a matrix of oxidized carbon nanotubes

A matrix assisted laser desorption/ionization time-of-flight mass spectrometry platform for quantitatively monitoring enzyme activity and screening enzyme inhibitors has been demonstrated. The described method employs a new matrix of oxidized carbon nanotubes. Compared with the traditional fluorescence approach, this label-free method has the advantage of directly identifying the substrates and products in enzymatic reactions. Moreover, the method could be conveniently carried out with any commercial mass spectrometer without modification. We quantitatively monitored the acetylcholinesterase activity and screened acetylcholinesterase inhibitors with a detection rate of about 3.3 s per sample.     

Oxidized carbon nanotubes as matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometric analysis of biomolecules

Oxidized carbon nanotubes (CNTs), which can form a stable homogeneous suspension in water close to a solution phase, were synthesized and used for matrix-assisted desorption/ionization mass spectrometric (MALDI-MS) analysis of biomolecules. Infrared (IR) spectra, transmission electron microscopy (TEM) and particle size analysis were used for the characterization of the oxidized CNTs. The results indicate that the physical structure of the CNTs was not damaged, but carboxylate groups were introduced onto the surface of the CNTs. In addition, impurities including amorphous carbon, which is one of the main reasons for ion source contamination, were destroyed by the oxidization. The carboxyl groups on the oxidized surface of the CNTs can not only provide an additional proton source, but can also increase the surface polarity and solubility of the CNTs, making it easier to manipulate which is important for MALDI analysis of some biomolecules, especially larger peptides and proteins. The oxidized CNTs were successfully applied to the analysis of neutral oligosaccharides, peptides, and insulin, and thus promise to be an efficient matrix for MALDI-MS analysis of biomolecules.     

High-sensitivity matrix-assisted laser desorption/ionization Fourier transform mass spectrometry analyses of small carbohydrates and amino acids using oxidized carbon nanotubes prepared by chemical vapor deposition as matrix

In matrix-assisted laser desorption/ionization (MALDI) Fourier transform mass spectrometry (FTMS) analyses of small oligosaccharides and amino acids, high sensitivities for oligosaccharides (10 fmol) were obtained by introducing oxidized carbon nanotubes (CNTs) with short and open-end structure as valuable matrix. The CNTs were deposited in porous anodic alumina (PAA) templates by chemical vapor deposition. Transmission electron microscopy (TEM) images show that those CNTs include low levels of amorphous carbon. Thus, the background interference signals generally caused by amorphous carbon powder in CNTs can be reduced effectively. Experiments also confirmed that the FTMS signal intensity of CNTs prepared in PAA template is much lower than that of commercial multi-wall carbon nanotubes (MCNTs). Moreover, the purified process for CNTs with mixed acid (H₂SO₄ and HNO₃) also contributed to the minimization of background. Intense signals corresponding to alkali cation adduct of neutral carbohydrates and amino acids have been acquired. In addition, reliable quantitative analyses for urine and corn root were also achieved successfully. The present work will open a new way to the application of oxidized CNTs as an effective matrix in MALDI MS research.     

Capillary electrophoretic analysis of neutral carbohydrates using ionic liquids as background electrolytes

In this study, ionic liquids (ILs) as BGE additives were applied for the analysis of neutral carbohydrates in CE. The ILs served primarily as chromophores for indirect UV detection. The influence of imidazolium-based ionic liquids on the separation, detection limits and mobility of underivatized neutral carbohydrates was investigated. BGEs consisting of 10-50 mM of ILs at pH 12.4 without other additives provided fast separation of neutral sugars. This method was used to determine sucrose, glucose and fructose in certain vegetable juices.     

Enrichment and detection of small molecules using magnetic graphene as an adsorbent and a novel matrix of MALDI-TOF-MS

Magnetic graphene composites were synthesized via a simple hydrothermal reaction, and the as-made composites were successfully applied as an adsorbent and a novel matrix in the enrichment and analysis of small molecules by matrix assisted laser desorption/ionization mass spectrometry.     

Facile filling of metal particles in small carbon nanotubes for catalysis

A versatile wet chemistry method is developed for filling of subnanometer sized metal particles in carbon nanotubes with a diameter smaller than 1.5 nm. As an example, we showed that a confined bi-component Pd-V catalyst exhibit a higher benzene hydroxylation activity compared with that within multi-walled carbon nanotubes.     

Pre-treatment of multi-walled carbon nanotubes for polyetherimide mixed matrix hollow fiber membranes

A facile and bio-inspired route for the preparation of pure and highly crystalline metastable α-AgVO(3) is presented. Three kinds of proteins (bovine hemoglobin, bovine serum albumin, and lysozyme) were employed as inducer, which had substantial effects on the nucleation and growth of α-AgVO(3). Moreover, the amount of proteins also played a key role over the morphology and crystalline of products. The VO(3)(-)/protein complex acted as a driver to induce the formation of metastable phase, which was confirmed by resonance Rayleigh scattering and UV-vis absorption spectra. The results indicated that tailoring an interaction between protein and inorganic molecules was the key in bio-inspired selective synthesis of metastable phase, which may find applications in the design of other new functional inorganic materials.     

Epoxy matrix composites reinforced with purified carbon nanotubes for thermal management applications

The role of carbon nanotube purification treatment as a means to improve the thermal properties of polymer matrix composites was investigated. Particular emphasis was placed on clarifying the processing‐property relationship in polymer composites for thermal management applications. The results indicated that purification treatment is critical to the thermal properties of derived polymer composites. Purification treatment can yield a twofold increase in composite thermal conductivity because of improved effectiveness in interfacial interaction and increased chemical purity of the filler. However, there is a trade‐off between the benefits and disadvantages associated with purification treatment, particularly when thermal and electrical properties are both concerned. Purification treatment gives rise to a sharp decrease in composite electrical conductivity by at least two orders of magnitude because of the lack of an effective percolating network. The effect of purification treatment on composite electrical properties is more significant than on its thermal properties.     

Sulfonated carbon nanocage as a catalyst for the per-O-acetylation of carbohydrates

We report an efficient per-O-acetylation of carbohydrates. The use was made of the sulfonated carbon nanocage with high specific surface area and uniform mesoporous structure as a recyclable heterogeneous catalyst. This protocol eliminates the need to involve pyridine and provides products in good to excellent yields.     

Application of carbon nanotubes as solid-phase extraction sorbent for analysis of chlorophenols in water samples

The aim of this work was to investigate the efficiency of various MWCNTs as SPE materials for the preconcentration of chlorophenols. The COOH-functionalized MWCNTs and MWCNTs were used as SPE sorbents. To evaluate the capability of MWCNTs for the preconcentration of chlorophenols from water samples, 2,4-chlorophenol, 4-chlorophenol, 2,4,6-chlorophenol, 2,6-chlorophenol, 3,4-chlorophenol, and 2-chlorophenol were used as model compounds. Chlorophenols were extracted with acetone, methanol, ethanol, and dichloromethane, and determined by gas chromatography–mass spectrometry. COOH-functionalized MWCNTs <8 nm were found to be the best sorbent for the tested chlorophenols. For COOH-functionalized MWCNTs <8 nm, the recovery rates for all chlorophenols were higher than 50% when acetone or ethanol was used as eluents. In the case of dichloromethane elution, recovery rates for chlorophenols were from 62.0% for 2,6-DCP to 116.8% for 2,4-DCP; only for 2,4,6-TCP was the recovery rate 30.6%. Similar percentage recoveries were achieved with methanol as the eluent.     

Single-walled carbon nanotubes chemiresistor aptasensors for small molecules: picomolar level detection of adenosine triphosphate

Here we report single walled-carbon nanotubes (SWNTs)-based chemiresistor aptasensors for highly sensitive and selective detection of weakly or uncharged molecules using the displacement format. As a proof-of-concept we demonstrate the detection of ATP, a small weakly charged molecule, by displacement of the ssDNA anti-ATP aptamer hybridized to a small capture oligonucleotide covalently attached on SWNTs, with picomolar sensitivity and selectivity over GTP.     

Matrix‐polymer‐functionalized multiwalled carbon nanotubes as a highly efficient toughening agent for matrix polymers

Matrix‐polymer‐functionalized multiwalled carbon nanotubes (MWCNTs) are demonstrated as a highly efficient toughening agent for matrix polymers. With poly(vinylidene fluoride) (PVDF) as the matrix polymer, the PVDF/MWCNT‐PVDF nanocomposite films show high toughness. With a small load amount of MWCNT‐PVDF (0.07 wt %), the nanocomposite film shows a yield point and a constant‐stress extension region in stress–strain tests, compared with the typical low‐extensibility feature of neat PVDF film. The PVDF/MWCNT‐PVDF‐0.7 film exhibits a 180‐fold increase of toughness and about 38‐fold increase in strain at break compared with neat PVDF film. This toughening effect is attributed to (a) homogeneous dispersion of MWCNT‐PVDF in PVDF, (b) the high efficiency of load‐transfer across MWCNT/PVDF interface, and (c) the long length of the MWCNTs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A magnetite/oxidized carbon nanotube composite used as an adsorbent and a matrix of MALDI-TOF-MS for the determination of benzo[a]pyrene

A magnetite/oxidized carbon nanotube composite, Fe(3)O(4)@SiO(2)/OCNT, was fabricated in a simple way, and it was successfully used as a magnetic solid-phase extraction sorbent and a significant matrix of the matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) for the detection of benzo[a]pyrene (BaP).     

Per-O-methylation of neutral carbohydrates directly from aqueous samples for gas chromatography and mass spectrometry analysis

Per-O-methylation of neutral carbohydrates in one step by adding dimethyl sulfoxide, powdered sodium hydroxide, and methyl iodide directly to aqueous sample is described. The influence of the water on the methylation reaction is investigated. Solid powdered sodium hydroxide is very hygroscopic and can scavenge the water from sample if an additional excess of sodium hydroxide is added. The degree of per-O-methylation of carbohydrates is checked by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Gas chromatography-mass spectrometry analysis of mono- and disaccharides from grape juice is presented.     

Blends of carbon blacks and multiwall carbon nanotubes as reinforcing fillers for hydrocarbon rubbers

The reinforcement of a styrene‐butadiene rubber (SBR) by single fillers—carbon black (CB) or multiwall carbon nanotubes (MWNTs)—or by mixtures of CB and MWNTs, is investigated. The morphologies, mechanical and electrical properties of the composites, are analyzed. A significant improvement in the tensile properties is observed for samples containing a dual phase. Using atomic force (AFM) and transmission electron (TEM) microscopies, we demonstrate that the double loading improves the dispersion of the nanotubes in SBR. Electrical measurements show lower resistivity and a lower percolation threshhold for composites containing blends of fillers, which provides further evidence of better dispersion. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 46: 1939–1951, 2008