An innovative impurity profiling of Avanafil using LC and LC-MS/MS with in-silico toxicity prediction

Degradation of the drug can lead to the formation of toxic substance hence drug quality and stability is a major concern by pharma regulators. A Selected phosphodiesterase type 5 inhibitor drug Avanafil (AV) structure has amide, arylchloro and hydroxide as functional groups which can easily eliminated during hydrolysis. Henceforth, thoroughly chemical stability of AV was carried out according to ICH guideline Q1A (R2). The drug and marketed tablet formulation undergoes degradation in hydrolytic (acid, base, neutral), thermal, photolytic, oxidative conditions and forms a total new sixteen degradation products (D.P.s) which were identified by LC, characterized by LC-MS/MS and probable degradation mechanism for each stress conditions are proposed. All sixteen D.P.s were identified by optimized LC conditions; C18 column using 10 mM ammonium acetate: ACN (60:40, v/v), pH 4.5 as mobile phase at 0.9 mL min⁻¹ of flow rate, 239 nm wavelength at 20 °C column temperature and the method being LC-MS compatible characterized by LC-MS/MS confirmed by relative retention time (RRT). The structure of D.P.s was confirmed from the fragmentation pattern obtained by LC-MS/MS and further probable degradation mechanism for each stress condition is proposed. The drug and its marketed tablet formulation showed similar degradation peaks which were confirmed using RRT, photodiode array (PDA) and LC-MS. Drug degradation happens due to nucleophilic substitution reaction, amide hydrolysis, electron withdrawing properties of amide, dechlorination and bond cleavage due to energy. The amide group in AV structure can undergo hydrolysis, while due to aryl chloride and hydroxide group in structure it undergoes photodecomposition. A comprehensive stress study reveals that AV is more prone to degrade in light, temperature and moisture; hence AV requires proper storage condition temperature below 25 °C with protection to light and moisture. In silico toxicity prediction of physicochemical properties revealed that all the physicochemical parameters of impurities were within the acceptable limit which indicates that no impurity is at any risk of toxicity. In detail, the LC-MS/MS compatible AV degradation study is fully validated as per ICH Q2 (R1) guideline.     

Characterization of degradation products of Ivabradine by LC‐HR‐MS/MS: a typical case of exhibition of different degradation behaviour in HCl and H2SO4 acid hydrolysis

A validated stability‐indicating HPLC method was established, and comprehensive stress testing of ivabradine, a cardiotonic drug, was carried out as per ICH guidelines. Ivabradine was subjected to acidic, basic and neutral hydrolysis, oxidation, photolysis and thermal stress conditions, and the resulting degradation products were investigated by LC‐PDA and LC‐HR‐MS/MS. The drug was found to degrade in acid and base hydrolysis. An efficient and selective stability assay method was developed on Phenomenex Luna C18 (250 × 4.6 mm, 5.0 µm) column using ammonium formate (10 mM, pH 3.0) and acetonitrile as mobile phase at 30 °C in gradient elution mode. The flow rate was 0.7 ml/min and detection wavelength was 286 nm. A total of five degradation products (I‐1 to I‐5) were identified and characterized by LC‐HR‐MS/MS in combination with accurate mass measurements. The drug exhibited different degradation behaviour in HCl and H₂SO₄ hydrolysis conditions. It is a unique example where two of the five degradation products in HCl hydrolysis were absent in H₂SO₄ acid hydrolysis. The present study provides guidance to revise the stress test for the determination of inherent stability of drugs containing lactam moiety under hydrolytic conditions. Most probable mechanisms for the formation of degradation products have been proposed on the basis of a comparison of the fragmentation pattern of the drug and its degradation products. In silico toxicity revealed that the degradation products ( I‐2 to I‐5 ) were found to be severe irritants in case of ocular irritancy. The analytical assay method was validated with respect to specificity, linearity, range, precision, accuracy and robustness. Copyright © 2015 John Wiley & Sons, Ltd.     

Identification and characterization of stressed degradation products of metoprolol using LC/Q-TOF-ESI-MS/MS and MS(n) experiments

A rapid, specific and reliable isocratic high-performance liquid chromatography combined with quadrupole time-of-flight electrospray ionization tandem mass spectrometry (LC/Q-TOF-ESI-MS/MS) method has been developed and validated for the identification and characterization of stressed degradation products of metoprolol. Metoprolol, an anti-hypertensive drug, was subjected to hydrolysis (acidic, alkaline and neutral), oxidation, photolysis and thermal stress, as per ICH-specified conditions. The drug showed extensive degradation under oxidative and hydrolysis (acid and base) stress conditions. However, it was stable to thermal, neutral and photolysis stress conditions. A total of 14 degradation products were observed and the chromatographic separation of the drug and its degradation products was achieved on a C(18) column (4.6 × 250 mm, 5 μm). To characterize degradation products, initially the mass spectral fragmentation pathway of the drug was established with the help of MS/MS, MS(n) and accurate mass measurements. Similarly, fragmentation pattern and accurate masses of the degradation products were established by subjecting them to LC-MS/QTOF analysis. Structure elucidation of degradation products was achieved by comparing their fragmentation pattern with that of the drug. The degradation products DP(2) (m/z 153) and DP(14) (m/z 236) were matched with impurity B, listed in European Pharmacopoeia and British Pharmacopoeia, and impurity I, respectively. The LC-MS method was validated with respect to specificity, linearity, accuracy and precision.     

LC–MS/MS method for the characterization of the forced degradation products of Entecavir

A rapid, specific, and reliable isocratic LC–MS/MS method has been developed and validated for the identification and characterization of the stressed degradation products of Entecavir (ETV). ETV, an antiviral drug, was subjected to hydrolysis (acidic, alkaline, and neutral), oxidation, photolysis and thermal stress, as per the international conference on harmonization specified conditions. The drug showed extensive degradation under oxidative and acid hydrolysis stress conditions. However, it was stable to thermal, acidic, neutral, and photolysis stress conditions. A total of five degradation products were observed and the chromatographic separation of the drug and its degradation products were achieved on a Waters Symmetry C₁₈ (250 mm × 4.6 mm, id, 5 μm) column using 20 mM ammonium acetate (pH 3)/acetonitrile (50:50, v/v) as a mobile phase. The degradation products were characterized by LC–MS/MS and its fragmentation pathways were proposed. The LC–MS method was validated with respect to specificity, linearity, accuracy, and precision. No previous reports were found in the literature regarding the degradation behavior of ETV.     

Determination of lumiracoxib by a validated stability‐indicating MEKC method and identification of its degradation products by LC‐ESI‐MS studies

A stability‐indicating MEKC method was developed and validated for the analysis of lumiracoxib (LMC) in pharmaceutical formulations using nimesulide as the internal standard (IS). Optimal conditions for the separation of LMC and degradation products were investigated. The method employed 50 mM borate buffer and 50 mM anionic detergent SDS solution at pH 9.0. MEKC method was performed on a fused‐silica capillary (50 μm id; effective length, 40 cm) maintained at 30°C. The applied voltage was 20 kV and photodiode array (PDA) detector was set at 208 nm. The method was validated in accordance with the International Conference on Harmonisation requirements. The stability‐indicating capability of the method was established by enforced degradation studies combined with peak purity assessment using PDA detection. The degradation products formed under stressed conditions were investigated by LC‐ESI‐MS and the two degraded products were identified. MEKC method was linear over the concentration range of 5–150 μg/mL (r²=0.9999) of LMC. The method was precise, accurate, with LOD and LOQ of 1.34 and 4.48 μg/mL, respectively. The robustness was proved by a fractional factorial design evaluation. The proposed MEKC method was successfully applied for the quantitative analysis of LMC in tablets to support the quality control.     

Determination of primary bond scissions by mass spectrometric analysis of ultrasonic degradation products of poly(ethylene oxide‐block‐propylene oxide) copolymers

Ultrasonic degradation of poly(ethylene oxide‐block‐propylene oxide) copolymers consisting of a hydrophilic and a hydrophobic portion was studied with the aim to determine the location of bonds involved in the initial scission of the copolymers. LC–APCI‐IT‐MS and LC–APCI‐orbitrap‐MS were used for the detailed structural analysis of degradation products. The results indicated that initial bond scissions occurred principally at the boundary regions between backbones of polyethylene oxide (PEO) and polypropylene oxide (PPO) chains. Further structural analysis revealed the presence of oxygen adducts in the degradation products. Comparison with a thermal degradation carried out in helium atmosphere, one can conclude that the oxygen adducts are formed by radical reaction with water or dissolving oxygen molecules. The study demonstrated that chemical reactions as well as physical bond stress scissions are involved in the ultrasonic degradation of the copolymers. Copyright © 2010 John Wiley & Sons, Ltd.     

High-performance liquid chromatography-mass spectrometry of an osteocalcin derivative.

High-performance liquid chromatography (HPLC) was combined on-line with electrospray ionization mass spectrometry (ESI-MS) for structural analysis of a synthetic osteocalcin derivative and its degradation products. Initial determination of amino acid sequence of the synthetic peptide was performed after tryptic degradation. Hydrolytic degradation of the osteocalcin derivative was studied under different pH conditions: pH 2, pH 7 and pH 10 at 60 degrees C up to 20 h. According the HPLC-ESI-MS results, the chemical stability was dependent on pH. Two major degradation products and a number of other fragments were obtained in acidic solution, whereas the osteocalcin molecule was rather stable in neutral and alkaline conditions.     

Application of liquid chromatography-two-dimensional nuclear magnetic resonance spectroscopy using pre-concentration column trapping and liquid chromatography-mass spectrometry for the identification of degradation products in stressed commercial amlodipine maleate tablets

Application of the HPLC hyphenated techniques of LC-two-dimensional (2D) NMR using pre-concentration column trapping and LC-MS was demonstrated by the identification of two major degradation products, DP-1 and DP-2, in stressed commercial tablets of amlodipine maleate. The molecular formulas were estimated by LC-MS. Sample pre-concentration by column trapping was conducted to obtain adequate 2D-NMR signals by reducing the peak widths of the degradation products and making sure that the maximum amount of each component was inside the flow cell for NMR detection. Double-quantum filtered correlation spectroscopy (DQF-COSY) was applied to identify DP-1 as beta-N-lactosylamlodipine by suppressing the residual water signal without affecting the sample signal and by measuring the coupling constant of the lactose anomeric proton. Heteronuclear multiple bond coherence spectroscopy (HMBC) was applied to characterize DP-2 as an aspartic acid derivative of amlodipine by detecting long-range CH correlations. The chemical structures of the degradation products could be successfully elucidated unambiguously without an isolation process.     

CCl4 对左旋氧氟沙星超声降解的影响

研究了CCl4对超声降解喹诺酮类抗生素左旋氧氟沙星(Levofloxacin)的影响, 考察了CCl4添加量、 超声功率、 溶液初始pH值及左旋氧氟沙星初始浓度等影响因素, 并采用HPLC和LC-MS/MS对超声降解产物进行了初步分析. 结果表明, CCl4增强了左旋氧氟沙星的超声降解, 当反应液体积为50 mL, 超声35 min时, 随着CCl4体积分数的增大(0~0.06%), 左旋氧氟沙星的降解率由1.9%增至69.2%; 超声功率为100~200 W时, 降解率随着功率的升高而增大, 功率为200~400 W时降解率有所降低; pH值对左旋氧氟沙星的超声降解影响很大, pH =7.14时容易超声降解, pH过低或过高均导致降解率显著减小; CCl4的体积分数一定时, 左旋氧氟沙星的降解率随其初始浓度的增大而降低; 左旋氧氟沙星的降解率在33~49 ℃时最大. CCl4强化超声降解左旋氧氟沙星过程主要是由·OH和一系列氯自由基参与的反应. HPLC分析发现, 降解过程中同时生成了2个产物, 并通过LC-MS/MS对其进一步鉴定.     

Applications of hyphenated LC-MS techniques in pharmaceutical analysis

In pharmaceutical analysis, ie the analytical development and quality control of drug substances and dosage forms, mass spectrometry (MS) combined with chromatographic separation is perhaps the most powerful technique for the monitoring, characterization and identification of impurities. The addition of further dimensions to chromatographic separations by hyphenated techniques offers unique possibilities of efficiently supporting pharmaceutical development and ensuring the quality and safety of pharmaceuticals. However, the ionization process in MS involves some characteristics which have to be recognized and taken into account for an appropriate application as well as the evaluation of the results. Chromatographic method development and validation can be supported very effectively by MS detection, eg in the investigation of coelution and peak purity. Chiral amino acid analysis is largely facilitated by the mass-specific detection of the derivatized amino acid enantiomers, which ignores all other interfering substance peaks. Examples are presented for the use of LC-MS-MS fragmentation and high-resolution MS in the structural elucidation of degradation products and impurities. LC-MS is systematically applied to monitor impurity profiles during pharmaceutical development and scaling up and supports the safety evaluation of batches used in clinical studies.     

Stress degradation study and structure characterization of oxidation degradation product of dexlansoprazole using liquid chromatography-mass spectrometry/time of flight,liquid chromatography-tandem mass spectrometry and nuclear magnetic resonance

The present study deals with the forced degradation behavior of dexlansoprazole under International Conference on Harmonisation (ICH) prescribed stress conditions. The drug was found to be more labile under acid, base, neutral, oxidative hydrolysis and thermal stress, while it was moderately stable under photolytic conditions. The known and unknown degradation products were separated on a C-18 column using a stability-indicating method. Liquid chromatography-mass spectrometry (LC-MS) analysis was performed for all the degradation studies. Isolation and structure characterization of oxidation degradation products were executed using sophisticated tools, viz. preparative high performance liquid chromatography (HPLC), liquid chromatography-mass spectrometry/time of flight (LC-MS/TOF), liquid chromatography-tandem mass spectrometry (LC-MS/MS), and nuclear magnetic resonance (NMR). This study demonstrates an ample methodology of degradation studies and structure elucidation of unknown degradation products of dexlansoprazole, which helps in the development and stability study of active pharmaceutical ingredients and formulated products.     

Kinetic study of the degradation of forskolin in aqueous systems by stability-indicating HPLC method and identification of its degradation products

The degradation kinetics of forskolin in aqueous solution was investigated qualitatively and quantitatively. Two degradation products were isolated and identified as isoforskolin and forskolin D by liquid chromatography–tandem mass spectrometry (LC–MS/MS) and nuclear magnetic resonance (NMR) spectroscopy. A stability-indicating high-performance liquid chromatography (HPLC) method was developed and validated for the quantification of forskolin and its degradation products. Chromatographic separation was performed on a Luna C₁₈ column with acetonitrile–water (65:35, v/v) as the mobile phase. The flow rate was kept at 1 mL/min, and the detection wavelength was 210 nm. The kinetic study of forskolin was carried out in aqueous solutions of pH 1.5–8.5 at 37, 50, 65, and 80°C. The degradation rate of forskolin increases with increasing temperature. Forskolin is relatively stable in the pH range 3.5–6.5, but its stability decreases when the pH is outside this range. In the pH range 6.5–8.5, the forskolin degradation follows pseudo-first-order kinetics. Based on the structural identification and quantitative analysis of the degradation products, a possible pathway for forskolin degradation is proposed. Forskolin can be converted to isoforskolin rapidly, and both forskolin and isoforskolin can further decompose to forskolin D.     

Field amplified sample injection-capillary electrophoresis-tandem mass spectrometry for the analysis of acrylamide in foodstuffs

This paper shows the applicability of capillary electrophoresis (CE) coupled to mass spectrometry (MS) for the analysis of acrylamide (AA) in foodstuffs. In order to obtain an ionisable compound amenable to be analysed by CE, acrylamide was derivatised with 2-mercaptobenzoic acid. Spectra in positive and negative modes were studied in order to select the best ionisation mode and multistep tandem mass spectrometry was used to obtain structural information. Maximum signal was observed when negative mode was used and MS/MS and MS3 were selected for quantitation and confirmation, respectively. For the separation, a fused-silica capillary of 80 cm and 50 microm I.D. and 35 mM ammonium formate/ammonia solution at pH 10 as running electrolyte were used. The applicability of field amplified sample injection (FASI) in reversed polarity was evaluated in order to decrease detection limits. The developed FASI-CE-MS/MS method provided a detection limit of 8 ng g(-1) and good linearity (r=0.999) and precision (day-to-day lower than 15%). The method has been applied to the analysis of different representative food products and the results were compared with those obtained by LC-MS/MS.     

Stress Degradation Studies of Anagliptin,Development of Validated Stability Indicating Method,Degradation Kinetics Study,Identification and Isolation of Degradation Products

A gradient-specific stability indicating HPLC method was developed and validated for the determination of the antidiabetic agent anagliptin in laboratory mixtures. Reversed-phase chromatography was performed using a Shimadzu LC-20 AD pump (binary), Shimadzu PDA M-20A diode array detector, and Waters Symmetry C-18 column (150?×?4.6 mm, 3.5 µm) maintained at a column oven temperature of 40 °C with UV detection at 247 nm. A gradient program was run at flow rate of 1 mL min^?1. Mobile phase A consisted of a mixture of acetate buffer(10 mm) pH 5/methanol/acetonitrile in the ratio of 90:5:5. Mobile phase B consisted of a mixture of acetate buffer (10 mm) pH 5/methanol/acetonitrile in the ratio of 50:25:25. The method was validated according International Conference of Harmonization (ICH) guidelines. Linearity was observed in the concentration range of 10–120 µg/mL with regression coefficient r²(0.999). The LOD was found to be 7.8 µg/mL and LOQ was found to be 22.68 µg/mL. Anagliptin was subjected to stresses such as acidic, alkali, oxidation, photolysis, and thermal conditions. The proposed method was validated as per ICH guidelines and was found to be accurate, precise, and specific. The drug showed significant degradation in alkaline and oxidative conditions. Alkaline and oxidative degradation followed first-order kinetics. Degradation rate constant and half-lives were determined. Degradation products in alkaline and oxidative conditions were identified by LC–MS. One major degradation product was isolated from each condition by preparative HPLC. These degradation products were characterized by ¹H NMR, ¹³C NMR, DEPT, D₂O exchange, MS/MS, HRMS, and IR techniques. From the spectral data the alkaline degradation product was characterized as 1-{2-[1-(2-methylpyrazolo[1,5-a]pyrimidine-6-carboxamido)-methyl-propan-2-yl-amino]acetyl}pyrrolidine-2-carboxamide. The oxidative degradation product was characterized as N-[2-({2-[(2S)-2-cyanopyrrolidin-1-yl]-2-oxoethyl}amino)-2-methylpropyl]-2-methylpyrazolo-[1,5-a]pyrimidine-N-oxido-6-carboxamide.     

Analysis of MS/MS fragmentation of taxoids

The fragmentation pathways of seven types of taxoids were investigated by using a LC-MS/MS method, namely: (1) neutral taxoids with a C-4(20) double bond; (2) taxoids with a C-4(20) double bond and oxygenation at C-14; (3) 5-cinnamoyl taxoids with a C-4(20) double bond; (4) a basic taxoid with a C-4(20) double bond; (5) a taxoid with a C-4(20) epoxide; (6) taxoids with an oxetane ring; and (7) taxoids with an oxetane ring and a phenylisoserine C-13 side chain. Depending on the class of core structure and the substitution pattern, each taxoid gave either the molecular adduct ion [M+NH4]+ or [M+H]+. In the MS/MS, the molecular adduct ion gave characteristic product ions corresponding to the loss of water, acetic acid, benzoic acid, and cinnamic acid or the phenylisoserine group. These could reflect the difference of the substitutions and structural modifications and should be utilized for the structure elucidation oftaxoids by LC-MS.     

液相色谱-飞行时间质谱、液相色谱-串联质谱和核磁共振用于右旋兰索拉唑的强制降解研究和氧化降解产物的结构表征(英文)

The present study deals with the forced degradation behavior of dexlansoprazole under International Conference on Harmonisation(ICH)prescribed stress conditions. The drug was found to be more labile under acid,base,neutral,oxidative hydrolysis and thermal stress,while it was moderately stable under photolytic conditions. The known and unknown degradation products were separated on a C-18 column using a stabilityindicating method. Liquid chromatography-mass spectrometry(LC-MS)analysis was performed for all the degradation studies. Isolation and structure characterization of oxidation degradation products were executed using sophisticated tools,viz. preparative high performance liquid chromatography(HPLC),liquid chromatographymass spectrometry / time of flight(LC-MS / TOF),liquid chromatography-tandem mass spectrometry(LC-MS /MS),and nuclear magnetic resonance(NMR). This study demonstrates an ample methodology of degradation studies and structure elucidation of unknown degradation products of dexlansoprazole,which helps in the development and stability study of active pharmaceutical ingredients and formulated products.     

液相色谱-串联质谱法测定水产品中麻醉剂MS-222残留

建立了液相色谱-串联质谱法测定水产品中麻醉剂3-氨基苯甲酸乙酯甲基磺酸盐(MS-222)残留量的方法。提取液为50%的甲醇及乙酸-乙酸钠缓冲溶液,提取液经C18固相萃取柱净化处理后用液相色谱-串联质谱仪进行测定,外标法定量。流动相为0.5%的甲酸溶液和乙腈(V:V=60:40),流速为0.2 mL/min。该方法的线性范围为0.001～1.0 mg/L,相关系数大于0.999,检出限为1μg/kg,定量限为2μg/kg。加标回收率可以达到80%～110%。     

Stress Studies and Identification of Degradation Products of Cephalexin Using LC–PDA and LC–MS/MS

A stability indicating RP-HPLC method for cephalexin has been developed and validated to identify and characterize potential degradation products. Drug was subjected to hydrolytic (acidic, basic, and neutral), oxidative, thermal, and photolytic stresses as per ICH guidelines Q1A (R2) and Q1B. Chromatographic separation was achieved on C8 column with mixture of ammonium acetate buffer pH 4.5 and acetonitrile in gradient mode as a mobile phase with PDA detection. Specificity of the method was established by peak purity studies. Method was validated as per ICH guideline Q2 (R1) for accuracy, precision, linearity, sensitivity, and robustness. Kinetics for each degradation condition was studied with respect to order of reaction and rate constant. Method was found to comply with acceptance criteria of validation parameters with respect to specificity (peak purity greater than 0.999) linearity (r ² greater than 0.99), accuracy (% recovery in the range of 98–102%), and precision (% RSD not more than 2). A total of six degradation products were generated in different stress conditions; these were identified and structures were proposed using LC–MS/MS. Cephalexin undergoes degradation in almost all the conditions. The developed stability indicating method is suitable for analysis of stability samples as it adequately separates all degradation products. Degradation products generated in photolytic and oxidative conditions are reported for the first time.     

Effect of Fusarium oxysporum f. sp. lycopersici on the degradation of humic acid associated with Cu, Pb, and Ni: an in vitro study

The intent of this work was to gain further insight on the fungus-assisted degradation/solubilization of humic acid and the related changes in metal-binding profiles. In the experimental design, Aldrich reagent humic acid (HA) or HA enriched with Cu, Pb, and Ni (HA(Me)) was added to Fusarium oxysporum f. sp. lycopersici cultures in vitro. The cultures were supplied by different carbon- and nitrogen-containing nutrients (glucose, Glc, or glutamate, Glu and ammonium, NH₄⁺, or nitrate, NO₃⁻, ions, respectively) in order to examine their possible effect on HA and HA(Me) decomposition. During the first 48 h of fungus growth, gradual acidification to pH 2 was observed in medium containing Glc + NH₄⁺, while for other cultures, alkalinization to pH 9 occurred and then, the above conditions were stable up to at least 200 h. Size exclusion chromatography (SEC) with UV/Vis detection showed progressive degradation and solubilization of both HA and HA(Me) with the increasing time of fungus growth. However, the molecular mass distributions of HA-related soluble species were different in the presence of metals (HA(Me)) as referred to HA and were also influenced by the composition of growth medium. The solubilization of Pb, Cu, and Ni and their association with HA molecular mass fractions were studied using inductively coupled plasma mass spectrometry (ICP-MS) detection. Under acidic conditions, relatively high concentrations of low-molecular-mass metallic species were found in culture supernatants, while in alkaline media, metal solubilization was generally poorer. In contrast to low pH culture, SEC-ICP-MS results obtained in alkaline supernatants indicated metal binding to degradation products of humic substances of MM > 5 kDa. In summary, the results of this study suggest that fungus-assisted degradation of HA and HA(Me) might be controlled using appropriate N- and C- sources required for fungus growth, which in turn would affect molecular mass distribution of soluble metallic species thus potentially influencing their actual bioaccessibility. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fluorometric determination of nitrite in natural waters with 3-aminonaphthalene-1,5-disulphonic acid by flow-injection analysis

Nitrite in river and sea-water was determined fluorometrically by flow-injection analysis. In acidic medium, nitrite was reacted with 3-aminonaphthalene-1,5-disulphonic acid (C-acid) to form the diazonium salt, which was converted into the fluorescent azoic acid salt in an alkaline medium. The carrier stream, into which the sample solution was injected, was distilled water. The reagent solution stream, which contained C-acid, EDTA and hydrochloric acid, was mixed with the carrier stream in a 13-m length of Teflon tubing (bore 0.5 mm) maintained at 90 degrees in a thermostatic bath. After passing through the mixing coil, the stream was mixed with an alkaline solution. The fluorescence intensity (excited at 365 nm) was measured at 470 nm. The detection limit (S N = 3) was 1 x 10(-9)M (14 ng 1 . nitrite-nitrogen) and the RSD of 10 injections of 10(-6)M nitrite was 0.4%. Analyses can be done at a rate of up to 45 hr .