Ruthenium-catalyzed [2 + 2 + 1] cocyclization of isocyanates, alkynes, and CO enables the rapid synthesis of polysubstituted maleimides

Intermolecular [2 + 2 + 1] cocyclization of isocyanates, alkynes, and CO (1 atm) proceeded smoothly in the presence of a catalytic amount of Ru3(CO)12 (3.3 mol %) in mesitylene at 130 degrees C for 3 approximately 42 h to give a variety of polysubstituted maleimides in excellent yields with high selectivity. The reaction may involve an azaruthenacyclopentenone intermediate derived from oxidative cyclization of an isocyanate and an alkyne on an active ruthenium species.     

CO2／H2和（CO／CO2）＋H2低压合成甲醇催化过程的本质

通过在Ｃｕ／ＺｎＯ／Ａｌ２Ｏ３催化剂上ＣＯ２＋Ｈ２，ＣＯ＋Ｈ２和（ＣＯ／ＣＯ２）＋Ｈ２催化反应动力学研究对合成甲醇动力学和反应机理进行了细致分析，提出合成甲醇的反应机理，解释了在（ＣＯ／ＣＯ２）＋Ｈ２合成甲醇过程中少量ＣＯ２的作用及合成甲醇的直接碳源。     

Diastereoselective [4 + 1] cycloaddition of alkenyl propargyl acetates with CO catalyzed by [RhCl(CO)2]2

A class of alkenyl propargyl acetates, RCH(OAc)C≡CC(CH(3))═CH(2) (5), are found to undergo [4 + 1] cycloaddition with CO (1 atm) in the presence of [RhCl(CO)(2)](2) in refluxing 1,2-dichloroethane to give cyclopentenones (6) in good yields. It has been demonstrated that, when the R group of 5 is a phenyl group bearing o-electron-withdrawing substituents, up to 10:1 diastereoselectivity and 96% yield can be achieved for the [4 + 1] cycloaddition. This process provides a convenient method to construct highly functionalized cyclopentenones that are useful in organic synthesis.     

Mechanistic and kinetic study of the CH3CO + O2 reaction

Potential-energy surface of the CH3CO + O2 reaction has been calculated by ab initio quantum chemistry methods. The geometries were optimized using the second-order Moller-Plesset theory (MP2) with the 6-311G(d,p) basis set and the coupled-cluster theory with single and double excitations (CCSD) with the correlation consistent polarized valence double zeta (cc-pVDZ) basis set. The relative energies were calculated using the Gaussian-3 second-order Moller-Plesset theory with the CCSD/cc-pVDZ geometries. Multireference self-consistent-field and MP2 methods were also employed using the 6-311G(d,p) and 6-311++G(3df,2p) basis sets. Both addition/elimination and direct abstraction mechanisms have been investigated. It was revealed that acetylperoxy radical [CH3C(O)OO] is the initial adduct and the formation of OH and alpha-lactone [CH2CO2(1A')] is the only energetically accessible decomposition channel. The other channels, e.g., abstraction, HO2 + CH2CO, O + CH3CO2, CO + CH3O2, and CO2 + CH3O, are negligible. Multichannel Rice-Ramsperger-Kassel-Marcus theory and transition state theory (E-resolved) were employed to calculate the overall and individual rate coefficients and the temperature and pressure dependences. Fairly good agreement between theory and experiments has been obtained without any adjustable parameters. It was concluded that at pressures below 3 Torr, OH and CH2CO2(1A') are the major nascent products of the oxidation of acetyl radicals, although CH2CO2(1A') might either undergo unimolecular decomposition to form the final products of CH2O + CO or react with OH and Cl to generate H2O and HCl. The acetylperoxy radicals formed by collisional stabilization are the major products at the elevated pressures. In atmosphere, the yield of acetylperoxy is nearly unity and the contribution of OH is only marginal.     

Atmospheric chemistry of linear perfluorinated aldehydes: dissociation kinetics of CnF2n+1CO radicals

Linear perfluorinated aldehydes (PFALs, CnF2n+1CHO) are important intermediate species in the atmospheric oxidation pathway of many polyfluorinated compounds. PFALs can be further oxidized in the gas phase to give perfluorinated carboxylic acids (PFCAs, CnF2n+1C(O)OH, n = 6, 12) which have been detected in animal tissues and at low parts per billion levels in human blood sera. In this paper, we report ab initio quantum chemistry calculations of the decarbonylation kinetics of CnF2n+1CO radicals. Our results show that CnF2n+1CO radicals have a strong tendency to decompose to give CnF2n+1 and CO under atmospheric conditions: the Arrhenius activation energies for decarbonylation of CF3CO, C2F5CO, and C3F7CO obtained using PMP4/6-311++G(2d,p) are 8.8, 6.6, and 5.8 kcal/mol, respectively, each of which is about 5 kcal/mol lower than the barrier for the corresponding nonfluorinated radicals. The lowering of the barrier for decarbonylation of CnF2n+1CO relative to that of CnH2n+1CO is well explained by electron withdrawal by F atoms that serve to weaken the critical C-CO bond. These results have important implications for the atmospheric fate of PFALs and the atmospheric pathways to PFCAs. The main effect of decarbonylation of CnF2n+1CO is to decrease the molar yield of CnF2n+1C(O)OH; if 100% of the CnF2n+1CO decompose, the yield of CnF2n+1C(O)OH must be zero. There is considerable scope for additional experimental and theoretical studies.     

Electronic sputtering produced by fission fragments on condensed CO and CO2

Condensed CO and CO2 are bombarded by approximately 65 MeV 252Cf fission fragments and the desorbed ions are analyzed by time-of-flight mass spectrometry as a function of target temperature, in the ranges 25-33 K and 75-91 K, respectively. Absolute desorption yields are measured up to complete ice sublimation. The mass spectra of both ice targets reveal the emission of: (1) low mass ions, produced by direct Coulomb interaction of the highly charged projectiles and delta-electrons with CO and CO2, and (2) pronounced series of cluster ions. The basic ice cluster structures (CO)n and (CO2)n are present in the emitted cluster series such as (CO)nCO+, (CO2)nCO2+, or (CO2)nCO3-. In the case of CO ice, however, the intense production of the series Cn+, Cn-, and (CO)mCn+ shows that Cn is the main cluster structure, consequence of a higher concentration of free carbon atoms in the nuclear track plasma of CO ice than in that of CO2 ice. Ion cluster abundance is observed to decrease exponentially with cluster mass. The decay constant is k(n) congruent with 0.13, about the same for series based on (CO)n and (CO2)n, but a factor 3.3 higher for the Cn series. The Cn clusters are formed by gas-phase condensation, but the (CO)n and (CO2)n clusters are produced by fracturing of the highly excited solid around the nuclear track. A dramatic reduction of the ion desorption yield is observed near T = 29 K for CO and near T = 85 K for CO2, when fast sublimation occurs and ice thickness vanishes. Close to sublimation temperature, the decay constant of the (CO)2Cn+ series increases due to a decreasing formation probability of large Cn clusters.     

Synthesis of macrocycles via cobalt-mediated [2 + 2 + 2] cycloadditions

We investigated the formation of macrocycles from alpha,omega-diynes in cobalt-mediated co-cyclotrimerization reactions. Long-chain alpha,omega-diynes underwent metal-mediated [2 + 2 + 2] cycloadditions with nitriles, cyanamides, or isocyanates in the presence of CpCo(CO)2 (Cp = cyclopentadienide) to yield pyridine-containing macrocycles, i.e., meta- and para-pyridinophanes, such as 5m/5p, 35m/35p, and 41m/41p. The regioselectivity of these reactions was affected by the length and type of linker unit between the alkyne groups, as well as by certain stereoelectronic factors. An analogous alpha,omega-cyano-alkyne, 28, combined with an alkyne to yield two isomeric meta-pyridinophanes, such as 5m and 29m, and an ortho cycloadduct (benzannulation product), such as 29o. We developed a reaction protocol for these cobalt-based [2 + 2 + 2] cycloadditions that involves markedly improved conditions such that this process offers a convenient, flexible synthetic approach to macrocyclic pyridine-containing compounds. For example, diyne 6 reacted with p-tolunitrile in 1,4-dioxane to give 7p and 7m (7:1 ratio) in 87% yield at a moderate temperature of ca. 100 degrees C in 24 h without photoirradiation or syringe-pump addition. Isocyanates were also effective reactants, as exemplified by the formation of 44p almost exclusively (44p:44m > 50:1) in 64% yield from diyne 8 and 2-phenylethylisocyanate. By using this improved protocol we were able to co-cyclotrimerize long-chain alpha,omega-diynes with alkynes in certain cases to demonstrate a successful macrocyclic variant of the Vollhardt reaction. For instance, diyne 6 reacted with dipropylacetylene to give paracyclophane 57p and benzannulene 57o (2:1 ratio) in 29% yield.     

超临界CO2+EtOH+CO+H2四元体系压力和温度变化规律及超临界性质的研究

在5～11MPa的范围内,利用恒容静态平衡法详细考察了CO2密度在0.542～0.590g/cm3范围的不同组成的超临界CO2+EtOH+CO+H2四元体系的压力和温度的变化规律,并测定了相应的临界温度和临界压力.模拟了超临界丙烯氢甲酰反应体系的相行为.结果发现,CO+H2加入量的增多可明显改变超临界CO2+EtOH+CO+H2四元体系的超临界性质,主要表现为该体系的临界温度随着CO和H2摩尔分数的增加而线性降低,临界压力随着CO和H2摩尔分数的增加而线性增加.在相同的CO和H2组成下,超临界四元体系的压力随着体系温度的增加而线性增加,并且p-T线的斜率基本相同.在相同温度下超临界四元体系的压力随着体系中CO和H2摩尔分数的增加线性增加,并且不同温度时的变化率基本相同.     

CO2 Fixation by Cu2+ and Zn2+ complexes of a terpyridinophane aza receptor. Crystal structures of Cu2+ complexes, pH-metric, spectroscopic, and electrochemical studies

The synthesis of the terpyridinophane-type polyamine 2,6,9,12,16-pentaaza[17]-(5,5' ')-cyclo-(2,2':6',2' ')-terpyridinophane heptahydrobromide tetrahydrate (L.7HBr.4H2O) is described. L presents six protonation constants with values in the range 9.21-3.27 logarithmic units. L interacts with Cu2+ and Zn2+ forming in both cases, neutral, protonated, and hydroxylated mono- and binuclear complexes whose constants have been calculated by potentiometry in 0.15 M NaClO4 at 298.1 K. The crystal structures of the compounds [Cu(HL-carb)(H2O)](ClO4)3.2H2O (1) and [Cu2(H2L)(CO3)]2(ClO4)8.9H2O (2) have been solved by X-ray diffraction. In 1, the metal center presents square pyramidal geometry. The base of the pyramid is formed by the three nitrogen atoms of pyridine and one oxygen atom of a CO2 group which is forming a carbamate bond with the central nitrogen atom of the polyamine chain. The axial position is occupied by a water molecule. In 2, one Cu2+ is bound by the three pyridine nitrogens and the other one by the three central nitrogen atoms of the polyamine chain. The square planar coordination geometry is completed by a carbonate group taken up from the atmosphere that behaves as a bridging mu,mu'-ligand between the two centers. The pH-metric titrations on the ternary Cu2+-L-carbonate and Zn2+-L-carbonate systems show the extensive formation of adduct species which above pH 6 are formed quantitatively in solution. The stoichiometries of the main species formed in solution at pH = 6.8 agree with those found in the crystalline compounds. CO2 uptake by the Zn2+ and Cu2+ 1:1 complexes in aqueous solution has also been followed by recording the variations in the band at ca. 300 nm. The formation of the Zn2+ carbamate moiety has been evidenced by 13C NMR and ESI spectroscopy.     

Mechanism and Rate Constants of the CH3+ CH2CO Reaction: A Theoretical Study

The mechanism of the reaction of ketene with methyl radical has been studied by ab initio CCSD(T)‐F12/cc‐pVQZ‐f12//B2PLYPD3/6‐311G** calculations of the potential energy surface. Temperature‐ and pressure‐dependent reaction rate constants have been computed using the Rice–Ramsperger–Kassel–Marcus (RRKM)–Master Equation and transition state theory methods. Three main channels have been shown to dominate the reaction; the formation of the collisionally stabilized CH₃COCH₂ radical and the production of the C₂H₅ + CO and HCCO + CH₄ bimolecular products. Relative contributions of the CH₃COCH₂, C₂H₅ + CO, and HCCO + CH₄ channels strongly depend on the reaction conditions; the formation of thermalized CH₃COCH₂ is favored at low temperatures and high pressures, HCCO + CH₄ is dominant at high temperatures, whereas the yield of C₂H₅ + CO peaks at intermediate temperatures around 1000 K. The C₂H₅ + CO channel is favored by a decrease in pressure but remains the second most important reaction pathway after HCCO + CH₄ under typical flame conditions. The calculated rate constants at different pressures are proposed for kinetic modeling of ketene reactions in combustion in the form of modified Arrhenius expressions. Only rate constant to form CH₃COCH₂ depends on pressure, whereas those to produce C₂H₅ + CO and HCCO + CH₄ appeared to be pressure independent.     

Experimental and theoretical studies of the reactions Y (a2D) + H2CO and Y (a2D) + CH3CHO

The reactions of ground state Y (a(2)D) with H(2)CO and CH(3)CHO were studied at a range of collision energies in crossed molecular beams. For reaction with H(2)CO, three product channels were observed: formation of YH(2) + CO, YCO + H(2), and YHCO + H. Reaction with CH(3)CHO led to three analogous product channels involving formation of HYCH(3) + CO, YCH(2)CO + H(2), and YCH(3)CO + H. The calculated CCSD(T) energetics and DFT geometries for key intermediates in both reactions, together with RRKM theory, are used to calculate a priori the branching ratios between various product channels. These calculated values are compared to those obtained experimentally.     

Liquid CO2 extraction of Jasminum grandiflorum and comparison with conventional processes

The concrete (0.35%) of Jasminum grandiflorum L. flowers was prepared by extraction in n-pentane, and the absolute (0.27%) by fractionation of the n-pentane extract (concrete) with cold methanol. Direct extraction of flowers with liquid CO2 gave a relatively fat-free product in 0.26% yield. The liquid CO2 extract was enriched with terpenoids and benzenoids, thus providing the organoleptically accepted product. The major compounds, such as benzyl acetate, (E,E)-alpha-farnesene and (Z)-3-hexenyl benzoate, along with compounds like indole, methyl anthranilate, (Z)-jasmone, (Z)-methyl jasmonoate and (Z)-methyl epi-jasmonoate, are responsible for the high diffusivity of the jasmine fragrance. These compounds have been obtained with improved recoveries in the liquid CO2 extract. On the other hand, the yield of the essential oil was poor (0.05%), and some polar compounds (oxygenated terpenoids) were recovered in less amounts in comparison with either the n-pentane or liquid CO2 extract.     

Electrode Potentials of Cells with an Electrolyte Based on Zirconium Dioxide in Gas Mixtures N2+ O2+ CO2+ CO: A Platinum Electrode

Steady-state potentials of various platinum electrodes are measured in cells containing electrolyte ZrO₂+ Y₂O₃(10 mol %) in the temperature range 673–773 K in binary equilibrium gas mixtures N₂+ O₂and CO + CO₂, as well as in four-component nonequilibrium gas mixtures N₂+ O₂+ CO₂+ CO containing 0–3 vol % CO and 0–10 vol % O₂. Adding CO to a gas mixture makes the electrode potential deviate from equilibrium, which is explained by chemisorption of CO on the electrode. The oxygen, which is adsorbed on platinum, interacts with CO; as a result, CO₂undergoes desorption and the surface concentration of CO drops.     

Rhodium(I)-Catalyzed Three-Component [4+2+1] Cycloaddition of Two Vinylallenes and CO

Transition metal-catalyzed [4+2+1] reactions of dienes (or diene derivatives such as vinylallenes), alkynes/alkenes, and CO (or carbenes) are expected to be the most straightforward approach to synthesize challenging seven-membered ring compounds, but so far only limited successes have been realized. Here, an unexpected three-component [4+2+1] reaction between two vinylallenes and CO was discovered to give highly functionalized tropone derivatives under mild conditions, where one vinylallene acts as a C₄ synthon, the other vinylallene as a C₂ synthon, and CO as a C₁ synthon. It was proposed that this reaction occurred via oxidative cyclization of the diene part of one vinylallene molecule, followed by insertion of the terminal alkene part of the allene moiety in another vinylallene, into the Rh−C bond of five-membered rhodacycle. Then, CO insertion and reductive elimination gave the [4+2+1] cycloadduct. Further experimental exploration of why ene/yne-vinylallenes and CO gave monocyclic tropone derivatives instead of 6/7-bicyclic ring products were reported here.     

[3+2]- Versus [4+2]-cycloaddition reactions of 3-methylsulfanyl-2-arylazo-3-(pyrrolidin-1-yl)acrylonitriles with N-substituted maleimides involving pyrrolidine-derived azomethine ylides

3-Methylsulfanyl-2-arylazo-3-(pyrrolidin-1-yl)acrylonitriles do not enter into [4+2]-cycloaddition reactions with maleimides to form the expected pyrrolo-pyridazines. Instead the formation of novel pyrrolo-pyridazines of type 4 takes place via a formal [3+2]-cycloaddition of initially formed pyrrolidine-derived azomethine ylides 7. The mechanism leading to the final product is discussed.     

The chemistry of the fac-[Re(CO)2(NO)]2+ fragment in aqueous solution

The anions [ReX3(CO)2(NO)]- (with X = Cl, 1; X = Br, 2) have been prepared with different counterions. Complex 1 was found to lose its chloride ligands in water within 24 h. The [Re(H2O)3(CO)2(NO)]2+ cation obtained after hydrolysis is a strong acid, which consequently undergoes a slow condensation reaction in water to form the very stable [Re(mu3-O)(CO)2(NO)]4 cluster 4 at pH > 2, that precipitates from the aqueous solution and is insoluble also in organic solvents. Fast deprotonation of [Re(H2O)3(CO)2(NO)]2+ did not lead to 4 but rather to the mononuclear species [Re(OH)(H2O)2(CO)2(NO)]+. Subsequent attack of OH- at a CO group resulted in the formation of a rhenacarboxylic acid and its carboxylate anion. For solutions of even higher pH, IR spectroscopy provided evidence for the formation of a Re(C(O)ON(O)) species. These processes were found to be reversible on lowering the pH. Starting from cluster 4 it was possible to obtain complexes of the types [ReX(CO)2(NO)L2] or [Re(CO)2(NO)L3](L2 = 2-picolinate, 2,2'-bipyridine, L-phenylalanate; L3 = tris(pyrazolyl)methane, 1,4,7-trithiacyclononane) in the presence of an acid in protic solvents, but only in low yields. In further synthetic studies, complexes 1 and 2 were found to be superior starting materials for substitution reactions to form [ReX(CO)2(NO)L2] or [Re(CO)2(NO)L3] complexes.     

HO2 formation from the OH + benzene reaction in the presence of O2

In this study we investigated the secondary formation of HO(2) following the benzene + OH reaction in N(2) with variable O(2) content at atmospheric pressure and room temperature in the absence of NO. After pulsed formation of OH, HO(x) (= OH + HO(2)) and OH decay curves were measured by means of a laser-induced fluorescence technique (LIF). In synthetic air the total HO(2) yield was determined to be 0.69 ± 0.10 by comparison to results obtained with CO as a reference compound. HO(2) is expected to be a direct product of the reaction of the intermediately formed OH-benzene adduct with O(2). The HO(2) yield is slightly greater than the currently recommended yield of the proposed HO(2) co-product phenol (～53%). This hints towards other, minor HO(2) forming channels in the absence of NO, e.g. the formation of epoxide species that was proposed in the literature. For other test compounds upper limits of HO(2) yields of 0.10 (isoprene) and 0.05 (cyclohexane) were obtained, respectively. In further experiments at low O(2) concentrations (0.06-0.14% in N(2)) rate constants of (2.4 ± 1.1) × 10(-16) cm(3) s(-1) and (5.6 ± 1.1) × 10(-12) cm(3) s(-1) were estimated for the OH-benzene adduct reactions with O(2) and O(3), respectively. The rate constant of the unimolecular dissociation of the adduct back to benzene + OH was determined to be (3.9 ± 1.3) s(-1). The HO(2) yield at low O(2) was similar to that found in synthetic air, independent of O(2) and O(3) concentrations indicating comparable HO(2) yields for the adduct + O(2) and adduct + O(3) reactions.     

Vibrational excitation of CO in the reaction: O + CS → CO + S

The relative rates at which O + CS → CO + S populates individual vibrational levels of CO have been determined (a) from infrared chemiluminescence experiments, and (b) by using a cw CO lawer to measure CO vibrational distributions produced when mixtures of CS₂ + O₂ are flash photolysed.     

Rhodium(I)-catalyzed [4+2+2] cycloadditions of 1,3-dienes, alkenes, and alkynes for the synthesis of cyclooctadienes

The first [4+2+2] cycloadditions involving terminal alkynes and diene-enes, including a fully intramolecular example, are reported resulting in the formation of cyclooctadienes using [RhCl(CO)2]2 (5 mol %) treated with AgSbF6 (10 mol %) as a precatalyst. The reaction is general for a variety of terminal alkynes, as well as variously substituted diene-enes (yields up to 88%).