Si doping effect on self-organized InAs/GaAs quantum dots

In situ ultra high vacuum scanning probe microscopy (SPM) and low-temperature photoluminescence (PL) studies have been performed on Si-doped self-organized InAs/GaAs quantum dots samples to investigate the Si doping effects. Remarkably, when Si is doped in the sample, according to the SPM images, more small dots are formed when compared with images from undoped samples. On the PL spectra, high-energy band tail which correspond to the small dots appear, with increasing doping concentration, the integral intensity of the high-energy band tail account for the whole peak increase too. We relate this phenomenon to a model that takes the Si atom as the nucleation center for QDs formation.     

Temperature and excitation power dependence of the optical properties of InAs self-assembled quantum dots grown between two Al0.5Ga0.5As confining layers

We have investigated the temperature and excitation power dependence of photoluminescence properties of InAs self-assembled quantum dots grown between two Al_0.5Ga_0.5As quantum wells. The temperature evolutions of the lower- and higher-energy transition in the photoluminescence spectra have been observed. The striking result is that a higher-energy peak appears at 105 K and its relative intensity increases with temperature in the 105–291 K range. We demonstrate that the higher-energy peak corresponds to the excited-state transition involving the bound-electron state of quantum dots and the two-dimensional hole continuum of wetting layer. At higher temperature, the carrier transition associated with the wetting layer dominates the photoluminescence spectra. A thermalization model is given to explain the process of hole thermal transfer between wetting layer and quantum dots.     

Controllable cubic and hexagonal GaN growth on GaAs(0 0 1) substrates by molecular beam epitaxy

Two kinds of GaN samples were grown on GaAs(0 0 1) substrates. One is grown on nitridized GaAs surface, the other is grown on nitridized AlAs buffer GaAs substrate. X-ray diffraction and photoluminescence measurements find that the GaN sample directly grown on GaAs substrate is pure cubic phase and those grown on AlAs buffer is pure hexagonal phase. The present study shows that the phase of GaN samples grown on GaAs substrates can be controlled using different buffer layers.     

Self-assembled InAs quantum dots with two different matrix materials

The effects of matrix materials on the structural and optical properties of self-assembled InAs quantum dots (QDs) grown by a molecular beam epitaxy were investigated by atomic force microscopy, cross-sectional transmission electron microscopy (TEM), and photoluminescence (PL) spectroscopy. Cross-sectional TEM image indicated that the average lateral size and height of InAs QDs in a GaAs matrix on a GaAs substrate were 20.5 and 5.0 nm, respectively, which showed the PL peak position of 1.19 μm at room temperature. The average lateral size and height of InAs QDs buried in an InAlGaAs matrix on InP were 26.5 and 3.0 nm, respectively. The PL peak position for InP-based InAs QDs was around 1.55 μm at room temperature. If we only consider the size quantization effects, the difference in PL peak position between two QD systems with different matrices may be too large. The large difference in peak position can be mainly related to the QD size as well as the strain between the QDs and the matrix materials. The intermixing between the QDs and the matrix materials can partially change the In composition of QDs, resulting in the modification of the optical properties.     

Kinetics of dopant incorporation in GaAs grown by organometallic vapor-phase epitaxy

A diffusive capture reaction of dopant atoms by relevant host atoms, via the Rideal–Eley mechanism, in GaAs grown by organometallic vapor-phase epitaxy is shown to result in the dopant concentration in the crystal acquiring a dependence on p_Ga (which is proportional to the growth rate) in agreement with data on S_As, Zn_Ga, and Si_Ga where p_Ga is the partial pressure of trimethylgallium in the input gas stream.     

Formation of Ge-diffusion-suppressed GaAs layers and InAs quantum dots on Ge/Si substrates

Crystal growth of GaAs layers and InAs quantum dots (QDs) on the GaAs layers was investigated on Ge/Si substrates using ultrahigh vacuum chemical vapor deposition. Ga-rich GaAs with anti-site Ga atoms grown at a low V/III ratio was found to suppress the diffusion of Ge into GaAs. S-K mode QD formation was observed on GaAs layers grown on Ge/Si substrates with Ga-rich GaAs initial layers, and improved photoluminescence from 1.3 μm-emitting InAs QDs was demonstrated.     

Formation and dissolution of InAs quantum dots on GaAs

In situ reflection high energy electron diffraction (RHEED) has been used to study the time evolution during self-assembled molecular beam epitaxy (MBE) growth of InAs quantum dots on GaAs. Using a special data acquisition technique, two characteristic time constants are determined very precisely: the time t_c up to the first appearance of InAs dots and the time t_f it takes to complete the 2D–3D transition of all islands. Surprisingly, we find that t_c increases with temperature which disagrees with a thermally activated process. In contrast to this, t_f behaves Arrhenius-like and an activation energy of E_f0.39 eV is determined. Furthermore, the sum t_c+t_f does not depend significantly on temperature and corresponds to an InAs coverage of 2.0 monolayers. A second focus of this paper is the study of dissolution of InAs dots after interruption of the As flux. From the experiments, an activation energy of 3.2 eV for desorption of In located on top of the wetting layer is determined, whereas direct desorption from the wetting layer corresponds to an activation energy of 3.4 eV.     

Structural and photoluminescence characteristics of molecular beam epitaxy-grown vertically aligned In0.33Ga0.67As/GaAs quantum dots

In this paper, we present the results of structural and photoluminescence (PL) studies on vertically aligned, 20-period In_0.33Ga_0.67As/GaAs quantum dot stacks, grown by molecular beam epitaxy (MBE). Two different In_0.33Ga_0.67As/GaAs quantum dot stacks were compared. In one case, the In_0.33Ga_0.67As layer thickness was chosen to be just above its transition thickness, and in the other case, the In_0.33Ga_0.67As layer thickness was chosen to be 30% larger than its transition thickness. The 2D–3D growth mode transition time was determined using reflection high-energy electron diffraction (RHEED). Structural studies were done on these samples using high-resolution X-ray diffraction (HRXRD) and cross-sectional transmission electron microscopy (XTEM). A careful analysis showed that the satellite peaks recorded in X-ray rocking curve show two types of periodicities in one sample. We attribute this additional periodicity to the presence of an aligned vertical stack of quantum dots. We also show that the additional periodicity is not significant in a sample in which the quantum dots are not prominently formed. By analyzing the X-ray rocking curve in conjunction with RHEED and PL, we have estimated the structural parameters of the quantum dot stack. These parameters agree well with those obtained from XTEM measurements.     

Characterization of InAs quantum dots on lattice-matched InAlGaAs/InP superlattice structures

Self-assembled InAs quantum dots (QDs) in an InAlGaAs matrix, lattice-matched to InP substrate, have been grown by molecular beam epitaxy (MBE). Transmission electron microscopy (TEM), double-crystal X-ray diffraction (DCXRD) and photoluminescence (PL) are used to study their structural and optical properties. In InAs/InAlGaAs/InP system, we propose that when the thickness of InAs layer deposited is small, the random strain distribution of the matrix layer results in the formation of tadpole-shaped QDs with tails towards random directions, while the QDs begin to turn into dome-shaped and then coalesce to form islands with larger size and lower density to release the increasing misfit strain with the continuous deposition of InAs. XRD rocking curves showing the reduced strain with increasing thickness of InAs layer may also support our notion. The results of PL measurements are in well agreement with that of TEM images.     

Effect of arsenic species on the kinetics of GaAs nanowires growth by molecular beam epitaxy

GaAs nanowires (NWs) are grown on GaAs (1 1 1) B substrates in a molecular beam epitaxy system, by Au-assisted vapor–liquid–solid growth. We compare the characteristics of NWs elaborated with As₂ or As₄ molecules. In a wide range of growth temperatures, As₄ leads to growth rates twice faster than As₂. The shape of the NWs also depends on the arsenic species: with As₄, regular rods can be obtained, while pencil-like shape results from growth with As₂. From the analysis of the incoming fluxes, which contributes to the NWs formation, we conclude that the diffusion length of Ga adatoms along the NW sidewalls is smaller under As₂ flux as compared to that under As₄ flux. It follows that As₂ flux is favourable to the formation of radial heterostructures, whereas As₄ flux is preferable to maintain pure axial growth.     

Anomalous temperature-dependent photoluminescence characteristic of as-grown GaInNAs/GaAs quantum well grown by solid source molecular beam epitaxy

The photoluminescence (PL) mechanisms of as-grown GaInNAs/GaAs quantum well were investigated by temperature-dependent PL measurements. An anomalous two-segmented trend in the PL peak energy vs. temperature curve was observed, which has higher and lower temperature-dependent characteristics at low temperature (5–80 K) and high temperature (above 80 K), respectively. The low and high-temperature segments were fitted with two separate Varshni fitting curves, namely Fit_low and Fit_high, respectively, as the low-temperature PL mechanism is dominated by localized PL transitions while the high-temperature PL mechanism is dominated by the e1–hh1 PL transition. Further investigation of the PL efficiency vs. 1/kT relationship suggests that the main localized state is located at 34 meV below the e1 state. It is also found that the temperature (80 K) at which the PL full-width at half-maximum changes from linear trend to almost constant trend correlates well with the temperature at which the PL peak energy vs. temperature curve changes from Fit_low to Fit_high.     

Nucleation and ripening of seeded InAs/GaAs quantum dots

We have investigated the nucleation and ripening of pairs of InAs/GaAs quantum dot layers separated by thin (2–20 nm) GaAs spacer layers. Reflection high energy electron diffraction (RHEED) measurements show that the 2D–3D transition in the second layer can occur for less than 1 monolayer deposition of InAs. Immediately after the islanding transition in the second layer chevrons were observed with included angles as low as 20° and this angle was seen to increase continuously to 45±2° as more material was deposited. Atomic force microscopy showed the dot density in both layers to be the same. It is proposed that surface morphology can radically alter processes that determine the nucleation and ripening of the 3D islands.     

AFM analysis of sidewall formation in low angle incidence microchannel epitaxy of GaAs

In this paper we show a detailed AFM observation of GaAs epilayers grown on GaAs (0 0 1) substrate patterned with SiO₂ mask by low angle incidence microchannel epitaxy (LAIMCE). We have found that low index facets are formed as sidewalls of the epilayers grown in open window aligned along singular directions. We have also found that low index facets are formed as sidewalls for epilayers showing a zigzagging edge. In the case of the epilayers grown in an open window aligned 10° off [0 1 0], for which lateral growth is maximum, we have found round shape sidewalls and (0 0 1) terraces at the boundary of the sidewall and the top surface. We concluded that the lateral growth proceeds when the sidewall is rough, while it stops when low index facets are formed as sidewalls.     

Step annealing effects on the structural and optical properties of InAs quantum dots grown on GaAs

The effects of multi-step rapid thermal annealing (RTA) for the self-assembled InAs quantum dots (QDs), which were grown by a molecular beam epitaxy (MBE), were investigated through photoluminescence (PL) and transmission electron microscopy (TEM). Postgrowth multi-step RTA was used to modify the structural and optical properties of the self-assembled InAs QDs. Postgrowth multi-step RTAs are as follows: one step (20 s at 750 °C); two step (20 s at 650 °C, 20 s at 750 °C); three step (30 s at 450 °C, 20 s at 650 °C, 20 s at 750 °C). It is found that significant narrowing of the luminescence linewidth (from 132 to 31 meV) from the InAs QDs occurs together with about 150 meV blueshift by two-step annealing, compared to as-grown InAs QDs. Observation of transmission electron microscopy (TEM) shows the existence of the dots under one- and two-step annealing but the disappearance of the dots by three-step annealing. Comparing with the samples under only one-step annealing, we demonstrate a significant enhancement of the interdiffusion in the dot layer under multi-step annealing.     

Structure and optical properties of self-assembled InAs/GaAs quantum dots with In0.15Ga0.85As underlying layer

A high density of 1.02×10¹¹ cm⁻² of InAs islands with In_0.15Ga_0.85As underlying layer has been achieved on GaAs (1 0 0) substrate by solid source molecular beam epitaxy. Atomic force microscopy and PL spectra show the size evolution of InAs islands. A 1.3 μm photoluminescence (PL) from InAs islands with In_0.15Ga_0.85As underlying layer and InGaAs strain-reduced layer has been obtained. Our results provide important information for optimizing the epitaxial structures of 1.3 μm wavelength quantum dots devices.     

Droplet epitaxy of zinc-blende GaN quantum dots

Zinc-blende GaN quantum dots were grown on 3C-AlN(0 0 1) by a vapor–liquid–solid process in a molecular beam epitaxy system. We were able to control the density of the quantum dots in a range of 5×10⁸–5×10¹² cm⁻². Photoluminescence spectroscopy confirmed the optical activity of the GaN quantum dots in a range of 10¹¹–5×10¹² cm⁻². The data obtained give an insight to the condensation mechanism of the vapor–liquid–solid process in general, because the GaN quantum dots condense in metastable zinc-blende crystal structure supplied by the substrate, and not in the wurtzite crystal structure expected from free condensation in the droplet.     

The incorporation behavior of arsenic and antimony in GaAsSb/GaAs grown by solid source molecular beam epitaxy

GaAsSb ternary epitaxial layers were grown on GaAs (0 0 1) substrate in various Sb₄/As₂ flux ratios by solid source molecular beam epitaxy. The alloy compositions of GaAs_1−ySb_y were inferred using high-resolution X-ray symmetric (0 0 4) and asymmetric (2 2 4) glance exit diffraction. The non-equilibrium thermodynamic model is used to explain the different incorporation behavior between the Sb₄ and As₂ under the assumption that one incident Sb₄ molecule produces one active Sb₂ molecule. It is inferred that the activation energy of Sb₄ dissociation is about 0.46 eV. The calculated results for the incorporation efficiency of group V are in good agreement with the experimental data.